- 29 Sep, 2015 7 commits
-
-
Chris Wilson authored
commit 51bc1404 upstream. There have been many hard to track down bugs whereby userspace forgot to flag a write buffer and then cause graphics corruption or a hung GPU when that buffer was later purged under memory pressure (as the buffer appeared clean, its pages would have been evicted rather than preserved and any changes more recent than in the backing storage would be lost). In retrospect this is a rare optimisation against memory pressure, already the slow path. If we always mark the buffer as dirty when accessed by the GPU, anything not used can still be evicted cheaply (ideal behaviour for mark-and-sweep eviction) but we do not run the risk of corruption. For correct read serialisation, userspace still has to notify when the GPU writes to an object. However, there are certain situations under which userspace may wish to tell white lies to the kernel... Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kristian Høgsberg <krh@bitplanet.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: "Goel, Akash" <akash.goel@intel.co> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Jean Delvare authored
commit d3d11fe0 upstream. The temperature registers appear to report values in degrees Celsius while the hwmon API mandates values to be exposed in millidegrees Celsius. Do the conversion so that the values reported by "sensors" are correct. Fixes: aed93e0b ("tg3: Add hwmon support for temperature") Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ville Syrjälä authored
commit 3f8340cc upstream. AUX addresses are 20 bits long. Send out the entire address instead of just the low 16 bits. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Mike Marciniszyn authored
commit d6f1c17e upstream. The lkey table is allocated with with a get_user_pages() with an order based on a number of index bits from a module parameter. The underlying kernel code cannot allocate that many contiguous pages. There is no reason the underlying memory needs to be physically contiguous. This patch: - switches the allocation/deallocation to vmalloc/vfree - caps the number of bits to 23 to insure at least 1 generation bit o this matches the module parameter description Reviewed-by:
Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Yao-Wen Mao authored
commit 6aa6925c upstream. The check of cval->cached should be zero-based (including master channel). Signed-off-by:
Yao-Wen Mao <yaowen@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
David Jeffery authored
commit c9eb256e upstream. There is an issue with xfs's error reporting in some cases of I/O partially failing and partially succeeding. Calls like fsync() can report success even though not all I/O was successful in partial-failure cases such as one disk of a RAID0 array being offline. The issue can occur when there are more than one bio per xfs_ioend struct. Each call to xfs_end_bio() for a bio completing will write a value to ioend->io_error. If a successful bio completes after any failed bio, no error is reported do to it writing 0 over the error code set by any failed bio. The I/O error information is now lost and when the ioend is completed only success is reported back up the filesystem stack. xfs_end_bio() should only set ioend->io_error in the case of BIO_UPTODATE being clear. ioend->io_error is initialized to 0 at allocation so only needs to be updated by a failed bio. Also check that ioend->io_error is 0 so that the first error reported will be the error code returned. Signed-off-by:
David Jeffery <djeffery@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Ard Biesheuvel authored
commit 674c242c upstream. When a task calls execve(), its FP/SIMD state is flushed so that none of the original program state is observeable by the incoming program. However, since this flushing consists of setting the in-memory copy of the FP/SIMD state to all zeroes, the CPU field is set to CPU 0 as well, which indicates to the lazy FP/SIMD preserve/restore code that the FP/SIMD state does not need to be reread from memory if the task is scheduled again on CPU 0 without any other tasks having entered userland (or used the FP/SIMD in kernel mode) on the same CPU in the mean time. If this happens, the FP/SIMD state of the old program will still be present in the registers when the new program starts. So set the CPU field to the invalid value of NR_CPUS when performing the flush, by calling fpsimd_flush_task_state(). Reported-by:
Chunyan Zhang <chunyan.zhang@spreadtrum.com> Reported-by:
Janet Liu <janet.liu@spreadtrum.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
- 28 Sep, 2015 33 commits
-
-
Grant Likely authored
commit 7f5dcaf1 upstream. The unregister path of platform_device is broken. On registration, it will register all resources with either a parent already set, or type==IORESOURCE_{IO,MEM}. However, on unregister it will release everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There are also cases where resources don't get registered in the first place, like with devices created by of_platform_populate()*. Fix the unregister path to be symmetrical with the register path by checking the parent pointer instead of the type field to decide which resources to unregister. This is safe because the upshot of the registration path algorithm is that registered resources have a parent pointer, and non-registered resources do not. * It can be argued that of_platform_populate() should be registering it's resources, and they argument has some merit. However, there are quite a few platforms that end up broken if we try to do that due to overlapping resources in the device tree. Until that is fixed, we need to solve the immediate problem. Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Grant Likely <grant.likely@linaro.org> Tested-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Tested-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David Daney authored
commit 3a496b00 upstream. If the internal call to of_address_to_resource() fails, we end up looping forever in of_find_matching_node_by_address(). This can be caused by a defective device tree, or calling with an incorrect matches argument. Fix by calling of_find_matching_node() unconditionally at the end of the loop. Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
-
Adrien Schildknecht authored
commit 1642d09f upstream. The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043 Signed-off-by:
Adrien Schildknecht <adrien+dev@schischi.me> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Jan H. Schönherr authored
commit dd9d3843 upstream. There is a race condition in SMP bootup code, which may result in WARNING: CPU: 0 PID: 1 at kernel/workqueue.c:4418 workqueue_cpu_up_callback() or kernel BUG at kernel/smpboot.c:135! It can be triggered with a bit of luck in Linux guests running on busy hosts. CPU0 CPUn ==== ==== _cpu_up() __cpu_up() start_secondary() set_cpu_online() cpumask_set_cpu(cpu, to_cpumask(cpu_online_bits)); cpu_notify(CPU_ONLINE) <do stuff, see below> cpumask_set_cpu(cpu, to_cpumask(cpu_active_bits)); During the various CPU_ONLINE callbacks CPUn is online but not active. Several things can go wrong at that point, depending on the scheduling of tasks on CPU0. Variant 1: cpu_notify(CPU_ONLINE) workqueue_cpu_up_callback() rebind_workers() set_cpus_allowed_ptr() This call fails because it requires an active CPU; rebind_workers() ends with a warning: WARNING: CPU: 0 PID: 1 at kernel/workqueue.c:4418 workqueue_cpu_up_callback() Variant 2: cpu_notify(CPU_ONLINE) smpboot_thread_call() smpboot_unpark_threads() .. __kthread_unpark() __kthread_bind() wake_up_state() .. select_task_rq() select_fallback_rq() The ->wake_cpu of the unparked thread is not allowed, making a call to select_fallback_rq() necessary. Then, select_fallback_rq() cannot find an allowed, active CPU and promptly resets the allowed CPUs, so that the task in question ends up on CPU0. When those unparked tasks are eventually executed, they run immediately into a BUG: kernel BUG at kernel/smpboot.c:135! Just changing the order in which the online/active bits are set (and adding some memory barriers), would solve the two issues above. However, it would change the order of operations back to the one before commit 6acbfb96 ("sched: Fix hotplug vs. set_cpus_allowed_ptr()"), thus, reintroducing that particular problem. Going further back into history, we have at least the following commits touching this topic: - commit 2baab4e9 ("sched: Fix select_fallback_rq() vs cpu_active/cpu_online") - commit 5fbd036b ("sched: Cleanup cpu_active madness") Together, these give us the following non-working solutions: - secondary CPU sets active before online, because active is assumed to be a subset of online; - secondary CPU sets online before active, because the primary CPU assumes that an online CPU is also active; - secondary CPU sets online and waits for primary CPU to set active, because it might deadlock. Commit 875ebe94 ("powerpc/smp: Wait until secondaries are active & online") introduces an arch-specific solution to this arch-independent problem. Now, go for a more general solution without explicit waiting and simply set active twice: once on the secondary CPU after online was set and once on the primary CPU after online was seen. set_cpus_allowed_ptr()") Signed-off-by:
Jan H. Schönherr <jschoenh@amazon.de> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Anton Blanchard <anton@samba.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Joerg Roedel <jroedel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Wilson <msw@amazon.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 6acbfb96 ("sched: Fix hotplug vs. set_cpus_allowed_ptr()") Link: http://lkml.kernel.org/r/1439408156-18840-1-git-send-email-jschoenh@amazon.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jan Kara authored
commit 03754234 upstream. Users have occasionally reported that file type for some directory entries is wrong. This mostly happened after updating libraries some libraries. After some debugging the problem was traced down to xfs_dir2_node_replace(). The function uses args->filetype as a file type to store in the replaced directory entry however it also calls xfs_da3_node_lookup_int() which will store file type of the current directory entry in args->filetype. Thus we fail to change file type of a directory entry to a proper type. Fix the problem by storing new file type in a local variable before calling xfs_da3_node_lookup_int(). Reported-by:
Giacomo Comes <comes@naic.edu> Signed-off-by:
Jan Kara <jack@suse.com> Reviewed-by:
-
Stephen Chandler Paul authored
commit 924f92bf upstream. Most of the time this isn't an issue since hotplugging an adaptor will trigger a crtc mode change which in turn, causes the driver to probe every DisplayPort for a dpcd. However, in cases where hotplugging doesn't cause a mode change (specifically when one unplugs a monitor from a DisplayPort connector, then plugs that same monitor back in seconds later on the same port without any other monitors connected), we never probe for the dpcd before starting the initial link training. What happens from there looks like this: - GPU has only one monitor connected. It's connected via DisplayPort, and does not go through an adaptor of any sort. - User unplugs DisplayPort connector from GPU. - Change in HPD is detected by the driver, we probe every DisplayPort for a possible connection. - Probe the port the user originally had the monitor connected on for it's dpcd. This fails, and we clear the first (and only the first) byte of the dpcd to indicate we no longer have a dpcd for this port. - User plugs the previously disconnected monitor back into the same DisplayPort. - radeon_connector_hotplug() is called before everyone else, and tries to handle the link training. Since only the first byte of the dpcd is zeroed, the driver is able to complete link training but does so against the wrong dpcd, causing it to initialize the link with the wrong settings. - Display stays blank (usually), dpcd is probed after the initial link training, and the driver prints no obvious messages to the log. In theory, since only one byte of the dpcd is chopped off (specifically, the byte that contains the revision information for DisplayPort), it's not entirely impossible that this bug may not show on certain monitors. For instance, the only reason this bug was visible on my ASUS PB238 monitor was due to the fact that this monitor using the enhanced framing symbol sequence, the flag for which is ignored if the radeon driver thinks that the DisplayPort version is below 1.1. Signed-off-by:
Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Benjamin Cama authored
commit 5be9fc23 upstream. Since v3.18, attempts to deliver IRQ0 are rejected, breaking orion5x. Fix this by increasing all interrupts by one, as did 5d6bed2a for dove. Also, force MULTI_IRQ_HANDLER for all orion platforms (including dove) as the specific handler is needed to shift back IRQ numbers by one. [gregory.clement@free-electrons.com]: moved the select MULTI_IRQ_HANDLER from PLAT_ORION_LEGACY to ARCH_ORION5X as it broke the build for dove. Fixes: a71b092a ("ARM: Convert handle_IRQ to use __handle_domain_irq") Signed-off-by:
Benjamin Cama <benoar@dolka.fr> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by:
Detlef Vollmann <dv@vollmann.ch> Signed-off-by:
-
Filipe Manana authored
commit 1f9b8c8f upstream. While we are committing a transaction, it's possible the previous one is still finishing its commit and therefore we wait for it to finish first. However we were not checking if that previous transaction ended up getting aborted after we waited for it to commit, so we ended up committing the current transaction which can lead to fs corruption because the new superblock can point to trees that have had one or more nodes/leafs that were never durably persisted. The following sequence diagram exemplifies how this is possible: CPU 0 CPU 1 transaction N starts (...) btrfs_commit_transaction(N) cur_trans->state = TRANS_STATE_COMMIT_START; (...) cur_trans->state = TRANS_STATE_COMMIT_DOING; (...) cur_trans->state = TRANS_STATE_UNBLOCKED; root->fs_info->running_transaction = NULL; btrfs_start_transaction() --> starts transaction N + 1 btrfs_write_and_wait_transaction(trans, root); --> starts writing all new or COWed ebs created at transaction N creates some new ebs, COWs some existing ebs but doesn't COW or deletes eb X btrfs_commit_transaction(N + 1) (...) cur_trans->state = TRANS_STATE_COMMIT_START; (...) wait_for_commit(root, prev_trans); --> prev_trans == transaction N btrfs_write_and_wait_transaction() continues writing ebs --> fails writing eb X, we abort transaction N and set bit BTRFS_FS_STATE_ERROR on fs_info->fs_state, so no new transactions can start after setting that bit cleanup_transaction() btrfs_cleanup_one_transaction() wakes up task at CPU 1 continues, doesn't abort because cur_trans->aborted (transaction N + 1) is zero, and no checks for bit BTRFS_FS_STATE_ERROR in fs_info->fs_state are made btrfs_write_and_wait_transaction(trans, root); --> succeeds, no errors during writeback write_ctree_super(trans, root, 0); --> succeeds --> we have now a superblock that points us to some root that uses eb X, which was never written to disk In this scenario future attempts to read eb X from disk results in an error message like "parent transid verify failed on X wanted Y found Z". So fix this by aborting the current transaction if after waiting for the previous transaction we verify that it was aborted. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Jeff Vander Stoep authored
commit bf0c4e04 upstream. Move the poison pointer offset to 0xdead000000000000, a recognized value that is not mappable by user-space exploits. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Thierry Strudel <tstrudel@google.com> Signed-off-by:
Jeff Vander Stoep <jeffv@google.com> Signed-off-by:
-
Jan Kara authored
commit ffeecc52 upstream. struct xfs_attr_leafblock contains 'entries' array which is declared with size 1 altough it can in fact contain much more entries. Since this array is followed by further struct members, gcc (at least in version 4.8.3) thinks that the array has the fixed size of 1 element and thus may optimize away all accesses beyond the end of array resulting in non-working code. This problem was only observed with userspace code in xfsprogs, however it's better to be safe in kernel as well and have matching kernel and xfsprogs definitions. Signed-off-by:
-
Darrick J. Wong authored
commit 2f123bce upstream. In the dir3 data block readahead function, use the regular read verifier to check the block's CRC and spot-check the block contents instead of directly calling only the spot-checking routine. This prevents corrupted directory data blocks from being read into the kernel, which can lead to garbage ls output and directory loops (if say one of the entries contains slashes and other junk). Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
-
Tyler Hicks authored
commit 5556e7e6 upstream. Consider eCryptfs dcache entries to be stale when the corresponding lower inode's i_nlink count is zero. This solves a problem caused by the lower inode being directly modified, without going through the eCryptfs mount, leaving stale eCryptfs dentries cached and the eCryptfs inode's i_nlink count not being cleared. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reported-by:
Richard Weinberger <richard@nod.at> [ luis: backported to 3.16: - use dentry->d_inode instead of d_inode(dentry) - adjusted context ] Signed-off-by:
-
Don Zickus authored
commit 3af4e5a9 upstream. It was reported that after 10-20 reboots, a usb keyboard plugged into a docking station would not work unless it was replugged in. Using usbmon, it turns out the interrupt URBs were streaming with callback errors of -71 for some reason. The hid-core.c::hid_io_error was supposed to retry and then reset, but the reset wasn't really happening. The check for HID_NO_BANDWIDTH was inverted. Fix was simple. Tested by reporter and locally by me by unplugging a keyboard halfway until I could recreate a stream of errors but no disconnect. Signed-off-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Shota Suzuki authored
commit 72ddef05 upstream. When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is set if adapter->rss_queues exceeds half of max_rss_queues in igb_init_queue_configuration(). On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of queues exceeds half of max_combined in igb_set_channels() when changing the number of queues by "ethtool -L". In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size of adapter->msix_entries[], an overflow can occur in igb_set_interrupt_capability(), which in turn leads to an oops. Fix this problem as follows: - When changing the number of queues by "ethtool -L", set IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver. - When increasing the size of q_vector, reallocate it appropriately. (With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.) Another possible way to fix this problem is to cap the queues at its initial number, which is the number of the initial online cpus. But this is not the optimal way because we cannot increase queues when another cpu becomes online. Note that before commit cd14ef54 ("igb: Change to use statically allocated array for MSIx entries"), this problem did not cause oops but just made the number of queues become 1 because of entering msi_only mode in igb_set_interrupt_capability(). Fixes: 907b7835 ("igb: Add ethtool support to configure number of channels") Signed-off-by:
Shota Suzuki <suzuki_shota_t3@lab.ntt.co.jp> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
David Ward authored
commit 44840dec upstream. This is an HP-branded Sierra Wireless EM7355: https://bugzilla.redhat.com/show_bug.cgi?id=1223646#c2Signed-off-by:
David Ward <david.ward@ll.mit.edu> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Matthijs Kooijman authored
commit 1fb8dc36 upstream. CustomWare uses the FTDI VID with custom PIDs for their ShipModul MiniPlex products. Signed-off-by:
Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by:
-
Philipp Hachtmann authored
commit 951d3793 upstream. The driver used usb_get_serial_data(port->serial) which compiled but resulted in a NULL pointer being returned (and subsequently used). I did not go deeper into this but I guess this is a regression. Signed-off-by:
Philipp Hachtmann <hachti@hachti.de> Fixes: a85796ee ("USB: symbolserial: move private-data allocation to port_probe") Acked-by:
-
Peter Chen authored
commit 0521cfd0 upstream. The ehci platform device's drvdata is the pointer of struct usb_hcd already, so we doesn't need to call bus_to_hcd conversion again. Signed-off-by:
Peter Chen <peter.chen@freescale.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Kinglong Mee authored
commit 18e3b739 upstream. ---Steps to Reproduce-- <nfs-server> # cat /etc/exports /nfs/referal *(rw,insecure,no_subtree_check,no_root_squash,crossmnt) /nfs/old *(ro,insecure,subtree_check,root_squash,crossmnt) <nfs-client> # mount -t nfs nfs-server:/nfs/ /mnt/ # ll /mnt/*/ <nfs-server> # cat /etc/exports /nfs/referal *(rw,insecure,no_subtree_check,no_root_squash,crossmnt,refer=/nfs/old/@nfs-server) /nfs/old *(ro,insecure,subtree_check,root_squash,crossmnt) # service nfs restart <nfs-client> # ll /mnt/*/ --->>>>> oops here [ 5123.102925] BUG: unable to handle kernel NULL pointer dereference at (null) [ 5123.103363] IP: [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4] [ 5123.103752] PGD 587b9067 PUD 3cbf5067 PMD 0 [ 5123.104131] Oops: 0000 [#1] [ 5123.104529] Modules linked in: nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi coretemp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon parport_pc parport i2c_piix4 shpchp auth_rpcgss nfs_acl vmw_vmci lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi serio_raw scsi_transport_spi e1000 mptscsih mptbase ata_generic pata_acpi [last unloaded: nfsd] [ 5123.105887] CPU: 0 PID: 15853 Comm: ::1-manager Tainted: G OE 4.2.0-rc6+ #214 [ 5123.106358] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014 [ 5123.106860] task: ffff88007620f300 ti: ffff88005877c000 task.ti: ffff88005877c000 [ 5123.107363] RIP: 0010:[<ffffffffa03ed38b>] [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4] [ 5123.107909] RSP: 0018:ffff88005877fdb8 EFLAGS: 00010246 [ 5123.108435] RAX: ffff880053f3bc00 RBX: ffff88006ce6c908 RCX: ffff880053a0d240 [ 5123.108968] RDX: ffffea0000e6d940 RSI: ffff8800399a0000 RDI: ffff88006ce6c908 [ 5123.109503] RBP: ffff88005877fe28 R08: ffffffff81c708a0 R09: 0000000000000000 [ 5123.110045] R10: 00000000000001a2 R11: ffff88003ba7f5c8 R12: ffff880054c55800 [ 5123.110618] R13: 0000000000000000 R14: ffff880053a0d240 R15: ffff880053a0d240 [ 5123.111169] FS: 0000000000000000(0000) GS:ffffffff81c27000(0000) knlGS:0000000000000000 [ 5123.111726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5123.112286] CR2: 0000000000000000 CR3: 0000000054cac000 CR4: 00000000001406f0 [ 5123.112888] Stack: [ 5123.113458] ffffea0000e6d940 ffff8800399a0000 00000000000167d0 0000000000000000 [ 5123.114049] 0000000000000000 0000000000000000 0000000000000000 00000000a7ec82c6 [ 5123.114662] ffff88005877fe18 ffffea0000e6d940 ffff8800399a0000 ffff880054c55800 [ 5123.115264] Call Trace: [ 5123.115868] [<ffffffffa03fb44b>] nfs4_try_migration+0xbb/0x220 [nfsv4] [ 5123.116487] [<ffffffffa03fcb3b>] nfs4_run_state_manager+0x4ab/0x7b0 [nfsv4] [ 5123.117104] [<ffffffffa03fc690>] ? nfs4_do_reclaim+0x510/0x510 [nfsv4] [ 5123.117813] [<ffffffff810a4527>] kthread+0xd7/0xf0 [ 5123.118456] [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160 [ 5123.119108] [<ffffffff816d9cdf>] ret_from_fork+0x3f/0x70 [ 5123.119723] [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160 [ 5123.120329] Code: 4c 8b 6a 58 74 17 eb 52 48 8d 55 a8 89 c6 4c 89 e7 e8 4a b5 ff ff 8b 45 b0 85 c0 74 1c 4c 89 f9 48 8b 55 90 48 8b 75 98 48 89 df <41> ff 55 00 3d e8 d8 ff ff 41 89 c6 74 cf 48 8b 4d c8 65 48 33 [ 5123.121643] RIP [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4] [ 5123.122308] RSP <ffff88005877fdb8> [ 5123.122942] CR2: 0000000000000000 Fixes: ec011fe8 ("NFS: Introduce a vector of migration recovery ops") Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit e9ae58ae upstream. We should ensure that we always set the pgio_header's error field if a READ or WRITE RPC call returns an error. The current code depends on 'hdr->good_bytes' always being initialised to a large value, which is not always done correctly by callers. When this happens, applications may end up missing important errors. Signed-off-by:
-
Max Filippov authored
commit 77d6273e upstream. call12 can't be safely used as the first call in the inline function, because the compiler does not extend the stack frame of the bounding function accordingly, which may result in corruption of local variables. If a call needs to be done, do call8 first followed by call12. For pure assembly code in _switch_to increase stack frame size of the bounding function. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Ming Lei authored
commit 596f5aad upstream. There may be lots of pending requests so that the buffer of PAGE_SIZE can't hold them at all. One typical example is scsi-mq, the queue depth(.can_queue) of scsi_host and blk-mq is quite big but scsi_device's queue_depth is a bit small(.cmd_per_lun), then it is quite easy to have lots of pending requests in hw queue. This patch fixes the following warning and the related memory destruction. [ 359.025101] fill_read_buffer: blk_mq_hw_sysfs_show+0x0/0x7d returned bad count^M [ 359.055595] irq event stamp: 15537^M [ 359.055606] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M [ 359.055614] Dumping ftrace buffer:^M [ 359.055660] (ftrace buffer empty)^M [ 359.055672] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M [ 359.055678] CPU: 4 PID: 21631 Comm: stress-ng-sysfs Not tainted 4.2.0-rc5-next-20150805 #434^M [ 359.055679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M [ 359.055682] task: ffff8802161cc000 ti: ffff88021b4a8000 task.ti: ffff88021b4a8000^M [ 359.055693] RIP: 0010:[<ffffffff811541c5>] [<ffffffff811541c5>] __kmalloc+0xe8/0x152^M Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Ian Abbott authored
commit ad83dbd9 upstream. The "adl_pci7x3x" driver replaced the "adl_pci7230" and "adl_pci7432" drivers in commits 8f567c37 ("staging: comedi: new adl_pci7x3x driver") and 657f77d1 ("staging: comedi: remove adl_pci7230 and adl_pci7432 drivers"). Although the new driver code agrees with the user manuals for the respective boards, digital outputs stopped working on the PCI-7230. This has 16 digital output channels and the previous adl_pci7230 driver shifted the 16 bit output state left by 16 bits before writing to the hardware register. The new adl_pci7x3x driver doesn't do that. Fix it in `adl_pci7x3x_do_insn_bits()` by checking for the special case of the subdevice having only 16 channels and duplicating the 16 bit output state into both halves of the 32-bit register. That should work both for what the board actually does and for what the user manual says it should do. Fixes: 8f567c37 ("staging: comedi: new adl_pci7x3x driver") Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 1d700277 upstream. This way this device can be used with irtty-sir - at least on Toshiba Satellite A20-S103 it is not configured by default and needs PNP activation before it starts to respond on I/O ports. This device has actually its own driver (ali-ircc), but this driver seems to be non-functional for a very long time (see http://permalink.gmane.org/gmane.linux.irda.general/484 http://permalink.gmane.org/gmane.network.protocols.obex.openobex.user/943 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=535070 ). Signed-off-by:
Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
-
Maciej S. Szmigiero authored
commit ffa34de0 upstream. SMSC IrCC SIR/FIR port should not be bound to by (legacy) serial driver so its own driver (smsc-ircc2) can bind to it. Signed-off-by:
-
Kishon Vijay Abraham I authored
commit c329061b upstream. regulator_disable of pbias always writes '0' to the enable_reg. However actual disable value of pbias regulator is not always '0'. Fix it by populating the disable_val in pbias_reg_info for the various platforms and assign it to the disable_val of pbias regulator descriptor. This will be used by regulator_disable_regmap while disabling pbias regulator. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Axel Lin authored
commit 9d835286 upstream. Don't set .read_flag_mask for adav803, it's for adav801 only. Fixes: 0c2d6964 ("ASoC: adav80x: Split SPI and I2C code into different modules") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Xie XiuQi authored
commit 1b484655 upstream. Zhang Liguang reported the following issue: 1) System detects a CMCI storm on the current CPU. 2) Kernel disables the CMCI interrupt on banks owned by the current CPU and switches to poll mode 3) After the CMCI storm subsides, kernel switches back to interrupt mode 4) We expect the system to reenable the CMCI interrupt on banks owned by the current CPU mce_intel_adjust_timer |-> cmci_reenable |-> cmci_discover # owned banks are ignored here static void cmci_discover(int banks) ... for (i = 0; i < banks; i++) { ... if (test_bit(i, owned)) # ownd banks is ignore here continue; So convert cmci_storm_disable_banks() to cmci_toggle_interrupt_mode() which controls whether to enable or disable CMCI interrupts with its argument. NB: We cannot clear the owned bit because the banks won't be polled, otherwise. See: 27f6c573 ("x86, CMCI: Add proper detection of end of CMCI storms") for more info. Reported-by:
Zhang Liguang <zhangliguang@huawei.com> Signed-off-by:
Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: huawei.libin@huawei.com Cc: linux-edac <linux-edac@vger.kernel.org> Cc: rui.xiang@huawei.com Link: http://lkml.kernel.org/r/1439396985-12812-10-git-send-email-bp@alien8.deSigned-off-by:
-
Eric W. Biederman authored
commit 4b75de86 upstream. Before the make_empty_dir_inode calls were introduce into proc, sysfs, and sysctl those directories when stated reported an i_size of 0. make_empty_dir_inode started reporting an i_size of 2. At least one userspace application depended on stat returning i_size of 0. So modify make_empty_dir_inode to cause an i_size of 0 to be reported for these directories. Reported-by:
Tejun Heo <tj@kernel.org> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit 12c641ab upstream. In the logic in the initial commit of unshare made creating a new thread group for a process, contingent upon creating a new memory address space for that process. That is wrong. Two separate processes in different thread groups can share a memory address space and clone allows creation of such proceses. This is significant because it was observed that mm_users > 1 does not mean that a process is multi-threaded, as reading /proc/PID/maps temporarily increments mm_users, which allows other processes to (accidentally) interfere with unshare() calls. Correct the check in check_unshare_flags() to test for !thread_group_empty() for CLONE_THREAD, CLONE_SIGHAND, and CLONE_VM. For sighand->count > 1 for CLONE_SIGHAND and CLONE_VM. For !current_is_single_threaded instead of mm_users > 1 for CLONE_VM. By using the correct checks in unshare this removes the possibility of an accidental denial of service attack. Additionally using the correct checks in unshare ensures that only an explicit unshare(CLONE_VM) can possibly trigger the slow path of current_is_single_threaded(). As an explict unshare(CLONE_VM) is pointless it is not expected there are many applications that make that call. Fixes: b2e0d987 userns: Implement unshare of the user namespace Reported-by:
Ricky Zhou <rickyz@chromium.org> Reported-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
NeilBrown authored
commit efcbc04e upstream. It is unusual to combine the open flags O_RDONLY and O_EXCL, but it appears that libre-office does just that. [pid 3250] stat("/home/USER/.config", {st_mode=S_IFDIR|0700, st_size=8192, ...}) = 0 [pid 3250] open("/home/USER/.config/libreoffice/4-suse/user/extensions/buildid", O_RDONLY|O_EXCL <unfinished ...> NFSv4 takes O_EXCL as a sign that a setattr command should be sent, probably to reset the timestamps. When it was an O_RDONLY open, the SETATTR command does not identify any actual attributes to change. If no delegation was provided to the open, the SETATTR uses the all-zeros stateid and the request is accepted (at least by the Linux NFS server - no harm, no foul). If a read-delegation was provided, this is used in the SETATTR request, and a Netapp filer will justifiably claim NFS4ERR_BAD_STATEID, which the Linux client takes as a sign to retry - indefinitely. So only treat O_EXCL specially if O_CREAT was also given. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Cristina Opriceana authored
commit 41d903c0 upstream. Negative return values are not supported by iio_event_poll since its return type is unsigned int. Fixes: f18e7a06 ("iio: Return -ENODEV for file operations if the device has been unregistered") Signed-off-by:
Cristina Opriceana <cristina.opriceana@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Cristina Opriceana authored
commit 1bdc0293 upstream. Change return value to 0 if no device is bound since unsigned int cannot support negative error codes. Fixes: f18e7a06 ("iio: Return -ENODEV for file operations if the device has been unregistered") Signed-off-by:
-
