- 25 May, 2017 12 commits
-
-
Peter Huewe authored
commit 975094dd upstream. Abort the transfer with ETIMEDOUT when the TPM signals more than TPM_RETRY wait states. Continuing with the transfer in this state will only lead to arbitrary failures in other parts of the code. Fixes: 0edbfea5 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by:
Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by:
Peter Huewe <peter.huewe@infineon.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by:
Benoit Houyere <benoit.houyere@st.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Huewe authored
commit f848f214 upstream. The algorithm for sending data to the TPM is mostly identical to the algorithm for receiving data from the TPM, so a single function is sufficient to handle both cases. This is a prequisite for all the other fixes, so we don't have to fix everything twice (send/receive) v2: u16 instead of u8 for the length. Fixes: 0edbfea5 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by:
-
Amir Goldstein authored
commit 4ff33aaf upstream. When delivering an event to userspace for a file on an NFS share, if the file is deleted on server side before user reads the event, user will not get the event. If the event queue contained several events, the stale event is quietly dropped and read() returns to user with events read so far in the buffer. If the event queue contains a single stale event or if the stale event is a permission event, read() returns to user with the kernel internal error code 518 (EOPENSTALE), which is not a POSIX error code. Check the internal return value -EOPENSTALE in fanotify_read(), just the same as it is checked in path_openat() and drop the event in the cases that it is not already dropped. This is a reproducer from Marko Rauhamaa: Just take the example program listed under "man fanotify" ("fantest") and follow these steps: ============================================================== NFS Server NFS Client(1) NFS Client(2) ============================================================== # echo foo >/nfsshare/bar.txt # cat /nfsshare/bar.txt foo # ./fantest /nfsshare Press enter key to terminate. Listening for events. # rm -f /nfsshare/bar.txt # cat /nfsshare/bar.txt read: Unknown error 518 cat: /nfsshare/bar.txt: Operation not permitted ============================================================== where NFS Client (1) and (2) are two terminal sessions on a single NFS Client machine. Reported-by:
Marko Rauhamaa <marko.rauhamaa@f-secure.com> Tested-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Marc Dietrich authored
commit 0c18927f upstream. Current U-Boot enables the display already. Marking the regulator as enabled on boot fixes sporadic panel initialization failures. Signed-off-by:
Marc Dietrich <marvin24@gmx.de> Tested-by:
Misha Komarovskiy <zombah@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Jeeja KP authored
commit 96001376 upstream. Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq()) causes hard lockup so unlock while waiting using jiffies. ---<-snip->--- <0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 <4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem <4>[ 1211.603053] irq event stamp: 13366 <4>[ 1211.603053] hardirqs last enabled at (13365): ... <4>[ 1211.603059] Call Trace: <4>[ 1211.603059] ? delay_tsc+0x3d/0xc0 <4>[ 1211.603059] __delay+0xa/0x10 <4>[ 1211.603060] __const_udelay+0x31/0x40 <4>[ 1211.603060] snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core] <4>[ 1211.603060] ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel] <4>[ 1211.603061] snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core] <4>[ 1211.603061] azx_stop_chip+0x9/0x10 [snd_hda_codec] <4>[ 1211.603061] azx_suspend+0x72/0x220 [snd_hda_intel] <4>[ 1211.603061] pci_pm_suspend+0x71/0x140 <4>[ 1211.603062] dpm_run_callback+0x6f/0x330 <4>[ 1211.603062] ? pci_pm_freeze+0xe0/0xe0 <4>[ 1211.603062] __device_suspend+0xf9/0x370 <4>[ 1211.603062] ? dpm_watchdog_set+0x60/0x60 <4>[ 1211.603063] async_suspend+0x1a/0x90 <4>[ 1211.603063] async_run_entry_fn+0x34/0x160 <4>[ 1211.603063] process_one_work+0x1f4/0x6d0 <4>[ 1211.603063] ? process_one_work+0x16e/0x6d0 <4>[ 1211.603064] worker_thread+0x49/0x4a0 <4>[ 1211.603064] kthread+0x107/0x140 <4>[ 1211.603064] ? process_one_work+0x6d0/0x6d0 <4>[ 1211.603065] ? kthread_create_on_node+0x40/0x40 <4>[ 1211.603065] ret_from_fork+0x2e/0x40 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419 Fixes: 38b19ed7 ("ALSA: hda: fix to wait for RIRB & CORB DMA to set") Reported-by:
Marta Lofstedt <marta.lofstedt@intel.com> Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jeeja KP <jeeja.kp@intel.com> Acked-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Alexander Steffen authored
commit 302a6ad7 upstream. TIS v1.3 for TPM 1.2 and PTP for TPM 2.0 disagree about which timeout value applies to reading a valid burstcount. It is TIMEOUT_D according to TIS, but TIMEOUT_A according to PTP, so choose the appropriate value depending on whether we deal with a TPM 1.2 or a TPM 2.0. This is important since according to the PTP TIMEOUT_D is much smaller than TIMEOUT_A. So the previous implementation could run into timeouts with a TPM 2.0, even though the TPM was behaving perfectly fine. During tpm2_probe TIMEOUT_D will be used even with a TPM 2.0, because TPM_CHIP_FLAG_TPM2 is not yet set. This is fine, since the timeout values will only be changed afterwards by tpm_get_timeouts. Until then TIS_TIMEOUT_D_MAX applies, which is large enough. Fixes: aec04cbd ("tpm: TPM 2.0 FIFO Interface") Signed-off-by:
-
Vamsi Krishna Samavedam authored
commit 2f964780 upstream. Format specifier %p can leak kernel addresses while not valuing the kptr_restrict system settings. When kptr_restrict is set to (1), kernel pointers printed using the %pK format specifier will be replaced with Zeros. Debugging Note : &pK prints only Zeros as address. If you need actual address information, write 0 to kptr_restrict. echo 0 > /proc/sys/kernel/kptr_restrict [Found by poking around in a random vendor kernel tree, it would be nice if someone would actually send these types of patches upstream - gkh] Signed-off-by:
Vamsi Krishna Samavedam <vskrishn@codeaurora.org> Signed-off-by:
-
Willy Tarreau authored
commit 3e21f4af upstream. The lp_setup() code doesn't apply any bounds checking when passing "lp=none", and only in this case, resulting in an overflow of the parport_nr[] array. All versions in Git history are affected. Reported-By:
Roee Hay <roee.hay@hcl.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Johan Hovold authored
commit 46c319b8 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Alan Stern authored
commit 628c2893 upstream. The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on the stack, which doesn't work with vmapped stacks. This patch fixes the problem by allocating a separate 512-byte buffer at probe time and using it for all of the offending I/O operations. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by:
-
Maksim Salau authored
commit 0bd193d6 upstream. get_version_reply is not freed if function returns with success. Fixes: 942a4873 ("usb: misc: legousbtower: Fix buffers on stack") Reported-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Maksim Salau <maksim.salau@gmail.com> Signed-off-by:
-
Maksim Salau authored
commit 942a4873 upstream. Allocate buffers on HEAP instead of STACK for local structures that are to be received using usb_control_msg(). Signed-off-by:
Alfredo Rafael Vicente Boix <alviboi@gmail.com> Signed-off-by:
-
- 20 May, 2017 28 commits
-
-
Greg Kroah-Hartman authored
-
Kees Cook authored
commit 6330d553 upstream. When built as a module and running with update_ms >= 0, pstore will Oops during module unload since the work timer is still running. This makes sure the worker is stopped before unloading. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Ankit Kumar authored
commit 041939c1 upstream. After commit c950fd6f kernel registers pstore write based on flag set. Pstore write for powerpc is broken as flags(PSTORE_FLAGS_DMESG) is not set for powerpc architecture. On panic, kernel doesn't write message to /fs/pstore/dmesg*(Entry doesn't gets created at all). This patch enables pstore write for powerpc architecture by setting PSTORE_FLAGS_DMESG flag. Fixes: c950fd6f ("pstore: Split pstore fragile flags") Signed-off-by:
Ankit Kumar <ankit@linux.vnet.ibm.com> Signed-off-by:
-
Dan Williams authored
commit d5483fed upstream. Fix failures to create namespaces due to the vmem_altmap not advertising enough free space to store the memmap. WARNING: CPU: 15 PID: 8022 at arch/x86/mm/init_64.c:656 arch_add_memory+0xde/0xf0 [..] Call Trace: dump_stack+0x63/0x83 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 arch_add_memory+0xde/0xf0 devm_memremap_pages+0x244/0x440 pmem_attach_disk+0x37e/0x490 [nd_pmem] nd_pmem_probe+0x7e/0xa0 [nd_pmem] nvdimm_bus_probe+0x71/0x120 [libnvdimm] driver_probe_device+0x2bb/0x460 bind_store+0x114/0x160 drv_attr_store+0x25/0x30 In commit 658922e5 "libnvdimm, pfn: fix memmap reservation sizing" we arranged for the capacity to be allocated, but failed to also update the 'npfns' parameter. This leads to cases where there is enough capacity reserved to hold all the allocated sections, but vmemmap_populate_hugepages() still encounters -ENOMEM from altmap_alloc_block_buf(). This fix is a stop-gap until we can teach the core memory hotplug implementation to permit sub-section hotplug. Fixes: 658922e5 ("libnvdimm, pfn: fix memmap reservation sizing") Reported-by:
Anisha Allada <anisha.allada@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Toshi Kani authored
commit b2518c78 upstream. The following BUG was observed when nd_pmem_notify() was called for a BTT device. The use of a pmem_device pointer is not valid with BTT. BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: nd_pmem_notify+0x30/0xf0 [nd_pmem] Call Trace: nd_device_notify+0x40/0x50 child_notify+0x10/0x20 device_for_each_child+0x50/0x90 nd_region_notify+0x20/0x30 nd_device_notify+0x40/0x50 nvdimm_region_notify+0x27/0x30 acpi_nfit_scrub+0x341/0x590 [nfit] process_one_work+0x197/0x450 worker_thread+0x4e/0x4a0 kthread+0x109/0x140 Fix nd_pmem_notify() by setting nd_region and badblocks pointers properly for BTT. Cc: Vishal Verma <vishal.l.verma@intel.com> Fixes: 71999466 ("libnvdimm: async notification support") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
-
Dan Williams authored
commit bc042fdf upstream. In the case where a dimm does not have any associated flush hints the ndrd->flush_wpq array may be uninitialized leading to crashes with the following signature: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: region_visible+0x10f/0x160 [libnvdimm] Call Trace: internal_create_group+0xbe/0x2f0 sysfs_create_groups+0x40/0x80 device_add+0x2d8/0x650 nd_async_device_register+0x12/0x40 [libnvdimm] async_run_entry_fn+0x39/0x170 process_one_work+0x212/0x6c0 ? process_one_work+0x197/0x6c0 worker_thread+0x4e/0x4a0 kthread+0x10c/0x140 ? process_one_work+0x6c0/0x6c0 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x31/0x40 Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Fixes: f284a4f2 ("libnvdimm: introduce nvdimm_flush() and nvdimm_has_flush()") Signed-off-by:
-
Joeseph Chang authored
commit 6de65fcf upstream. msg_written_handler() may set ssif_info->multi_data to NULL when using ipmitool to write fru. Before setting ssif_info->multi_data to NULL, add new local pointer "data_to_send" and store correct i2c data pointer to it to fix NULL pointer kernel panic and incorrect ssif_info->multi_pos. Signed-off-by:
Joeseph Chang <joechang@codeaurora.org> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Johan Hovold authored
commit dcb9cfaa upstream. Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 74cdad37 ("Bluetooth: hci_intel: Add runtime PM support") Fixes: 1ab1f239 ("Bluetooth: hci_intel: Add support for platform driver") Cc: Loic Poulain <loic.poulain@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hovold authored
commit 95065a61 upstream. Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 0395ffc1 ("Bluetooth: hci_bcm: Add PM for BCM devices") Cc: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by:
-
Szymon Janc authored
commit ab89f0bd upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
Marko Kiiskila <marko@runtime.io> Signed-off-by:
-
Wang YanQing authored
commit 77dae613 upstream. While using emacs, cat or others' commands in konsole with recent kernels, I have met many times that CTRL-C freeze konsole. After konsole freeze I can't type anything, then I have to open a new one, it is very annoying. See bug report: https://bugs.kde.org/show_bug.cgi?id=175283 The platform in that bug report is Solaris, but now the pty in linux has the same problem or the same behavior as Solaris :) It has high possibility to trigger the problem follow steps below: Note: In my test, BigFile is a text file whose size is bigger than 1G 1:open konsole 1:cat BigFile 2:CTRL-C After some digging, I find out the reason is that commit 1d1d14da ("pty: Fix buffer flush deadlock") changes the behavior of pty_flush_buffer. Thread A Thread B -------- -------- 1:n_tty_poll return POLLIN 2:CTRL-C trigger pty_flush_buffer tty_buffer_flush n_tty_flush_buffer 3:attempt to check count of chars: ioctl(fd, TIOCINQ, &available) available is equal to 0 4:read(fd, buffer, avaiable) return 0 5:konsole close fd Yes, I know we could use the same patch included in the BUG report as a workaround for linux platform too. But I think the data in ldisc is belong to application of another side, we shouldn't clear it when we want to flush write buffer of this side in pty_flush_buffer. So I think it is better to disable ldisc flush in pty_flush_buffer, because its new hehavior bring no benefit except that it mess up the behavior between POLLIN, and TIOCINQ or FIONREAD. Also I find no flush_buffer function in others' tty driver has the same behavior as current pty_flush_buffer. Fixes: 1d1d14da ("pty: Fix buffer flush deadlock") Signed-off-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 77e6fe7f upstream. Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc262 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Johan Hovold authored
commit 099bd73d upstream. An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7d ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Marek Szyprowski authored
commit 768d64f4 upstream. Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4) [<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8) [<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Eric Biggers authored
commit 272f98f6 upstream. To mitigate some types of offline attacks, filesystem encryption is designed to enforce that all files in an encrypted directory tree use the same encryption policy (i.e. the same encryption context excluding the nonce). However, the fscrypt_has_permitted_context() function which enforces this relies on comparing struct fscrypt_info's, which are only available when we have the encryption keys. This can cause two incorrect behaviors: 1. If we have the parent directory's key but not the child's key, or vice versa, then fscrypt_has_permitted_context() returned false, causing applications to see EPERM or ENOKEY. This is incorrect if the encryption contexts are in fact consistent. Although we'd normally have either both keys or neither key in that case since the master_key_descriptors would be the same, this is not guaranteed because keys can be added or removed from keyrings at any time. 2. If we have neither the parent's key nor the child's key, then fscrypt_has_permitted_context() returned true, causing applications to see no error (or else an error for some other reason). This is incorrect if the encryption contexts are in fact inconsistent, since in that case we should deny access. To fix this, retrieve and compare the fscrypt_contexts if we are unable to set up both fscrypt_infos. While this slightly hurts performance when accessing an encrypted directory tree without the key, this isn't a case we really need to be optimizing for; access *with* the key is much more important. Furthermore, the performance hit is barely noticeable given that we are already retrieving the fscrypt_context and doing two keyring searches in fscrypt_get_encryption_info(). If we ever actually wanted to optimize this case we might start by caching the fscrypt_contexts. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Dan Williams authored
commit ed01e50a upstream. If device_add() fails, cleanup the cdev. Otherwise, we leak a kobj_map() with a stale device number. As Jason points out, there is a small possibility that userspace has opened and mapped the device in the time between cdev_add() and the device_add() failure. We need a new kill_dax_dev() helper to invalidate any established mappings. Fixes: ba09c01d ("dax: convert to the cdev api") Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Jason A. Donenfeld authored
commit 07a77929 upstream. The author meant to free the variable that was just allocated, instead of the one that failed to be allocated, but made a simple typo. This patch rectifies that. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Björn Jacke authored
commit 85435d7a upstream. SFM is mapping doublequote to 0xF020 Without this patch creating files with doublequote fails to Windows/Mac Signed-off-by:
Bjoern Jacke <bjacke@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
David Disseldorp authored
commit d8a6e505 upstream. An open directory may have a NULL private_data pointer prior to readdir. Fixes: 0de1f4c6 ("Add way to query server fs info for smb3") Signed-off-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Rabin Vincent authored
commit 3998e6b8 upstream. When the final cifsFileInfo_put() is called from cifsiod and an oplock break work is queued, lockdep complains loudly: ============================================= [ INFO: possible recursive locking detected ] 4.11.0+ #21 Not tainted --------------------------------------------- kworker/0:2/78 is trying to acquire lock: ("cifsiod"){++++.+}, at: flush_work+0x215/0x350 but task is already holding lock: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock("cifsiod"); lock("cifsiod"); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by kworker/0:2/78: #0: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 #1: ((&wdata->work)){+.+...}, at: process_one_work+0x255/0x8e0 stack backtrace: CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 4.11.0+ #21 Workqueue: cifsiod cifs_writev_complete Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x17dd/0x2260 ? match_held_lock+0x20/0x2b0 ? trace_hardirqs_off_caller+0x86/0x130 ? mark_lock+0xa6/0x920 lock_acquire+0xcc/0x260 ? lock_acquire+0xcc/0x260 ? flush_work+0x215/0x350 flush_work+0x236/0x350 ? flush_work+0x215/0x350 ? destroy_worker+0x170/0x170 __cancel_work_timer+0x17d/0x210 ? ___preempt_schedule+0x16/0x18 cancel_work_sync+0x10/0x20 cifsFileInfo_put+0x338/0x7f0 cifs_writedata_release+0x2a/0x40 ? cifs_writedata_release+0x2a/0x40 cifs_writev_complete+0x29d/0x850 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 This is a real warning. Since the oplock is queued on the same workqueue this can deadlock if there is only one worker thread active for the workqueue (which will be the case during memory pressure when the rescuer thread is handling it). Furthermore, there is at least one other kind of hang possible due to the oplock break handling if there is only worker. (This can be reproduced without introducing memory pressure by having passing 1 for the max_active parameter of cifsiod.) cifs_oplock_break() can wait indefintely in the filemap_fdatawait() while the cifs_writev_complete() work is blocked: sysrq: SysRq : Show Blocked State task PC stack pid father kworker/0:1 D 0 16 2 0x00000000 Workqueue: cifsiod cifs_oplock_break Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x4a/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 cifs_oplock_break+0x651/0x710 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 dd D 0 683 171 0x00000000 Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x29/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 filemap_write_and_wait+0x4e/0x70 cifs_flush+0x6a/0xb0 filp_close+0x52/0xa0 __close_fd+0xdc/0x150 SyS_close+0x33/0x60 entry_SYSCALL_64_fastpath+0x1f/0xbe Showing all locks held in the system: 2 locks held by kworker/0:1/16: #0: ("cifsiod"){.+.+.+}, at: process_one_work+0x255/0x8e0 #1: ((&cfile->oplock_break)){+.+.+.}, at: process_one_work+0x255/0x8e0 Showing busy workqueues and worker pools: workqueue cifsiod: flags=0xc pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1 in-flight: 16:cifs_oplock_break delayed: cifs_writev_complete, cifs_echo_request pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 750 3 Fix these problems by creating a a new workqueue (with a rescuer) for the oplock break work. Signed-off-by:
Rabin Vincent <rabinv@axis.com> Signed-off-by:
-
David Disseldorp authored
commit 6026685d upstream. As with 61876395, an open directory may have a NULL private_data pointer prior to readdir. CIFS_ENUMERATE_SNAPSHOTS must check for this before dereference. Fixes: 834170c8 ("Enable previous version support") Signed-off-by:
-
David Disseldorp authored
commit 0e5c7955 upstream. The server may respond with success, and an output buffer less than sizeof(struct smb_snapshot_array) in length. Do not leak the output buffer in this case. Fixes: 834170c8 ("Enable previous version support") Signed-off-by:
-
Björn Jacke authored
commit b704e70b upstream. - trailing space maps to 0xF028 - trailing period maps to 0xF029 This fix corrects the mapping of file names which have a trailing character that would otherwise be illegal (period or space) but is allowed by POSIX. Signed-off-by:
-
Steve French authored
commit 7db0a6ef upstream. Macs send the maximum buffer size in response on ioctl to validate negotiate security information, which causes us to fail the mount as the response buffer is larger than the expected response. Changed ioctl response processing to allow for padding of validate negotiate ioctl response and limit the maximum response size to maximum buffer size. Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Steve French authored
commit 26c9cb66 upstream. Mac requires the unicode flag to be set for cifs, even for the smb echo request (which doesn't have strings). Without this Mac rejects the periodic echo requests (when mounting with cifs) that we use to check if server is down Signed-off-by:
-
Sachin Prabhu authored
commit cd8c4296 upstream. Incorrect return value for shares not using the prefix path means that we will never match superblocks for these shares. Fixes: commit c1d8b24d ("Compare prepaths when comparing superblocks") Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Vlastimil Babka authored
commit 62be1511 upstream. Patch series "more robust PF_MEMALLOC handling" This series aims to unify the setting and clearing of PF_MEMALLOC, which prevents recursive reclaim. There are some places that clear the flag unconditionally from current->flags, which may result in clearing a pre-existing flag. This already resulted in a bug report that Patch 1 fixes (without the new helpers, to make backporting easier). Patch 2 introduces the new helpers, modelled after existing memalloc_noio_* and memalloc_nofs_* helpers, and converts mm core to use them. Patches 3 and 4 convert non-mm code. This patch (of 4): __alloc_pages_direct_compact() sets PF_MEMALLOC to prevent deadlock during page migration by lock_page() (see the comment in __unmap_and_move()). Then it unconditionally clears the flag, which can clear a pre-existing PF_MEMALLOC flag and result in recursive reclaim. This was not a problem until commit a8161d1e ("mm, page_alloc: restructure direct compaction handling in slowpath"), because direct compation was called only after direct reclaim, which was skipped when PF_MEMALLOC flag was set. Even now it's only a theoretical issue, as the new callsite of __alloc_pages_direct_compact() is reached only for costly orders and when gfp_pfmemalloc_allowed() is true, which means either __GFP_NOMEMALLOC is in gfp_flags or in_interrupt() is true. There is no such known context, but let's play it safe and make __alloc_pages_direct_compact() robust for cases where PF_MEMALLOC is already set. Fixes: a8161d1e ("mm, page_alloc: restructure direct compaction handling in slowpath") Link: http://lkml.kernel.org/r/20170405074700.29871-2-vbabka@suse.czSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chris Leech <cleech@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andrey Ryabinin authored
commit a5f6a6a9 upstream. invalidate_bdev() calls cleancache_invalidate_inode() iff ->nrpages != 0 which doen't make any sense. Make sure that invalidate_bdev() always calls cleancache_invalidate_inode() regardless of mapping->nrpages value. Fixes: c515e1fd ("mm/fs: add hooks to support cleancache") Link: http://lkml.kernel.org/r/20170424164135.22350-3-aryabinin@virtuozzo.comSigned-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Kuznetsov <kuznet@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by:
-
