- 04 Aug, 2015 11 commits
-
-
Aleksei Mamlin authored
[ Upstream commit 08c85d2a ] Enabling AA on HP 250GB SATA disk VB0250EAVER causes errors: [ 3.788362] ata3.00: failed to enable AA (error_mask=0x1) [ 3.789243] ata3.00: failed to enable AA (error_mask=0x1) Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk. tj: Collected FPDMA_AA entries and updated comment. Signed-off-by:
Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Dan Carpenter authored
[ Upstream commit 474ff0ae ] My static checker complains that: sound/soc/fsl/imx-wm8962.c:196 imx_wm8962_probe() warn: we tested 'ret' before and it was 'false' The intent was that we use "ret" to check imx_audmux_v2_configure_port(). Fixes: 8de2ae2a ('ASoC: fsl: add imx-wm8962 machine driver') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Otherwise, Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jan Leupold authored
[ Upstream commit 815983e9 ] The DT-Property "atmel,adc-startup-time" is stored in an u8 for a microsecond value. When trying to increase the value of STARTUP in Register AT91_ADC_MR some higher values can't be reached. Change the type in function parameter and private structure field from u8 to u32. Signed-off-by:
Jan Leupold <leupold@rsi-elektrotechnik.de> [nicolas.ferre@atmel.com: change commit message, increase u16 to u32 for startup time] Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Peter Meerwald authored
[ Upstream commit f451957d ] only SAMP_FREQ is writable Will lead to SAMP_FREQ being written by any attempt to write to the other exported attributes and hence a rather unexpected result! Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
JM Friedt authored
[ Upstream commit 09f4dcc9 ] The value sent on the SPI bus is shifted by an erroneous number of bits. The shift value was already computed in the iio_chan_spec structure and hence subtracting this argument to 16 yields an erroneous data position in the SPI stream. Signed-off-by:
JM Friedt <jmfriedt@femto-st.fr> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Michal Hocko authored
[ Upstream commit 7444a072 ] ext4_free_blocks is looping around the allocation request and mimics __GFP_NOFAIL behavior without any allocation fallback strategy. Let's remove the open coded loop and replace it with __GFP_NOFAIL. Without the flag the allocator has no way to find out never-fail requirement and cannot help in any way. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Eryu Guan authored
[ Upstream commit 8974fec7 ] Currently ext4_ind_migrate() doesn't correctly handle a file which contains a hole at the beginning of the file. This caused the migration to be done incorrectly, and then if there is a subsequent following delayed allocation write to the "hole", this would reclaim the same data blocks again and results in fs corruption. # assmuing 4k block size ext4, with delalloc enabled # skip the first block and write to the second block xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/ext4/testfile # converting to indirect-mapped file, which would move the data blocks # to the beginning of the file, but extent status cache still marks # that region as a hole chattr -e /mnt/ext4/testfile # delayed allocation writes to the "hole", reclaim the same data block # again, results in i_blocks corruption xfs_io -c "pwrite 0 4k" /mnt/ext4/testfile umount /mnt/ext4 e2fsck -nf /dev/sda6 ... Inode 53, i_blocks is 16, should be 8. Fix? no ... Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Eryu Guan authored
[ Upstream commit d6f123a9 ] Currently the check in ext4_ind_migrate() is not enough before doing the real conversion: a) delayed allocated extents could bypass the check on eh->eh_entries and eh->eh_depth This can be demonstrated by this script xfs_io -fc "pwrite 0 4k" -c "pwrite 8k 4k" /mnt/ext4/testfile chattr -e /mnt/ext4/testfile where testfile has two extents but still be converted to non-extent based file format. b) only extent length is checked but not the offset, which would result in data lose (delalloc) or fs corruption (nodelalloc), because non-extent based file only supports at most (12 + 2^10 + 2^20 + 2^30) blocks This can be demostrated by xfs_io -fc "pwrite 5T 4k" /mnt/ext4/testfile chattr -e /mnt/ext4/testfile sync If delalloc is enabled, dmesg prints EXT4-fs warning (device dm-4): ext4_block_to_path:105: block 1342177280 > max in inode 53 EXT4-fs (dm-4): Delayed block allocation failed for inode 53 at logical offset 1342177280 with max blocks 1 with error 5 EXT4-fs (dm-4): This should not happen!! Data will be lost If delalloc is disabled, e2fsck -nf shows corruption Inode 53, i_size is 5497558142976, should be 4096. Fix? no Fix the two issues by a) forcing all delayed allocation blocks to be allocated before checking eh->eh_depth and eh->eh_entries b) limiting the last logical block of the extent is within direct map Signed-off-by:
-
Lukas Czerner authored
[ Upstream commit 9705acd6 ] On delalloc enabled file system on invalidatepage operation in ext4_da_page_release_reservation() we want to clear the delayed buffer and remove the extent covering the delayed buffer from the extent status tree. However currently there is a bug where on the systems with page size > block size we will always remove extents from the start of the page regardless where the actual delayed buffers are positioned in the page. This leads to the errors like this: EXT4-fs warning (device loop0): ext4_da_release_space:1225: ext4_da_release_space: ino 13, to_free 1 with only 0 reserved data blocks This however can cause data loss on writeback time if the file system is in ENOSPC condition because we're releasing reservation for someones else delayed buffer. Fix this by only removing extents that corresponds to the part of the page we want to invalidate. This problem is reproducible by the following fio receipt (however I was only able to reproduce it with fio-2.1 or older. [global] bs=8k iodepth=1024 iodepth_batch=60 randrepeat=1 size=1m directory=/mnt/test numjobs=20 [job1] ioengine=sync bs=1k direct=1 rw=randread filename=file1:file2 [job2] ioengine=libaio rw=randwrite direct=1 filename=file1:file2 [job3] bs=1k ioengine=posixaio rw=randwrite direct=1 filename=file1:file2 [job5] bs=1k ioengine=sync rw=randread filename=file1:file2 [job7] ioengine=libaio rw=randwrite filename=file1:file2 [job8] ioengine=posixaio rw=randwrite filename=file1:file2 [job10] ioengine=mmap rw=randwrite bs=1k filename=file1:file2 [job11] ioengine=mmap rw=randwrite direct=1 filename=file1:file2 Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Signed-off-by:
-
Ezequiel Garcia authored
[ Upstream commit ea6055c4 ] Since commit 39a6ac11 ("spi/pl022: Devicetree support w/o platform data") the 'num-cs' parameter cannot be passed through platform data when probing with devicetree. Instead, it's a required devicetree property. Fix the binding documentation so the property is properly specified. Fixes: 39a6ac11 ("spi/pl022: Devicetree support w/o platform data") Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Sasha Levin authored
This reverts commit c215cf25. Signed-off-by:
-
- 21 Jul, 2015 14 commits
-
-
Sasha Levin authored
Signed-off-by: -
David Vrabel authored
[ Upstream commit db0e2aa47f0a45fc56592c25ad370f8836cbb128 ] Hypercalls submitted by user space tools via the privcmd driver can take a long time (potentially many 10s of seconds) if the hypercall has many sub-operations. A fully preemptible kernel may deschedule such as task in any upcall called from a hypercall continuation. However, in a kernel with voluntary or no preemption, hypercall continuations in Xen allow event handlers to be run but the task issuing the hypercall will not be descheduled until the hypercall is complete and the ioctl returns to user space. These long running tasks may also trigger the kernel's soft lockup detection. Add xen_preemptible_hcall_begin() and xen_preemptible_hcall_end() to bracket hypercalls that may be preempted. Use these in the privcmd driver. When returning from an upcall, call xen_maybe_preempt_hcall() which adds a schedule point if if the current task was within a preemptible hypercall. Since _cond_resched() can move the task to a different CPU, clear and set xen_in_preemptible_hcall around the call. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Nicolas Dichtel authored
The commit 984ff7a3 is an upstream backport. In fact, it depends on commit 395eea6c ("rtnetlink: delay RTM_DELLINK notification until after ndo_uninit()") which has not been backported in 3.18.y. Before commit 395eea6c, rollback_registered_many() uses rtmsg_ifinfo(). The call to this function is done with dev->reg_state set to NETREG_UNREGISTERING, thus testing this reg_state in rtmsg_ifinfo() is wrong. This patch partially reverts commit 984ff7a3. Fixes: 984ff7a3 ("rtnl/bond: don't send rtnl msg for unregistered iface") Reported-by:
Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Peter Hutterer authored
[ Upstream commit 7f2ca8b5 ] https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Cc: stable@vger.kernel.org Tested-by: tommy.gagnes@gmail.com Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Sasha Levin authored
This reverts commit e73268af. Seems like an incorrect merge on my end, will pick the upstream version again next. Signed-off-by:
-
Sasha Levin authored
This reverts commit ed7f7f14. Reverting from stable tree as fix was found to be buggy. New fix pending. Signed-off-by:
-
Fabian Frederick authored
[ Upstream commit e4f95517 ] Add last missing line in commit "cdd9eefd" ("fs/ufs: restore s_lock mutex") Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 514d748f ] Commit e4502c63 (ufs: deal with nfsd/iget races) made ufs create inodes with I_NEW flag set. However ufs_mkdir() never cleared this flag. Thus if someone ever tried to lookup the directory by inode number, he would deadlock waiting for I_NEW to be cleared. Luckily this mostly happens only if the filesystem is exported over NFS since otherwise we have the inode attached to dentry and don't look it up by inode number. In rare cases dentry can get freed without inode being freed and then we'd hit the deadlock even without NFS export. Fix the problem by clearing I_NEW before instantiating new directory inode. Fixes: e4502c63Reported-by:
-
Jan Kara authored
[ Upstream commit 12ecbb4b ] Commit e4502c63 (ufs: deal with nfsd/iget races) introduced unlock_new_inode() call into ufs_add_nondir(). However that function gets called also from ufs_link() which hands it already initialized inode and thus unlock_new_inode() complains. The problem is harmless but annoying. Fix the problem by opencoding necessary stuff in ufs_link() Fixes: e4502c63Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit c89d4319 ] commit ceeb0e5d upstream. Limit the mounts fs_fully_visible considers to locked mounts. Unlocked can always be unmounted so considering them adds hassle but no security benefit. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Radim Krčmář authored
[ Upstream commit 58382447 ] commit db138562 upstream. Legacy NMI watchdog didn't work after migration/resume, because vapics_in_nmi_mode was left at 0. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Cornelia Huck authored
[ Upstream commit 431dae77 ] Eric noticed problems with vhost-scsi and virtio-ccw: vhost-scsi complained about overwriting values in the config space, which was triggered by a broken implementation of virtio-ccw's config get/set routines. It was probably sheer luck that we did not hit this before. When writing a value to the config space, the WRITE_CONF ccw will always write from the beginning of the config space up to and including the value to be set. If the config space up to the value has not yet been retrieved from the device, however, we'll end up overwriting values. Keep track of the known config space and update if needed to avoid this. Moreover, READ_CONF will only read the number of bytes it has been instructed to retrieve, so we must not copy more than that to the buffer, or we might overwrite trailing values. Reported-by:
Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit 9fc2b4b4 ] Before calling into the filesystem, vfs_setxattr calls security_inode_setxattr, which ends up calling selinux_inode_setxattr in our case. That returns -EOPNOTSUPP whenever SBLABEL_MNT is not set. SBLABEL_MNT was supposed to be set by sb_finish_set_opts, which sets it only if selinux_is_sblabel_mnt returns true. The selinux_is_sblabel_mnt logic was broken by eadcabc6 "SELinux: do all flags twiddling in one place", which didn't take into the account the SECURITY_FS_USE_NATIVE behavior that had been introduced for nfs with eb9ae686 "SELinux: Add new labeling type native labels". This caused setxattr's of security labels over NFSv4.2 to fail. Cc: stable@kernel.org # 3.13 Cc: Eric Paris <eparis@redhat.com> Cc: David Quigley <dpquigl@davequigley.com> Reported-by:
Richard Chan <rc556677@outlook.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> [PM: added the stable dependency] Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Rui Miguel Silva authored
[ Upstream commit f14e9ad1 ] ffs_closed can race with configfs_rmdir which will call config_item_release, so add an extra check to avoid calling the unregister_gadget_item with an null gadget item. Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
- 13 Jul, 2015 15 commits
-
-
Palik, Imre authored
[ Upstream commit 2c33645d ] Architectural performance monitoring, version 1, doesn't support fixed counters. Currently, even if a hypervisor advertises support for architectural performance monitoring version 1, perf may still try to use the fixed counters, as the constraints are set up based on the CPU model. This patch ensures that perf honors the architectural performance monitoring version returned by CPUID, and it only uses the fixed counters for version 2 and above. (Some of the ideas in this patch came from Peter Zijlstra.) Signed-off-by:
Imre Palik <imrep@amazon.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Anthony Liguori <aliguori@amazon.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1433767609-1039-1-git-send-email-imrep.amz@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Oleg Nesterov authored
[ Upstream commit 2f993cf0 ] While looking for other users of get_state/cond_sync. I Found ring_buffer_attach() and it looks obviously buggy? Don't we need to ensure that we have "synchronize" _between_ list_del() and list_add() ? IOW. Suppose that ring_buffer_attach() preempts right_after get_state_synchronize_rcu() and gp completes before spin_lock(). In this case cond_synchronize_rcu() does nothing and we reuse ->rb_entry without waiting for gp in between? It also moves the ->rcu_pending check under "if (rb)", to make it more readable imo. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit 04c17341 ] When building the kernel with 32-bit binutils built with support only for the i386 target, we get the following warning: arch/x86/kernel/head_32.S:66: Warning: shift count out of range (32 is not between 0 and 31) The problem is that in that case, binutils' internal type representation is 32-bit wide and the shift range overflows. In order to fix this, manipulate the shift expression which creates the 4GiB constant to not overflow the shift count. Suggested-by:
Michael Matz <matz@suse.de> Reported-and-tested-by:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 93e3bce6 ] The warning message in prepend_path is unclear and outdated. It was added as a warning that the mechanism for generating names of pseudo files had been removed from prepend_path and d_dname should be used instead. Unfortunately the warning reads like a general warning, making it unclear what to do with it. Remove the warning. The transition it was added to warn about is long over, and I added code several years ago which in rare cases causes the warning to fire on legitimate code, and the warning is now firing and scaring people for no good reason. Cc: stable@vger.kernel.org Reported-by:
Ivan Delalande <colona@arista.com> Reported-by:
Omar Sandoval <osandov@osandov.com> Fixes: f48cfddc ("vfs: In d_path don't call d_dname on a mount point") Signed-off-by:
-
Radim Krčmář authored
[ Upstream commit 42720138 ] Writes were a bit racy, but hard to turn into a bug at the same time. (Particularly because modern Linux doesn't use this feature anymore.) Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 85e84ba3 ] On VM entry, we disable access to the VFP registers in order to perform a lazy save/restore of these registers. On VM exit, we restore access, test if we did enable them before, and save/restore the guest/host registers if necessary. In this sequence, the FPEXC register is always accessed, irrespective of the trapping configuration. If the guest didn't touch the VFP registers, then the HCPTR access has now enabled such access, but we're missing a barrier to ensure architectural execution of the new HCPTR configuration. If the HCPTR access has been delayed/reordered, the subsequent access to FPEXC will cause a trap, which we aren't prepared to handle at all. The same condition exists when trapping to enable VFP for the guest. The fix is to introduce a barrier after enabling VFP access. In the vmexit case, it can be relaxed to only takes place if the guest hasn't accessed its view of the VFP registers, making the access to FPEXC safe. The set_hcptr macro is modified to deal with both vmenter/vmexit and vmtrap operations, and now takes an optional label that is branched to when the guest hasn't touched the VFP registers. Reported-by:
Vikram Sethi <vikrams@codeaurora.org> Cc: stable@kernel.org # v3.9+ Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Joerg Roedel authored
[ Upstream commit 0b3fff54 ] Make sure that we are skipping over large PTEs while walking the page-table tree. Cc: stable@kernel.org Fixes: 5c34c403 ("iommu/amd: Fix memory leak in free_pagetable") Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Geoff Levand authored
[ Upstream commit 286fb1cc ] Some of the macros defined in kvm_arm.h are useful in assembly files, but are not compatible with the assembler. Change any C language integer constant definitions using appended U, UL, or ULL to the UL() preprocessor macro. Also, add a preprocessor include of the asm/memory.h file which defines the UL() macro. Fixes build errors like these when using kvm_arm.h in assembly source files: Error: unexpected characters following instruction at operand 3 -- `and x0,x1,#((1U<<25)-1)' Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Bandan Das authored
[ Upstream commit f104765b ] If hardware doesn't support DecodeAssist - a feature that provides more information about the intercept in the VMCB, KVM decodes the instruction and then updates the next_rip vmcb control field. However, NRIP support itself depends on cpuid Fn8000_000A_EDX[NRIPS]. Since skip_emulated_instruction() doesn't verify nrip support before accepting control.next_rip as valid, avoid writing this field if support isn't present. Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
-
Sebastien Szymanski authored
[ Upstream commit 3a3ac04f ] commit da946aea upstream. According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg. Signed-off-by:
Sebastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> [dirk.behme: Adjust moved file] Signed-off-by:
Dirk Behme <dirk.behme@gmail.com> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit 02590fd8 ] commit 5f5bc6b1 upstream. Replacing a xattr consists of doing a lookup for its existing value, delete the current value from the respective leaf, release the search path and then finally insert the new value. This leaves a time window where readers (getxattr, listxattrs) won't see any value for the xattr. Xattrs are used to store ACLs, so this has security implications. This change also fixes 2 other existing issues which were: *) Deleting the old xattr value without verifying first if the new xattr will fit in the existing leaf item (in case multiple xattrs are packed in the same item due to name hash collision); *) Returning -EEXIST when the flag XATTR_CREATE is given and the xattr doesn't exist but we have have an existing item that packs muliple xattrs with the same name hash as the input xattr. In this case we should return ENOSPC. A test case for xfstests follows soon. Thanks to Alexandre Oliva for reporting the non-atomicity of the xattr replace implementation. Reported-by:
Alexandre Oliva <oliva@gnu.org> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Quentin Casasnovas authored
[ Upstream commit f84598bd ] mc_saved_tmp is a static array allocated on the stack, we need to make sure mc_saved_count stays within its bounds, otherwise we're overflowing the stack in _save_mc(). A specially crafted microcode header could lead to a kernel crash or potentially kernel execution. Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1422964824-22056-1-git-send-email-quentin.casasnovas@oracle.comSigned-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit d6b6cb1d ] If there's an existing base chain, we have to allow to change the default policy without indicating the hook information. However, if the chain doesn't exists, we have to enforce the presence of the hook attribute. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 749177cc ] ip6tables extensions check for this flag to restrict match/target to a given protocol. Without this flag set, SYNPROXY6 returns an error. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Ian Wilson authored
[ Upstream commit 78146572 ] nfnl_cthelper_parse_tuple() is called from nfnl_cthelper_new(), nfnl_cthelper_get() and nfnl_cthelper_del(). In each case they pass a pointer to an nf_conntrack_tuple data structure local variable: struct nf_conntrack_tuple tuple; ... ret = nfnl_cthelper_parse_tuple(&tuple, tb[NFCTH_TUPLE]); The problem is that this local variable is not initialized, and nfnl_cthelper_parse_tuple() only initializes two fields: src.l3num and dst.protonum. This leaves all other fields with undefined values based on whatever is on the stack: tuple->src.l3num = ntohs(nla_get_be16(tb[NFCTH_TUPLE_L3PROTONUM])); tuple->dst.protonum = nla_get_u8(tb[NFCTH_TUPLE_L4PROTONUM]); The symptom observed was that when the rpc and tns helpers were added then traffic to port 1536 was being sent to user-space. Signed-off-by:
Ian Wilson <iwilson@brocade.com> Signed-off-by:
-
