- 09 Jun, 2021 30 commits
-
-
Yang Yingliang authored
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shai Malin authored
This reverts commits: - 76241154 nvme: NVME_TCP_OFFLOAD should not default to m - 5ff5622e: Merge branch 'NVMeTCP-Offload-ULP' As requested on the mailing-list: https://lore.kernel.org/netdev/SJ0PR18MB3882C20793EA35A3E8DAE300CC379@SJ0PR18MB3882.namprd18.prod.outlook.com/ This patch will revert the nvme-tcp-offload ULP from net-next. The nvme-tcp-offload ULP series will continue to be considered only on linux-nvme@lists.infradead.org. Signed-off-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
-
Colin Ian King authored
The comparison of the u16 priv->phy_addr < 0 is always false because phy_addr is unsigned. Fix this by assigning the return from the call to function asix_read_phy_addr to int ret and using this for the less than zero error check comparison. Fixes: 7e88b11a ("net: usb: asix: refactor asix_read_phy_addr() and handle errors on return") Addresses-Coverity: ("Unsigned compared against 0") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The comparison of the u16 priv->phy_addr < 0 is always false because phy_addr is unsigned. Fix this by assigning the return from the call to function asix_read_phy_addr to int ret and using this for the less than zero error check comparison. Addresses-Coverity: ("Unsigned compared against 0") Fixes: e532a096 ("net: usb: asix: ax88772: add phylib support") Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Add nfgenmsg field to nfnetlink's struct nfnl_info and use it. 2) Remove nft_ctx_init_from_elemattr() and nft_ctx_init_from_setattr() helper functions. 3) Add the nf_ct_pernet() helper function to fetch the conntrack pernetns data area. 4) Expose TCP and UDP flowtable offload timeouts through sysctl, from Oz Shlomo. 5) Add nfnetlink_hook subsystem to fetch the netfilter hook pipeline configuration, from Florian Westphal. This also includes a new field to annotate the hook type as metadata. 6) Fix unsafe memory access to non-linear skbuff in the new SCTP chunk support for nft_exthdr, from Phil Sutter. ==================== Signed-off-by: -
Dan Carpenter authored
In normal situations where the driver doesn't dereference "nsim_node->ddir" or "nsim_node->rate_parent" itself then we are not supposed to check the return from debugfs functions. In the case of debugfs_create_dir() the check was wrong as well because it doesn't return NULL, it returns error pointers. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The WARN_ON() macro takes a condition, it doesn't take a message. Use WARN() instead. Fixes: 1897db2e ("devlink: Allow setting tx rate for devlink rate leaf objects") Signed-off-by:
-
Dan Carpenter authored
This code check "reg" but "ret" was intended so the error handling will never trigger. Fixes: 7c9896e3 ("net: dsa: qca8k: check return value of read functions correctly") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The "hi" variable is a u64 but the qca8k_read() writes to the top 32 bits of it. That will work on little endian systems but it's a bit subtle. It's cleaner to make declare "hi" as a u32. We will still need to cast it when we shift it later on in the function but that's fine. Fixes: 7c9896e3 ("net: dsa: qca8k: check return value of read functions correctly") Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: lapbether: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
According to the chackpatch.pl, line length of 123 exceeds 100 columns, so fix it. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
Alignment should match open parenthesis. Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, comparison to NULL could be written "lapbeth_get_x25_dev". Signed-off-by:
-
Peng Li authored
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
This patch removes unnecessary out of memory message, to fix the following checkpatch.pl warning: "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by:
-
Peng Li authored
This patch removes trailing whitespaces. Signed-off-by:
-
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch the redundant blank line. Signed-off-by:
-
Baokun Li authored
Using list_move_tail() instead of list_del() + list_add_tail() in hclge_main.c. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Baokun Li <libaokun1@huawei.com> Signed-off-by:
-
Baokun Li authored
Using list_move_tail() instead of list_del() + list_add_tail() in hclgevf_main.c. Reported-by:
-
Baokun Li authored
Using list_move() instead of list_del() + list_add() in nfp_cppcore.c. Reported-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
gushengxian authored
Fix a mistake in grammar. Signed-off-by:
gushengxian <gushengxian@yulong.com> Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Commit ca893194 ("net: dsa: b53: Keep CPU port as tagged in all VLANs") forced the CPU port to be always tagged in any VLAN membership. This was necessary back then because we did not support Broadcom tags for all configurations so the only way to differentiate tagged and untagged traffic while DSA_TAG_PROTO_NONE was used was to force the CPU port into being always tagged. With most configurations enabling Broadcom tags, especially after 8fab459e ("net: dsa: b53: Enable Broadcom tags for 531x5/539x families") we do not need to apply this unconditional force tagging of the CPU port in all VLANs. A helper function is introduced to faciliate the encapsulation of the specific condition requiring the CPU port to be tagged in all VLANs and the dsa_switch_ops::untag_bridge_pvid boolean is moved to when dsa_switch_ops::setup is called when we have already determined the tagging protocol we will be using. Reported-by:
Matthew Hagan <mnhagan88@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Florian Westphal authored
coverity scanner says: 2187 if (nft_is_base_chain(chain)) { vvv CID 1505166: Memory - corruptions (UNINIT) vvv Using uninitialized value "basechain". 2188 basechain->ops.hook_ops_type = NF_HOOK_OP_NF_TABLES; ... I don't see how nft_is_base_chain() can evaluate to true while basechain pointer is garbage. However, it seems better to place the NF_HOOK_OP_NF_TABLES annotation in nft_basechain_hook_init() instead. Reported-by:coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1505166 ("Memory - corruptions") Fixes: 65b8b7bfc5284f ("netfilter: annotate nf_tables base hook ops") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
nfnetlink_hook.c: In function 'nfnl_hook_put_nft_chain_info': nfnetlink_hook.c:76:7: error: implicit declaration of 'nft_is_active' This macro is only defined when NF_TABLES is enabled. While its possible to also add an ifdef-guard, the infrastructure is currently not useful without nf_tables. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 252956528caa ("netfilter: add new hook nfnl subsystem") Suggested-by:
-
Colin Ian King authored
Currently the array net->nf.hooks_ipv6 is accessed by index hook before hook is sanity checked. Fix this by moving the sanity check to before the array access. Addresses-Coverity: ("Out-of-bounds access") Fixes: e2cf17d3 ("netfilter: add new hook nfnl subsystem") Signed-off-by: -
gushengxian authored
Fix some mistakes in grammar. Signed-off-by:
-
Phil Sutter authored
While iterating through an SCTP packet's chunks, skb_header_pointer() is called for the minimum expected chunk header size. If (that part of) the skbuff is non-linear, the following memcpy() may read data past temporary buffer '_sch'. Use skb_copy_bits() instead which does the right thing in this situation. Fixes: 133dc203 ("netfilter: nft_exthdr: Support SCTP chunks") Suggested-by:
Phil Sutter <phil@nwl.cc> Reviewed-by:
-
- 08 Jun, 2021 10 commits
-
-
Matthew Hagan authored
We are currently assuming that GMAC_AHB_RESET will already be deasserted by the bootloader. However if this has not been done, probing of the GMAC will fail. To remedy this we must ensure GMAC_AHB_RESET has been deasserted prior to probing. v2 changes: - remove NULL condition check for stmmac_ahb_rst in stmmac_main.c - unwrap dev_err() message in stmmac_main.c - add PTR_ERR() around plat->stmmac_ahb_rst in stmmac_platform.c v3 changes: - add error pointer to dev_err() output - add reset_control_assert(stmmac_ahb_rst) in stmmac_dvr_remove - revert PTR_ERR() around plat->stmmac_ahb_rst since this is performed on the returned value of ret by the calling function Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() and devm_platform_ioremap_resource_byname to simplify code. Signed-off-by:
-
Vladimir Oltean authored
Instead of relying on the static initialization done by ocelot_init_port() which enables flow control unconditionally, set SYS_PAUSE_CFG_PAUSE_ENA according to the parameters negotiated by the PHY. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Wang Hai authored
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Wang Hai authored
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by:
-
Vladimir Oltean authored
priv->plat->mdio_bus_data is optional, some platforms may not set it, however we proceed to look straight at priv->plat->mdio_bus_data->has_xpcs. Since the xpcs is instantiated based on the has_xpcs property, we can avoid looking at the priv->plat->mdio_bus_data structure altogether and just check for the presence of the xpcs pointer. Fixes: 11059740 ("net: pcs: xpcs: convert to phylink_pcs_ops") Reported-by:
-
Wang Hai authored
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by:
-
Wang Hai authored
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by:
-
Wang Hai authored
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by:
-
