- 13 Mar, 2018 40 commits
-
-
Pavel Tatashin authored
BugLink: http://bugs.launchpad.net/bugs/1745266 In entry_64.S we have code like this: /* Unconditionally use kernel CR3 for do_nmi() */ /* %rax is saved above, so OK to clobber here */ ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER /* If PCID enabled, NOFLUSH now and NOFLUSH on return */ ALTERNATIVE "", "bts $63, %rax", X86_FEATURE_PCID pushq %rax /* mask off "user" bit of pgd address and 12 PCID bits: */ andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax movq %rax, %cr3 2: /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ call do_nmi With this instruction: andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax We unconditionally switch from whatever our CR3 was to kernel page table. But, in arch/x86/platform/efi/efi_64.c We temporarily set a different page table, that does not have the kernel page table with 0x1000 offset from it. Look in efi_thunk() and efi_thunk_set_virtual_address_map(). So, while CR3 points to the other page table, we get an NMI interrupt, and clear 0x1000 from CR3, resulting in a bogus CR3 if the 0x1000 bit was set. The efi page table comes from realmode/rm/trampoline_64.S: arch/x86/realmode/rm/trampoline_64.S 141 .bss 142 .balign PAGE_SIZE 143 GLOBAL(trampoline_pgd) .space PAGE_SIZE Notice: alignment is PAGE_SIZE, so after applying KAISER_SHADOW_PGD_OFFSET which equal to PAGE_SIZE, we can get a different page table. But, even if we fix alignment, here the trampoline binary is later copied into dynamically allocated memory in reserve_real_mode(), so we need to fix that place as well. Fixes: 8a43ddfb ("KAISER: Kernel Address Isolation") Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by:
Steven Sistare <steven.sistare@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1745266 This reverts commit b5213e1e which was commit 46aa6a30 upstream. This is being reverted because the affected commit this was trying to fix, a8ba798b ("selftests: enable O and KBUILD_OUTPUT"), was never backported to the 4.4-stable tree. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Ben Hutchings authored
BugLink: http://bugs.launchpad.net/bugs/1745266 This is a stable-only fix for the backport of commit 5d9b70f7 ("xhci: Don't add a virt_dev to the devs array before it's fully allocated"). In branches that predate commit c5628a2a ("xhci: remove endpoint ring cache") there is an additional failure path in xhci_alloc_virt_device() where ring cache allocation fails, in which case we need to free the ring allocated for endpoint 0. Signed-off-by:
-
Ani Sinha authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 984cf355 upstream. Commit 984d74a7 ("sysrq: rcu-ify __handle_sysrq") replaced spin_lock_irqsave() calls with rcu_read_lock() calls in sysrq. Since rcu_read_lock() does not disable preemption, faulthandler_disabled() in __do_page_fault() in x86/fault.c returns false. When the code later calls might_sleep() in the pagefault handler, we get the following warning: BUG: sleeping function called from invalid context at ../arch/x86/mm/fault.c:1187 in_atomic(): 0, irqs_disabled(): 0, pid: 4706, name: bash Preemption disabled at:[<ffffffff81484339>] printk+0x48/0x4a To fix this, we release the RCU read lock before we crash. Tested this patch on linux 3.18 by booting off one of our boards. Fixes: 984d74a7 ("sysrq: rcu-ify __handle_sysrq") Signed-off-by:
Ani Sinha <ani@arista.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Jiri Slaby authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 1ab87298 upstream. hwrng kthread can be waiting via hwrng_fillfn for some data from a rng like virtio-rng: hwrng D ffff880093e17798 0 382 2 0x00000000 ... Call Trace: [<ffffffff817339c6>] wait_for_completion_killable+0x96/0x210 [<ffffffffa00aa1b7>] virtio_read+0x57/0xf0 [virtio_rng] [<ffffffff814f4a35>] hwrng_fillfn+0x75/0x130 [<ffffffff810aa243>] kthread+0xf3/0x110 And when some user program tries to read the /dev node in this state, we get: rngd D ffff880093e17798 0 762 1 0x00000004 ... Call Trace: [<ffffffff817351ac>] mutex_lock_nested+0x15c/0x3e0 [<ffffffff814f478e>] rng_dev_read+0x6e/0x240 [<ffffffff81231958>] __vfs_read+0x28/0xe0 [<ffffffff81232393>] vfs_read+0x83/0x130 And this is indeed unkillable. So use mutex_lock_interruptible instead of mutex_lock in rng_dev_read and exit immediatelly when interrupted. And possibly return already read data, if any (as POSIX allows). v2: use ERESTARTSYS instead of EINTR Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: <linux-crypto@vger.kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jiri Kosina authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 39380b80 upstream. Currently it's possible for broken (or malicious) userspace to flood a kernel log indefinitely with messages a-la Program dmidecode tried to access /dev/mem between f0000->100000 because range_is_allowed() is case of CONFIG_STRICT_DEVMEM being turned on dumps this information each and every time devmem_is_allowed() fails. Reportedly userspace that is able to trigger contignuous flow of these messages exists. It would be possible to rate limit this message, but that'd have a questionable value; the administrator wouldn't get information about all the failing accessess, so then the information would be both superfluous and incomplete at the same time :) Returning EPERM (which is what is actually happening) is enough indication for userspace what has happened; no need to log this particular error as some sort of special condition. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1607081137020.24757@cbobk.fhfr.pmSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit a9e840a2 upstream. We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: cc28a20e ("introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit b7c6d267 upstream. We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: d0cad871 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit d532c108 upstream. We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: c9b37458 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit d4ca7359 upstream. We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
-
hayeswang authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit cda9fb01 upstream. Replace disable_aldps() and enable_aldps() with aldps_en(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 216a8349 upstream. Replace test_bit() followed by clear_bit() with test_and_clear_bit(). Signed-off-by:
-
hayeswang authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 5ee3c60c upstream. When the autosuspend is enabled and occurs before system suspend, we should wake the device before running system syspend. Then, we could change the wake event for system suspend. Otherwise, the device would resume the system when receiving any packet. Signed-off-by:
-
Ulf Hansson authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 79c5623f upstream. The commit 7d32cdef ("usb: musb: fail with error when no DMA controller set"), caused the core platform driver to correctly return an error code when fail probing. Unfurtante it also caused bug for a NULL pointer dereference, during system suspend for the ux500 driver. The reason is a lacking validation of the corresponding ->driver_data pointer, which won't be set when the musb core driver fails to probe (or haven't yet been probed). Fixes: 7d32cdef ("usb: musb: fail with error when no DMA...") Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Oliver Neukum authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 588afcc1 upstream. This fixes the crash reported in: http://seclists.org/bugtraq/2015/Oct/35 The interface number needs a sanity check. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Davidlohr Bueso authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 1329ce6f upstream. Make use of wake-queues and enable the wakeup to occur after releasing the wait_lock. This is similar to what we do with rtmutex top waiter, slightly shortening the critical region and allow other waiters to acquire the wait_lock sooner. In low contention cases it can also help the recently woken waiter to find the wait_lock available (fastpath) when it continues execution. Reviewed-by:
Waiman Long <Waiman.Long@hpe.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: Jason Low <jason.low2@hp.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Waiman Long <waiman.long@hpe.com> Cc: Will Deacon <Will.Deacon@arm.com> Link: http://lkml.kernel.org/r/20160125022343.GA3322@linux-uzut.siteSigned-off-by:
-
Jianyu Zhan authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 29b75eb2 upstream. Commit e91467ec ("bug in futex unqueue_me") introduced a barrier() in unqueue_me() to prevent the compiler from rereading the lock pointer which might change after a check for NULL. Replace the barrier() with a READ_ONCE() for the following reasons: 1) READ_ONCE() is a weaker form of barrier() that affects only the specific load operation, while barrier() is a general compiler level memory barrier. READ_ONCE() was not available at the time when the barrier was added. 2) Aside of that READ_ONCE() is descriptive and self explainatory while a barrier without comment is not clear to the casual reader. No functional change. [ tglx: Massaged changelog ] Signed-off-by:
Jianyu Zhan <nasa4836@gmail.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Darren Hart <dvhart@linux.intel.com> Cc: dave@stgolabs.net Cc: peterz@infradead.org Cc: linux@rasmusvillemoes.dk Cc: akpm@linux-foundation.org Cc: fengguang.wu@intel.com Cc: bigeasy@linutronix.de Link: http://lkml.kernel.org/r/1457314344-5685-1-git-send-email-nasa4836@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Jeff Layton authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 0752ba80 upstream. We don't clean out OFD locks on close(), so there's no need to check for a race with them here. They'll get cleaned out at the same time that flock locks are. Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Dan Streetman authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit fd5bb66c upstream. Change the zpool/compressor param callback function to release the zswap_pools_lock spinlock before calling param_set_charp, since that function may sleep when it calls kmalloc with GFP_KERNEL. While this problem has existed for a while, I wasn't able to trigger it using a tight loop changing either/both the zpool and compressor params; I think it's very unlikely to be an issue on the stable kernels, especially since most zswap users will change the compressor and/or zpool from sysfs only one time each boot - or zero times, if they add the params to the kernel boot. Fixes: c99b42c3 ("zswap: use charp for zswap param strings") Link: http://lkml.kernel.org/r/20170126155821.4545-1-ddstreet@ieee.orgSigned-off-by:
Dan Streetman <dan.streetman@canonical.com> Reported-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Dan Streetman authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 200867af upstream. Add a work_struct to struct zswap_pool, and change __zswap_pool_empty to use the workqueue instead of using call_rcu(). When zswap destroys a pool no longer in use, it uses call_rcu() to perform the destruction/freeing. Since that executes in softirq context, it must not sleep. However, actually destroying the pool involves freeing the per-cpu compressors (which requires locking the cpu_add_remove_lock mutex) and freeing the zpool, for which the implementation may sleep (e.g. zsmalloc calls kmem_cache_destroy, which locks the slab_mutex). So if either mutex is currently taken, or any other part of the compressor or zpool implementation sleeps, it will result in a BUG(). It's not easy to reproduce this when changing zswap's params normally. In testing with a loaded system, this does not fail: $ cd /sys/module/zswap/parameters $ echo lz4 > compressor ; echo zsmalloc > zpool nor does this: $ while true ; do > echo lzo > compressor ; echo zbud > zpool > sleep 1 > echo lz4 > compressor ; echo zsmalloc > zpool > sleep 1 > done although it's still possible either of those might fail, depending on whether anything else besides zswap has locked the mutexes. However, changing a parameter with no delay immediately causes the schedule while atomic BUG: $ while true ; do > echo lzo > compressor ; echo lz4 > compressor > done This is essentially the same as Yu Zhao's proposed patch to zsmalloc, but moved to zswap, to cover compressor and zpool freeing. Fixes: f1c54846 ("zswap: dynamic pool creation") Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Reported-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
-
Andrey Ryabinin authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit d59b1087 upstream. Calculation of dirty_ratelimit sometimes is not correct. E.g. initial values of dirty_ratelimit == INIT_BW and step == 0, lead to the following result: UBSAN: Undefined behaviour in ../mm/page-writeback.c:1286:7 shift exponent 25600 is too large for 64-bit type 'long unsigned int' The fix is straightforward - make step 0 if the shift exponent is too big. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Joonsoo Kim authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit e1409c32 upstream. pageblock_pfn_to_page() is used to check there is valid pfn and all pages in the pageblock is in a single zone. If there is a hole in the pageblock, passing arbitrary position to pageblock_pfn_to_page() could cause to skip whole pageblock scanning, instead of just skipping the hole page. For deterministic behaviour, it's better to always pass pageblock aligned range to pageblock_pfn_to_page(). It will also help further optimization on pageblock_pfn_to_page() in the following patch. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Acked-by:
-
Joonsoo Kim authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 623446e4 upstream. free_pfn and compact_cached_free_pfn are the pointer that remember restart position of freepage scanner. When they are reset or invalid, we set them to zone_end_pfn because freepage scanner works in reverse direction. But, because zone range is defined as [zone_start_pfn, zone_end_pfn), zone_end_pfn is invalid to access. Therefore, we should not store it to free_pfn and compact_cached_free_pfn. Instead, we need to store zone_end_pfn - 1 to them. There is one more thing we should consider. Freepage scanner scan reversely by pageblock unit. If free_pfn and compact_cached_free_pfn are set to middle of pageblock, it regards that sitiation as that it already scans front part of pageblock so we lose opportunity to scan there. To fix-up, this patch do round_down() to guarantee that reset position will be pageblock aligned. Note that thanks to the current pageblock_pfn_to_page() implementation, actual access to zone_end_pfn doesn't happen until now. But, following patch will change pageblock_pfn_to_page() so this patch is needed from now on. Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Vikas C Sajjan authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 4ee2ec1b upstream. The new function mp_register_ioapic_irq() is a subset of the code in mp_override_legacy_irq(). Replace the code duplication by invoking mp_register_ioapic_irq() from mp_override_legacy_irq(). Signed-off-by:
Vikas C Sajjan <vikas.cha.sajjan@hpe.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Cc: kkamagui@gmail.com Cc: linux-acpi@vger.kernel.org Link: https://lkml.kernel.org/r/1510848825-21965-3-git-send-email-vikas.cha.sajjan@hpe.com Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 898dfe46 upstream. The aloop driver tries to update the hw constraints of the connected target on the cable of the opened PCM substream. This is done by adding the extra hw constraints rules referring to the substream runtime->hw fields, while the other substream may update the runtime hw of another side on the fly. This is, however, racy and may result in the inconsistent values when both PCM streams perform the prepare concurrently. One of the reason is that it overwrites the other's runtime->hw field; which is not only racy but also broken when it's called before the open of another side finishes. And, since the reference to runtime->hw isn't protected, the concurrent write may give the partial value update and become inconsistent. This patch is an attempt to fix and clean up: - The prepare doesn't change the runtime->hw of other side any longer, but only update the cable->hw that is referred commonly. - The extra rules refer to the loopback_pcm object instead of the runtime->hw. The actual hw is deduced from cable->hw. - The extra rules take the cable_lock to protect against the race. Fixes: b1c73fc8 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit b088b53e upstream. The extra hw constraint rule for the formats the aloop driver introduced has a slight flaw, where it doesn't return a positive value when the mask got changed. It came from the fact that it's basically a copy&paste from snd_hw_constraint_mask64(). The original code is supposed to be a single-shot and it modifies the mask bits only once and never after, while what we need for aloop is the dynamic hw rule that limits the mask bits. This difference results in the inconsistent state, as the hw_refine doesn't apply the dependencies fully. The worse and surprisingly result is that it causes a crash in OSS emulation when multiple full-duplex reads/writes are performed concurrently (I leave why it triggers Oops to readers as a homework). For fixing this, replace a few open-codes with the standard snd_mask_*() macros. Reported-by: syzbot+3902b5220e8ca27889ca@syzkaller.appspotmail.com Fixes: b1c73fc8 ("ALSA: snd-aloop: Fix hw_params restrictions and checking") Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 9685347a upstream. The aloop runtime object and its assignment in the cable are left even when opening a substream fails. This doesn't mean any memory leak, but it still keeps the invalid pointer that may be referred by the another side of the cable spontaneously, which is a potential Oops cause. Clean up the cable assignment and the empty cable upon the error path properly. Fixes: 597603d6 ("ALSA: introduce the snd-aloop module for the PCM loopback") Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 900498a3 upstream. PCM OSS read/write loops keep taking the mutex lock for the whole read/write, and this might take very long when the exceptionally high amount of data is given. Also, since it invokes with mutex_lock(), the concurrent read/write becomes unbreakable. This patch tries to address these issues by replacing mutex_lock() with mutex_lock_interruptible(), and also splits / re-takes the lock at each read/write period chunk, so that it can switch the context more finely if requested. Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 29159a4e upstream. The loops for read and write in PCM OSS emulation have no proper check of pending signals, and they keep processing even after user tries to break. This results in a very long delay, often seen as RCU stall when a huge unprocessed bytes remain queued. The bug could be easily triggered by syzkaller. As a simple workaround, this patch adds the proper check of pending signals and aborts the loop appropriately. Reported-by: syzbot+993cb4cfcbbff3947c21@syzkaller.appspotmail.com Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 67089137 upstream. In the OSS emulation plugin builder where the frame size is parsed in the plugin chain, some places miss the possible errors returned from the plugin src_ or dst_frames callback. This patch papers over such places. Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit fe08f34d upstream. syzkaller triggered kernel warnings through PCM OSS emulation at closing a stream: WARNING: CPU: 0 PID: 3502 at sound/core/pcm_lib.c:1635 snd_pcm_hw_param_first+0x289/0x690 sound/core/pcm_lib.c:1635 Call Trace: .... snd_pcm_hw_param_near.constprop.27+0x78d/0x9a0 sound/core/oss/pcm_oss.c:457 snd_pcm_oss_change_params+0x17d3/0x3720 sound/core/oss/pcm_oss.c:969 snd_pcm_oss_make_ready+0xaa/0x130 sound/core/oss/pcm_oss.c:1128 snd_pcm_oss_sync+0x257/0x830 sound/core/oss/pcm_oss.c:1638 snd_pcm_oss_release+0x20b/0x280 sound/core/oss/pcm_oss.c:2431 __fput+0x327/0x7e0 fs/file_table.c:210 .... This happens while it tries to open and set up the aloop device concurrently. The warning above (invoked from snd_BUG_ON() macro) is to detect the unexpected logical error where snd_pcm_hw_refine() call shouldn't fail. The theory is true for the case where the hw_params config rules are static. But for an aloop device, the hw_params rule condition does vary dynamically depending on the connected target; when another device is opened and changes the parameters, the device connected in another side is also affected, and it caused the error from snd_pcm_hw_refine(). That is, the simplest "solution" for this is to remove the incorrect assumption of static rules, and treat such an error as a normal error path. As there are a couple of other places using snd_BUG_ON() incorrectly, this patch removes these spurious snd_BUG_ON() calls. Reported-by: syzbot+6f11c7e2a1b91d466432@syzkaller.appspotmail.com Signed-off-by:
-
Jean-Philippe Brucker authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 57d72e15 upstream. Kasan reports a double free when finalise_stage_fn fails: the io_pgtable ops are freed by arm_smmu_domain_finalise and then again by arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure. Fixes: 48ec83bc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Vikas C Sajjan authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 25271415 upstream. Platforms which support only IOAPIC mode, pass the SCI information above the legacy space (0-15) via the FADT mechanism and not via MADT. In such cases mp_override_legacy_irq() which is invoked from acpi_sci_ioapic_setup() to register SCI interrupts fails for interrupts greater equal 16, since it is meant to handle only the legacy space and emits error "Invalid bus_irq %u for legacy override". Add a new function to handle SCI interrupts >= 16 and invoke it conditionally in acpi_sci_ioapic_setup(). The code duplication due to this new function will be cleaned up in a separate patch. Co-developed-by:
Sunil V L <sunil.vl@hpe.com> Signed-off-by:
Abdul Lateef Attar <abdul-lateef.attar@hpe.com> Acked-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 8705d603 upstream. arch/x86/built-in.o: In function `arch_setup_additional_pages': (.text+0x587): undefined reference to `pvclock_pvti_cpu0_va' KVM_GUEST selects PARAVIRT_CLOCK, so we can make pvclock_pvti_cpu0_va depend on KVM_GUEST. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Tested-by:
Borislav Petkov <bp@alien8.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/444d38a9bcba832685740ea1401b569861d09a72.1451446564.git.luto@kernel.orgSigned-off-by:
-
Andrey Ryabinin authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 68920c97 upstream. With upcoming CONFIG_UBSAN the following BUILD_BUG_ON in net/mac80211/debugfs.c starts to trigger: BUILD_BUG_ON(hw_flag_names[NUM_IEEE80211_HW_FLAGS] != (void *)0x1); It seems, that compiler instrumentation causes some code deoptimizations. Because of that GCC is not being able to resolve condition in BUILD_BUG_ON() at compile time. We could make size of hw_flag_names array unspecified and replace the condition in BUILD_BUG_ON() with following: ARRAY_SIZE(hw_flag_names) != NUM_IEEE80211_HW_FLAGS That will have the same effect as before (adding new flag without updating array will trigger build failure) except it doesn't fail with CONFIG_UBSAN. As a bonus this patch slightly decreases size of hw_flag_names array. Signed-off-by:
Daniel Wagner <daniel.wagner@siemens.com> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit c8c5a3a2 upstream. Complement commit c23b3d1a ("MIPS: ptrace: Change GP regset to use correct core dump register layout") and also reject outsized PTRACE_SETREGSET requests to the NT_PRFPREG regset, like with the NT_PRSTATUS regset. Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Fixes: c23b3d1a ("MIPS: ptrace: Change GP regset to use correct core dump register layout") Cc: James Hogan <james.hogan@mips.com> Cc: Paul Burton <Paul.Burton@mips.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Dave Martin <Dave.Martin@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17930/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 006501e0 upstream. Complement commit d614fd58 ("mips/ptrace: Preserve previous registers for short regset write") and like with the PTRACE_GETREGSET ptrace(2) request also apply a BUILD_BUG_ON check for the size of the `elf_fpreg_t' type in the PTRACE_SETREGSET request handler. Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit be07a6a1 upstream. Fix a commit 72b22bba ("MIPS: Don't assume 64-bit FP registers for FP regset") public API regression, then activated by commit 1db1af84 ("MIPS: Basic MSA context switching support"), that caused the FCSR register not to be read or written for CONFIG_CPU_HAS_MSA kernel configurations (regardless of actual presence or absence of the MSA feature in a given processor) with ptrace(2) PTRACE_GETREGSET and PTRACE_SETREGSET requests nor recorded in core dumps. This is because with !CONFIG_CPU_HAS_MSA configurations the whole of `elf_fpregset_t' array is bulk-copied as it is, which includes the FCSR in one half of the last, 33rd slot, whereas with CONFIG_CPU_HAS_MSA configurations array elements are copied individually, and then only the leading 32 FGR slots while the remaining slot is ignored. Correct the code then such that only FGR slots are copied in the respective !MSA and MSA helpers an then the FCSR slot is handled separately in common code. Use `ptrace_setfcr31' to update the FCSR too, so that the read-only mask is respected. Retrieving a correct value of FCSR is important in debugging not only for the human to be able to get the right interpretation of the situation, but for correct operation of GDB as well. This is because the condition code bits in FSCR are used by GDB to determine the location to place a breakpoint at when single-stepping through an FPU branch instruction. If such a breakpoint is placed incorrectly (i.e. with the condition reversed), then it will be missed, likely causing the debuggee to run away from the control of GDB and consequently breaking the process of investigation. Fortunately GDB continues using the older PTRACE_GETFPREGS ptrace(2) request which is unaffected, so the regression only really hits with post-mortem debug sessions using a core dump file, in which case execution, and consequently single-stepping through branches is not possible. Of course core files created by buggy kernels out there will have the value of FCSR recorded clobbered, but such core files cannot be corrected and the person using them simply will have to be aware that the value of FCSR retrieved is not reliable. Which also means we can likely get away without defining a replacement API which would ensure a correct value of FSCR to be retrieved, or none at all. This is based on previous work by Alex Smith, extensively rewritten. Signed-off-by:
Alex Smith <alex@alex-smith.me.uk> Signed-off-by:
James Hogan <james.hogan@mips.com> Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit 80b3ffce upstream. Update commit d614fd58 ("mips/ptrace: Preserve previous registers for short regset write") bug and consistently consume all data supplied to `fpr_set_msa' with the ptrace(2) PTRACE_SETREGSET request, such that a zero data buffer counter is returned where insufficient data has been given to fill a whole number of FP general registers. In reality this is not going to happen, as the caller is supposed to only supply data covering a whole number of registers and it is verified in `ptrace_regset' and again asserted in `fpr_set', however structuring code such that the presence of trailing partial FP general register data causes `fpr_set_msa' to return with a non-zero data buffer counter makes it appear that this trailing data will be used if there are subsequent writes made to FP registers, which is going to be the case with the FCSR once the missing write to that register has been fixed. Fixes: d614fd58 ("mips/ptrace: Preserve previous registers for short regset write") Signed-off-by:
-
Maciej W. Rozycki authored
BugLink: http://bugs.launchpad.net/bugs/1745266 commit dc24d0ed upstream. Complement commit d614fd58 ("mips/ptrace: Preserve previous registers for short regset write") and ensure that no partial register write attempt is made with PTRACE_SETREGSET, as we do not preinitialize any temporaries used to hold incoming register data and consequently random data could be written. It is the responsibility of the caller, such as `ptrace_regset', to arrange for writes to span whole registers only, so here we only assert that it has indeed happened. Signed-off-by:
-
