- 19 Aug, 2023 13 commits
-
-
Josua Mayer authored
Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC) for active optical cables supporting 25G and 100G speeds. Since the specification makes no statement about transmitter range, and as the specific sfp module that had been tested features only 2m fiber - short-range (SR) modes are selected. The 100G speed is irrelevant because it would require multiple fibers / multiple SFP28 modules combined under one netdev. sfp-bus.c only handles a single module per netdev, so only 25Gbps modes are selected. sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR with compatible properties, however that entry is a contradiction in itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely be a mode for qsfp modules only. Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r interface mode and 25000baseSR link mode. Also enforce SFP28 bitrate limits on the values read from sfp eeprom as requested by Russell King. Tested with fs.com S28-AO02 AOC SFP28 module. Signed-off-by:
Josua Mayer <josua@solid-run.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Serge Semin authored
Based on the original code semantic in case of Clause 45 MDIO, the address command is supposed to be followed by the command sending the MMD address, not the CSR address. The commit 002dd3de ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions") has erroneously broken that. So most likely due to an unfortunate variable name it switched the code to sending the CSR address. In our case it caused the protocol malfunction so the read operation always failed with the turnaround bit always been driven to one by PHY instead of zero. Fix that by getting back the correct behaviour: sending MMD address command right after the regular address command. Fixes: 002dd3de ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions") Signed-off-by:
Serge Semin <fancer.lancer@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Arınç ÜNAL authored
802.1X PAE frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as regular multicast frames, therefore flooding them to user ports. To fix this, set 802.1X PAE frames to be trapped to the CPU port(s). Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Fixes for Spectrum-4 This patchset contains an assortment of fixes for mlxsw Spectrum-4 support. ==================== Link: https://lore.kernel.org/r/cover.1692268427.git.petrm@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Ido Schimmel authored
Remove assumptions about shared buffer cell size and instead query the cell size from devlink. Adjust the test to send small packets that fit inside a single cell. Tested on Spectrum-{1,2,3,4}. Fixes: 47354021 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC") Signed-off-by:Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/f7dfbf3c4d1cb23838d9eb99bab09afaa320c4ca.1692268427.git.petrm@nvidia.comSigned-off-by:
-
Amit Cohen authored
The field 'virtual router' was extended to 12 bits in Spectrum-4. Therefore, the element 'MLXSW_AFK_ELEMENT_VIRT_ROUTER_MSB' needs 3 bits for Spectrum < 4 and 4 bits for Spectrum >= 4. The elements are stored in an internal storage scratchpad. Currently, the MSB is defined there as 3 bits. It means that for Spectrum-4, only 2K VRFs can be used for multicast routing, as the highest bit is not really used by the driver. Fix the definition of 'VIRT_ROUTER_MSB' to use 4 bits. Adjust the definitions of 'virtual router' field in the blocks accordingly - use '_avoid_size_check' for Spectrum-2 instead of for Spectrum-4. Fix the mask in parse function to use 4 bits. Fixes: 6d5d8ebb ("mlxsw: Rename virtual router flex key element") Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
-
Ido Schimmel authored
The two most significant bits of the "local_port" field in the SSPR register are always cleared since they are overwritten by the deprecated and overlapping "sub_port" field. On systems with more than 255 local ports (e.g., Spectrum-4), this results in the firmware maintaining invalid mappings between system port and local port. Specifically, two different systems ports (0x1 and 0x101) point to the same local port (0x1), which eventually leads to firmware errors. Fix by removing the deprecated "sub_port" field. Fixes: fd24b29a ("mlxsw: reg: Align existing registers to use extended local_port field") Signed-off-by:
-
Danielle Ratson authored
Currently, in Spectrum-2 and above, time stamps are extracted from the CQE into the time stamp fields in 'struct mlxsw_skb_cb', only when the CQE time stamp type is UTC. The time stamps are read directly from the CQE and software can get the time stamp in UTC format using CQEv2. From Spectrum-4, the time stamps that are read from the CQE are allowed to be also from MIRROR_UTC type. Therefore, we get a warning [1] from the driver that the time stamp fields were not set, when LLDP control packet is sent. Allow the time stamp type to be MIRROR_UTC and set the time stamp in this case as well. [1] WARNING: CPU: 11 PID: 0 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1409 mlxsw_sp2_ptp_hwtstamp_fill+0x1f/0x70 [mlxsw_spectrum] [...] Call Trace: <IRQ> mlxsw_sp2_ptp_receive+0x3c/0x80 [mlxsw_spectrum] mlxsw_core_skb_receive+0x119/0x190 [mlxsw_core] mlxsw_pci_cq_tasklet+0x3c9/0x780 [mlxsw_pci] tasklet_action_common.constprop.0+0x9f/0x110 __do_softirq+0xbb/0x296 irq_exit_rcu+0x79/0xa0 common_interrupt+0x86/0xa0 </IRQ> <TASK> Fixes: 47354021 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC") Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
-
Lu Wei authored
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with L3S mode and ipvlan2 with L2 mode are created based on them as figure (1). In this case, ipvlan_register_nf_hook() will be called to register nf hook which is needed by ipvlans in L3S mode in ns1 and value of ipvl_nf_hook_refcnt is set to 1. (1) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) veth3--ipvlan2 (L2) (2) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) ipvlan2 (L2) veth3 | | |------->-------->--------->-------- migrate When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event: dev_change_net_namespace call_netdevice_notifiers ipvlan_device_event ipvlan_migrate_l3s_hook ipvlan_register_nf_hook(newnet) (I) ipvlan_unregister_nf_hook(oldnet) (II) In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0 since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to register nf_hook in ns2 and unregister nf_hook in ns1. As a result, ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2 is increased incorrectly. When the second net namespace is removed, a reference count leak warning in ipvlan_ns_exit() will be triggered. This patch add a check before ipvlan_migrate_l3s_hook() is called. The warning can be triggered as follows: $ ip netns add ns1 $ ip netns add ns2 $ ip netns exec ns1 ip link add veth1 type veth peer name veth2 $ ip netns exec ns1 ip link add veth3 type veth peer name veth4 $ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s $ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2 $ ip netns exec ns1 ip link set veth3 netns ns2 $ ip net del ns2 Fixes: 3133822f ("ipvlan: use pernet operations and restrict l3s hooks to master netns") Signed-off-by:Lu Wei <luwei32@huawei.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.comSigned-off-by:
-
Eric Dumazet authored
We changed tcp_poll() over time, bug never updated dccp. Note that we also could remove dccp instead of maintaining it. Fixes: 7c657876 ("[DCCP]: Initial implementation") Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230818015820.2701595-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
*prot->memory_pressure is read/writen locklessly, we need to add proper annotations. A recent commit added a new race, it is time to audit all accesses. Fixes: 2d0c88e8 ("sock: Fix misuse of sk_under_memory_pressure()") Fixes: 4d93df0a ("[SCTP]: Rewrite of sctp buffer management code") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Link: https://lore.kernel.org/r/20230818015132.2699348-1-edumazet@google.comSigned-off-by:
-
Vladimir Oltean authored
The blamed commit resolved a bug where frames would still get stuck at egress, even though they're smaller than the maxSDU[tc], because the driver did not take into account the extra 33 ns that the queue system needs for scheduling the frame. It now takes that into account, but the arithmetic that we perform in vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on 64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS may become a very large integer if gate_len_ns < 33 ns. In practice, this means that we've introduced a regression where all traffic class gates which are permanently closed will not get detected by the driver, and we won't enable oversize frame dropping for them. Before: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS After: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS Fixes: 11afdc65 ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Jiri Pirko authored
Cited fixes commit introduced linecard notifications for register, however it didn't add them for unregister. Fix that by adding them. Fixes: c246f9b5 ("devlink: add support to create line card and expose to user") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
-
- 18 Aug, 2023 4 commits
-
-
Hariprasad Kelam authored
On SDP interfaces, frame oversize and undersize errors are observed as driver is not considering packet sizes of all subscribers of the link before updating the link config. This patch fixes the same. Fixes: 9b7dd87a ("octeontx2-af: Support to modify min/max allowed packet lengths") Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230817063006.10366-1-hkelam@marvell.comSigned-off-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Fix issues with adjusted MTUs (2 patches), by Sven Eckelmann - Fix header access for memory reallocation case, by Remi Pommarel - Fix two memory leaks (2 patches), by Remi Pommarel * tag 'batadv-net-pullrequest-20230816' of git://git.open-mesh.org/linux-merge: batman-adv: Fix batadv_v_ogm_aggr_send memory leak batman-adv: Fix TT global entry leak when client roamed back batman-adv: Do not get eth header before batadv_check_management_packet batman-adv: Don't increase MTU when set by user batman-adv: Trigger events for auto adjusted MTU ==================== Link: https://lore.kernel.org/r/20230816163318.189996-1-sw@simonwunderlich.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter. No known outstanding regressions. Fixes to fixes: - virtio-net: set queues after driver_ok, avoid a potential race added by recent fix - Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning when VLAN 0 is registered explicitly - nf_tables: - fix false-positive lockdep splat in recent fixes - don't fail inserts if duplicate has expired (fix test failures) - fix races between garbage collection and netns dismantle Current release - new code bugs: - mlx5: Fix mlx5_cmd_update_root_ft() error flow Previous releases - regressions: - phy: fix IRQ-based wake-on-lan over hibernate / power off Previous releases - always broken: - sock: fix misuse of sk_under_memory_pressure() preventing system from exiting global TCP memory pressure if a single cgroup is under pressure - fix the RTO timer retransmitting skb every 1ms if linear option is enabled - af_key: fix sadb_x_filter validation, amment netlink policy - ipsec: fix slab-use-after-free in decode_session6() - macb: in ZynqMP resume always configure PS GTR for non-wakeup source Misc: - netfilter: set default timeout to 3 secs for sctp shutdown send and recv state (from 300ms), align with protocol timers" * tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) ice: Block switchdev mode when ADQ is active and vice versa qede: fix firmware halt over suspend and resume net: do not allow gso_size to be set to GSO_BY_FRAGS sock: Fix misuse of sk_under_memory_pressure() sfc: don't fail probe if MAE/TC setup fails sfc: don't unregister flow_indr if it was never registered net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset net/mlx5: Fix mlx5_cmd_update_root_ft() error flow net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT i40e: fix misleading debug logs iavf: fix FDIR rule fields masks validation ipv6: fix indentation of a config attribute mailmap: add entries for Simon Horman broadcom: b44: Use b44_writephy() return value net: openvswitch: reject negative ifindex team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves net: phy: broadcom: stub c45 read/write for 54810 netfilter: nft_dynset: disallow object maps netfilter: nf_tables: GC transaction race with netns dismantle netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path ... -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular enough week, mostly the usual amdgpu and i915 fixes. Also qaic, nouveau, qxl and a revert for an EDID patch that had some side effects, along with a couple of panel fixes. edid: - revert mode parsing fix that had side effects. i915: - Fix the flow for ignoring GuC SLPC efficient frequency selection - Fix SDVO panel_type initialization - Fix display probe for IVB Q and IVB D GT2 server nouveau: - fix use-after-free in connector code qaic: - integer overflow check fix - fix slicing memory leak panel: - fix JDI LT070ME05000 probing - fix AUO G121EAN01 timings amdgpu: - SMU 13.x fixes - Fix mcbp parameter for gfx9 - SMU 11.x fixes - Temporary fix for large numbers of XCP partitions - S0ix fixes - DCN 2.0 fix qxl: - fix use after free race in dumb object allocation" * tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm: drm/qxl: fix UAF on handle creation Revert "drm/edid: Fix csync detailed mode parsing" drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: skip xcp drm device allocation when out of drm resource drm/amd/pm: Update pci link width for smu v13.0.6 drm/amd/pm: Fix temperature unit of SMU v13.0.6 drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7 drm/amdgpu: disable mcbp if parameter zero is set drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0 accel/qaic: Clean up integer overflow checking in map_user_pages() accel/qaic: Fix slicing memory leak drm/i915: fix display probe for IVB Q and IVB D GT2 server drm/i915/sdvo: fix panel_type initialization drm/i915/guc/slpc: Restore efficient freq earlier drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs drm/panel: JDI LT070ME05000 simplify with dev_err_probe()
-
- 17 Aug, 2023 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e) This series contains updates to iavf and i40e drivers. Piotr adds checks for unsupported Flow Director rules on iavf. Andrii replaces incorrect 'write' messaging on read operations for i40e. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix misleading debug logs iavf: fix FDIR rule fields masks validation ==================== Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Wander Lairson Costa authored
qxl_mode_dumb_create() dereferences the qobj returned by qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. A potential attacker could guess the returned handle value and closes it between the return of qxl_gem_object_create_with_handle() and the qobj usage, triggering a use-after-free scenario. Reproducer: int dri_fd =-1; struct drm_mode_create_dumb arg = {0}; void gem_close(int handle); void* trigger(void* ptr) { int ret; arg.width = arg.height = 0x20; arg.bpp = 32; ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg); if(ret) { perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed"); exit(-1); } gem_close(arg.handle); while(1) { struct drm_mode_create_dumb args = {0}; args.width = args.height = 0x20; args.bpp = 32; ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &args); if (ret) { perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed"); exit(-1); } printf("[*] DRM_IOCTL_MODE_CREATE_DUMB created, %d\n", args.handle); gem_close(args.handle); } return NULL; } void gem_close(int handle) { struct drm_gem_close args; args.handle = handle; int ret = ioctl(dri_fd, DRM_IOCTL_GEM_CLOSE, &args); // gem close handle if (!ret) printf("gem close handle %d\n", args.handle); } int main(void) { dri_fd= open("/dev/dri/card0", O_RDWR); printf("fd:%d\n", dri_fd); if(dri_fd == -1) return -1; pthread_t tid1; if(pthread_create(&tid1,NULL,trigger,NULL)){ perror("[*] thread_create tid1\n"); return -1; } while (1) { gem_close(arg.handle); } return 0; } This is a KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69 Write of size 1 at addr ffff88801136c240 by task poc/515 CPU: 1 PID: 515 Comm: poc Not tainted 6.3.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014 Call Trace: <TASK> __dump_stack linux/lib/dump_stack.c:88 dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106 print_address_description linux/mm/kasan/report.c:319 print_report+0xd2/0x660 linux/mm/kasan/report.c:430 kasan_report+0xd2/0x110 linux/mm/kasan/report.c:536 __asan_report_store1_noabort+0x17/0x30 linux/mm/kasan/report_generic.c:383 qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69 drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96 drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102 drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl linux/fs/ioctl.c:51 __do_sys_ioctl linux/fs/ioctl.c:870 __se_sys_ioctl linux/fs/ioctl.c:856 __x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856 do_syscall_x64 linux/arch/x86/entry/common.c:50 do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120 RIP: 0033:0x7ff5004ff5f7 Code: 00 00 00 48 8b 05 99 c8 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 69 c8 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ff500408ea8 EFLAGS: 00000286 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5004ff5f7 RDX: 00007ff500408ec0 RSI: 00000000c02064b2 RDI: 0000000000000003 RBP: 00007ff500408ef0 R08: 0000000000000000 R09: 000000000000002a R10: 0000000000000000 R11: 0000000000000286 R12: 00007fff1c6cdafe R13: 00007fff1c6cdaff R14: 00007ff500408fc0 R15: 0000000000802000 </TASK> Allocated by task 515: kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45 kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52 kasan_save_alloc_info+0x1e/0x40 linux/mm/kasan/generic.c:510 ____kasan_kmalloc linux/mm/kasan/common.c:374 __kasan_kmalloc+0xc3/0xd0 linux/mm/kasan/common.c:383 kasan_kmalloc linux/./include/linux/kasan.h:196 kmalloc_trace+0x48/0xc0 linux/mm/slab_common.c:1066 kmalloc linux/./include/linux/slab.h:580 kzalloc linux/./include/linux/slab.h:720 qxl_bo_create+0x11a/0x610 linux/drivers/gpu/drm/qxl/qxl_object.c:124 qxl_gem_object_create+0xd9/0x360 linux/drivers/gpu/drm/qxl/qxl_gem.c:58 qxl_gem_object_create_with_handle+0xa1/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:89 qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63 drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96 drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102 drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl linux/fs/ioctl.c:51 __do_sys_ioctl linux/fs/ioctl.c:870 __se_sys_ioctl linux/fs/ioctl.c:856 __x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856 do_syscall_x64 linux/arch/x86/entry/common.c:50 do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120 Freed by task 515: kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45 kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52 kasan_save_free_info+0x2e/0x60 linux/mm/kasan/generic.c:521 ____kasan_slab_free linux/mm/kasan/common.c:236 ____kasan_slab_free+0x180/0x1f0 linux/mm/kasan/common.c:200 __kasan_slab_free+0x12/0x30 linux/mm/kasan/common.c:244 kasan_slab_free linux/./include/linux/kasan.h:162 slab_free_hook linux/mm/slub.c:1781 slab_free_freelist_hook+0xd2/0x1a0 linux/mm/slub.c:1807 slab_free linux/mm/slub.c:3787 __kmem_cache_free+0x196/0x2d0 linux/mm/slub.c:3800 kfree+0x78/0x120 linux/mm/slab_common.c:1019 qxl_ttm_bo_destroy+0x140/0x1a0 linux/drivers/gpu/drm/qxl/qxl_object.c:49 ttm_bo_release+0x678/0xa30 linux/drivers/gpu/drm/ttm/ttm_bo.c:381 kref_put linux/./include/linux/kref.h:65 ttm_bo_put+0x50/0x80 linux/drivers/gpu/drm/ttm/ttm_bo.c:393 qxl_gem_object_free+0x3e/0x60 linux/drivers/gpu/drm/qxl/qxl_gem.c:42 drm_gem_object_free+0x5c/0x90 linux/drivers/gpu/drm/drm_gem.c:974 kref_put linux/./include/linux/kref.h:65 __drm_gem_object_put linux/./include/drm/drm_gem.h:431 drm_gem_object_put linux/./include/drm/drm_gem.h:444 qxl_gem_object_create_with_handle+0x151/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:100 qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63 drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96 drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102 drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl linux/fs/ioctl.c:51 __do_sys_ioctl linux/fs/ioctl.c:870 __se_sys_ioctl linux/fs/ioctl.c:856 __x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856 do_syscall_x64 linux/arch/x86/entry/common.c:50 do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120 The buggy address belongs to the object at ffff88801136c000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 576 bytes inside of freed 1024-byte region [ffff88801136c000, ffff88801136c400) The buggy address belongs to the physical page: page:0000000089fc329b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11368 head:0000000089fc329b order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0010200 ffff888007841dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801136c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801136c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88801136c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801136c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801136c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Instead of returning a weak reference to the qxl_bo object, return the created drm_gem_object and let the caller decrement the reference count when it no longer needs it. As a convenience, if the caller is not interested in the gobj object, it can pass NULL to the parameter and the reference counting is descremented internally. The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940). Link: https://www.zerodayinitiative.com/Signed-off-by:Wander Lairson Costa <wander@redhat.com> Cc: stable@vger.kernel.org Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.5-2023-08-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.5-2023-08-16: amdgpu: - SMU 13.x fixes - Fix mcbp parameter for gfx9 - SMU 11.x fixes - Temporary fix for large numbers of XCP partitions - S0ix fixes - DCN 2.0 fix Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for the qaic accel, a use-after-free fix for nouveau and a revert for an alleged fix in EDID parsing. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix the flow for ignoring GuC SLPC efficient frequency selection (Vinay) - Fix SDVO panel_type initialization (Jani) - Fix display probe for IVB Q and IVB D GT2 server (Jani) Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-08-16 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix mlx5_cmd_update_root_ft() error flow net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT ==================== Link: https://lore.kernel.org/r/20230816204108.53819-1-saeed@kernel.orgSigned-off-by:
-
Marcin Szycik authored
ADQ and switchdev are not supported simultaneously. Enabling both at the same time can result in nullptr dereference. To prevent this, check if ADQ is active when changing devlink mode to switchdev mode, and check if switchdev is active when enabling ADQ. Fixes: fbc7b27a ("ice: enable ndo_setup_tc support for mqprio_qdisc") Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
-
Manish Chopra authored
While performing certain power-off sequences, PCI drivers are called to suspend and resume their underlying devices through PCI PM (power management) interface. However this NIC hardware does not support PCI PM suspend/resume operations so system wide suspend/resume leads to bad MFW (management firmware) state which causes various follow-up errors in driver when communicating with the device/firmware afterwards. To fix this driver implements PCI PM suspend handler to indicate unsupported operation to the PCI subsystem explicitly, thus avoiding system to go into suspended/standby mode. Without this fix device/firmware does not recover unless system is power cycled. Fixes: 2950219d ("qede: Add basic network device support") Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Alok Prasad <palok@marvell.com> Reviewed-by:
John Meneghini <jmeneghi@redhat.com> Reviewed-by:
-
Eric Dumazet authored
One missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again [1] Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff), because this magic value is used by the kernel. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500 Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01 RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000 RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070 RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6 R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625 __dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:727 [inline] sock_sendmsg+0xd9/0x180 net/socket.c:750 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2496 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2550 __sys_sendmsg+0x117/0x1e0 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ff27cdb34d9 Fixes: 3953c46c ("sk_buff: allow segmenting based on frag sizes") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.comSigned-off-by:
-
Abel Wu authored
The status of global socket memory pressure is updated when: a) __sk_mem_raise_allocated(): enter: sk_memory_allocated(sk) > sysctl_mem[1] leave: sk_memory_allocated(sk) <= sysctl_mem[0] b) __sk_mem_reduce_allocated(): leave: sk_under_memory_pressure(sk) && sk_memory_allocated(sk) < sysctl_mem[0] So the conditions of leaving global pressure are inconstant, which may lead to the situation that one pressured net-memcg prevents the global pressure from being cleared when there is indeed no global pressure, thus the global constrains are still in effect unexpectedly on the other sockets. This patch fixes this by ignoring the net-memcg's pressure when deciding whether should leave global memory pressure. Fixes: e1aab161 ("socket: initial cgroup code.") Signed-off-by:
Abel Wu <wuyun.abel@bytedance.com> Acked-by:
-
Edward Cree authored
Existing comment in the source explains why we don't want efx_init_tc() failure to be fatal. Cited commit erroneously consolidated failure paths causing the probe to be failed in this case. Fixes: 7e056e23 ("sfc: obtain device mac address based on firmware handle for ef100") Reviewed-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.comSigned-off-by:
-
Edward Cree authored
In efx_init_tc(), move the setting of efx->tc->up after the flow_indr_dev_register() call, so that if it fails, efx_fini_tc() won't call flow_indr_dev_unregister(). Fixes: 5b2e12d5 ("sfc: bind indirect blocks for TC offload on EF100") Suggested-by:
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fix from Chuck Lever: - Fix new MSG_SPLICE_PAGES support in server's TCP sendmsg helper * tag 'nfsd-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: sunrpc: set the bv_offset of first bvec in svc_tcp_sendmsg
-
Jani Nikula authored
This reverts commit ca62297b. Commit ca62297b ("drm/edid: Fix csync detailed mode parsing") fixed EDID detailed mode sync parsing. Unfortunately, there are quite a few displays out there that have bogus (zero) sync field that are broken by the change. Zero means analog composite sync, which is not right for digital displays, and the modes get rejected. Regardless, it used to work, and it needs to continue to work. Revert the change. Rejecting modes with analog composite sync was the part that fixed the gitlab issue 8146 [1]. We'll need to get back to the drawing board with that. [1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044 Fixes: ca62297b ("drm/edid: Fix csync detailed mode parsing") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.4+ Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com
-
Alfred Lee authored
If the switch is reset during active EEPROM transactions, as in just after an SoC reset after power up, the I2C bus transaction may be cut short leaving the EEPROM internal I2C state machine in the wrong state. When the switch is reset again, the bad state machine state may result in data being read from the wrong memory location causing the switch to enter unexpected mode rendering it inoperational. Fixes: a3dcb3e7 ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset") Signed-off-by:
Alfred Lee <l00g33k@gmail.com> Reviewed-by:
-
- 16 Aug, 2023 8 commits
-
-
Karol Herbst authored
We can't simply free the connector after calling drm_connector_init on it. We need to clean up the drm side first. It might not fix all regressions from commit 2b5d1c29 ("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"), but at least it fixes a memory corruption in error handling related to that commit. Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/ Fixes: 95983aea ("drm/nouveau/disp: add connector class") Signed-off-by:
Karol Herbst <kherbst@redhat.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com
-
Shay Drory authored
The cited patch change mlx5_cmd_update_root_ft() to work with multiple peer devices. However, it didn't align the error flow as well. Hence, Fix the error code to work with multiple peer devices. Fixes: 222dd185 ("{net/RDMA}/mlx5: introduce lag_for_each_peer") Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Dragos Tatulea authored
Before this fix, running high rate traffic through XDP_REDIRECT with multibuf could overrun the fifo used to release the xdp frames after tx completion. This resulted in corrupted data being consumed on the free side. The culplirt was a miscalculation of the fifo size: the maximum ratio between fifo entries / data segments was incorrect. This ratio serves to calculate the max fifo size for a full sq where each packet uses the worst case number of entries in the fifo. This patch fixes the formula and names the constant. It also makes sure that future values will use a power of 2 number of entries for the fifo mask to work. Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Fixes: 3f734b8c ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo") Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Alex Deucher authored
This reverts commit 27dd79c0. It appears MPC_SPLIT_DYNAMIC still causes problems with multiple displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP. This increases power usage with multiple displays, but avoids hangs. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475 Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.4.x
-
Mario Limonciello authored
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity is happening during entry. This is because GFXOFF was scheduled as delayed but RLC gets disabled in s2idle entry sequence which will hang GFX IP if not already in GFXOFF. To help this problem, flush any delayed work for GFXOFF early in s2idle entry sequence to ensure that it's off when RLC is changed. commit 4b31b92b ("drm/amdgpu: complete gfxoff allow signal during suspend without delay") modified power gating flow so that if called in s0ix that it ensured that GFXOFF wasn't put in work queue but instead processed immediately. This is dead code due to commit 10cb67eb ("drm/amdgpu: skip CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly called as part of the suspend entry code. Remove that dead code. Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Tim Huang authored
GFX v11.0.1 reported fence fallback timer expired issue on SDMA and GFX rings after S0ix resume. This is generated by EOP interrupts are disabled when S0ix suspend but fails to re-enable when resume because of the GFX is in GFXOFF. [ 203.349571] [drm] Fence fallback timer expired on ring sdma0 [ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0 [ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0 For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers to configure the fence driver interrupts for rings that belong to GFX. The interrupts configuration will be restored by GFXOFF exit. Signed-off-by:
-
James Zhu authored
Return 0 when drm device alloc failed with -ENOSPC in order to allow amdgpu drive loading. But the xcp without drm device node assigned won't be visiable in user space. This helps amdgpu driver loading on system which has more than 64 nodes, the current limitation. The proposal to add more drm nodes is discussed in public, which will support up to 2^20 nodes totally. kernel drm: https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/ libdrm: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305Signed-off-by:
James Zhu <James.Zhu@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Asad Kamal authored
Update addresses of PCIE link width registers, & link width format used to populate gpu metrics table for smu v13.0.6 v2: Removed ESM register update v3: Updated patch subject and message Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Reviewed-by:
-
