- 20 Sep, 2022 40 commits
-
-
Alex Elder authored
All field mask symbols are defined with a "_FMASK" suffix, but EOT_COAL_GRANULARITY and DRBIP_ACL_ENABLE are defined without one. Fix that. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alex Elder authored
Starting with IPA v4.5, replication is done differently from before, and as a result the "replication" portion of the how the sequencer is specified must be zero. Add a check for the configuration data failing that requirement, and only update the sesquencer type value when it's supported. Signed-off-by:
-
Alex Elder authored
In ipa_endpoint_init_hdr(), as well as ipa_endpoint_init_hdr_ext(), a top-level automatic variable named "offset" is used to represent the offset of a register. However, deeper within each of those functions is *another* definition of a local variable with the same name, representing something else. Scoping rules ensure the result is what was intended, but this variable name reuse is bad practice and makes the code confusing. Fix this by naming the inner variable "off". Use "off" instead of "checksum_offset" in ipa_endpoint_init_cfg() for consistency. Signed-off-by:
-
Alex Elder authored
Move the definition of ipa_version_valid(), making it a static inline function defined together with the enumerated type in "ipa_version.h". Define a new count value in the type. Rename the function to be ipa_version_supported(), and have it return true only if the IPA version supplied is explicitly supported by the driver. Signed-off-by:
-
Alex Elder authored
Move the definition of the gsi_ee_id enumerated type out of "gsi.h" and into "ipa_version.h". That latter header file isolates the definition of the ipa_version enumerated type, allowing it to be included in both IPA and GSI code. We have the same requirement for gsi_ee_id, and moving it here makes it easier to get only that definition without everything else defined in "gsi.h". Signed-off-by:
-
Alex Elder authored
Each GSI execution environment (EE) is able to access many of the GSI registers associated with the other EEs. A block of GSI registers is contained within a region of memory, and an EE's register offset can be determined by adding the register's base offset to the product of the EE ID and a fixed constant. Despite this possibility, the AP IPA code *never* accesses any GSI registers other than its own. So there's no need to define the macros that compute register offsets for other EEs. Redefine the AP access macros to compute the offset the way the more general "any EE" macro would, and get rid of the unneeded macros. Signed-off-by:
-
Paolo Abeni authored
Alexandru Tachici says: ==================== net: ethernet: adi: Add ADIN1110 support The ADIN1110 is a low power single port 10BASE-T1L MAC-PHY designed for industrial Ethernet applications. It integrates an Ethernet PHY core with a MAC and all the associated analog circuitry, input and output clock buffering. ADIN1110 MAC-PHY encapsulates the ADIN1100 PHY. The PHY registers can be accessed through the MDIO MAC registers. We are registering an MDIO bus with custom read/write in order to let the PHY to be discovered by the PAL. This will let the ADIN1100 Linux driver to probe and take control of the PHY. The ADIN2111 is a low power, low complexity, two-Ethernet ports switch with integrated 10BASE-T1L PHYs and one serial peripheral interface (SPI) port. The device is designed for industrial Ethernet applications using low power constrained nodes and is compliant with the IEEE 802.3cg-2019 Ethernet standard for long reach 10 Mbps single pair Ethernet (SPE). The switch supports various routing configurations between the two Ethernet ports and the SPI host port providing a flexible solution for line, daisy-chain, or ring network topologies. The ADIN2111 supports cable reach of up to 1700 meters with ultra low power consumption of 77 mW. The two PHY cores support the 1.0 V p-p operating mode and the 2.4 V p-p operating mode defined in the IEEE 802.3cg standard. The device integrates the switch, two Ethernet physical layer (PHY) cores with a media access control (MAC) interface and all the associated analog circuitry, and input and output clock buffering. The device also includes internal buffer queues, the SPI and subsystem registers, as well as the control logic to manage the reset and clock control and hardware pin configuration. Access to the PHYs is exposed via an internal MDIO bus. Writes/reads can be performed by reading/writing to the ADIN2111 MDIO registers via SPI. On probe, for each port, a struct net_device is allocated and registered. When both ports are added to the same bridge, the driver will enable offloading of frame forwarding at the hardware level. Driver offers STP support. Normal operation on forwarding state. Allows only frames with the 802.1d DA to be passed to the host when in any of the other states. When both ports of ADIN2111 belong to the same SW bridge a maximum of 12 FDB entries will offloaded by the hardware and are marked as such. ==================== Link: https://lore.kernel.org/r/20220913122629.124546-1-andrei.tachici@stud.acs.upb.roSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Alexandru Tachici authored
Add bindings for the ADIN1110/2111 MAC-PHY/SWITCH. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by:
-
Alexandru Tachici authored
The ADIN1110 is a low power single port 10BASE-T1L MAC-PHY designed for industrial Ethernet applications. It integrates an Ethernet PHY core with a MAC and all the associated analog circuitry, input and output clock buffering. ADIN1110 MAC-PHY encapsulates the ADIN1100 PHY. The PHY registers can be accessed through the MDIO MAC registers. We are registering an MDIO bus with custom read/write in order to let the PHY to be discovered by the PAL. This will let the ADIN1100 Linux driver to probe and take control of the PHY. The ADIN2111 is a low power, low complexity, two-Ethernet ports switch with integrated 10BASE-T1L PHYs and one serial peripheral interface (SPI) port. The device is designed for industrial Ethernet applications using low power constrained nodes and is compliant with the IEEE 802.3cg-2019 Ethernet standard for long reach 10 Mbps single pair Ethernet (SPE). The switch supports various routing configurations between the two Ethernet ports and the SPI host port providing a flexible solution for line, daisy-chain, or ring network topologies. The ADIN2111 supports cable reach of up to 1700 meters with ultra low power consumption of 77 mW. The two PHY cores support the 1.0 V p-p operating mode and the 2.4 V p-p operating mode defined in the IEEE 802.3cg standard. The device integrates the switch, two Ethernet physical layer (PHY) cores with a media access control (MAC) interface and all the associated analog circuitry, and input and output clock buffering. The device also includes internal buffer queues, the SPI and subsystem registers, as well as the control logic to manage the reset and clock control and hardware pin configuration. Access to the PHYs is exposed via an internal MDIO bus. Writes/reads can be performed by reading/writing to the ADIN2111 MDIO registers via SPI. On probe, for each port, a struct net_device is allocated and registered. When both ports are added to the same bridge, the driver will enable offloading of frame forwarding at the hardware level. Driver offers STP support. Normal operation on forwarding state. Allows only frames with the 802.1d DA to be passed to the host when in any of the other states. When both ports of ADIN2111 belong to the same SW bridge a maximum of 12 FDB entries will offloaded by the hardware and are marked as such. Co-developed-by:
Lennart Franzen <lennart@lfdomain.com> Signed-off-by:
-
Alexandru Tachici authored
Add additional PHY IDs for the internal PHYs of adin1110 and adin2111. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Paolo Abeni authored
Andrea Mayer says: ==================== seg6: add NEXT-C-SID support for SRv6 End behavior The Segment Routing (SR) architecture is based on loose source routing. A list of instructions, called segments, can be added to the packet headers to influence the forwarding and processing of the packets in an SR enabled network. In SRv6 (Segment Routing over IPv6 data plane) [1], the segment identifiers (SIDs) are IPv6 addresses (128 bits) and the segment list (SID List) is carried in the Segment Routing Header (SRH). A segment may correspond to a "behavior" that is executed by a node when the packet is received. The Linux kernel currently supports a large subset of the behaviors described in [2] (e.g., End, End.X, End.T and so on). Some SRv6 scenarios (i.e.: traffic-engineering, fast-rerouting, VPN, mobile network backhaul, etc.) may require a large number of segments (i.e. up to 15). Therefore, reducing the size of the SID List is useful to minimize the impact on MTU (Maximum Transfer Unit) and to enable SRv6 on legacy hardware devices with limited processing power that can suffer from long IPv6 headers. Draft-ietf-spring-srv6-srh-compression [3] extends the SRv6 architecture by providing different mechanisms for the efficient representation (i.e. compression) of the SID List. The NEXT-C-SID mechanism described in [3] offers the possibility of encoding several SRv6 segments within a single 128 bit SID address. Such a SID address is called a Compressed SID Container. In this way, the length of the SID List can be drastically reduced. In some cases, the SRH can be omitted, as the IPv6 Destination Address can carry the whole Segment List, using its compressed representation. The NEXT-C-SID mechanism relies on the "flavors" framework defined in [2]. The flavors represent additional operations that can modify or extend a subset of the existing behaviors. In this patchset we extend the SRv6 Subsystem in order to support the NEXT-C-SID mechanism. In details the patchset is made of: - patch 1/3: add netlink_ext_ack support in parsing SRv6 behavior attributes; - patch 2/3: add NEXT-C-SID support for SRv6 End behavior; - patch 3/3: add selftest for NEXT-C-SID in SRv6 End behavior. The corresponding iproute2 patch for supporting the NEXT-C-SID in SRv6 End behavior is provided in a separated patchset. Comments, improvements and suggestions are always appreciated. [1] - https://datatracker.ietf.org/doc/html/rfc8754 [2] - https://datatracker.ietf.org/doc/html/rfc8986 [3] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression ==================== Link: https://lore.kernel.org/r/20220912171619.16943-1-andrea.mayer@uniroma2.itSigned-off-by:
-
Andrea Mayer authored
This selftest is designed for testing the support of NEXT-C-SID flavor for SRv6 End behavior. It instantiates a virtual network composed of several nodes: hosts and SRv6 routers. Each node is realized using a network namespace that is properly interconnected to others through veth pairs. The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged by hosts for communicating with each other. Such routers i) apply different SRv6 Policies to the traffic received from connected hosts, considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID compression mechanism for encoding several SRv6 segments within a single 128-bit SID address, referred to as a Compressed SID (C-SID) container. The NEXT-C-SID is provided as a "flavor" of the SRv6 End behavior, enabling it to properly process the C-SID containers. The correct execution of the enabled NEXT-C-SID SRv6 End behavior is verified through reachability tests carried out between hosts belonging to the same VPN. Signed-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Acked-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Andrea Mayer authored
The NEXT-C-SID mechanism described in [1] offers the possibility of encoding several SRv6 segments within a single 128 bit SID address. Such a SID address is called a Compressed SID (C-SID) container. In this way, the length of the SID List can be drastically reduced. A SID instantiated with the NEXT-C-SID flavor considers an IPv6 address logically structured in three main blocks: i) Locator-Block; ii) Locator-Node Function; iii) Argument. C-SID container +------------------------------------------------------------------+ | Locator-Block |Loc-Node| Argument | | |Function| | +------------------------------------------------------------------+ <--------- B -----------> <- NF -> <------------- A ---------------> (i) The Locator-Block can be any IPv6 prefix available to the provider; (ii) The Locator-Node Function represents the node and the function to be triggered when a packet is received on the node; (iii) The Argument carries the remaining C-SIDs in the current C-SID container. The NEXT-C-SID mechanism relies on the "flavors" framework defined in [2]. The flavors represent additional operations that can modify or extend a subset of the existing behaviors. This patch introduces the support for flavors in SRv6 End behavior implementing the NEXT-C-SID one. An SRv6 End behavior with NEXT-C-SID flavor works as an End behavior but it is capable of processing the compressed SID List encoded in C-SID containers. An SRv6 End behavior with NEXT-C-SID flavor can be configured to support user-provided Locator-Block and Locator-Node Function lengths. In this implementation, such lengths must be evenly divisible by 8 (i.e. must be byte-aligned), otherwise the kernel informs the user about invalid values with a meaningful error code and message through netlink_ext_ack. If Locator-Block and/or Locator-Node Function lengths are not provided by the user during configuration of an SRv6 End behavior instance with NEXT-C-SID flavor, the kernel will choose their default values i.e., 32-bit Locator-Block and 16-bit Locator-Node Function. [1] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression [2] - https://datatracker.ietf.org/doc/html/rfc8986Signed-off-by: -
Andrea Mayer authored
An SRv6 behavior instance can be set up using mandatory and/or optional attributes. In the setup phase, each supplied attribute is parsed and processed. If the parsing operation fails, the creation of the behavior instance stops and an error number/code is reported to the user. In many cases, it is challenging for the user to figure out exactly what happened by relying only on the error code. For this reason, we add the support for netlink_ext_ack in parsing SRv6 behavior attributes. In this way, when an SRv6 behavior attribute is parsed and an error occurs, the kernel can send a message to the userspace describing the error through a meaningful text message in addition to the classic error code. Signed-off-by:
-
Richard Gobert authored
In the cited commit, the function ipv6_gro_receive was accidentally changed to use skb_gro_header_slow, without attempting the fast path. Fix it. Fixes: 35ffb665 ("net: gro: skb_gro_header helper function") Signed-off-by:
Richard Gobert <richardbgobert@gmail.com> Link: https://lore.kernel.org/r/20220911184835.GA105063@debianSigned-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:539:6: error: variable 'macsec_rule' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (err) ^~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:598:9: note: uninitialized use occurs here return macsec_rule; ^~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:539:2: note: remove the 'if' if its condition is always false if (err) ^~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:523:38: note: initialize the variable 'macsec_rule' to silence this warning union mlx5e_macsec_rule *macsec_rule; ^ = NULL drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1131:6: error: variable 'macsec_rule' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (err) ^~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1215:9: note: uninitialized use occurs here return macsec_rule; ^~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1131:2: note: remove the 'if' if its condition is always false if (err) ^~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1118:38: note: initialize the variable 'macsec_rule' to silence this warning union mlx5e_macsec_rule *macsec_rule; ^ = NULL 2 errors generated. If macsec_fs_{r,t}x_ft_get() fail, macsec_rule will be uninitialized. Initialize it to NULL at the top of each function so that it cannot be used uninitialized. Fixes: e467b283 ("net/mlx5e: Add MACsec TX steering rules") Fixes: 3b20949c ("net/mlx5e: Add MACsec RX steering rules") Link: https://github.com/ClangBuiltLinux/linux/issues/1706Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/20220911085748.461033-1-nathan@kernel.orgSigned-off-by:
-
Paolo Abeni authored
Vladimir Oltean says: ==================== DSA changes for multiple CPU ports (part 4) Those who have been following part 1: https://patchwork.kernel.org/project/netdevbpf/cover/20220511095020.562461-1-vladimir.oltean@nxp.com/ part 2: https://patchwork.kernel.org/project/netdevbpf/cover/20220521213743.2735445-1-vladimir.oltean@nxp.com/ and part 3: https://patchwork.kernel.org/project/netdevbpf/cover/20220819174820.3585002-1-vladimir.oltean@nxp.com/ will know that I am trying to enable the second internal port pair from the NXP LS1028A Felix switch for DSA-tagged traffic via "ocelot-8021q". This series represents the final part of that effort. We have: - the introduction of new UAPI in the form of IFLA_DSA_MASTER, the iproute2 patch for which is here: https://patchwork.kernel.org/project/netdevbpf/patch/20220904190025.813574-1-vladimir.oltean@nxp.com/ - preparation for LAG DSA masters in terms of suppressing some operations for masters in the DSA core that simply don't make sense when those masters are a bonding/team interface - handling all the net device events that occur between DSA and a LAG DSA master, including migration to a different DSA master when the current master joins a LAG, or the LAG gets destroyed - updating documentation - adding an implementation for NXP LS1028A, where things are insanely complicated due to hardware limitations. We have 2 tagging protocols: * the native "ocelot" protocol (NPI port mode). This does not support CPU ports in a LAG, and supports a single DSA master. The DSA master can be changed between eno2 (2.5G) and eno3 (1G), but all ports must be down during the changing process, and user ports assigned to the old DSA master will refuse to come up if the user requests that during a "transient" state. * the "ocelot-8021q" software-defined protocol, where the Ethernet ports connected to the CPU are not actually "god mode" ports as far as the hardware is concerned. So here, static assignment between user and CPU ports is possible by editing the PGID_SRC masks for the port-based forwarding matrix, and "CPU ports in a LAG" simply means "a LAG like any other". The series was regression-tested on LS1028A using the local_termination.sh kselftest, in most of the possible operating modes and tagging protocols. I have not done a detailed performance evaluation yet, but using LAG, is possible to exceed the termination bandwidth of a single CPU port in an iperf3 test with multiple senders and multiple receivers. v1 at: https://patchwork.kernel.org/project/netdevbpf/cover/20220830195932.683432-1-vladimir.oltean@nxp.com/ Previous (older) RFC at: https://lore.kernel.org/netdev/20220523104256.3556016-1-olteanv@gmail.com/ ==================== Link: https://lore.kernel.org/r/20220911010706.2137967-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Changing the DSA master means different things depending on the tagging protocol in use. For NPI mode ("ocelot" and "seville"), there is a single port which can be configured as NPI, but DSA only permits changing the CPU port affinity of user ports one by one. So changing a user port to a different NPI port globally changes what the NPI port is, and breaks the user ports still using the old one. To address this while still permitting the change of the NPI port, require that the user ports which are still affine to the old NPI port are down, and cannot be brought up until they are all affine to the same NPI port. The tag_8021q mode ("ocelot-8021q") is more flexible, in that each user port can be freely assigned to one CPU port or to the other. This works by filtering host addresses towards both tag_8021q CPU ports, and then restricting the forwarding from a certain user port only to one of the two tag_8021q CPU ports. Additionally, the 2 tag_8021q CPU ports can be placed in a LAG. This works by enabling forwarding via PGID_SRC from a certain user port towards the logical port ID containing both tag_8021q CPU ports, but then restricting forwarding per packet, via the LAG hash codes in PGID_AGGR, to either one or the other. When we change the DSA master to a LAG device, DSA guarantees us that the LAG has at least one lower interface as a physical DSA master. But DSA masters can come and go as lowers of that LAG, and ds->ops->port_change_master() will not get called, because the DSA master is still the same (the LAG). So we need to hook into the ds->ops->port_lag_{join,leave} calls on the CPU ports and update the logical port ID of the LAG that user ports are assigned to. Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
DSA now supports multiple CPU ports, explain the use cases that are covered, the new UAPI, the permitted degrees of freedom, the driver API, and remove some old "hanging fruits". Signed-off-by:
-
Vladimir Oltean authored
There are 2 ways in which a DSA user port may become handled by 2 CPU ports in a LAG: (1) its current DSA master joins a LAG ip link del bond0 && ip link add bond0 type bond mode 802.3ad ip link set eno2 master bond0 When this happens, all user ports with "eno2" as DSA master get automatically migrated to "bond0" as DSA master. (2) it is explicitly configured as such by the user # Before, the DSA master was eno3 ip link set swp0 type dsa master bond0 The design of this configuration is that the LAG device dynamically becomes a DSA master through dsa_master_setup() when the first physical DSA master becomes a LAG slave, and stops being so through dsa_master_teardown() when the last physical DSA master leaves. A LAG interface is considered as a valid DSA master only if it contains existing DSA masters, and no other lower interfaces. Therefore, we mainly rely on method (1) to enter this configuration. Each physical DSA master (LAG slave) retains its dev->dsa_ptr for when it becomes a standalone DSA master again. But the LAG master also has a dev->dsa_ptr, and this is actually duplicated from one of the physical LAG slaves, and therefore needs to be balanced when LAG slaves come and go. To the switch driver, putting DSA masters in a LAG is seen as putting their associated CPU ports in a LAG. We need to prepare cross-chip host FDB notifiers for CPU ports in a LAG, by calling the driver's ->lag_fdb_add method rather than ->port_fdb_add. Signed-off-by:
-
Vladimir Oltean authored
Drivers could refuse to offload a LAG configuration for a variety of reasons, mainly having to do with its TX type. Additionally, since DSA masters may now also be LAG interfaces, and this will translate into a call to port_lag_join on the CPU ports, there may be extra restrictions there. Propagate the netlink extack to this DSA method in order for drivers to give a meaningful error message back to the user. Signed-off-by:
-
Vladimir Oltean authored
These don't work (print a harmless error about the operation failing) and make little sense to have anyway, because when a LAG DSA master goes away, we will introduce logic to move our CPU port back to the first physical DSA master. So suppress these device links in preparation for adding support for LAG DSA masters. Signed-off-by:
-
Vladimir Oltean authored
Similar to the discussion about tracking the admin/oper state of LAG DSA masters, we have the problem here that struct dsa_port *cpu_dp caches a single pair of orig_ethtool_ops and netdev_ops pointers. So if we call dsa_master_setup(bond0, cpu_dp) where cpu_dp is also the dev->dsa_ptr of one of the physical DSA masters, we'd effectively overwrite what we cached from that physical netdev with what replaced from the bonding interface. We don't need DSA ethtool stats on the bonding interface when used as DSA master, it's good enough to have them just on the physical DSA masters, so suppress this logic. Signed-off-by:
-
Vladimir Oltean authored
We store information about the DSA master's state in cpu_dp->master_admin_up and cpu_dp->master_oper_up, and this assumes a bijective association between a CPU port and a DSA master. However, when we have CPU ports in a LAG (and DSA masters in a LAG too), the way in which we set up things is that the physical DSA masters still have dev->dsa_ptr pointing to our cpu_dp, but the bonding/team device itself also has its dev->dsa_ptr pointing towards one of the CPU port structures (the first one). So logically speaking, that first cpu_dp can't keep track of both the physical master's admin/oper state, and of the bonding master's state. This isn't even needed; the reason why we keep track of the DSA master's state is to know when it is available for Ethernet-based register access. For that use case, we don't even need LAG; we just need to decide upon one of the physical DSA masters (if there is more than 1 available) and use that. This change suppresses dsa_tree_master_{admin,oper}_state_change() calls on LAG DSA masters (which will be supported in a future change), to allow the tracking of just physical DSA masters. Link: https://lore.kernel.org/netdev/628cc94d.1c69fb81.15b0d.422d@mx.google.com/Suggested-by:Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Some DSA switches have multiple CPU ports, which can be used to improve CPU termination throughput, but DSA, through dsa_tree_setup_cpu_ports(), sets up only the first one, leading to suboptimal use of hardware. The desire is to not change the default configuration but to permit the user to create a dynamic mapping between individual user ports and the CPU port that they are served by, configurable through rtnetlink. It is also intended to permit load balancing between CPU ports, and in that case, the foreseen model is for the DSA master to be a bonding interface whose lowers are the physical DSA masters. To that end, we create a struct rtnl_link_ops for DSA user ports with the "dsa" kind. We expose the IFLA_DSA_MASTER link attribute that contains the ifindex of the newly desired DSA master. Signed-off-by:
-
Vladimir Oltean authored
There is a desire to support for DSA masters in a LAG. That configuration is intended to work by simply enslaving the master to a bonding/team device. But the physical DSA master (the LAG slave) still has a dev->dsa_ptr, and that cpu_dp still corresponds to the physical CPU port. However, we would like to be able to retrieve the LAG that's the upper of the physical DSA master. In preparation for that, introduce a helper called dsa_port_get_master() that replaces all occurrences of the dp->cpu_dp->master pattern. The distinction between LAG and non-LAG will be made later within the helper itself. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Some network drivers use __dev_mc_sync()/__dev_uc_sync() and therefore program the hardware only with addresses with a non-zero sync_cnt. Some of the above drivers also need to save/restore the address filtering lists when certain events happen, and they need to walk through the struct net_device :: uc and struct net_device :: mc lists. But these lists contain unsynced addresses too. To keep the appearance of an elementary form of data encapsulation, provide iterators through these lists that only look at entries with a non-zero sync_cnt, instead of filtering entries out from device drivers. Signed-off-by:
-
Paolo Abeni authored
Tony Nguyen says: ==================== ice: L2TPv3 offload support Wojciech Drewek says: Add support for dissecting L2TPv3 session id in flow dissector. Add support for this field in tc-flower and support offloading L2TPv3. Finally, add support for hardware offload of L2TPv3 packets based on session id in switchdev mode in ice driver. Example filter: # tc filter add dev $PF1 ingress prio 1 protocol ip \ flower \ ip_proto l2tp \ l2tpv3_sid 1234 \ skip_sw \ action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to use the new fields. ICE COMMS DDP package is required to create a filter in ice. COMMS DDP package contains profiles of more advanced protocols. Without COMMS DDP package hw offload will not work, however sw offload will still work. ==================== Link: https://lore.kernel.org/r/20220908171644.1282191-1-anthony.l.nguyen@intel.comSigned-off-by: -
Marcin Szycik authored
Add support for offloading packets based on L2TPv3 session id in switchdev mode. Example filter: tc filter add dev $PF1 ingress prio 1 protocol ip flower ip_proto l2tp \ l2tpv3_sid 1234 skip_sw action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to be able to specify l2tpv3_sid. ICE COMMS DDP package is required to create a filter as it contains L2TPv3 profiles. Reviewed-by:Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Wojciech Drewek authored
Allow to offload L2TPv3 filters by adding flow_rule_match_l2tpv3. Drivers can extract L2TPv3 specific fields from now on. Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
-
Wojciech Drewek authored
Add support for matching on L2TPv3 session ID. Session ID can be specified only when ip proto was set to IPPROTO_L2TP. Example filter: # tc filter add dev $PF1 ingress prio 1 protocol ip \ flower \ ip_proto l2tp \ l2tpv3_sid 1234 \ skip_sw \ action mirred egress redirect dev $VF1_PR Acked-by:Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Wojciech Drewek authored
Allow to dissect L2TPv3 specific field which is: - session ID (32 bits) L2TPv3 might be transported over IP or over UDP, this implementation is only about L2TPv3 over IP. IP protocol carries L2TPv3 when ip_proto is IPPROTO_L2TP (115). Acked-by:
-
Wojciech Drewek authored
IPPROTO_L2TP is currently defined in l2tp.h, but most of ip protocols are defined in in.h file. Move it there in order to keep code clean. Acked-by:
-
Jules Irenge authored
coccinelle reports a warning WARNING: casting value returned by memory allocation function to (struct octep_rx_buffer *) is useless. To fix this the useless cast is removed. Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/Yx+sr9o0uylXVcOl@playgroundSigned-off-by:
-
Nathan Huckleberry authored
All usages of the vport_ops struct have the .send field set to dev_queue_xmit or internal_dev_recv. Since most usages are set to dev_queue_xmit, the function hook should match the signature of dev_queue_xmit. The only call to vport_ops->send() is in net/openvswitch/vport.c and it throws away the return value. This mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. Reported-by:
Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Reviewed-by:
Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220913230739.228313-1-nhuck@google.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of t7xx_ccmni_start_xmit should be changed from int to netdev_tx_t. Reported-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://lore.kernel.org/r/20220912214510.929070-1-nhuck@google.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of ipc_wwan_link_transmit should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of korina_send_packet should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of liteeth_start_xmit should be changed from int to netdev_tx_t. Reported-by:
Gabriel Somlo <gsomlo@gmail.com> Link: https://lore.kernel.org/r/20220912195307.812229-1-nhuck@google.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of emac_dev_xmit should be changed from int to netdev_tx_t. Reported-by:
-
