- 24 Jun, 2017 1 commit
-
-
Markus Elfring authored
Seven single characters (line breaks) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 23 Jun, 2017 17 commits
-
-
Kieran Bingham authored
Drivers must not perform unbalanced calls to stop the entity pipeline, however if they do they will fault in the core media code, as the entity->pipe will be set as NULL. We handle this gracefully in the core with a WARN for the developer. Replace the erroneous check on zero streaming counts, with a check on NULL pipe elements instead, as this is the symptom of unbalanced media_pipeline_stop calls. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pincharts@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
Unfortunately the use of 'type' was inconsistent for multiplanar buffer types. Starting with 4.13 both the normal and _MPLANE variants are allowed, thus making it possible to write sensible code. Yes, we messed up :-( Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
-
Hans Verkuil authored
The type field in struct v4l2_selection is supposed to never use the _MPLANE variants. E.g. if the driver supports V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, then userspace should still pass V4L2_BUF_TYPE_VIDEO_CAPTURE. The reasons for this are lost in the mists of time, but it is really annoying. In addition, the exynos drivers didn't follow this rule and instead expected the _MPLANE type. To fix that code is added to the v4l2 core that maps the _MPLANE buffer types to their regular equivalents before calling the driver. Effectively this allows for userspace to use either _MPLANE or the regular buffer type. This keeps backwards compatibility while making things easier for userspace. Since drivers now never see the _MPLANE buffer types the exynos drivers had to be adapted as well. Signed-off-by:
-
Helen Fornazier authored
Declare vimc_sen_video_ops as static, remove warning from sparse tool Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Helen Fornazier authored
Implement scaler and integrated with the core Signed-off-by:
-
Helen Fornazier authored
Implement the debayer filter and integrate it with the core Signed-off-by:
-
Helen Fornazier authored
Change the core structure for adding subdevices in the topology. Instead of calling the specific create function for each subdevice, inject a child platform_device with the driver's name. Each type of node in the topology (sensor, capture, debayer, scaler) will register a platform_driver with the corresponding name through the component subsystem. Implementing a new subdevice type doesn't require vimc-core to be altered. This facilitates future implementation of dynamic entities, where hotpluging an entity in the topology is just a matter of registering/unregistering a platform_device in the system. It also facilitates other implementations of different nodes without touching the core code and remove the need of a header file for each type of node. Signed-off-by:
-
Helen Fornazier authored
Allow user space to change the image format as the frame size, the pixel format, colorspace, quantization, field YCbCr encoding and the transfer function Signed-off-by:
-
Helen Fornazier authored
Allow user space to change the image format as the frame size, the media bus pixel format, colorspace, quantization, field YCbCr encoding and the transfer function Signed-off-by:
-
Helen Fornazier authored
Colorimetry value will always be checked in the same way. Adding a helper macro for that Signed-off-by:
-
Helen Fornazier authored
All links will be checked in the same way. Adding a helper function for that Signed-off-by:
-
Helen Fornazier authored
Move the vimc_cap_pipeline_s_stream from the vimc-cap.c to vimc-common.c as this core will be reused by other subdevices to activate the stream in their directly connected nodes Signed-off-by:
-
Helen Fornazier authored
As all the subdevices in the topology will be initialized in the same way, to avoid code repetition the vimc_ent_sd_{register, unregister} helper functions were created Signed-off-by: -
Helen Fornazier authored
Remove helper functions from vimc-core and add it in vimc-common to clean up the core. Signed-off-by:
-
Helen Fornazier authored
Initialize the test pattern generator on the sensor Generate a colored bar image instead of a grey one Signed-off-by:
-
Jacopo Mondi authored
Commit e7890297 ("i2c: sh_mobile: don't send a stop condition by default inside transfers") makes the i2c_sh_mobile I2C-adapter emit a stop/start sequence between messages in a single transfer only when explicitly requested with I2C_M_STOP. This breaks the ov772x driver in the SH4 Migo-R board as the Omnivision sensor uses the I2C-like SCCB protocol that doesn't support repeated starts: i2c-sh_mobile i2c-sh_mobile.0: Transfer request timed out ov772x 0-0021: Product ID error 92:92 Fix it by marking the client as SCCB, forcing the emission of a stop/start sequence between all messages. As I2C_M_STOP requires the I2C adapter to support protocol mangling, ensure that the I2C_FUNC_PROTOCOL_MANGLING functionality is available. Tested on SH4 Migo-R board, with OV772x now successfully probing soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0 ov772x 0-0021: ov7725 Product ID 77:21 Manufacturer ID 7f:a2 Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Suggested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
-
Mauro Carvalho Chehab authored
Since 2015, the documentation for FE_DISEQC_SEND_BURST, FE_SET_TONE and FE_SET_VOLTAGE are incorrectly saying that the enums are passed by reference. They aren't: they're passed by value. Fix the documentation to reflect reality. Fixes: 81959d99 ("[media] DocBook: better document FE_DISEQC_SEND_BURST ioctl") Fixes: d6b6d346 ("[media] DocBook: better document FE_SET_VOLTAGE ioctl") Fixes: 6dc59e7a ("[media] DocBook: better document FE_SET_TONE ioctl") Reported-by:
Thierry Lelegard <thierry.lelegard@free.fr> Signed-off-by:
-
- 20 Jun, 2017 22 commits
-
-
Arnd Bergmann authored
'struct video_event' is used for the VIDEO_GET_EVENT ioctl, implemented by drivers/media/pci/ivtv/ivtv-ioctl.c and drivers/media/pci/ttpci/av7110_av.c. The structure contains a 'time_t', which will be redefined in the future to be 64-bit wide, causing an incompatible ABI change for this ioctl. As it turns out, neither of the drivers currently sets the timestamp field, and it is presumably useless anyway because of the limited resolutions (no sub-second times). This means we can simply change the structure definition to use a 'long' instead of 'time_t' and remain compatible with all existing user space binaries when time_t gets changed. If anybody ever starts using this field, they have to make sure not to use 1970 based seconds in there, as those overflow in 2038. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stanimir Varbanov authored
We want all media drivers to build with COMPILE_TEST, as the Coverity instance we use on Kernel works only for x86. Also, our test workflow relies on it, in order to identify git bisect breakages. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org>
-
Antti Palosaari authored
Move power-up and power-down functionality to init/sleep ops and get rid of old function. Fixes and simplifies power-up functionality slightly. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Refactor firmware download routine. Signed-off-by:
-
Antti Palosaari authored
We need to wait 2nd demod power-up before download firmware. Move that wait to more correct location. Signed-off-by:
-
Antti Palosaari authored
Removed register writes are already chip defaults, are not required, are set later or belong to AF9015 USB interface. Signed-off-by:
-
Antti Palosaari authored
On serial TS mode output pin could be selected from D0 or D7. Add configuration option to for it. Rename TS mode config option prefix from AF9013_TS_ to AF9013_TS_MODE_. Signed-off-by:
-
Antti Palosaari authored
It needs to be enabled in order to get stream from slave af9013 demod. Signed-off-by:
-
Antti Palosaari authored
* fix write+read when write has more than one byte * remove lock, not needed on that case * remove useless i2c msg send loop, as we support only write, read and write+read as one go and nothing more Signed-off-by:
-
Antti Palosaari authored
Add support for DVBv5 CNR. Signed-off-by:
-
Antti Palosaari authored
Use typical (return 0/goto err/return err) error handling everywhere. Add missing error handling where missing. Signed-off-by:
-
Antti Palosaari authored
Use regmap for register access. Own low level i2c read and write routines for regmap is still needed because chip uses single command byte in addition to typical i2c register access. Signed-off-by:
-
Antti Palosaari authored
We can simplify logging as we now have a proper i2c client to pass for kernel dev_* logging functions. Signed-off-by:
-
Antti Palosaari authored
Replace own binary division with 64-bit multiply and division. Signed-off-by:
-
Antti Palosaari authored
Add kernel i2c driver bindings. That allows dev_* logging, regmap and more. Signed-off-by:
-
Antti Palosaari authored
It shorten, as typed chars, access to config values as there is one pointer less. Also, when config/platform data is passed to driver there could be some values that are not relevant to store state as such or not needed to store at all. Signed-off-by:
-
Antti Palosaari authored
Driver was using wrong "8-bit" i2c addresses for demods and tuners. Internal demod i2c address was not set at all. These are needed to be fixed before proper i2c client binding is used. Signed-off-by:
-
Gustavo A. R. Silva authored
Check return value from call to af9013_wr_regs(), so in case of error print debug message and return. Addresses-Coverity-ID: 1227035 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Daniel Scheller authored
Adds hardware IDs for all Sony CXD-based Cine-cards and MaxA8 devices, also adds some other yet missing IDs like the Octopus V3, Octopus OEM and Octopus Mini, as well as cards with unknown/deleted sub-ids. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Daniel Scheller authored
Properly detect and attach Ports and Flex modules with the Sony CXD28xxER series demods. This makes newer Cine cards and most DuoFlex C/C2/T/T2 (or any combination of these systems) work, PCI IDs need to be added though. Note: This utilises the CXD2841ER demod driver, which requires the changes from this patch series to properly work. Without those changes, it won't function properly (if at all). Signed-off-by:
-
Daniel Scheller authored
Some Flex modules (mostly with anyof C/C2/T/T2 demods based on the Sony CXD28xxER series) are equipped with an interface named XO2 (which appears to be the Lattice MachXO2). Add functionality to detect such links and initialise them, so any tuner module with such an interface can be used. This also adds dummy detection for any possible connected module, telling the user it isn't supported at this very moment. Also adds i2c_io(), i2c_write() and i2c_write_reg(), all required for the XO2 handling functionality. Signed-off-by:
-
Daniel Scheller authored
This is a backport of the board control setup from the vendor provided dddvb driver package, which does additional device initialisation based on the board_control device info values. Also backports the TS quirk flags which is used to control setup and usage of the tuner modules soldered on the bridge cards (e.g. CineCTv7, CineS2 V7, MaxA8 and the likes). Functionality originates from ddbridge vendor driver. Permission for reuse and kernel inclusion was formally granted by Ralph Metzler <rjkm@metzlerbros.de>. Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
