- 30 Oct, 2019 3 commits
-
-
Alexander Duyck authored
Since we no longer check for __E1000_DOWN in e1000e_close we can drop the spot where we were restoring the bit. This saves us a bit of unnecessary complexity. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This patch is meant to address possible race conditions that can exist between network configuration and power management. A similar issue was fixed for igb in commit 9474933c ("igb: close/suspend race in netif_device_detach"). In addition it consolidates the code so that the PCI error handling code will essentially perform the power management freeze on the device prior to attempting a reset, and will thaw the device afterwards if that is what it is planning to do. Otherwise when we call close on the interface it should see it is detached and not attempt to call the logic to down the interface and free the IRQs again. From what I can tell the check that was adding the check for __E1000_DOWN in e1000e_close was added when runtime power management was added. However it should not be relevant for us as we perform a call to pm_runtime_get_sync before we call e1000_down/free_irq so it should always be back up before we call into this anyway. Reported-by: Morumuri Srivalli <smorumu1@in.ibm.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: David Dai <zdai@linux.vnet.ibm.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
-
Sasha Neftin authored
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Comet Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 29 Oct, 2019 11 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/pensando/ionic/ionic_txrx.c: In function 'ionic_rx_empty': drivers/net/ethernet/pensando/ionic/ionic_txrx.c:405:28: warning: variable 'sg_desc' set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Haemmerle authored
This adds WoL support on TI DP83867 for magic, magic secure, unicast and broadcast. Signed-off-by: Thomas Haemmerle <thomas.haemmerle@wolfvision.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
Fix currenty ignored returned error by properly checking *err* after calling aq_nic->aq_hw_ops->hw_ring_hwts_rx_fill(). Addresses-Coverity-ID: 1487357 ("Unused value") Fixes: 04a18399 ("net: aquantia: implement data PTP datapath") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mao Wenan authored
When NET_DSA_SMSC_LAN9303=y and NET_DSA_SMSC_LAN9303_MDIO=y, below errors can be seen: drivers/net/dsa/lan9303_mdio.c:87:23: error: REGMAP_ENDIAN_LITTLE undeclared here (not in a function) .reg_format_endian = REGMAP_ENDIAN_LITTLE, drivers/net/dsa/lan9303_mdio.c:93:3: error: const struct regmap_config has no member named reg_read .reg_read = lan9303_mdio_read, It should select REGMAP in config NET_DSA_SMSC_LAN9303. Fixes: dc700583 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mao Wenan authored
When using ARCH=mips CROSS_COMPILE=mips-linux-gnu- to build drivers/net/ethernet/aquantia/atlantic/aq_ptp.o and drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.o, below errors can be seen: drivers/net/ethernet/aquantia/atlantic/aq_ptp.c:1378:6: warning: symbol 'aq_ptp_poll_sync_work_cb' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c:1155:5: warning: symbol 'hw_atl_b0_ts_to_sys_clock' was not declared. Should it be static? This patch to make aq_ptp_poll_sync_work_cb and hw_atl_b0_ts_to_sys_clock be static to fix these warnings. Fixes: 9c477032 ("net: aquantia: add support for PIN funcs") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2019-10-25 This series contains updates to i40e only. Several are fixes that could go to 'net', but were intended for 'net-next'. Sylwia changes how the driver function to read the NVM module data, so that it is able to read the LLDP agent configuration to allow for persistent LLDP. Jaroslaw resolves an issue where the incorrect FEC settings were being displayed in ethtool, by setting the proper FEC bits. Piotr moves the hardware flags detection into a separate function, so that the specific flags can be set based on the MAC and NVM. Also extends the PHY access function to include a command flag to let the firmware know it should not change the page while accessing a OSFP module. Updates the driver to display the driver and firmware version when in recovery mode. Aleksandr refactored the VF MAC filters accounting since an untrusted VF was able to delete but not add a MAC filter, so refactor the code to have more consistency and improved logging. Nicholas updates the driver to use a default interval of 50 usecs, instead of the current 100 usecs which was causing some regression performance issues. Damian resolved LED blinking issues for X710T*L devices by adding specific flows for these devices in the LED operations. Navid Emamdoost found where allocated memory is not being properly freed upon a failure in setting up MAC VLANs, so added the missing kfree(). v2: Dropped patches 2 & 6 from the original series while we wait for the author to respond to community feedback. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The pointer bdp is being assigned with a value that is never read, so the assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Return directly from within the loop as soon as the port is found, otherwise we won't return NULL if the end of the list is reached. Fixes: b96ddf25 ("net: dsa: use ports list in dsa_to_port") Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Shifting the integer value 1 is evaluated using 32-bit arithmetic and then used in an expression that expects a 64-bit value, so there is potentially an integer overflow. Fix this by using the BIT_ULL macro to perform the shift and avoid the overflow. Addresses-Coverity: ("Unintentional integer overflow") Fixes: 04a18399 ("net: aquantia: implement data PTP datapath") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
There is a spelling mistake in a netdev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Oct, 2019 21 commits
-
-
YueHaibing authored
remove unneeded semicolon. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
remove unneeded semicolon. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
remove unneeded semicolon. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Remove excess semicolon after closing parenthesis. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== mv88e6xxx: Allow config of ATU hash algorithm v2: Pass a pointer for where the hash should be stored, return a plain errno, or 0. Document the parameter. v3: Document type of parameter, and valid range Add break statements to default clause of switch Directly use ctx->val.vu8 v4: Consistently use devlink, not a mix of devlink and dl. Fix allocation of devlink priv Remove upper case from parameter name Make mask 16 bit wide. v5: Back to using the parameter name ATU_hash v6: Rebase net-next/master ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Some of the marvell switches have bits controlling the hash algorithm the ATU uses for MAC addresses. In some industrial settings, where all the devices are from the same manufacture, and hence use the same OUI, the default hashing algorithm is not optimal. Allow the other algorithms to be selected via devlink. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Add plumbing to allow DSA drivers to register parameters with devlink. To keep with the abstraction, the DSA drivers pass the ds structure to these helpers, and the DSA core then translates that to the devlink structure associated to the device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
One place in the driver was left where the open-coded functionality hasn't been replaced with helper rtl_hw_aspm_clkreq_enable yet. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: b53: Add support for MDB This patch series adds support for programming multicast database entries on b53 and bcm_sf2. This is extracted from a previously submitted series that added managed mode support, but these patches are usable in isolation. The larger series still needs to be reworked. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Leverage the recently add b53_mdb_{add,del,prepare} functions since they work as-is for bcm_sf2. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In preparation for supporting IGMP snooping with or without the use of a bridge, add support within b53_common.c to program the ARL entries for multicast operations. The key difference is that a multicast ARL entry is comprised of a bitmask of enabled ports, instead of a port number. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Matteo Croce says: ==================== mvpp2 improvements in rx path Refactor some code in the RX path to allow prefetching some data from the packet header. The first patch is only a refactor, the second one reduces the data synced, while the third one adds the prefetch. The packet rate improvement with the second patch is very small (1606 => 1620 kpps), while the prefetch bumps it up by 14%: 1620 => 1853 kpps. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
When receiving traffic, eth_type_trans() is high up on the perf top list, because it's the first function which access the packet data. Move the DMA unmap a bit higher, and put a prefetch just after it, so we have more time to load the data into the cache. The packet rate increase is about 14% with a tc drop test: 1620 => 1853 kpps Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
In the RX path we always sync against the maximum frame size for that pool. Do the DMA sync and the unmap separately, so we can only sync by the size of the received frame. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
Move some code down to remove a backward goto. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Fix misspellings of "endpoints", "configuration", and "device's". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Fix misspelling of "endpoint". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Fix misspellings of "disconnect", "disconnecting", "connections", and "disconnected". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Fix various misspellings of "configuration" and "configure". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Vokáč authored
Since commit 0394a63a ("net: dsa: enable and disable all ports") the dsa core disables all unused ports of a switch. In this case disabling ports with numbers higher than QCA8K_NUM_PORTS causes that some switch registers are overwritten with incorrect content. To fix this, initialize the dsa_switch->num_ports with correct number of ports. Fixes: 7e99e347 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Currently ds->dev is dereferenced on the assignments of pdata and np before ds->dev is null checked, hence there is a potential null pointer dereference on ds->dev. Fix this by assigning pdata and np after the ds->dev null pointer sanity check. Addresses-Coverity: ("Dereference before null check") Fixes: 7e99e347 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Oct, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-10-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 52 non-merge commits during the last 11 day(s) which contain a total of 65 files changed, 2604 insertions(+), 1100 deletions(-). The main changes are: 1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF assembly code. The work here teaches BPF verifier to recognize kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints such that verifier allows direct use of bpf_skb_event_output() helper used in tc BPF et al (w/o probing memory access) that dumps skb data into perf ring buffer. Also add direct loads to probe memory in order to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov. 2) Big batch of changes to improve libbpf and BPF kselftests. Besides others: generalization of libbpf's CO-RE relocation support to now also include field existence relocations, revamp the BPF kselftest Makefile to add test runner concept allowing to exercise various ways to build BPF programs, and teach bpf_object__open() and friends to automatically derive BPF program type/expected attach type from section names to ease their use, from Andrii Nakryiko. 3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu. 4) Allow to read BTF as raw data from bpftool. Most notable use case is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa. 5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which manages to improve "rx_drop" performance by ~4%., from Björn Töpel. 6) Fix to restore the flow dissector after reattach BPF test and also fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki. 7) Improve verifier's BTF ctx access for use outside of raw_tp, from Martin KaFai Lau. 8) Improve documentation for AF_XDP with new sections and to reflect latest features, from Magnus Karlsson. 9) Add back 'version' section parsing to libbpf for old kernels, from John Fastabend. 10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(), from KP Singh. 11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order to improve insn coverage for built BPF progs, from Yonghong Song. 12) Misc minor cleanups and fixes, from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Oct, 2019 4 commits
-
-
Roman Mashak authored
Updated config with required kernel options for conntrac TC action, so that tdc can run the tests. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next, more specifically: * Updates for ipset: 1) Coding style fix for ipset comment extension, from Jeremy Sowden. 2) De-inline many functions in ipset, from Jeremy Sowden. 3) Move ipset function definition from header to source file. 4) Move ip_set_put_flags() to source, export it as a symbol, remove inline. 5) Move range_to_mask() to the source file where this is used. 6) Move ip_set_get_ip_port() to the source file where this is used. * IPVS selftests and netns improvements: 7) Two patches to speedup ipvs netns dismantle, from Haishuang Yan. 8) Three patches to add selftest script for ipvs, also from Haishuang Yan. * Conntrack updates and new nf_hook_slow_list() function: 9) Document ct ecache extension, from Florian Westphal. 10) Skip ct extensions from ctnetlink dump, from Florian. 11) Free ct extension immediately, from Florian. 12) Skip access to ecache extension from nf_ct_deliver_cached_events() this is not correct as reported by Syzbot. 13) Add and use nf_hook_slow_list(), from Florian. * Flowtable infrastructure updates: 14) Move priority to nf_flowtable definition. 15) Dynamic allocation of per-device hooks in flowtables. 16) Allow to include netdevice only once in flowtable definitions. 17) Rise maximum number of devices per flowtable. * Netfilter hardware offload infrastructure updates: 18) Add nft_flow_block_chain() helper function. 19) Pass callback list to nft_setup_cb_call(). 20) Add nft_flow_cls_offload_setup() helper function. 21) Remove rules for the unregistered device via netdevice event. 22) Support for multiple devices in a basechain definition at the ingress hook. 22) Add nft_chain_offload_cmd() helper function. 23) Add nft_flow_block_offload_init() helper function. 24) Rewind in case of failing to bind multiple devices to hook. 25) Typo in IPv6 tproxy module description, from Norman Rasmussen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Igor Russkikh says: ==================== net: aquantia: ptp followup fixes Here are two sparse warnings, third patch is a fix for scaled_ppm_to_ppb missing. Eventually I reworked this to exclude ptp module from build. Please consider it instead of this patch: https://patchwork.ozlabs.org/patch/1184171/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
We do disable aq_ptp module build using inline stubs when CONFIG_PTP_1588_CLOCK is not declared. This reduces module size and removes unnecessary code. Reported-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-