- 13 Dec, 2016 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC updates from Borislav Petkov: - add KNM support to sb_edac (Piotr Luc) - add AMD Zen support to amd64_edac (Yazen Ghannam) - misc small cleanups, improvements and fixes (Colin Ian King, Dave Hansen, Pan Bian, Thor Thayer, Wei Yongjun, Yanjiang Jin, yours truly) * tag 'edac_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (26 commits) EDAC, amd64: Fix improper return value EDAC, amd64: Improve amd64-specific printing macros EDAC, amd64: Autoload amd64_edac_mod on Fam17h systems EDAC, amd64: Define and register UMC error decode function EDAC, amd64: Determine EDAC capabilities on Fam17h systems EDAC, amd64: Determine EDAC MC capabilities on Fam17h EDAC, amd64: Add Fam17h debug output EDAC, amd64: Add Fam17h scrubber support EDAC, mce_amd: Don't report poison bit on Fam15h, bank 4 EDAC, amd64: Read MC registers on AMD Fam17h EDAC, amd64: Reserve correct PCI devices on AMD Fam17h EDAC, amd64: Add AMD Fam17h family type and ops EDAC, amd64: Extend ecc_enabled() to Fam17h EDAC, amd64: Don't force-enable ECC checking on newer systems EDAC, amd64: Add Deferred Error type EDAC, amd64: Rename __log_bus_error() to be more specific EDAC, amd64: Change target of pci_name from F2 to F3 EDAC, mce_amd: Rename nb_bus_decoder to dram_ecc_decoder EDAC: Add LRDDR4 DRAM type EDAC, mpc85xx: Implement remove method for the platform driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management updates from Zhang Rui: - Thermal core code reorganization and cleanup. Two new files are created for thermal sysfs I/F code and thermal helper functions (Eduardo Valentin). - Sanitize hotplug and locking for x86_pkg_temp driver (Thomas Gleixner) - Update MAINTAINER file for pwm-fan driver and Samsung thermal driver (Lukasz Majewski) - Fix module auto-load for max77620, tango and db8500 thermal driver (Javier Martinez Canillas) - Fix a bug that thermal hwmon sysfs I/F returns wrong critical trip point temperature value (Krzysztof Kozlowski) - Add Skylake PCH 100 series support for intel_pch_thermal driver (OGAWA Hirofumi) - Small fixes and cleanups for platform thermal drivers (Julia Lawall, Luis Henriques, Leo Yan, Stephen Boyd, Shawn Lin, Javi Merino and Lukasz Luba) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (76 commits) MAINTAINERS: Samsung: Update maintainer for PWM FAN and SAMSUNG THERMAL thermal/x86 pkg temp: Convert to hotplug state machine thermal/x86_pkg_temp: Sanitize package management thermal/x86_pkg_temp: Move work into package struct thermal/x86_pkg_temp: Move work scheduled flag into package struct thermal/x86_pkg_temp: Sanitize locking thermal/x86_pkg_temp: Cleanup code some more thermal/x86_pkg_temp: Cleanup namespace thermal/x86_pkg_temp: Get rid of ref counting thermal/x86_pkg_temp: Sanitize callback (de)initialization thermal/x86_pkg_temp: Replace open coded cpu search thermal/x86_pkg_temp: Remove redundant package search thermal/x86_pkg_temp: Cleanup thermal interrupt handling thermal: hwmon: Properly report critical temperature in sysfs devfreq_cooling: pass a pointer to devfreq in the power model callbacks devfreq_cooling: make the structs devfreq_cooling_xxx visible for all dt-bindings: rockchip-thermal: fix the misleading description thermal: rockchip: improve the warning log thermal: db8500: Fix module autoload thermal: tango: Fix module autoload ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "This is a fairly quiet release. We don't have any patches to the core framework. The only patch that can even be considered "core" adds another clk_get() variant. The rest of the changes are in drivers for various SoCs, and we have a few bits for ARM shmobile architecture code (dts and mach) due to the dependency we're breaking between shmobile architecture code and its clk driver. Those shmobile bits have also been pulled into arm-soc tree. Here's the summary: Core: - Support for devm_get_clk_from_child() used with DT bindings that have subnodes with the 'clocks' property New Drivers: - Allwinner A64 (sun50i) - i.MX imx6ull - Socionext's UniPhier SoC CPUs - Mediatek MT2701 SoCs - Rockchip rk1108 SoCs - Qualcomm MSM8994/MSM8992 SoCS - Qualcomm RPM Clocks - Hisilicon Hi3516CV300 and Hi3798CV200 CRG - Oxford Semiconductor OX820 and OX810SE SoCs - Renesas RZ/G1M and RZ/GIE SoCs - Renesas R-Car RST driver for mode pin states Updates: - Four Allwinner SoCs are migrated to the new style clk driver - Rockchip rk3399,rk3066 PLL optimizations - i.MX LVDS display glitch fixes and AV PLL precision improvements - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL support - Explicit demodularization of always builtin drivers - Freescale Qoriq ls1012a and ls1046a support - Exynos 5433 parent typo fix and critical clock tagging - Renesas r8a7743/r8a7745 CPG - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support - stm32f4* LSI, LSE, RTC, and QSPI clocks - pxa27x and pxa25x cpufreq as clks - TI omap36xx sprz319 advisory 2.1 workaround - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate() clk: add devm_get_clk_from_child() API clk: st: clk-flexgen: Unmap region obtained by of_iomap clk: keystone: pll: Unmap region obtained by of_iomap clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc clk: cdce925: Fix limit check clk: bcm: Make COMMON_CLK_IPROC into a library clk: qoriq: added ls1012a clock configuration clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock clk: bcm: Support rate change propagation on bcm2835 clocks clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk clk: ti: omap36xx: Work around sprz319 advisory 2.1 clk: clk-wm831x: fix a logic error clk: uniphier: add cpufreq data for LD11, LD20 SoCs clk: uniphier: add CPU-gear change (cpufreq) support clk: qcom: Put venus core0/1 gdscs to hw control mode clk: qcom: gdsc: Add support for gdscs with HW control ...
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "Argument validation in public functions, function stubs for COMPILE_TEST-ing clients, preparation for exposing rpmsg endponts to user space and minor Qualcomm SMD fixes" * tag 'rpmsg-v4.10' of git://github.com/andersson/remoteproc: dt-binding: soc: qcom: smd: Add label property rpmsg: qcom_smd: Correct return value for O_NONBLOCK rpmsg: Provide function stubs for API rpmsg: Handle invalid parameters in public API rpmsg: Support drivers without primary endpoint rpmsg: Introduce a driver override mechanism rpmsg: smd: Reduce restrictions when finding channel
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: - introduce remoteproc "subdevice" support, which allows remoteproc driver to associate devices to the "running" state of the remoteproc, allowing devices to be probed and removed as the remote processor is booted, shut down or recovering from a crash. - handling of virtio device resources was improved, vring memory is now allocated as part of other memory allocation. This ensures that all vrings for all virtio devices are allocated before we boot the remote processor. - the debugfs mechanism for starting and stopping remoteproc instances was replaced with a sysfs interface, also providing a mechanism for specifying firmware to use by the instance. This allows user space to load and boot use case specific firmware on remote processors. - new drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as removal of the unused StE modem loader. - finally support for crash recovery in the Qualcomm Wirelss subsystem (used for WiFi/BT/FM on a number of platforms) and a number of bug fixes and cleanups * tag 'rproc-v4.10' of git://github.com/andersson/remoteproc: (49 commits) remoteproc: qcom_adsp_pil: select qcom_scm remoteproc: Drop wait in __rproc_boot() remoteproc/ste: Delete unused driver remoteproc: Remove "experimental" warning remoteproc: qcom_adsp_pil: select qcom_scm dt-binding: soc: qcom: smd: Add label property remoteproc: qcom: mdt_loader: add include for sizes remoteproc: Update last rproc_put users to rproc_free remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLE remoteproc: wcnss-pil: add QCOM_SMD dependency dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'" remoteproc: Add support for xo clock remoteproc: adsp-pil: fix recursive dependency remoteproc: Introduce Qualcomm ADSP PIL dt-binding: remoteproc: Introduce ADSP loader binding remoteproc: qcom_wcnss: Fix circular module dependency remoteproc: Merge table_ptr and cached_table pointers remoteproc: Remove custom vdev handler list remoteproc: Update max_notifyid as we allocate vrings remoteproc: Decouple vdev resources and devices ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "It's been an busy period for mmc. Quite some changes in the mmc core, two new mmc host drivers, some existing drivers being extended to support new IP versions and lots of other updates. MMC core: - Delete eMMC packed command support - Introduce mmc_abort_tuning() to enable eMMC tuning to fail gracefully - Introduce mmc_can_retune() to see if a host can be retuned - Re-work and improve the sequence when sending a CMD6 for mmc - Enable CDM13 polling when switching to HS and HS DDR mode for mmc - Relax checking for CMD6 errors after switch to HS200 - Re-factoring the code dealing with the mmc block queue - Recognize whether the eMMC card supports CMDQ - Fix 4K native sector check - Don't power off the card when starting the host - Increase MMC_IOC_MAX_BYTES to support bigger firmware binaries - Improve error handling and drop meaningless BUG_ONs() - Lots of clean-ups and changes to improve the quality of the code MMC host: - sdhci: Fix tuning sequence and clean-up the related code - sdhci: Add support to via DT override broken SDHCI cap register bits - sdhci-cadence: Add new driver for Cadence SD4HC SDHCI variant - sdhci-msm: Update clock management - sdhci-msm: Add support for eMMC HS400 mode - sdhci-msm: Deploy runtime/system PM support - sdhci-iproc: Extend driver support to newer IP versions - sdhci-pci: Add support for Intel GLK - sdhci-pci: Add support for Intel NI byt sdio - sdhci-acpi: Add support for 80860F14 UID 2 SDIO bus - sdhci: Lots of various small improvements and clean-ups - tmio: Add support for tuning - sh_mobile_sdhi: Add support for tuning - sh_mobile_sdhi: Extend driver to support SDHI IP on R7S72100 SoC - sh_mobile_sdhi: remove support for sh7372 - davinci: Use mmc_of_parse() to enable generic mmc DT bindings - meson: Add new driver to support GX platforms - dw_mmc: Deploy generic runtime/system PM support - dw_mmc: Lots of various small improvements As a part of the mmc changes this time, I have also pulled in an immutable branch/tag (soc-device-match-tag1) hosted by Geert Uytterhoeven, to share the implementation of the new soc_device_match() interface. This is needed by these mmc related changes: - mmc: sdhci-of-esdhc: Get correct IP version for T4240-R1.0-R2.0 - soc: fsl: add GUTS driver for QorIQ platforms" * tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (136 commits) mmc: sdhci-cadence: add Cadence SD4HC support mmc: sdhci: export sdhci_execute_tuning() mmc: sdhci: Tidy tuning loop mmc: sdhci: Simplify tuning block size logic mmc: sdhci: Factor out tuning helper functions mmc: sdhci: Use mmc_abort_tuning() mmc: mmc: Introduce mmc_abort_tuning() mmc: sdhci: Always allow tuning to fall back to fixed sampling mmc: sdhci: Fix tuning reset after exhausting the maximum number of loops mmc: sdhci: Fix recovery from tuning timeout Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure" mmc: mmc: Relax checking for switch errors after HS200 switch mmc: sdhci-acpi: support 80860F14 UID 2 SDIO bus mmc: sdhci-of-at91: remove bogus MMC_SDHCI_IO_ACCESSORS select mmc: sdhci-pci: Use ACPI to get max frequency for Intel NI byt sdio mmc: sdhci-pci: Add PCI ID for Intel NI byt sdio mmc: sdhci-s3c: add spin_unlock_irq() before calling clk_round_rate mmc: dw_mmc: display the clock message only one time when card is polling mmc: dw_mmc: add the debug message for polling and non-removable mmc: dw_mmc: check the "present" variable before checking flags ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator updates from Mark Brown: "A quiet release for the regulator API, conference season must've been slowing everyone down: - a new interface allowing drivers to provide an interface for reading a more detailed description of error conditions which allows devices using these regulators to build - ACPI support for the fixed voltage regulator. - cleanups for the TI TWL drivers to reduce code duplication" * tag 'regulator-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits) regulator: tps65086: Fix 25mV ranges for BUCK regulators 1, 2, and 6 regulator: Fix regulator_get_error_flags() signature mismatch regulator: core: add newline in debug message regulator: tps65086: Fix 25mV ranges for BUCK regulators regulator: core: Correct type of mode in regulator_mode_constrain regulator: max77620: add documentation for MPOK property regulator: max77620: add support to configure MPOK regulator: twl6030: Remove unused fields from struct twlreg_info regulator: twl: Remove unused fields from struct twlreg_info regulator: twl: split twl6030 logic into its own file regulator: twl: kill unused functions regulator: twl: make driver DT only regulator: twl-regulator: rework fixed regulator definition regulator: max77620: remove unused variable regulator: pwm: Add missing quotes to DT example regulator: stw481x-vmmc: fix ages old enable error regulator: gpio: properly check return value of of_get_named_gpio regulator: lp873x: Add support for populating input supply regulator: axp20x: Fix axp809 ldo_io registration error on cold boot regulators: helpers: Fix handling of bypass_val_on in get_bypass_regmap ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fixlet from Mark Brown: "The only change for regmap this merge window is a single fix for an unused variable" * tag 'regmap-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: cache: Remove unused 'blksize' variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds authored
Pull LED updates from Jacek Anaszewski: - userspace LED class driver - it can be useful for testing triggers and can also be used to implement virtual LEDs - LED class driver for NIC78bx device - LED core fixes for preventing potential races while setting brightness when software blinking is enabled - improvements in LED documentation to mention semantics on changing brightness while trigger is active * tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: Add ACPI support leds: netxbig: fix module autoload for OF registration leds: pca963x: Add ACPI support leds: leds-cobalt-raq: use builtin_platform_driver led: core: Fix blink_brightness setting race led: core: Use atomic bit-field for the blink-flags leds: Add user LED driver for NIC78bx device leds: verify vendor and change license in mlxcpld driver leds: pca963x: enable low-power state leds: pca9532: Use default trigger value from platform data leds: pca963x: workaround group blink scaling issue cleanup LED documentation and make it match reality leds: lp3952: Export I2C module alias information for module autoload leds: mc13783: Fix MC13892 keypad led access ledtrig-cpu.c: fix english leds/leds-lp5523.txt: make documentation match reality tools/leds: Add uledmon program for monitoring userspace LEDs leds: Use macro for max device node name size leds: Introduce userspace LED class driver mfd: qcom-pm8xxx: Clean up PM8XXX namespace
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl updates from Linus Walleij: "Bulk pin control changes for the v4.10 kernel cycle: No core changes this time. Mainly gradual improvement and feature growth in the drivers. New drivers: - New driver for TI DA850/OMAP-L138/AM18XX pinconf - The SX150x was moved over from the GPIO subsystem and reimagined as a pin control driver with GPIO support in a joint effort by three independent users of this hardware. The result was amazingly good! - New subdriver for the Oxnas OX820 Improvements: - The sunxi driver now supports the generic pin control bindings rather than the sunxi-specific. Add debouncing support to the driver. - Simplifications in pinctrl-single adding a generic parser. - Two downstream fixes and move the Raspberry Pi BCM2835 over to use the generic GPIOLIB_IRQCHIP" * tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits) pinctrl: sx150x: use new nested IRQ infrastructure pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505 pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced' pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147] pinctrl: mt8173: set GPIO16 to usb iddig mode pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf devicetree: bindings: pinctrl: Add binding for ti,da850-pupd Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition pinctrl: intel: set default handler to be handle_bad_irq() pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507 pinctrl: sx150x: sort chips by part number pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508) pinctrl: imx: fix imx_pinctrl_desc initialization pinctrl: sx150x: support setting multiple pins at once pinctrl: sx150x: various spelling fixes and some white-space cleanup pinctrl: mediatek: use builtin_platform_driver pinctrl: stm32: use builtin_platform_driver pinctrl: sunxi: Testing the wrong variable pinctrl: nomadik: split up and comments MC0 pins ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO updates from Luinus Walleij: "Bulk GPIO changes for the v4.10 kernel cycle: Core changes: - Simplify threaded interrupt handling: instead of passing numbed parameters to gpiochip_irqchip_add_chained() we create a new call: gpiochip_irqchip_add_nested() so the two types are clearly semantically different. Also make sure that all nested chips call gpiochip_set_nested_irqchip() which is necessary for IRQ resend to work properly if it happens. - Return error on seek operations for the chardev. - Clamp values set as part of gpio[d]_direction_output() so that anything != 0 will be send down to the driver as "1" not the value passed in. - ACPI can now support naming of GPIO lines, hogs and holes in the GPIO lists. New drivers: - The SX150x driver was deemed unfit for the GPIO subsystem and was moved over to a combined GPIO+pinctrl driver in the pinctrl subsystem. New features: - Various cleanups to various drivers" * tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits) gpio: merrifield: Implement gpio_get_direction callback gpio: merrifield: Add support for hardware debouncer gpio: chardev: Return error for seek operations gpio: arizona: Tidy up probe error path gpio: arizona: Remove pointless set of platform drvdata gpio: pl061: delete platform data handling gpio: pl061: move platform data into driver gpio: pl061: rename variable from chip to pl061 gpio: pl061: rename state container struct gpio: pl061: use local state for parent IRQ storage gpio: set explicit nesting on drivers gpio: simplify adding threaded interrupts gpio: vf610: use builtin_platform_driver gpio: axp209: use correct register for GPIO input status gpio: stmpe: fix interrupt handling bug gpio: em: depnd on ARCH_SHMOBILE gpio: zx: depend on ARCH_ZX gpio: x86: update config dependencies for x86 specific hardware gpio: mb86s7x: use builtin_platform_driver gpio: etraxfs: use builtin_platform_driver ...
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation update from Jonathan Corbet: "These are the documentation changes for 4.10. It's another busy cycle for the docs tree, as the sphinx conversion continues. Highlights include: - Further work on PDF output, which remains a bit of a pain but should be more solid now. - Five more DocBook template files converted to Sphinx. Only 27 to go... Lots of plain-text files have also been converted and integrated. - Images in binary formats have been replaced with more source-friendly versions. - Various bits of organizational work, including the renaming of various files discussed at the kernel summit. - New documentation for the device_link mechanism. ... and, of course, lots of typo fixes and small updates" * tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits) dma-buf: Extract dma-buf.rst Update Documentation/00-INDEX docs: 00-INDEX: document directories/files with no docs docs: 00-INDEX: remove non-existing entries docs: 00-INDEX: add missing entries for documentation files/dirs docs: 00-INDEX: consolidate process/ and admin-guide/ description scripts: add a script to check if Documentation/00-INDEX is sane Docs: change sh -> awk in REPORTING-BUGS Documentation/core-api/device_link: Add initial documentation core-api: remove an unexpected unident ppc/idle: Add documentation for powersave=off Doc: Correct typo, "Introdution" => "Introduction" Documentation/atomic_ops.txt: convert to ReST markup Documentation/local_ops.txt: convert to ReST markup Documentation/assoc_array.txt: convert to ReST markup docs-rst: parse-headers.pl: cleanup the documentation docs-rst: fix media cleandocs target docs-rst: media/Makefile: reorganize the rules docs-rst: media: build SVG from graphviz files docs-rst: replace bayer.png by a SVG image ...
-
Linus Torvalds authored
Merge updates from Andrew Morton: - various misc bits - most of MM (quite a lot of MM material is awaiting the merge of linux-next dependencies) - kasan - printk updates - procfs updates - MAINTAINERS - /lib updates - checkpatch updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (123 commits) init: reduce rootwait polling interval time to 5ms binfmt_elf: use vmalloc() for allocation of vma_filesz checkpatch: don't emit unified-diff error for rename-only patches checkpatch: don't check c99 types like uint8_t under tools checkpatch: avoid multiple line dereferences checkpatch: don't check .pl files, improve absolute path commit log test scripts/checkpatch.pl: fix spelling checkpatch: don't try to get maintained status when --no-tree is given lib/ida: document locking requirements a bit better lib/rbtree.c: fix typo in comment of ____rb_erase_color lib/Kconfig.debug: make CONFIG_STRICT_DEVMEM depend on CONFIG_DEVMEM MAINTAINERS: add drm and drm/i915 irc channels MAINTAINERS: add "C:" for URI for chat where developers hang out MAINTAINERS: add drm and drm/i915 bug filing info MAINTAINERS: add "B:" for URI where to file bugs get_maintainer: look for arbitrary letter prefixes in sections printk: add Kconfig option to set default console loglevel printk/sound: handle more message headers printk/btrfs: handle more message headers printk/kdb: handle more message headers ...
-
Joe Perches authored
.c and .h source files should not be executable, change the permissions to 0644. [ This would normally go through Andrew Morton, but his ancient patch-based toolchain doesn't do permission changes ] Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "The irq department provides: - a major update to the auto affinity management code, which is used by multi-queue devices - move of the microblaze irq chip driver into the common driver code so it can be shared between microblaze, powerpc and MIPS - a series of updates to the ARM GICV3 interrupt controller - the usual pile of fixes and small improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) powerpc/virtex: Use generic xilinx irqchip driver irqchip/xilinx: Try to fall back if xlnx,kind-of-intr not provided irqchip/xilinx: Add support for parent intc irqchip/xilinx: Rename get_irq to xintc_get_irq irqchip/xilinx: Restructure and use jump label api irqchip/xilinx: Clean up print messages microblaze/irqchip: Move intc driver to irqchip ARM: virt: Select ARM_GIC_V3_ITS ARM: gic-v3-its: Add 32bit support to GICv3 ITS irqchip/gic-v3-its: Specialise readq and writeq accesses irqchip/gic-v3-its: Specialise flush_dcache operation irqchip/gic-v3-its: Narrow down Entry Size when used as a divider irqchip/gic-v3-its: Change unsigned types for AArch32 compatibility irqchip/gic-v3: Use nops macro for Cavium ThunderX erratum 23154 irqchip/gic-v3: Convert arm64 GIC accessors to {read,write}_sysreg_s genirq/msi: Drop artificial PCI dependency irqchip/bcm7038-l1: Implement irq_cpu_offline() callback genirq/affinity: Use default affinity mask for reserved vectors genirq/affinity: Take reserved vectors into account when spreading irqs PCI: Remove the irq_affinity mask from struct pci_dev ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "The time/timekeeping/timer folks deliver with this update: - Fix a reintroduced signed/unsigned issue and cleanup the whole signed/unsigned mess in the timekeeping core so this wont happen accidentaly again. - Add a new trace clock based on boot time - Prevent injection of random sleep times when PM tracing abuses the RTC for storage - Make posix timers configurable for real tiny systems - Add tracepoints for the alarm timer subsystem so timer based suspend wakeups can be instrumented - The usual pile of fixes and updates to core and drivers" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) timekeeping: Use mul_u64_u32_shr() instead of open coding it timekeeping: Get rid of pointless typecasts timekeeping: Make the conversion call chain consistently unsigned timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion alarmtimer: Add tracepoints for alarm timers trace: Update documentation for mono, mono_raw and boot clock trace: Add an option for boot clock as trace clock timekeeping: Add a fast and NMI safe boot clock timekeeping/clocksource_cyc2ns: Document intended range limitation timekeeping: Ignore the bogus sleep time if pm_trace is enabled selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous" clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map() arm64: dts: rockchip: Arch counter doesn't tick in system suspend clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend posix-timers: Make them configurable posix_cpu_timers: Move the add_device_randomness() call to a proper place timer: Move sys_alarm from timer.c to itimer.c ptp_clock: Allow for it to be optional Kconfig: Regenerate *.c_shipped files after previous changes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull smp hotplug updates from Thomas Gleixner: "This is the final round of converting the notifier mess to the state machine. The removal of the notifiers and the related infrastructure will happen around rc1, as there are conversions outstanding in other trees. The whole exercise removed about 2000 lines of code in total and in course of the conversion several dozen bugs got fixed. The new mechanism allows to test almost every hotplug step standalone, so usage sites can exercise all transitions extensively. There is more room for improvement, like integrating all the pointlessly different architecture mechanisms of synchronizing, setting cpus online etc into the core code" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) tracing/rb: Init the CPU mask on allocation soc/fsl/qbman: Convert to hotplug state machine soc/fsl/qbman: Convert to hotplug state machine zram: Convert to hotplug state machine KVM/PPC/Book3S HV: Convert to hotplug state machine arm64/cpuinfo: Convert to hotplug state machine arm64/cpuinfo: Make hotplug notifier symmetric mm/compaction: Convert to hotplug state machine iommu/vt-d: Convert to hotplug state machine mm/zswap: Convert pool to hotplug state machine mm/zswap: Convert dst-mem to hotplug state machine mm/zsmalloc: Convert to hotplug state machine mm/vmstat: Convert to hotplug state machine mm/vmstat: Avoid on each online CPU loops mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead() tracing/rb: Convert to hotplug state machine oprofile/nmi timer: Convert to hotplug state machine net/iucv: Use explicit clean up labels in iucv_init() x86/pci/amd-bus: Convert to hotplug state machine x86/oprofile/nmi: Convert to hotplug state machine ...
-
Lukasz Majewski authored
Since I leave Samsung, I would like to step down from maintenance duties. Bartek Zolnierkiewicz will replace. Signed-off-by:
Lukasz Majewski <l.majewski@samsung.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Zhang Rui <rui.zhang@intel.com>
-
Jungseung Lee authored
For several devices, the rootwait time is sensitive because it directly affects booting time. The polling interval of rootwait is currently 100ms. To save unnessesary waiting time, reduce the polling interval to 5 ms. [akpm@linux-foundation.org: remove used-once #define] Link: http://lkml.kernel.org/r/20161207060743.1728-1-js07.lee@samsung.comSigned-off-by:
Jungseung Lee <js07.lee@samsung.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jason Baron authored
We have observed page allocations failures of order 4 during core dump while trying to allocate vma_filesz. This results in a useless core file of size 0. To improve reliability use vmalloc(). Note that the vmalloc() allocation is bounded by sysctl_max_map_count, which is 65,530 by default. So with a 4k page size, and 8 bytes per seg, this is a max of 128 pages or an order 7 allocation. Other parts of the core dump path, such as fill_files_note() are already using vmalloc() for presumably similar reasons. Link: http://lkml.kernel.org/r/1479745791-17611-1-git-send-email-jbaron@akamai.comSigned-off-by:
Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Jeffery authored
I generated a patch with `git format-patch` which checkpatch thinks is invalid: $ ./scripts/checkpatch.pl lpc-dt/0006-mfd-dt-Move-syscon-bindings-to-syscon-subdirectory.patch WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? Documentation/devicetree/bindings/mfd/{ => syscon}/aspeed-scu.txt | 0 ERROR: Does not appear to be a unified-diff format patch total: 1 errors, 1 warnings, 0 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. lpc-dt/0006-mfd-dt-Move-syscon-bindings-to-syscon-subdirectory.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. The patch in question was all renames with no edits, giving 100% similarity and thus no diff markers. Set '$is_patch = 1;' in the add/remove/rename detection to avoid generating spurious warnings. Link: http://lkml.kernel.org/r/20161205232224.22685-1-andrew@aj.id.auSigned-off-by:
Andrew Jeffery <andrew@aj.id.au> Acked-by:
Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tomas Winkler authored
Tools contains user space code so uintX_t types are just fine. Link: http://lkml.kernel.org/r/1479286379-853-1-git-send-email-tomas.winkler@intel.comSigned-off-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Code that puts a single dereferencing identifier on multiple lines like: struct_identifier->member[index]. member = <foo>; is generally hard to follow. Prefer that dereferencing identifiers be single line. Link: http://lkml.kernel.org/r/e9c191ae3f41bedc8ffd5c0fbcc5a1cec1d1d2df.1478120869.git.joe@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
perl files (*.pl) are mostly inappropriate to check coding styles so exempt them from long line checks and various .[ch] file type tests. And as well, only scan absolute paths in the commit log, not in the patch. Link: http://lkml.kernel.org/r/85b101d50acafe6c0261d9f7df283c827da52c4a.1477340110.git.joe@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
s/preceeded/preceded/ Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jerome Forissier authored
Fixes the following warning: Use of uninitialized value $root in concatenation (.) or string at /path/to/checkpatch.pl line 764. Link: http://lkml.kernel.org/r/1476719709-16668-1-git-send-email-jerome.forissier@linaro.orgSigned-off-by:
Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Vetter authored
I wanted to wrap a bunch of ida_simple_get calls into their own locking, until I dug around and read the original commit message. Stuff like this should imo be added to the kernel doc, let's do that. Link: http://lkml.kernel.org/r/20161027072216.20411-1-daniel.vetter@ffwll.chSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jie Chen authored
In Case 3 of `sibling == parent->rb_right': Right rotation will not change color of sl and S in the diagram (i.e. should not change "sl" to "Sl", "S" to "s") In Case 3 of `sibling == parent->rb_left': (p) (p) / \ / \ S N --> sr N / \ / Sl sr S / Sl This is actually left rotation at "S", not right rotation. In Case 4 of `sibling == parent->rb_left': (p) (s) / \ / \ S N --> Sl P / \ / \ sl (sr) (sr) N This is actually right rotation at "(p)" + color flips, not left rotation + color flips. Link: http://lkml.kernel.org/r/1472391115-3702-1-git-send-email-fykcee1@gmail.comSigned-off-by:
Jie Chen <fykcee1@gmail.com> Cc: Wei Yang <weiyang@linux.vnet.ibm.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Young authored
With CONFIG_DEVMEM not set, CONFIG_STRICT_DEVMEM will be useless even if it is set =y, thus let's update the dependency in Kconfig. Link: http://lkml.kernel.org/r/20161006051217.GA31027@dhcp-128-65.nay.redhat.comSigned-off-by:
Dave Young <dyoung@redhat.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jani Nikula authored
Link: http://lkml.kernel.org/r/1476966135-26943-4-git-send-email-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jani Nikula authored
Make it easier to find the developer chat for the subsystem or driver. Link: http://lkml.kernel.org/r/1476966135-26943-3-git-send-email-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jani Nikula authored
Link: http://lkml.kernel.org/r/1476966135-26943-2-git-send-email-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jani Nikula authored
Different subsystems and drivers have different preferences for where to file bugs and what information to include. Add "B:" entry for specifying the URI for the bug tracker directly, a web page for detailed info on filing bugs, or a mailto: URI. Link: http://lkml.kernel.org/r/1476966135-26943-1-git-send-email-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Jani Nikula proposes patches to add a few new letter prefixes for "B:" bug reporting and "C:" maintainer chatting to the various sections of MAINTAINERS. Add a generic mechanism to get_maintainer.pl to find sections that have any combination of "[A-Z]" letter prefix types in a section. Link: http://lkml.kernel.org/r/1477332323.1984.8.camel@perches.comSigned-off-by:
Joe Perches <joe@perches.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Olof Johansson authored
Add a configuration option to set the default console loglevel. This is, as before, still possible to override at runtime through bootargs (loglevel=<x>), sysrq and /proc/printk. There are cases where adding additional arguments on the commandline is impractical, and changing the default for the kernel when being built makes more sense. Provide such a method here, for those who choose to do so. Also, while touching this code, clarify the difference between MESSAGE_LOGLEVEL_DEFAULT and CONSOLE_LOGLEVEL_DEFAULT. Link: http://lkml.kernel.org/r/1479676829-30031-1-git-send-email-olof@lixom.netSigned-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Petr Mladek authored
Commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") allows to define more message headers for a single message. The motivation is that continuous lines might get mixed. Therefore it make sense to define the right log level for every piece of a cont line. This patch allows to copy only the real message level. We should ignore KERN_CONT because <filename:line> is added for each message. By other words, we want to know where each piece of the line comes from. [pmladek@suse.com: fix a check of the valid message level] Link: http://lkml.kernel.org/r/20161111183444.GE2145@dhcp128.suse.cz Link: http://lkml.kernel.org/r/1478695291-12169-5-git-send-email-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Cc: Joe Perches <joe@perches.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: David Sterba <dsterba@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Petr Mladek authored
Commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") allows to define more message headers for a single message. The motivation is that continuous lines might get mixed. Therefore it make sense to define the right log level for every piece of a cont line. The current btrfs_printk() macros do not support continuous lines at the moment. But better be prepared for a custom messages and avoid potential "lvl" buffer overflow. This patch iterates over the entire message header. It is interested only into the message level like the original code. This patch also introduces PRINTK_MAX_SINGLE_HEADER_LEN. Three bytes are enough for the message level header at the moment. But it used to be three, see the commit 04d2c8c8 ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"). Also I fixed the default ratelimit level. It looked very strange when it was different from the default log level. [pmladek@suse.com: Fix a check of the valid message level] Link: http://lkml.kernel.org/r/20161111183236.GD2145@dhcp128.suse.cz Link: http://lkml.kernel.org/r/1478695291-12169-4-git-send-email-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Acked-by:
David Sterba <dsterba@suse.com> Cc: Joe Perches <joe@perches.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Petr Mladek authored
Commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") allows to define more message headers for a single message. The motivation is that continuous lines might get mixed. Therefore it make sense to define the right log level for every piece of a cont line. This patch introduces printk_skip_headers() that will skip all headers and uses it in the kdb code instead of printk_skip_level(). This approach helps to fix other printk_skip_level() users independently. Link: http://lkml.kernel.org/r/1478695291-12169-3-git-send-email-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Cc: Joe Perches <joe@perches.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: David Sterba <dsterba@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Petr Mladek authored
Commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") added back KERN_CONT message header. As a result it might appear in the middle of the line when the parts are squashed via the temporary NMI buffer. A reasonable solution seems to be to split the text in the NNI temporary not only by newlines but also by the message headers. Another solution would be to filter out KERN_CONT when writing to the temporary buffer. But this would complicate the lockless handling. Also it would not solve problems with a missing newline that was there even before the KERN_CONT stuff. This patch moves the temporary buffer handling into separate function. I played with it and it seems that using the char pointers make the code easier to read. Also it prints the final newline as a continuous line. Finally, it moves handling of the s->len overflow into the paranoid check. And allows to recover from the disaster. Link: http://lkml.kernel.org/r/1478695291-12169-2-git-send-email-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: David Sterba <dsterba@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Petr Mladek authored
vsnprintf() adds the trailing '\0' but it does not count it into the number of printed characters. The result is that there is one byte less space for the real characters in the buffer. The broken check for the free space might cause that we will repeatedly try to print 1 character into the buffer, never reach the full buffer, and do not count the messages as missed. Also vsnprintf() returns the number of characters that would be printed if the buffer was big enough. As a result, s->len might be bigger than the size of the buffer[*]. And the printk() function might return bigger len than it really printed. Both problems are fixed by using vscnprintf() instead. Note that I though about increasing the number of missed messages even when the message was shrunken. But it made the code even more complicated. I think that it is not worth it. Shrunken messages are usually easy to recognize. And it should be a corner case. [*] The overflown s->len value is crazy and unexpected. I "made a mistake" and reported this situation as an internal error when fixed handling of PR_CONT headers in some other patch. Link: http://lkml.kernel.org/r/20161208174912.GA17042@linux.suseSigned-off-by:
Petr Mladek <pmladek@suse.com> CcL Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Chris Mason <clm@fb.com> Cc: David Sterba <dsterba@suse.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Joe Perches <joe@perches.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-