- 01 Mar, 2022 5 commits
-
-
Paul Blakey authored
After cited commit optimizted hw insertion, flow table entries are populated with ifindex information which was intended to only be used for HW offload. This tuple ifindex is hashed in the flow table key, so it must be filled for lookup to be successful. But tuple ifindex is only relevant for the netfilter flowtables (nft), so it's not filled in act_ct flow table lookup, resulting in lookup failure, and no SW offload and no offload teardown for TCP connection FIN/RST packets. To fix this, add new tc ifindex field to tuple, which will only be used for offloading, not for lookup, as it will not be part of the tuple hash. Fixes: 9795ded7 ("net/sched: act_ct: Fill offloading tuple iifidx") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
In case someone combines bpf socket assign and nf_queue, then we will queue an skb who references a struct sock that did not have its reference count incremented. As we leave rcu protection, there is no guarantee that skb->sk is still valid. For refcount-less skb->sk case, try to increment the reference count and then override the destructor. In case of failure we have two choices: orphan the skb and 'delete' preselect or let nf_queue() drop the packet. Do the latter, it should not happen during normal operation. Fixes: cf7fbe66 ("bpf: Add socket assign support") Acked-by:
Joe Stringer <joe@cilium.io> Signed-off-by:
Florian Westphal <fw@strlen.de>
-
Florian Westphal authored
Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change Fixes: 271b72c7 ("udp: RCU handling for Unicast packets.") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Florian Westphal authored
causes: BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80 Write of size 4 at addr ffff888106df0284 by task nf-queue/1459 sk_free+0x25/0x80 nf_queue_entry_release_refs+0x143/0x1a0 nf_reinject+0x233/0x770 ... without 'netfilter: nf_queue: don't assume sk is full socket'. Signed-off-by: -
Florian Westphal authored
There is no guarantee that state->sk refers to a full socket. If refcount transitions to 0, sock_put calls sk_free which then ends up with garbage fields. I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable debug work and pointing out state->sk oddities. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Tested-by:
Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by:
-
- 28 Feb, 2022 2 commits
-
-
Florian Westphal authored
Netfilter assumes its called with rcu_read_lock held, but in egress hook case it may be called with BH readlock. This triggers lockdep splat. In order to avoid to change all rcu_dereference() to rcu_dereference_check(..., rcu_read_lock_bh_held()), wrap nf_hook_slow with read lock/unlock pair. Reported-by:
-
Eric Dumazet authored
We must not dereference @new_hooks after nf_hook_mutex has been released, because other threads might have freed our allocated hooks already. BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline] BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430 CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline] hooks_validate net/netfilter/core.c:171 [inline] __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline] find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline] do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024 rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084 __sys_setsockopt+0x2db/0x610 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f65a1ace7d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9 RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003 RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130 R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000 </TASK> The buggy address belongs to the page: page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 __alloc_pages_node include/linux/gfp.h:572 [inline] alloc_pages_node include/linux/gfp.h:595 [inline] kmalloc_large_node+0x62/0x130 mm/slub.c:4438 __kmalloc_node+0x35a/0x4a0 mm/slub.c:4454 kmalloc_node include/linux/slab.h:604 [inline] kvmalloc_node+0x97/0x100 mm/util.c:580 kvmalloc include/linux/slab.h:731 [inline] kvzalloc include/linux/slab.h:739 [inline] allocate_hook_entries_size net/netfilter/core.c:61 [inline] nf_hook_entries_grow+0x140/0x780 net/netfilter/core.c:128 __nf_register_net_hook+0x144/0x820 net/netfilter/core.c:429 nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571 nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587 nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218 synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81 xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038 check_target net/ipv6/netfilter/ip6_tables.c:530 [inline] find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573 translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735 do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline] do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1352 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404 free_unref_page_prepare mm/page_alloc.c:3325 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3404 kvfree+0x42/0x50 mm/util.c:613 rcu_do_batch kernel/rcu/tree.c:2527 [inline] rcu_core+0x7b1/0x1820 kernel/rcu/tree.c:2778 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Memory state around the buggy address: ffff88801c1a7f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88801c1a7f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88801c1a8000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88801c1a8080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88801c1a8100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 2420b79f ("netfilter: debug: check for sorted array") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
-
- 23 Feb, 2022 4 commits
-
-
Eric Dumazet authored
While kfree_rcu(ptr) _is_ supported, it has some limitations. Given that 99.99% of kfree_rcu() users [1] use the legacy two parameters variant, and @catchall objects do have an rcu head, simply use it. Choice of kfree_rcu(ptr) variant was probably not intentional. [1] including calls from net/netfilter/nf_tables_api.c Fixes: aaa31047 ("netfilter: nftables: add catch-all set element support") Signed-off-by:
-
Sukadev Bhattiprolu authored
If client is unable to initiate a failover reset via H_VIOCTL hcall, then it should schedule a failover reset as a last resort. Otherwise, there is no need to do a last resort. Fixes: 334c4241 ("ibmvnic: improve failover sysfs entry") Reported-by:
Cris Forno <cforno12@outlook.com> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20220221210545.115283-1-drt@linux.ibm.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alvin Šipraga authored
If a bridged port is not offloaded to the hardware - either because the underlying driver does not implement the port_bridge_{join,leave} ops, or because the operation failed - then its dp->bridge pointer will be NULL when dsa_port_bridge_leave() is called. Avoid dereferncing NULL. This fixes the following splat when removing a port from a bridge: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP CPU: 3 PID: 1119 Comm: brctl Tainted: G O 5.17.0-rc4-rt4 #1 Call trace: dsa_port_bridge_leave+0x8c/0x1e4 dsa_slave_changeupper+0x40/0x170 dsa_slave_netdevice_event+0x494/0x4d4 notifier_call_chain+0x80/0xe0 raw_notifier_call_chain+0x1c/0x24 call_netdevice_notifiers_info+0x5c/0xac __netdev_upper_dev_unlink+0xa4/0x200 netdev_upper_dev_unlink+0x38/0x60 del_nbp+0x1b0/0x300 br_del_if+0x38/0x114 add_del_if+0x60/0xa0 br_ioctl_stub+0x128/0x2dc br_ioctl_call+0x68/0xb0 dev_ifsioc+0x390/0x554 dev_ioctl+0x128/0x400 sock_do_ioctl+0xb4/0xf4 sock_ioctl+0x12c/0x4e0 __arm64_sys_ioctl+0xa8/0xf0 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x28/0x84 el0_svc+0x1c/0x50 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x17c/0x180 Code: f9402f00 f0002261 f9401302 913cc021 (a9401404) ---[ end trace 0000000000000000 ]--- Fixes: d3eed0e5 ("net: dsa: keep the bridge_dev and bridge_num as part of the same structure") Signed-off-by:Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220221203539.310690-1-alvin@pqrs.dkSigned-off-by:
-
Eric Dumazet authored
Whenever one of these functions pull all data from an skb in a frag_list, use consume_skb() instead of kfree_skb() to avoid polluting drop monitoring. Fixes: 6fa01ccd ("skbuff: Add pskb_extract() helper function") Signed-off-by:
-
- 22 Feb, 2022 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net This is fixing up the use without proper initialization in patch 5/5 -o- Hi, The following patchset contains Netfilter fixes for net: 1) Missing #ifdef CONFIG_IP6_NF_IPTABLES in recent xt_socket fix. 2) Fix incorrect flow action array size in nf_tables. 3) Unregister flowtable hooks from netns exit path. 4) Fix missing limit object release, from Florian Westphal. 5) Memleak in nf_tables object update path, also from Florian. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
stateful objects can be updated from the control plane. The transaction logic allocates a temporary object for this purpose. The ->init function was called for this object, so plain kfree() leaks resources. We must call ->destroy function of the object. nft_obj_destroy does this, but it also decrements the module refcount, but the update path doesn't increment it. To avoid special-casing the update object release, do module_get for the update case too and release it via nft_obj_destroy(). Fixes: d62d0ba9 ("netfilter: nf_tables: Introduce stateful object update operation") Cc: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by:
-
- 21 Feb, 2022 4 commits
-
-
Florian Westphal authored
We need to provide a destroy callback to release the extra fields. Fixes: 3b9e2ea6 ("netfilter: nft_limit: move stateful fields out of expression data") Signed-off-by:
-
Pablo Neira Ayuso authored
Unregister flowtable hooks before they are releases via nf_tables_flowtable_destroy() otherwise hook core reports UAF. BUG: KASAN: use-after-free in nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 Read of size 4 at addr ffff8880736f7438 by task syz-executor579/3666 CPU: 0 PID: 3666 Comm: syz-executor579 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] __dump_stack lib/dump_stack.c:88 [inline] lib/dump_stack.c:106 dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106 lib/dump_stack.c:106 print_address_description+0x65/0x380 mm/kasan/report.c:247 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] __kasan_report mm/kasan/report.c:433 [inline] mm/kasan/report.c:450 kasan_report+0x19a/0x1f0 mm/kasan/report.c:450 mm/kasan/report.c:450 nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 __nf_register_net_hook+0x27e/0x8d0 net/netfilter/core.c:429 net/netfilter/core.c:429 nf_register_net_hook+0xaa/0x180 net/netfilter/core.c:571 net/netfilter/core.c:571 nft_register_flowtable_net_hooks+0x3c5/0x730 net/netfilter/nf_tables_api.c:7232 net/netfilter/nf_tables_api.c:7232 nf_tables_newflowtable+0x2022/0x2cf0 net/netfilter/nf_tables_api.c:7430 net/netfilter/nf_tables_api.c:7430 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv+0x10e6/0x2550 net/netfilter/nfnetlink.c:652 net/netfilter/nfnetlink.c:652 __nft_release_hook() calls nft_unregister_flowtable_net_hooks() which only unregisters the hooks, then after RCU grace period, it is guaranteed that no packets add new entries to the flowtable (no flow offload rules and flowtable hooks are reachable from packet path), so it is safe to call nf_flow_table_free() which cleans up the remaining entries from the flowtable (both software and hardware) and it unbinds the flow_block. Fixes: ff4bf2f4 ("netfilter: nf_tables: add nft_unregister_flowtable_hook()") Reported-by: syzbot+e918523f77e62790d6d9@syzkaller.appspotmail.com Signed-off-by:
-
Baruch Siach authored
Experimentation shows that PHY detect might fail when the code attempts MDIO bus read immediately after clock enable. Add delay to stabilize the clock before bus access. PHY detect failure started to show after commit 7590fc6f ("net: mdio: Demote probed message to debug print") that removed coincidental delay between clock enable and bus access. 10ms is meant to match the time it take to send the probed message over UART at 115200 bps. This might be a far overshoot. Fixes: 23a890d4 ("net: mdio: Add the reset function for IPQ MDIO driver") Signed-off-by:
Baruch Siach <baruch.siach@siklu.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Tao Liu authored
We encounter a tcp drop issue in our cloud environment. Packet GROed in host forwards to a VM virtio_net nic with net_failover enabled. VM acts as a IPVS LB with ipip encapsulation. The full path like: host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat -> ipip encap -> net_failover tx -> virtio_net tx When net_failover transmits a ipip pkt (gso_type = 0x0103, which means SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso did because it supports TSO and GSO_IPXIP4. But network_header points to inner ip header. Call Trace: tcp4_gso_segment ------> return NULL inet_gso_segment ------> inner iph, network_header points to ipip_gso_segment inet_gso_segment ------> outer iph skb_mac_gso_segment Afterwards virtio_net transmits the pkt, only inner ip header is modified. And the outer one just keeps unchanged. The pkt will be dropped in remote host. Call Trace: inet_gso_segment ------> inner iph, outer iph is skipped skb_mac_gso_segment __skb_gso_segment validate_xmit_skb validate_xmit_skb_list sch_direct_xmit __qdisc_run __dev_queue_xmit ------> virtio_net dev_hard_start_xmit __dev_queue_xmit ------> net_failover ip_finish_output2 ip_output iptunnel_xmit ip_tunnel_xmit ipip_tunnel_xmit ------> ipip dev_hard_start_xmit __dev_queue_xmit ip_finish_output2 ip_output ip_forward ip_rcv __netif_receive_skb_one_core netif_receive_skb_internal napi_gro_receive receive_buf virtnet_poll net_rx_action The root cause of this issue is specific with the rare combination of SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option. SKB_GSO_DODGY is set from external virtio_net. We need to reset network header when callbacks.gso_segment() returns NULL. This patch also includes ipv6_gso_segment(), considering SIT, etc. Fixes: cb32f511 ("ipip: add GSO/TSO support") Signed-off-by:
Tao Liu <thomas.liu@ucloud.cn> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
- 20 Feb, 2022 9 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes This series contains bug fixes for FEC reporting, ethtool self test, multicast setup, devlink health reporting and live patching, and a firmware response timeout. ==================== Signed-off-by: -
Kalesh AP authored
To install a livepatch, first flash the package to NVM, and then activate the patch through the "HWRM_FW_LIVEPATCH" fw command. To uninstall a patch from NVM, flash the removal package and then activate it through the "HWRM_FW_LIVEPATCH" fw command. The "HWRM_FW_LIVEPATCH" fw command has to consider following scenarios: 1. no patch in NVM and no patch active. Do nothing. 2. patch in NVM, but not active. Activate the patch currently in NVM. 3. patch is not in NVM, but active. Deactivate the patch. 4. patch in NVM and the patch active. Do nothing. Fix the code to handle these scenarios during devlink "fw_activate". To install and activate a live patch: devlink dev flash pci/0000:c1:00.0 file thor_patch.pkg devlink -f dev reload pci/0000:c1:00.0 action fw_activate limit no_reset To remove and deactivate a live patch: devlink dev flash pci/0000:c1:00.0 file thor_patch_rem.pkg devlink -f dev reload pci/0000:c1:00.0 action fw_activate limit no_reset Fixes: 3c415339 ("bnxt_en: implement firmware live patching") Reviewed-by:
Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
When polling for the firmware message response, we first poll for the response message header. Once the valid length is detected in the header, we poll for the valid bit at the end of the message which signals DMA completion. Normally, this poll time for DMA completion is extremely short (0 to a few usec). But on some devices under some rare conditions, it can be up to about 20 msec. Increase this delay to 50 msec and use udelay() for the first 10 usec for the common case, and usleep_range() beyond that. Also, change the error message to include the above delay time when printing the timeout value. Fixes: 3c8c20db ("bnxt_en: move HWRM API implementation into separate file") Reviewed-by:
Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by:
-
Kalesh AP authored
During ifdown, we call bnxt_inv_fw_health_reg() which will clear both the status_reliable and resets_reliable flags if these registers are mapped. This is correct because a FW reset during ifdown will clear these register mappings. If we detect that FW has gone through reset during the next ifup, we will remap these registers. But during normal ifup with no FW reset, we need to restore the resets_reliable flag otherwise we will not show the reset counter during devlink diagnose. Fixes: 8cc95ceb ("bnxt_en: improve fw diagnose devlink health messages") Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
-
Pavan Chebbi authored
We should setup multicast only when net_device flags explicitly has IFF_MULTICAST set. Otherwise we will incorrectly turn it on even when not asked. Fix it by only passing the multicast table to the firmware if IFF_MULTICAST is set. Fixes: 7d2837dd ("bnxt_en: Setup multicast properly after resetting device.") Signed-off-by:
-
Michael Chan authored
In the current code, we setup the port to PHY or MAC loopback mode and then transmit a test broadcast packet for the loopback test. This scheme fails sometime if the port is shared with management firmware that can also send packets. The driver may receive the management firmware's packet and the test will fail when the contents don't match the test packet. Change the test packet to use it's own MAC address as the destination and setup the port to only receive it's own MAC address. This should filter out other packets sent by management firmware. Fixes: 91725d89 ("bnxt_en: Add PHY loopback to ethtool self-test.") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
-
Michael Chan authored
For offline (destructive) self tests, we need to stop the RDMA driver first. Otherwise, the RDMA driver will run into unrecoverable errors when destructive firmware tests are being performed. The irq_re_init parameter used in the half close and half open sequence when preparing the NIC for offline tests should be set to true because the RDMA driver will free all IRQs before the offline tests begin. Fixes: 55fd0cf3 ("bnxt_en: Add external loopback test to ethtool selftest.") Reviewed-by:
Ben Li <ben.li@broadcom.com> Signed-off-by:
-
Somnath Kotur authored
ethtool --show-fec <interface> does not show anything when the Active FEC setting in the chip is set to None. Fix it to properly return ETHTOOL_FEC_OFF in that case. Fixes: 8b277589 ("bnxt_en: Report FEC settings to ethtool.") Signed-off-by:
-
Pablo Neira Ayuso authored
immediate verdict expression needs to allocate one slot in the flow offload action array, however, immediate data expression does not need to do so. fwd and dup expression need to allocate one slot, this is missing. Add a new offload_action interface to report if this expression needs to allocate one slot in the flow offload action array. Fixes: be2861dc ("netfilter: nft_{fwd,dup}_netdev: add offload support") Reported-and-tested-by:
Nick Gregory <Nick.Gregory@Sophos.com> Signed-off-by:
-
- 19 Feb, 2022 14 commits
-
-
Vladimir Oltean authored
If the DSA master doesn't support IFF_UNICAST_FLT, then the following call path is possible: dsa_slave_switchdev_event_work -> dsa_port_host_fdb_add -> dev_uc_add -> __dev_set_rx_mode -> __dev_set_promiscuity Since the blamed commit, dsa_slave_switchdev_event_work() no longer holds rtnl_lock(), which triggers the ASSERT_RTNL() from __dev_set_promiscuity(). Taking rtnl_lock() around dev_uc_add() is impossible, because all the code paths that call dsa_flush_workqueue() do so from contexts where the rtnl_mutex is already held - so this would lead to an instant deadlock. dev_uc_add() in itself doesn't require the rtnl_mutex for protection. There is this comment in __dev_set_rx_mode() which assumes so: /* Unicast addresses changes may only happen under the rtnl, * therefore calling __dev_set_promiscuity here is safe. */ but it is from commit 4417da66 ("[NET]: dev: secondary unicast address support") dated June 2007, and in the meantime, commit f1f28aa3 ("netdev: Add addr_list_lock to struct net_device."), dated July 2008, has added &dev->addr_list_lock to protect this instead of the global rtnl_mutex. Nonetheless, __dev_set_promiscuity() does assume rtnl_mutex protection, but it is the uncommon path of what we typically expect dev_uc_add() to do. So since only the uncommon path requires rtnl_lock(), just check ahead of time whether dev_uc_add() would result into a call to __dev_set_promiscuity(), and handle that condition separately. DSA already configures the master interface to be promiscuous if the tagger requires this. We can extend this to also cover the case where the master doesn't handle dev_uc_add() (doesn't support IFF_UNICAST_FLT), and on the premise that we'd end up making it promiscuous during operation anyway, either if a DSA slave has a non-inherited MAC address, or if the bridge notifies local FDB entries for its own MAC address, the address of a station learned on a foreign port, etc. Fixes: 0faf890f ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Reported-by:Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Svenning Sørensen authored
Commit b3612ccd ("net: dsa: microchip: implement multi-bridge support") plugged a packet leak between ports that were members of different bridges. Unfortunately, this broke another use case, namely that of more than two ports that are members of the same bridge. After that commit, when a port is added to a bridge, hardware bridging between other member ports of that bridge will be cleared, preventing packet exchange between them. Fix by ensuring that the Port VLAN Membership bitmap includes any existing ports in the bridge, not just the port being added. Fixes: b3612ccd ("net: dsa: microchip: implement multi-bridge support") Signed-off-by:
Svenning Sørensen <sss@secomea.com> Tested-by:
-
Christophe Leroy authored
All functions defined as static inline in net/checksum.h are meant to be inlined for performance reason. But since commit ac7c3e4f ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") the compiler is allowed to uninline functions when it wants. Fair enough in the general case, but for tiny performance critical checksum helpers that's counter-productive. The problem mainly arises when selecting CONFIG_CC_OPTIMISE_FOR_SIZE, Those helpers being 'static inline' in header files you suddenly find them duplicated many times in the resulting vmlinux. Here is a typical exemple when building powerpc pmac32_defconfig with CONFIG_CC_OPTIMISE_FOR_SIZE. csum_sub() appears 4 times: c04a23cc <csum_sub>: c04a23cc: 7c 84 20 f8 not r4,r4 c04a23d0: 7c 63 20 14 addc r3,r3,r4 c04a23d4: 7c 63 01 94 addze r3,r3 c04a23d8: 4e 80 00 20 blr ... c04a2ce8: 4b ff f6 e5 bl c04a23cc <csum_sub> ... c04a2d2c: 4b ff f6 a1 bl c04a23cc <csum_sub> ... c04a2d54: 4b ff f6 79 bl c04a23cc <csum_sub> ... c04a754c <csum_sub>: c04a754c: 7c 84 20 f8 not r4,r4 c04a7550: 7c 63 20 14 addc r3,r3,r4 c04a7554: 7c 63 01 94 addze r3,r3 c04a7558: 4e 80 00 20 blr ... c04ac930: 4b ff ac 1d bl c04a754c <csum_sub> ... c04ad264: 4b ff a2 e9 bl c04a754c <csum_sub> ... c04e3b08 <csum_sub>: c04e3b08: 7c 84 20 f8 not r4,r4 c04e3b0c: 7c 63 20 14 addc r3,r3,r4 c04e3b10: 7c 63 01 94 addze r3,r3 c04e3b14: 4e 80 00 20 blr ... c04e5788: 4b ff e3 81 bl c04e3b08 <csum_sub> ... c04e65c8: 4b ff d5 41 bl c04e3b08 <csum_sub> ... c0512d34 <csum_sub>: c0512d34: 7c 84 20 f8 not r4,r4 c0512d38: 7c 63 20 14 addc r3,r3,r4 c0512d3c: 7c 63 01 94 addze r3,r3 c0512d40: 4e 80 00 20 blr ... c0512dfc: 4b ff ff 39 bl c0512d34 <csum_sub> ... c05138bc: 4b ff f4 79 bl c0512d34 <csum_sub> ... Restore the expected behaviour by using __always_inline for all functions defined in net/checksum.h vmlinux size is even reduced by 256 bytes with this patch: text data bss dec hex filename 6980022 2515362 194384 9689768 93daa8 vmlinux.before 6979862 2515266 194384 9689512 93d9a8 vmlinux.now Fixes: ac7c3e4f ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-18 This series contains updates to ice driver only. Wojciech fixes protocol matching for slow-path switchdev so that all packets are correctly redirected. Michal removes accidental unconditional setting of l4 port filtering flag. Jake adds locking to protect VF reset and removal to fix various issues that can be encountered when they race with each other. Tom Rix propagates an error and initializes a struct to resolve reported Clang issues. ==================== Signed-off-by: -
David S. Miller authored
Mat Martineau says: ==================== mptcp: Fix address advertisement races and stabilize tests Patches 1, 2, and 7 modify two self tests to give consistent, accurate results by fixing timing issues and accounting for syncookie behavior. Paches 3-6 fix two races in overlapping address advertisement send and receive. Associated self tests are updated, including addition of two MIBs to enable testing and tracking dropped address events. ==================== Signed-off-by: -
Paolo Abeni authored
Since commit 2843ff6f ("mptcp: remote addresses fullmesh"), an MPTCP client can attempt creating multiple MPJ subflow simultaneusly. In such scenario the server, when syncookies are enabled, could end-up accepting incoming MPJ syn even above the configured subflow limit, as the such limit can be enforced in a reliable way only after the subflow creation. In case of syncookie, only after the 3rd ack reception. As a consequence the related self-tests case sporadically fails, as it verify that the server always accept the expected number of MPJ syn. Address the issues relaxing the MPJ syn number constrain. Note that the check on the accepted number of MPJ 3rd ack still remains intact. Fixes: 2843ff6f ("mptcp: remote addresses fullmesh") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
The in kernel MPTCP PM implementation can process a single incoming add address option at any given time. In the mentioned test the server can surpass such limit. Let the setup cope with that allowing a faster add_addr retransmission. Fixes: a88c9e49 ("mptcp: do not block subflows creation on errors") Fixes: f7efc777 ("mptcp: drop argument port from mptcp_pm_announce_addr") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/254Reported-and-tested-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by:
-
Paolo Abeni authored
The MPTCP in kernel path manager has some constraints on incoming addresses announce processing, so that in edge scenarios it can end-up dropping (ignoring) some of such announces. The above is not very limiting in practice since such scenarios are very uncommon and MPTCP will recover due to ADD_ADDR retransmissions. This patch adds a few MIB counters to account for such drop events to allow easier introspection of the critical scenarios. Fixes: f7efc777 ("mptcp: drop argument port from mptcp_pm_announce_addr") Reviewed-by:
-
Paolo Abeni authored
If an MPTCP endpoint received multiple consecutive incoming ADD_ADDR options, mptcp_pm_add_addr_received() can overwrite the current remote address value after the PM lock is released in mptcp_pm_nl_add_addr_received() and before such address is echoed. Fix the issue caching the remote address value a little earlier and always using the cached value after releasing the PM lock. Fixes: f7efc777 ("mptcp: drop argument port from mptcp_pm_announce_addr") Reviewed-by:
-
Paolo Abeni authored
After commit a88c9e49 ("mptcp: do not block subflows creation on errors"), if a signal address races with a failing subflow creation, the subflow creation failure control path can trigger the selection of the next address to be announced while the current announced is still pending. The above will cause the unintended suppression of the ADD_ADDR announce. Fix the issue skipping the to-be-suppressed announce before it will mark an endpoint as already used. The relevant announce will be triggered again when the current one will complete. Fixes: a88c9e49 ("mptcp: do not block subflows creation on errors") Reviewed-by:
-
Paolo Abeni authored
The mentioned test has to wait for a subflow creation failure. The current code looks for TCP sockets in TW state and sometimes misses the relevant event. Switch to a more stable check, looking for the associated mib counter. Fixes: 46e967d1 ("selftests: mptcp: add tests for subflow creation failure") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/257Reported-and-tested-by:
-
Paolo Abeni authored
Instead of waiting for an arbitrary amount of time for the MPTCP MP_CAPABLE handshake to complete, explicitly wait for the relevant socket to enter into the established status. Additionally let the data transfer application use the slowest transfer mode available (-r), to cope with very slow host, or high jitter caused by hosting VMs. Fixes: df62f2ec ("selftests/mptcp: add diag interface tests") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258Reported-and-tested-by:
-
Christophe JAILLET authored
ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX) inclusive. So NFP_MAX_MAC_INDEX (0xff) is a valid id. In order for the error handling path to work correctly, the 'invalid' value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range, inclusive. So set it to -1. Fixes: 20cce886 ("nfp: flower: enable MAC address sharing for offloadable devs") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220218131535.100258-1-simon.horman@corigine.comSigned-off-by:
-
Subash Abhinov Kasiviswanathan authored
Switch to the quicinc.com ids. Signed-off-by:
Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Link: https://lore.kernel.org/r/1645174218-32632-1-git-send-email-quic_subashab@quicinc.comSigned-off-by:
-
