- 16 Oct, 2023 8 commits
-
-
Beniamino Galvani authored
The route lookup can be done now via generic function udp_tunnel_dst_lookup() to replace the custom implementation in geneve_get_v4_rt(). Suggested-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Beniamino Galvani authored
Add a helper function to compute the tos/dsfield. In this way, we can factor out some duplicate code. Also, the helper will be called from more places in the next commit. Suggested-by:
-
Beniamino Galvani authored
Commit 451ef36b ("ip_tunnels: Add new flow flags field to ip_tunnel_key") added a new field to struct ip_tunnel_key to control route lookups. Currently the flag is used by vxlan and geneve tunnels; use it also in udp_tunnel_dst_lookup() so that it affects all tunnel types relying on this function. Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Beniamino Galvani authored
We want to make the function more generic so that it can be used by other UDP tunnel implementations such as geneve and vxlan. To do that, add the following arguments: - source and destination UDP port; - ifindex of the output interface, needed by vxlan; - the tos, because in some cases it is not taken from struct ip_tunnel_info (for example, when it's inherited from the inner packet); - the dst cache, because not all tunnel types (e.g. vxlan) want to use the one from struct ip_tunnel_info. With these parameters, the function no longer needs the full struct ip_tunnel_info as argument and we can pass only the relevant part of it (struct ip_tunnel_key). Suggested-by:
-
Beniamino Galvani authored
The function is now UDP-specific, the protocol is always IPPROTO_UDP. Suggested-by:
-
Beniamino Galvani authored
At the moment ip_route_output_tunnel() is used only by bareudp. Ideally, other UDP tunnel implementations should use it, but to do so the function needs to accept new parameters that are specific for UDP tunnels, such as the ports. Prepare for these changes by renaming the function to udp_tunnel_dst_lookup() and move it to file net/ipv4/udp_tunnel_core.c. Suggested-by:
-
zhujun2 authored
These variables are never referenced in the code, just remove them Signed-off-by:
zhujun2 <zhujun2@cmss.chinamobile.com> Signed-off-by:
-
Christian Marangi authored
Simplify logic for rspq_check_napi. Drop redundant and wrong napi_is_scheduled call as it's not race free and directly use the output of napi_schedule to understand if a napi is pending or not. rspq_check_napi main logic is to check if is_new_response is true and check if a napi is not scheduled. The result of this function is then used to detect if we are missing some interrupt and act on top of this... With this knowing, we can rework and simplify the logic and make it less problematic with testing an internal bit for napi. Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
- 15 Oct, 2023 32 commits
-
-
David S. Miller authored
Xabier Marquiegui says: ==================== ptp: Support for multiple filtered timestamp event queue readers On systems with multiple timestamp event channels, there can be scenarios where multiple userspace readers want to access the timestamping data for various purposes. One such example is wanting to use a pps out for time synchronization, and wanting to timestamp external events with the synchronized time base simultaneously. Timestmp event consumers on the other hand, are often interested in a subset of the available timestamp channels. linuxptp ts2phc, for example, is not happy if more than one timestamping channel is active on the device it is reading from. Linked lists are introduced to support multiple timestamp event queue consumers, and timestamp event channel filters through IOCTLs, as well as a debugfs interface to do some simple verifications. Xabier Marquiegui (6): posix-clock: introduce posix_clock_context concept ptp: Replace timestamp event queue with linked list ptp: support multiple timestamp event readers ptp: support event queue reader channel masks ptp: add debugfs interface to see applied channel masks ptp: add testptp mask test drivers/ptp/ptp_chardev.c | 129 ++++++++++++++++---- drivers/ptp/ptp_clock.c | 45 ++++++- drivers/ptp/ptp_private.h | 28 +++-- drivers/ptp/ptp_sysfs.c | 13 +- include/linux/posix-clock.h | 35 ++++-- include/uapi/linux/ptp_clock.h | 2 + kernel/time/posix-clock.c | 36 ++++-- tools/testing/selftests/ptp/ptpchmaskfmt.sh | 14 +++ tools/testing/selftests/ptp/testptp.c | 19 ++- 9 files changed, 261 insertions(+), 60 deletions(-) create mode 100644 tools/testing/selftests/ptp/ptpchmaskfmt.sh --- v6: - correct commit message - correct coding style v5: https://lore.kernel.org/netdev/cover.1696804243.git.reibax@gmail.com/ - fix spelling on commit message - fix memory leak on ptp_open v4: https://lore.kernel.org/netdev/cover.1696511486.git.reibax@gmail.com/ - split modifications in different patches for improved organization - rename posix_clock_user to posix_clock_context - remove unnecessary flush_users clock operation - remove unnecessary tests - simpler queue clean procedure - fix/clean comment lines - simplified release procedures - filter modifications exclusive to currently open instance for simplicity and security - expand mask to 2048 channels - make more secure and simple: mask is only applied to the testptp instance. Use debugfs to verify effects. v3: https://lore.kernel.org/netdev/20230928133544.3642650-1-reibax@gmail.com/ - add this patchset overview file - fix use of safe and non safe linked lists for loops - introduce new posix_clock private_data and ida object ids for better dicrimination of timestamp consumers - safer resource release procedures - filter application by object id, aided by process id - friendlier testptp implementation of event queue channel filters v2: https://lore.kernel.org/netdev/20230912220217.2008895-1-reibax@gmail.com/ - fix ptp_poll() return value - Style changes to comform to checkpatch strict suggestions - more coherent ptp_read error exit routines - fix testptp compilation error: unknown type name 'pid_t' - rename mask variable for easier code traceability - more detailed commit message with two examples v1: https://lore.kernel.org/netdev/20230906104754.1324412-2-reibax@gmail.com/ ==================== Signed-off-by:
Xabier Marquiegui <reibax@gmail.com> Suggested-by:
Richard Cochran <richardcochran@gmail.com> Suggested-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Xabier Marquiegui authored
Add option to test timestamp event queue mask manipulation in testptp. Option -F allows the user to specify a single channel that will be applied on the mask filter via IOCTL. The test program will maintain the file open until user input is received. This allows checking the effect of the IOCTL in debugfs. eg: Console 1: ``` Channel 12 exclusively enabled. Check on debugfs. Press any key to continue ``` Console 2: ``` 0x00000000 0x00000001 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 ``` Signed-off-by:
-
Xabier Marquiegui authored
Use debugfs to be able to view channel mask applied to every timestamp event queue. Every time the device is opened, a new entry is created in `$DEBUGFS_MOUNTPOINT/ptpN/$INSTANCE_ADDRESS/mask`. The mask value can be viewed grouped in 32bit decimal values using cat, or converted to hexadecimal with the included `ptpchmaskfmt.sh` script. 32 bit values are listed from least significant to most significant. Signed-off-by:
-
Xabier Marquiegui authored
On systems with multiple timestamp event channels, some readers might want to receive only a subset of those channels. Add the necessary modifications to support timestamp event channel filtering, including two IOCTL operations: - Clear all channels - Enable one channel The mask modification operations will be applied exclusively on the event queue assigned to the file descriptor used on the IOCTL operation, so the typical procedure to have a reader receiving only a subset of the enabled channels would be: - Open device file - ioctl: clear all channels - ioctl: enable one channel - start reading Calling the enable one channel ioctl more than once will result in multiple enabled channels. Signed-off-by:
-
Xabier Marquiegui authored
Use linked lists to create one event queue per open file. This enables simultaneous readers for timestamp event queues. Signed-off-by:
-
Xabier Marquiegui authored
Introduce linked lists to access the timestamp event queue. Signed-off-by:
-
Xabier Marquiegui authored
Add the necessary structure to support custom private-data per posix-clock user. The previous implementation of posix-clock assumed all file open instances need access to the same clock structure on private_data. The need for individual data structures per file open instance has been identified when developing support for multiple timestamp event queue users for ptp_clock. Signed-off-by:
-
David S. Miller authored
Arkadiusz Kubalewski says: ==================== dpll: add phase-offset and phase-adjust Improve monitoring and control over dpll devices. Allow user to receive measurement of phase difference between signals on pin and dpll (phase-offset). Allow user to receive and control adjustable value of pin's signal phase (phase-adjust). v4->v5: - rebase series on top of net-next/main, fix conflict - remove redundant attribute type definition in subset definition v3->v4: - do not increase do version of uAPI header as it is not needed (v3 did not have this change) - fix spelling around commit messages, argument descriptions and docs - add missing extack errors on failure set callbacks for pin phase adjust and frequency - remove ice check if value is already set, now redundant as checked in the dpll subsystem v2->v3: - do not increase do version of uAPI header as it is not needed v1->v2: - improve handling for error case of requesting the phase adjust set - align handling for error case of frequency set request with the approach introduced for phase adjust ==================== Signed-off-by: -
Arkadiusz Kubalewski authored
Align the approach of pin frequency set behavior with the approach introduced with pin phase adjust set. Fail the request if any of devices did not registered the callback ops. If callback op on any pin's registered device fails, return error and rollback the value to previous one. Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by:
-
Arkadiusz Kubalewski authored
Implement new callback ops related to measurement and adjustment of signal phase for pin-dpll in ice driver. Signed-off-by:
-
Arkadiusz Kubalewski authored
Add callback ops for pin-dpll phase measurement. Add callback for pin signal phase adjustment. Add min and max phase adjustment values to pin proprties. Invoke callbacks in dpll_netlink.c when filling the pin details to provide user with phase related attribute values. Signed-off-by:
-
Arkadiusz Kubalewski authored
Add attributes for providing the user with: - measurement of signals phase offset between pin and dpll - ability to adjust the phase of pin signal Signed-off-by:
-
Arkadiusz Kubalewski authored
Add documentation on: - measurement of phase of signal between pin and dpll - adjustment of pin signal phase Signed-off-by:
-
David S. Miller authored
Ivan Vecera says: ==================== i40e: Add basic devlink support The series adds initial support for devlink to i40e driver. Patch-set overview: Patch 1: Adds initial devlink support (devlink and port registration) Patch 2: Refactors and split i40e_nvm_version_str() Patch 3: Adds support for 'devlink dev info' Patch 4: Refactors existing helper function to read PBA ID Patch 5: Adds 'board.id' to 'devlink dev info' using PBA ID ==================== Signed-off-by: -
Ivan Vecera authored
Expose stored PBA ID string as unique board identifier via devlink's .info_get command. Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Ivan Vecera authored
Function i40e_read_pba_string() is currently unused but will be used by subsequent patch to provide board ID via devlink device info. The function reads PBA block from NVM so it cannot be called during adapter reset and as we would like to provide PBA ID via devlink info it is better to read the PBA ID during i40e_probe() and cache it in i40e_hw structure to avoid a waiting for potential adapter reset in devlink info callback. So... - Remove pba_num and pba_num_size arguments from the function, allocate resource managed buffer to store PBA ID string and save resulting pointer to i40e_hw->pba_id field - Make the function void as the PBA ID can be missing and in this case (or in case of NVM reading failure) the i40e_hw->pba_id will be NULL - Rename the function to i40e_get_pba_string() to align with other functions like i40e_get_oem_version() i40e_get_port_mac_addr()... - Call this function on init during i40e_probe() Signed-off-by:
-
Ivan Vecera authored
Provide devlink .info_get callback to allow the driver to report detailed version information. The following info is reported: "serial_number" -> The PCI DSN of the adapter "fw.mgmt" -> The version of the firmware "fw.mgmt.api" -> The API version of interface exposed over the AdminQ "fw.psid" -> The version of the NVM image "fw.bundle_id" -> Unique identifier for the combined flash image "fw.undi" -> The combo image version With this, 'devlink dev info' provides at least the same amount information as is reported by ETHTOOL_GDRVINFO: $ ethtool -i enp2s0f0 | egrep '(driver|firmware)' driver: i40e firmware-version: 9.30 0x8000e5f3 1.3429.0 $ devlink dev info pci/0000:02:00.0 pci/0000:02:00.0: driver i40e serial_number c0-de-b7-ff-ff-ef-ec-3c versions: running: fw.mgmt 9.130.73618 fw.mgmt.api 1.15 fw.psid 9.30 fw.bundle_id 0x8000e5f3 fw.undi 1.3429.0 Signed-off-by: -
Ivan Vecera authored
The function formats NVM version string according adapter's EETrackID value. If this value OEM specific (0xffffffff) then the reported version is with format: "<gen>.<snap>.<release>" and in other case "<nvm_maj>.<nvm_min> <eetrackid> <cvid_maj>.<cvid_bld>.<cvid_min>" These versions are reported in the subsequent patch in this series that implements devlink .info_get but separately. So split the function into separate ones, refactor it to use them and remove ugly static string buffer. Additionally convert NVM/OEM version mask macros to use GENMASK and use FIELD_GET/FIELD_PREP for them in i40e_nvm_version_str() and i40e_get_oem_version(). This makes code more readable and allows us to remove related shift macros. Signed-off-by:
-
Ivan Vecera authored
Add an initial support for devlink interface to i40e driver. Similarly to ice driver the implementation doe not enable devlink to manage device-wide configuration and devlink instance is created for each physical function of PCIe device. Signed-off-by:
-
Pavan Chebbi authored
When we are trying to timestamp a TX packet, there may be occasions when the TX timestamp register is still not updated with the latest timestamp even if the timestamp packet descriptor is marked as complete. This usually happens in cases where the system is under stress or flow control is affecting the transmit side. We will solve this problem by saving the snapshot of the timestamp register when we are posting the TX descriptor. At this time, the register contains previously timestamped packet's value and valid timestamp of the current packet must be different than this. Upon completion of the current descriptor, we will check if the timestamp register is updated or not before timestamping the skb. If not updated, we will schedule the ptp worker to fetch the updated time later and timestamp the skb. Also now we restrict number of outstanding PTP TX packet requests to 1. Reported-by:
Simon White <Simon.White@viavisolutions.com> Link: https://lore.kernel.org/netdev/CACKFLikGdN9XPtWk-fdrzxdcD=+bv-GHBvfVfSpJzHY7hrW39g@mail.gmail.com/Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
-
Jakub Kicinski authored
Add a section to netdev maintainer doc encouraging reviewers to chime in on the mailing list. The questions about "when is it okay to share feedback" keep coming up (most recently at netconf) and the answer is "pretty much always". Extend the section of 7.AdvancedTopics.rst which deals with reviews a little bit to add stuff we had been recommending locally. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== sfc: support conntrack NAT offload The EF100 MAE supports performing NAT (and NPT) on packets which match in the conntrack table. This series adds that capability to the driver. ==================== Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Edward Cree authored
If an IP address and/or L4 port for NAPT is available from a CT match, the MAE will perform the edits; if no CT lookup has been performed for this packet, the CT lookup did not return a match, or the matched CT entry did not include NAPT, the action will have no effect. Reviewed-by:
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Edward Cree authored
The MAE can edit either address, L4 port, or both, for either source or destination. These can't be mixed; i.e. it can edit source addr and source port, but not (say) source addr and dest port. Reviewed-by:
-
David S. Miller authored
Arseniy Krasnov says: ==================== vsock/virtio/vhost: MSG_ZEROCOPY preparations this patchset is first of three parts of another big patchset for MSG_ZEROCOPY flag support: https://lore.kernel.org/netdev/20230701063947.3422088-1-AVKrasnov@sberdevices.ru/ During review of this series, Stefano Garzarella <sgarzare@redhat.com> suggested to split it for three parts to simplify review and merging: 1) virtio and vhost updates (for fragged skbs) <--- this patchset 2) AF_VSOCK updates (allows to enable MSG_ZEROCOPY mode and read tx completions) and update for Documentation/. 3) Updates for tests and utils. This series enables handling of fragged skbs in virtio and vhost parts. Newly logic won't be triggered, because SO_ZEROCOPY options is still impossible to enable at this moment (next bunch of patches from big set above will enable it). I've included changelog to some patches anyway, because there were some comments during review of last big patchset from the link above. Head for this patchset is: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=f2fa1c812c91e99d0317d1fc7d845e1e05f39716 Link to v1: https://lore.kernel.org/netdev/20230717210051.856388-1-AVKrasnov@sberdevices.ru/ Link to v2: https://lore.kernel.org/netdev/20230718180237.3248179-1-AVKrasnov@sberdevices.ru/ Link to v3: https://lore.kernel.org/netdev/20230720214245.457298-1-AVKrasnov@sberdevices.ru/ Link to v4: https://lore.kernel.org/netdev/20230727222627.1895355-1-AVKrasnov@sberdevices.ru/ Link to v5: https://lore.kernel.org/netdev/20230730085905.3420811-1-AVKrasnov@sberdevices.ru/ Link to v6: https://lore.kernel.org/netdev/20230814212720.3679058-1-AVKrasnov@sberdevices.ru/ Link to v7: https://lore.kernel.org/netdev/20230827085436.941183-1-avkrasnov@salutedevices.com/ Link to v8: https://lore.kernel.org/netdev/20230911202234.1932024-1-avkrasnov@salutedevices.com/ Changelog: v3 -> v4: * Patchset rebased and tested on new HEAD of net-next (see hash above). v4 -> v5: * See per-patch changelog after ---. v5 -> v6: * Patchset rebased and tested on new HEAD of net-next (see hash above). * See per-patch changelog after ---. v6 -> v7: * Patchset rebased and tested on new HEAD of net-next (see hash above). * See per-patch changelog after ---. v7 -> v8: * Patchset rebased and tested on new HEAD of net-next (see hash above). * See per-patch changelog after ---. v8 -> v9: * Patchset rebased and tested on new HEAD of net-next (see hash above). * See per-patch changelog after ---. ==================== Signed-off-by:
-
Arseniy Krasnov authored
This adds set of tests which use io_uring for rx/tx. This test suite is implemented as separated util like 'vsock_test' and has the same set of input arguments as 'vsock_test'. These tests only cover cases of data transmission (no connect/bind/accept etc). Signed-off-by:
Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Arseniy Krasnov authored
To use this option pass '--zerocopy' parameter: ./vsock_perf --zerocopy --sender <cid> ... With this option MSG_ZEROCOPY flag will be passed to the 'send()' call. Signed-off-by:
-
Arseniy Krasnov authored
This adds three tests for MSG_ZEROCOPY feature: 1) SOCK_STREAM tx with different buffers. 2) SOCK_SEQPACKET tx with different buffers. 3) SOCK_STREAM test to read empty error queue of the socket. Patch also works as preparation for the next patches for tools in this patchset: vsock_perf and vsock_uring_test: 1) Adds several new functions to util.c - they will be also used by vsock_uring_test. 2) Adds two new functions for MSG_ZEROCOPY handling to a new source file - such source will be shared between vsock_test, vsock_perf and vsock_uring_test, thus avoiding code copy-pasting. Signed-off-by:
-
Arseniy Krasnov authored
This adds description of MSG_ZEROCOPY flag support for AF_VSOCK type of socket. Signed-off-by:
-
Arseniy Krasnov authored
For AF_VSOCK, zerocopy tx mode depends on transport, so this option must be set in AF_VSOCK implementation where transport is accessible (if transport is not set during setting SO_ZEROCOPY: for example socket is not connected, then SO_ZEROCOPY will be enabled, but once transport will be assigned, support of this type of transmission will be checked). To handle SO_ZEROCOPY, AF_VSOCK implementation uses SOCK_CUSTOM_SOCKOPT bit, thus handling SOL_SOCKET option operations, but all of them except SO_ZEROCOPY will be forwarded to the generic handler by calling 'sock_setsockopt()'. Signed-off-by:
-
Arseniy Krasnov authored
Add 'msgzerocopy_allow()' callback for loopback transport. Signed-off-by:
-
Arseniy Krasnov authored
Add 'msgzerocopy_allow()' callback for virtio transport. Signed-off-by:
-
