- 06 Nov, 2020 3 commits
-
-
Peter Ujfalusi authored
The legacy dma_request (which was holding the DMA request number) is no longer in use for a long time. All legacy platforms has been converted to dma_slave_map. Remove it along with the DT parsing to get tx_dma_channel and rx_dma_channel. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20201106072551.689-3-peter.ujfalusi@ti.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
Depending on the integration of McASP either the 'common' or the 'rx' and 'tx' or only the 'tx' interrupt number is valid, provided. By switching to platform_get_irq_byname_optional() we can clean up the bootlog from messages like: davinci-mcasp 2ba0000.mcasp: IRQ common not found The irq number == 0 is not valid, fix the check at the same time. Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Rob, Mark Cc: Sameer These are v6 of switch to yaml base Documentation for audio-graph-card and renesas,rsnd which uses audio-graph-card. v5 -> v6 - add Acked-by/Reviewed-by on each patch - remove "audio-graph-card,xxx" property - remove un-needed if "ok" v4 -> v5 - move "endpoint" under "port" v3 -> v4 - fixuped yamllint warnings/errors v2 -> v3 - fixuped Rob's pointed points v1 -> v2 - upgrade dt-schema, and fixup errors for [2/2] patch Kuninori Morimoto (3): dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support .../bindings/sound/audio-graph-card.txt | 337 ------------ .../bindings/sound/audio-graph-card.yaml | 153 ++++++ .../bindings/sound/renesas,rsnd.txt | 520 ------------------ .../bindings/sound/renesas,rsnd.yaml | 451 +++++++++++++++ 4 files changed, 604 insertions(+), 857 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml -- 2.25.1
-
- 05 Nov, 2020 12 commits
-
-
Kuninori Morimoto authored
Document R-Car M3-W+ (R8A77961) SoC bindings. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/87a6vwbavq.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
This patch switches from .txt base to .yaml base Document. It is still keeping detail explanations at .txt Signed-off-by:
-
Kuninori Morimoto authored
This patch switches from .txt base to .yaml base Document. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Reviewed-by:
-
Shengjiu Wang authored
The AUD2HTX is a digital module that provides a bridge between the Audio Subsystem and the HDMI RTX Subsystem. This module includes intermediate storage to queue SDMA transactions prior to being synchronized and passed to the HDMI RTX Subsystem over the Audio Link. The AUD2HTX contains a DMA request routed to the SDMA module. This DMA request is controlled based on the watermark level in the 32-entry sample buffer. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1604281947-26874-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
AUD2HTX (Audio Subsystem TO HDMI TX Subsystem) is a new IP module found on i.MX8MP. Signed-off-by:
-
Xu Wang authored
ecause clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20201029090104.29552-1-vulab@iscas.ac.cnSigned-off-by:
-
Xu Wang authored
Because clk_disable_unprepare() already checked NULL clock parameter, so the additional check is unnecessary, just remove it. Signed-off-by:
-
Srinivas Kandagatla authored
This patch fixes below warning when module is compiled with W=1 C=1 sound/soc/qcom/qdsp6/q6afe-clocks.c:122:18: warning: symbol 'q6afe_clks' was not declared. Should it be static? Fixes: 520a1c39 ("ASoC: q6afe-clocks: add q6afe clock controller") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201105114435.22860-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Cezary Rojewski authored
soc-pcm's dpcm_fe_dai_do_trigger() supported DRAIN commnad up to kernel v5.4 where explicit switch(cmd) has been introduced which takes into account all SNDRV_PCM_TRIGGER_xxx but SNDRV_PCM_TRIGGER_DRAIN. Update switch statement to reactive support for it. As DRAIN is somewhat unique by lacking negative/stop counterpart, bring behaviour of dpcm_fe_dai_do_trigger() for said command back to its pre-v5.4 state by adding it to START/RESUME/PAUSE_RELEASE group. Fixes: acbf2774 ("ASoC: pcm: update FE/BE trigger order based on the command") Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20201026100129.8216-1-cezary.rojewski@intel.comSigned-off-by:
-
Zou Wei authored
Fix the following sparse warnings: ./mt8192-dai-i2s.c:2040:5: warning: symbol 'mt8192_dai_i2s_get_share' was not declared. Should it be static? ./mt8192-dai-i2s.c:2060:5: warning: symbol 'mt8192_dai_i2s_set_priv' was not declared. Should it be static? ./mt8192-afe-gpio.c:15:16: warning: symbol 'aud_pinctrl' was not declared. Should it be static? ./mt8192-afe-pcm.c:70:5: warning: symbol 'mt8192_get_memif_pbuf_size' was not declared. Should it be static? ./mt8192-afe-pcm.c:2137:39: warning: symbol 'mt8192_afe_component' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zou Wei <zou_wei@huawei.com> Acked-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1604579287-25251-1-git-send-email-zou_wei@huawei.comSigned-off-by:
-
Sudip Mukherjee authored
A build of arm64 allmodconfig with next-20201105 fails with the error: ERROR: modpost: "mt8192_afe_gpio_request" undefined! ERROR: modpost: "mt8192_afe_gpio_init" undefined! Export the symbols so that mt8192-mt6359-rt1015-rt5682.ko finds it. Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20201105124747.18383-1-sudipm.mukherjee@gmail.comSigned-off-by:
-
Srinivas Kandagatla authored
This patch fixes below warning when module is compiled with W=1 C=1 lpass-cpu.c:677:22: warning: symbol 'lpass_hdmi_regmap_config' was not declared. Should it be static? Fixes: 7cb37b7b ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by:
-
- 04 Nov, 2020 18 commits
-
-
Mark Brown authored
Merge series "ASoC: topology: Change to resource managed memory" from Amadeusz Sławiński<amadeuszx.slawinski@linux.intel.com>: Almost all other allocations in ASoC API are resource managed, the only exception is soc-topology.c. This patchset clean ups few unnecessary functions in preparation for change and then changes to devm_ functions for allocation. Amadeusz Sławiński (6): ASoC: topology: Remove unused functions from topology API ASoC: topology: Remove multistep topology loading ASoC: topology: Unify all device references ASoC: topology: Change allocations to resource managed ASoC: topology: Remove empty functions ASoC: topology: Simplify remove_widget function include/sound/soc-topology.h | 13 +- sound/soc/intel/skylake/skl-topology.c | 9 +- sound/soc/soc-topology.c | 302 +++++-------------------- sound/soc/sof/pcm.c | 2 +- sound/soc/sof/topology.c | 4 +- 5 files changed, 57 insertions(+), 273 deletions(-) -- 2.25.1
-
Mark Brown authored
This series of patches adds support for Mediatek AFE for MT8192 SoC. At the same time, the calibration function of MT6359 is completed with real machine driver. The patch is based on broonie tree "for-next" branch. Change since v3: - use normal conditional statements to improve legiblity in [v3,3/9] - remove mtk_i2s_hd_en_event as there's trace in the core - impove mt8192_i2s_enum and mt8192_adda_enum Change since v2: - split the dai driver files as a separate patch - fix dt-bindings to GPL-2.0-only License - remove unnecessary preperty descriptions such as 'maxItems' Change since v1: - fixed some typos related to dt-bindings in [v1,3/5] and [v1,5/5] - add vendor prefix to the properties, such as "mediatek,apmixedsys" - add a dependency description to indicate the required header files Jiaxin Yu (9): ASoC: mediatek: mt6359: add the calibration functions ASoC: mediatek: mt8192: add platform driver ASoC: mediatek: mt8192: support i2s in platform driver ASoC: mediatek: mt8192: support adda in platform driver ASoC: mediatek: mt8192: support pcm in platform driver ASoC: mediatek: mt8192: support tdm in platform driver dt-bindings: mediatek: mt8192: add audio afe document ASoC: mediatek: mt8192: add machine driver with mt6359, rt1015 and rt5682 dt-bindings: mediatek: mt8192: add mt8192-mt6358-rt1015-rt5682 document .../bindings/sound/mt8192-afe-pcm.yaml | 100 + .../sound/mt8192-mt6359-rt1015-rt5682.yaml | 42 + sound/soc/codecs/mt6359.c | 110 + sound/soc/codecs/mt6359.h | 7 + sound/soc/mediatek/Kconfig | 23 + sound/soc/mediatek/Makefile | 1 + sound/soc/mediatek/common/mtk-afe-fe-dai.c | 13 +- sound/soc/mediatek/common/mtk-base-afe.h | 1 + sound/soc/mediatek/mt8192/Makefile | 16 + sound/soc/mediatek/mt8192/mt8192-afe-clk.c | 669 ++++ sound/soc/mediatek/mt8192/mt8192-afe-clk.h | 244 ++ sound/soc/mediatek/mt8192/mt8192-afe-common.h | 170 + .../soc/mediatek/mt8192/mt8192-afe-control.c | 163 + sound/soc/mediatek/mt8192/mt8192-afe-gpio.c | 306 ++ sound/soc/mediatek/mt8192/mt8192-afe-gpio.h | 19 + sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 2389 +++++++++++++ sound/soc/mediatek/mt8192/mt8192-dai-adda.c | 1471 ++++++++ sound/soc/mediatek/mt8192/mt8192-dai-i2s.c | 2110 +++++++++++ sound/soc/mediatek/mt8192/mt8192-dai-pcm.c | 409 +++ sound/soc/mediatek/mt8192/mt8192-dai-tdm.c | 778 ++++ .../mediatek/mt8192/mt8192-interconnection.h | 65 + .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 1058 ++++++ sound/soc/mediatek/mt8192/mt8192-reg.h | 3131 +++++++++++++++++ 23 files changed, 13291 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml create mode 100644 Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml create mode 100644 sound/soc/mediatek/mt8192/Makefile create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-clk.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-clk.h create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-common.h create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-control.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-gpio.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-gpio.h create mode 100644 sound/soc/mediatek/mt8192/mt8192-afe-pcm.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-dai-adda.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-dai-i2s.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-dai-pcm.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-dai-tdm.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-interconnection.h create mode 100644 sound/soc/mediatek/mt8192/mt8192-mt6359-rt1015-rt5682.c create mode 100644 sound/soc/mediatek/mt8192/mt8192-reg.h -- 2.18.0 -
Shuming Fan authored
Add TDM slot callback function to support TDM configuration Signed-off-by:
Shuming Fan <shumingf@realtek.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20201104092005.2227-1-shumingf@realtek.comSigned-off-by:
-
Jiaxin Yu authored
This patch adds document for the machine board with mt6358, rt1015 and rt5682. Signed-off-by:
-
Jiaxin Yu authored
This patch adds support for the machine board with mt6359, rt1015 and rt5682. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 audio afe document. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 tdm dai driver. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 pcm dai driver. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 adda dai driver. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 i2s dai driver. Signed-off-by:
-
Jiaxin Yu authored
This patch adds mt8192 platform and affiliated drivers. Signed-off-by:
-
Jiaxin Yu authored
Add the calibraion functions for initializing the codec when registering the machine driver. Signed-off-by:
-
Amadeusz Sławiński authored
Now that enum and mixer kcontrols are freed by resource management framework, removing kcontrol becomes one function call, so simplify code in remove_widget. Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by:
-
Amadeusz Sławiński authored
After changing memory management to resource managed one, some of the functions became no ops, remove them as they are no longer needed. Reviewed-by:
-
Amadeusz Sławiński authored
In order for topology to be resource managed, change all allocations to be resource managed: k*alloc -> devm_k*alloc kstrdup -> devm_kstrdup Exceptions where non resource managed allocation is left is soc_tplg_dapm_widget_create(), as it uses pointer to memory locally and frees it up after use, as well as soc_tplg_dapm_graph_elems_load(), which has temporary pointer to table of routes. After conversion all redundant calls in error and clean up paths were removed. Also removed some variables which become unneeded when there is no calls using them. Reviewed-by:
-
Amadeusz Sławiński authored
In few places tplg->comp->dev is used, while everywhere else tplg->dev is being used. Unify those uses towards tplg->dev, as it is being set to comp->dev during initialization anyway. Reviewed-by:
-
Amadeusz Sławiński authored
In theory topology can be loaded in multiple steps by providing index to snd_soc_tplg_component_load, however, from usability point of view it doesn't make sense, as can be seen from all current users loading topology in one go. Remove the unnecessary parameter. Reviewed-by:
-
Amadeusz Sławiński authored
Topology API exposes snd_soc_tplg_widget_remove and snd_soc_tplg_widget_remove_all, but both are nowhere used. All current users load and unload topology as a whole. As following commits introduce resource managed memory, remove them to simplify code and reduce maintenance burden. Reviewed-by:
-
- 03 Nov, 2020 6 commits
-
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201101160312.2296146-1-trix@redhat.comSigned-off-by:
-
Dan Carpenter authored
This code is correct, but it should be indented one more tab. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201103101853.GD1127762@mwandaSigned-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
Zhang Qilong authored
davinci_mcasp_get_dt_params alway return zero, and its return value could be ignored by the caller. So make it 'void' type to avoid the check its return value. Fixes: 764958f2 ("ASoC: ti: davinci-mcasp: Support for auxclk-fs-ratio") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Acked-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
Codrin Ciubotariu authored
Besides the fact that muxclk is optional, muxclk can be set using assigned-clocks, removing the need to set it in driver. The warning is thus unneeded, so we can transform it in a debug print, eventually to just reflect that muxclk was not set by the driver. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20201103100554.1307190-1-codrin.ciubotariu@microchip.comSigned-off-by:
-
- 02 Nov, 2020 1 commit
-
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
