In linux-next, IA64_MCA_RECOVERY uses the (new) function
make_task_dead(), which is not exported for use by modules.  Instead of
exporting it for one user, convert IA64_MCA_RECOVERY to be a bool
Kconfig symbol.

In a config file from "kernel test robot <lkp@intel.com>" for a
different problem, this linker error was exposed when
CONFIG_IA64_MCA_RECOVERY=m.

Fixes this build error:

  ERROR: modpost: "make_task_dead" [arch/ia64/kernel/mca_recovery.ko] undefined!

Link: https://lkml.kernel.org/r/20220124213129.29306-1-rdunlap@infradead.org
Fixes: 0e25498f ("exit: Add and use make_task_dead.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should unregister the table upon module unload otherwise something
horrible will happen when we load binfmt_misc module again.  Also note
that we should keep value returned by register_sysctl_mount_point() and
release it later, otherwise it will leak.

Also, per Christian's comment, to fully restore the old behavior that
won't break userspace the check(binfmt_misc_header) should be
eliminated.

To reproduce:
  modprobe binfmt_misc
  modprobe -r binfmt_misc
  modprobe binfmt_misc
  modprobe -r binfmt_misc
  modprobe binfmt_misc

resulting in

  modprobe: can't load module binfmt_misc (kernel/fs/binfmt_misc.ko): Cannot allocate memory

and an unhappy kernel:

  binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point
  binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point
  BUG: unable to handle page fault for address: fffffbfff8004802
  Call Trace:
    init_misc_binfmt+0x2d/0x1000 [binfmt_misc]

Link: https://lkml.kernel.org/r/20220124181812.1869535-2-ztong0001@gmail.com
Fixes: 3ba442d5 ("fs: move binfmt_misc sysctl to its own file")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Co-developed-by: Christian Brauner<brauner@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The CONFIG_SYSCTL=n stub returns the wrong type.

Fixes: ee9efac4 ("sysctl: add helper to register a sysctl mount point")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pci fixes from Bjorn Helgaas:

 - Fix compilation warnings in new mt7621 driver (Sergio Paracuellos)

 - Restore the sysfs "rom" file for VGA shadow ROMs, which was broken
   when converting "rom" to be a static attribute (Bjorn Helgaas)

* tag 'pci-v5.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/sysfs: Find shadow ROM before static attribute initialization
  PCI: mt7621: Remove unused function pcie_rmw()
  PCI: mt7621: Drop of_match_ptr() to avoid unused variable

Pull gpio fixes from Bartosz Golaszewski:
 "Two fixes for the gpio-simulator:

   - fix a bug with hogs not being set-up in gpio-sim when user-space
     sets the chip label to an empty string

   - include the gpio-sim documentation in the index"

* tag 'gpio-fixes-for-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: add doc file to index file
  gpio: sim: check the label length when setting up device properties

Pull char/misc driver fixes from Greg KH:
 "Here are two small char/misc driver fixes for 5.17-rc2 that fix some
  reported issues. They are:

   - fix up a merge issue in the at25.c driver that ended up dropping
     some lines in the driver. The removed lines ended being needed, so
     this restores it and the driver works again.

   - counter core fix where the wrong error was being returned, NULL
     should be the correct error for when memory is gone here, like the
     kmalloc() core does.

  Both of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  counter: fix an IS_ERR() vs NULL bug
  eeprom: at25: Restore missing allocation

Pull tty/serial driver fixes from Greg KH:
 "Here are some small bug fixes and reverts for reported problems with
  the tty core and drivers. They include:

   - revert the fifo use for the 8250 console mode. It caused too many
     regressions and problems, and had a bug in it as well. This is
     being reworked and should show up in a later -rc1 release, but it's
     not ready for 5.17

   - rpmsg tty race fix

   - restore the cyclades.h uapi header file. Turns out a compiler test
     suite used it for some unknown reason. Bring it back just for the
     parts that are used by the builder test so they continue to build.
     No functionality is restored as no one actually has this hardware
     anymore, nor is it really tested.

   - stm32 driver fixes

   - n_gsm flow control fixes

   - pl011 driver fix

   - rs485 initialization fix

  All of these have been in linux-next this week with no reported
  problems"

* tag 'tty-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  kbuild: remove include/linux/cyclades.h from header file check
  serial: core: Initialize rs485 RTS polarity already on probe
  serial: pl011: Fix incorrect rs485 RTS polarity on set_mctrl
  serial: stm32: fix software flow control transfer
  serial: stm32: prevent TDR register overwrite when sending x_char
  tty: n_gsm: fix SW flow control encoding/handling
  serial: 8250: of: Fix mapped region size when using reg-offset property
  tty: rpmsg: Fix race condition releasing tty port
  tty: Partially revert the removal of the Cyclades public API
  tty: Add support for Brainboxes UC cards.
  Revert "tty: serial: Use fifo in 8250 console driver"

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes for 5.17-rc2 that resolve a
  number of reported problems. These include:

   - typec driver fixes

   - xhci platform driver fixes for suspending

   - ulpi core fix

   - role.h build fix

   - new device ids

   - syzbot-reported bugfixes

   - gadget driver fixes

   - dwc3 driver fixes

   - other small fixes

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: Fix segmentation fault in cdns_lost_power function
  usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend
  usb: gadget: at91_udc: fix incorrect print type
  usb: dwc3: xilinx: Fix error handling when getting USB3 PHY
  usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode
  usb: xhci-plat: fix crash when suspend if remote wake enable
  usb: common: ulpi: Fix crash in ulpi_match()
  usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS
  ucsi_ccg: Check DEV_INT bit only when starting CCG4
  USB: core: Fix hang in usb_kill_urb by adding memory barriers
  usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge
  usb: typec: tcpm: Do not disconnect when receiving VSAFE0V
  usb: typec: tcpm: Do not disconnect while receiving VBUS off
  usb: typec: Don't try to register component master without components
  usb: typec: Only attempt to link USB ports if there is fwnode
  usb: typec: tcpci: don't touch CC line if it's Vconn source
  usb: roles: fix include/linux/usb/role.h compile issue

Pull block fixes from Jens Axboe:

 - NVMe pull request
      - add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs (Wu
        Zheng)
      - remove the unneeded ret variable in nvmf_dev_show (Changcheng
        Deng)

 - Fix for a hang regression introduced with a patch in the merge
   window, where low queue depth devices would not always get woken
   correctly (Laibin)

 - Small series fixing an IO accounting issue with bio backed dm devices
   (Mike, Yu)

* tag 'block-5.17-2022-01-28' of git://git.kernel.dk/linux-block:
  dm: properly fix redundant bio-based IO accounting
  dm: revert partial fix for redundant bio-based IO accounting
  block: add bio_start_io_acct_time() to control start_time
  blk-mq: Fix wrong wakeup batch configuration which will cause hang
  nvme-fabrics: remove the unneeded ret variable in nvmf_dev_show
  nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs
  blk-mq: fix missing blk_account_io_done() in error path
  block: fix memory leak in disk_register_independent_access_ranges

Pull io_uring fixes from Jens Axboe:
 "Just two small fixes this time:

   - Fix a bug that can lead to node registration taking 1 second, when
     it should finish much quicker (Dylan)

   - Remove an unused argument from a function (Usama)"

* tag 'io_uring-5.17-2022-01-28' of git://git.kernel.dk/linux-block:
  io_uring: remove unused argument from io_rsrc_node_alloc
  io_uring: fix bug in slow unregistering of nodes

Pull powerpc fixes from Michael Ellerman:

 - Fix VM debug warnings on boot triggered via __set_fixmap().

 - Fix a debug warning in the 64-bit Book3S PMU handling code.

 - Fix nested guest HFSCR handling with multiple vCPUs on Power9 or
   later.

 - Fix decrementer storm caused by a recent change, seen with some
   configs.

Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Fabiano Rosas, Maxime Bizon, Nicholas Piggin, and Sachin Sant.

* tag 'powerpc-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/interrupt: Fix decrementer storm
  KVM: PPC: Book3S HV Nested: Fix nested HFSCR being clobbered with multiple vCPUs
  powerpc/perf: Fix power_pmu_disable to call clear_pmi_irq_pending only if PMI is pending
  powerpc/fixmap: Fix VM debug warning on unmap

Pull arm64 fixes from Catalin Marinas:

 - Errata workarounds for Cortex-A510: broken hardware dirty bit
   management, detection code for the TRBE (tracing) bugs with the
   actual fixes going in via the CoreSight tree.

 - Cortex-X2 errata handling for TRBE (inheriting the workarounds from
   Cortex-A710).

 - Fix ex_handler_load_unaligned_zeropad() to use the correct struct
   members.

 - A couple of kselftest fixes for FPSIMD.

 - Silence the vdso "no previous prototype" warning.

 - Mark start_backtrace() notrace and NOKPROBE_SYMBOL.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: cpufeature: List early Cortex-A510 parts as having broken dbm
  kselftest/arm64: Correct logging of FPSIMD register read via ptrace
  kselftest/arm64: Skip VL_INHERIT tests for unsupported vector types
  arm64: errata: Add detection for TRBE trace data corruption
  arm64: errata: Add detection for TRBE invalid prohibited states
  arm64: errata: Add detection for TRBE ignored system register writes
  arm64: Add Cortex-A510 CPU part definition
  arm64: extable: fix load_unaligned_zeropad() reg indices
  arm64: Mark start_backtrace() notrace and NOKPROBE_SYMBOL
  arm64: errata: Update ARM64_ERRATUM_[2119858|2224489] with Cortex-X2 ranges
  arm64: Add Cortex-X2 CPU part definition
  arm64: vdso: Fix "no previous prototype" warning

Merge tag 'fixes-v5.17-lsm-ceph-null' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull security sybsystem fix from James Morris:
 "Fix NULL pointer crash in LSM via Ceph, from Vivek Goyal"

* tag 'fixes-v5.17-lsm-ceph-null' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security, lsm: dentry_init_security() Handle multi LSM registration

Pull documentation fixes from Jonathan Corbet:
 "A few documentation fixes for 5.17"

* tag 'docs-5.17-3' of git://git.lwn.net/linux:
  docs/vm: Fix typo in *harden*
  Documentation: arm: marvell: Extend Avanta list
  docs: fix typo in Documentation/kernel-hacking/locking.rst
  docs: Hook the RTLA documents into the kernel docs build

Record the start_time for a bio but defer the starting block core's IO
accounting until after IO is submitted using bio_start_io_acct_time().

This approach avoids the need to mess around with any of the
individual IO stats in response to a bio_split() that follows bio
submission.
Reported-by: Bud Brown <bubrown@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Depends-on: e45c47d1 ("block: add bio_start_io_acct_time() to control start_time")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-4-snitzer@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Reverts a1e1cb72 ("dm: fix redundant IO accounting for bios that
need splitting") because it was too narrow in scope (only addressed
redundant 'sectors[]' accounting and not ios, nsecs[], etc).

Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-3-snitzer@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

bio_start_io_acct_time() interface is like bio_start_io_acct() that
allows start_time to be passed in. This gives drivers the ability to
defer starting accounting until after IO is issued (but possibily not
entirely due to bio splitting).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-2-snitzer@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull SCSI fixes from James Bottomley:
 "Sixteen patches, mostly minor fixes and updates; however there are
  substantive driver bug fixes in pm8001, bnx2fc, zfcp, myrs and qedf"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: myrs: Fix crash in error case
  scsi: 53c700: Remove redundant assignment to pointer SCp
  scsi: ufs: Treat link loss as fatal error
  scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode()
  scsi: bfa: Remove useless DMA-32 fallback configuration
  scsi: hisi_sas: Remove useless DMA-32 fallback configuration
  scsi: 3w-sas: Remove useless DMA-32 fallback configuration
  scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()
  scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices
  scsi: pm8001: Fix bogus FW crash for maxcpus=1
  scsi: qedf: Change context reset messages to ratelimited
  scsi: qedf: Fix refcount issue when LOGO is received during TMF
  scsi: qedf: Add stag_work to all the vports
  scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()
  scsi: target: iscsi: Make sure the np under each tpg is unique
  scsi: elx: efct: Don't use GFP_KERNEL under spin lock

Pull EFI fixes from Ard Biesheuvel:

 - avoid UEFI v2.00+ runtime services on Apple Mac systems, as they have
   been reported to cause crashes, and most Macs claim to be EFI v1.10
   anyway

 - avoid a spurious boot time warning on arm64 systems with 64k pages

* tag 'efi-urgent-for-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: runtime: avoid EFIv2 runtime services on Apple x86 machines
  efi/libstub: arm64: Fix image check alignment at entry

A ceph user has reported that ceph is crashing with kernel NULL pointer
dereference. Following is the backtrace.

/proc/version: Linux version 5.16.2-arch1-1 (linux@archlinux) (gcc (GCC)
11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Thu, 20 Jan 2022
16:18:29 +0000
distro / arch: Arch Linux / x86_64
SELinux is not enabled
ceph cluster version: 16.2.7 (dd0603118f56ab514f133c8d2e3adfc983942503)

relevant dmesg output:
[   30.947129] BUG: kernel NULL pointer dereference, address:
0000000000000000
[   30.947206] #PF: supervisor read access in kernel mode
[   30.947258] #PF: error_code(0x0000) - not-present page
[   30.947310] PGD 0 P4D 0
[   30.947342] Oops: 0000 [#1] PREEMPT SMP PTI
[   30.947388] CPU: 5 PID: 778 Comm: touch Not tainted 5.16.2-arch1-1 #1
86fbf2c313cc37a553d65deb81d98e9dcc2a3659
[   30.947486] Hardware name: Gigabyte Technology Co., Ltd. B365M
DS3H/B365M DS3H, BIOS F5 08/13/2019
[   30.947569] RIP: 0010:strlen+0x0/0x20
[   30.947616] Code: b6 07 38 d0 74 16 48 83 c7 01 84 c0 74 05 48 39 f7 75
ec 31 c0 31 d2 89 d6 89 d7 c3 48 89 f8 31 d2 89 d6 89 d7 c3 0
f 1f 40 00 <80> 3f 00 74 12 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 31
ff
[   30.947782] RSP: 0018:ffffa4ed80ffbbb8 EFLAGS: 00010246
[   30.947836] RAX: 0000000000000000 RBX: ffffa4ed80ffbc60 RCX:
0000000000000000
[   30.947904] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[   30.947971] RBP: ffff94b0d15c0ae0 R08: 0000000000000000 R09:
0000000000000000
[   30.948040] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[   30.948106] R13: 0000000000000001 R14: ffffa4ed80ffbc60 R15:
0000000000000000
[   30.948174] FS:  00007fc7520f0740(0000) GS:ffff94b7ced40000(0000)
knlGS:0000000000000000
[   30.948252] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   30.948308] CR2: 0000000000000000 CR3: 0000000104a40001 CR4:
00000000003706e0
[   30.948376] Call Trace:
[   30.948404]  <TASK>
[   30.948431]  ceph_security_init_secctx+0x7b/0x240 [ceph
49f9c4b9bf5be8760f19f1747e26da33920bce4b]
[   30.948582]  ceph_atomic_open+0x51e/0x8a0 [ceph
49f9c4b9bf5be8760f19f1747e26da33920bce4b]
[   30.948708]  ? get_cached_acl+0x4d/0xa0
[   30.948759]  path_openat+0x60d/0x1030
[   30.948809]  do_filp_open+0xa5/0x150
[   30.948859]  do_sys_openat2+0xc4/0x190
[   30.948904]  __x64_sys_openat+0x53/0xa0
[   30.948948]  do_syscall_64+0x5c/0x90
[   30.948989]  ? exc_page_fault+0x72/0x180
[   30.949034]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   30.949091] RIP: 0033:0x7fc7521e25bb
[   30.950849] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00
00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 0
0 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 54 24 28 64 48 2b 14
25

Core of the problem is that ceph checks for return code from
security_dentry_init_security() and if return code is 0, it assumes
everything is fine and continues to call strlen(name), which crashes.

Typically SELinux LSM returns 0 and sets name to "security.selinux" and
it is not a problem. Or if selinux is not compiled in or disabled, it
returns -EOPNOTSUP and ceph deals with it.

But somehow in this configuration, 0 is being returned and "name" is
not being initialized and that's creating the problem.

Our suspicion is that BPF LSM is registering a hook for
dentry_init_security() and returns hook default of 0.

LSM_HOOK(int, 0, dentry_init_security, struct dentry *dentry,...)

I have not been able to reproduce it just by doing CONFIG_BPF_LSM=y.
Stephen has tested the patch though and confirms it solves the problem
for him.

dentry_init_security() is written in such a way that it expects only one
LSM to register the hook. Atleast that's the expectation with current code.

If another LSM returns a hook and returns default, it will simply return
0 as of now and that will break ceph.

Hence, suggestion is that change semantics of this hook a bit. If there
are no LSMs or no LSM is taking ownership and initializing security context,
then return -EOPNOTSUP. Also allow at max one LSM to initialize security
context. This hook can't deal with multiple LSMs trying to init security
context. This patch implements this new behavior.
Reported-by: Stephen Muth <smuth4@gmail.com>
Tested-by: Stephen Muth <smuth4@gmail.com>
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: <stable@vger.kernel.org> # 5.16.0
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>

Pull power management fixes from Rafael Wysocki:
 "These make the buffer handling in pm_show_wakelocks() more robust and
  drop an unused hibernation-related function.

  Specifics:

   - Make the buffer handling in pm_show_wakelocks() more robust by
     using sysfs_emit_at() in it to generate output (Greg
     Kroah-Hartman).

   - Drop register_nosave_region_late() which is not used (Amadeusz
     Sławiński)"

* tag 'pm-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: hibernate: Remove register_nosave_region_late()
  PM: wakeup: simplify the output logic of pm_show_wakelocks()

Pulltracing fixes from Steven Rostedt:

 - Limit mcount build time sorting to only those archs that we know it
   works for.

 - Fix memory leak in error path of histogram setup

 - Fix and clean up rel_loc array out of bounds issue

 - tools/rtla documentation fixes

 - Fix issues with histogram logic

* tag 'trace-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Don't inc err_log entry count if entry allocation fails
  tracing: Propagate is_signed to expression
  tracing: Fix smatch warning for do while check in event_hist_trigger_parse()
  tracing: Fix smatch warning for null glob in event_hist_trigger_parse()
  tools/tracing: Update Makefile to build rtla
  rtla: Make doc build optional
  tracing/perf: Avoid -Warray-bounds warning for __rel_loc macro
  tracing: Avoid -Warray-bounds warning for __rel_loc macro
  tracing/histogram: Fix a potential memory leak for kstrdup()
  ftrace: Have architectures opt-in for mcount build time sorting

Merge branch 'ucount-rlimit-fixes-for-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucount rlimit fix from Eric Biederman.

Make sure the ucounts have a reference to the user namespace it refers
to, so that users that themselves don't carry such a reference around
can safely use the ucount functions.

* 'ucount-rlimit-fixes-for-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucount:  Make get_ucount a safe get_user replacement

Merge tag 'rcu-urgent.2022.01.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "This fixes a brown-paper-bag bug in RCU tasks that causes things like
  BPF and ftrace to fail miserably on systems with non-power-of-two
  numbers of CPUs.

  It fixes a math error added in 7a30871b ("rcu-tasks: Introduce
  ->percpu_enqueue_shift for dynamic queue selection') during the v5.17
  merge window. This commit works correctly only on systems with a
  power-of-two number of CPUs, which just so happens to be the kind that
  rcutorture always uses by default.

  This pull request fixes the math so that things also work on systems
  that don't happen to have a power-of-two number of CPUs"

* tag 'rcu-urgent.2022.01.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu-tasks: Fix computation of CPU-to-list shift counts

Merge tag 'hyperv-fixes-signed-20220128' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Fix screen resolution for hyperv framebuffer (Michael Kelley)

 - Fix packet header accounting for balloon driver (Yanming Liu)

* tag 'hyperv-fixes-signed-20220128' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  video: hyperv_fb: Fix validation of screen resolution
  Drivers: hv: balloon: account for vmbus packet header in max_pkt_size

Pull kvm fixes from Paolo Bonzini:
 "Two larger x86 series:

   - Redo incorrect fix for SEV/SMAP erratum

   - Windows 11 Hyper-V workaround

  Other x86 changes:

   - Various x86 cleanups

   - Re-enable access_tracking_perf_test

   - Fix for #GP handling on SVM

   - Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID

   - Fix for ICEBP in interrupt shadow

   - Avoid false-positive RCU splat

   - Enable Enlightened MSR-Bitmap support for real

  ARM:

   - Correctly update the shadow register on exception injection when
     running in nVHE mode

   - Correctly use the mm_ops indirection when performing cache
     invalidation from the page-table walker

   - Restrict the vgic-v3 workaround for SEIS to the two known broken
     implementations

  Generic code changes:

   - Dead code cleanup"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
  KVM: eventfd: Fix false positive RCU usage warning
  KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use
  KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()
  KVM: nVMX: Rename vmcs_to_field_offset{,_table}
  KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER
  KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS
  selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP
  KVM: x86: add system attribute to retrieve full set of supported xsave states
  KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr
  selftests: kvm: move vm_xsave_req_perm call to amx_test
  KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time
  KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS
  KVM: x86: Keep MSR_IA32_XSS unchanged for INIT
  KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2}
  KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02
  KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest
  KVM: x86: Check .flags in kvm_cpuid_check_equal() too
  KVM: x86: Forcibly leave nested virt when SMM state is toggled
  KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments()
  KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real
  ...

Pull MIPS build fix from Thomas Bogendoerfer:
 "Fix for allmodconfig build"

* tag 'mips-fixes-5.17_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Fix build error due to PTR used in more places

Pull s390 fixes from Vasily Gorbik:

 - Fix loading of modules with lots of relocations and add a regression
   test for it.

 - Fix machine check handling for vector validity and guarded storage
   validity failures in KVM guests.

 - Fix hypervisor performance data to include z/VM guests with access
   control group set.

 - Fix z900 build problem in uaccess code.

 - Update defconfigs.

* tag 's390-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/hypfs: include z/VM guests with access control group set
  s390: update defconfigs
  s390/module: test loading modules with a lot of relocations
  s390/module: fix loading modules with a lot of relocations
  s390/uaccess: fix compile error
  s390/nmi: handle vector validity failures for KVM guests
  s390/nmi: handle guarded storage validity failures for KVM guests

Pull ceph fixes from Ilya Dryomov:
 "A ZERO_SIZE_PTR dereference fix from Xiubo and two fixes for async
  creates interacting with pool namespace-constrained OSD permissions
  from Jeff (marked for stable)"

* tag 'ceph-for-5.17-rc2' of git://github.com/ceph/ceph-client:
  ceph: set pool_ns in new inode layout for async creates
  ceph: properly put ceph_string reference after async create attempt
  ceph: put the requests/sessions when it fails to alloc memory

Versions of Cortex-A510 before r0p3 are affected by a hardware erratum
where the hardware update of the dirty bit is not correctly ordered.

Add these cpus to the cpu_has_broken_dbm list.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220125154040.549272-3-james.morse@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

The kernel test robot reports that commit c42ff46f ("ocfs2: simplify
subdirectory registration with register_sysctl()") is broken, and
results in kernel warning messages like

  sysctl table check failed: fs/ocfs2/nm Not a file
  sysctl table check failed: fs/ocfs2/nm No proc_handler
  sysctl table check failed: fs/ocfs2/nm bogus .mode 0555

and in fact this was already reported back in linux-next, but nobody
seems to have reacted to that report.  Possibly that original report
only ever made it to the lkp list.

The problem seems to be that the simplification didn't actually go far
enough, and should have converted the whole directory path to the final
sysctl file, rather than just the two first components.

So take that last step.

Fixes: c42ff46f ("ocfs2: simplify subdirectory registration with register_sysctl()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/all/20220128065310.GF8421@xsang-OptiPlex-9020/
Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/KQ2F6TPJWMDVEXJM4WTUC4DU3EH3YJVT/Tested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'trbe-cortex-a510-errata' of gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux into for-next/fixes

coresight: trbe: Workaround Cortex-A510 erratas

This pull request is providing arm64 definitions to support
TRBE Cortex-A510 erratas.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

* tag 'trbe-cortex-a510-errata' of gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux:
  arm64: errata: Add detection for TRBE trace data corruption
  arm64: errata: Add detection for TRBE invalid prohibited states
  arm64: errata: Add detection for TRBE ignored system register writes
  arm64: Add Cortex-A510 CPU part definition

Pull fsnotify fixes from Jan Kara:
 "Fixes for userspace breakage caused by fsnotify changes ~3 years ago
  and one fanotify cleanup"

* tag 'fsnotify_for_v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: fix fsnotify hooks in pseudo filesystems
  fsnotify: invalidate dcache before IN_DELETE event
  fanotify: remove variable set but not used

Pull udf and quota fixes from Jan Kara:
 "Fixes for crashes in UDF when inode expansion fails and one quota
  cleanup"

* tag 'fs_for_v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: cleanup double word in comment
  udf: Restore i_lenAlloc when inode expansion fails
  udf: Fix NULL ptr deref when converting from inline format

Merge tag 'kvmarm-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.17, take #1

- Correctly update the shadow register on exception injection when
  running in nVHE mode

- Correctly use the mm_ops indirection when performing cache invalidation
  from the page-table walker

- Restrict the vgic-v3 workaround for SEIS to the two known broken
  implementations

Fix the following false positive warning:
 =============================
 WARNING: suspicious RCU usage
 5.16.0-rc4+ #57 Not tainted
 -----------------------------
 arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 3 locks held by fc_vcpu 0/330:
  #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm]
  #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm]
  #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm]

 stack backtrace:
 CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x44/0x57
  kvm_notify_acked_gsi+0x6b/0x70 [kvm]
  kvm_notify_acked_irq+0x8d/0x180 [kvm]
  kvm_ioapic_update_eoi+0x92/0x240 [kvm]
  kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm]
  handle_apic_eoi_induced+0x3d/0x60 [kvm_intel]
  vmx_handle_exit+0x19c/0x6a0 [kvm_intel]
  vcpu_enter_guest+0x66e/0x1860 [kvm]
  kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm]
  kvm_vcpu_ioctl+0x38a/0x6f0 [kvm]
  __x64_sys_ioctl+0x89/0xc0
  do_syscall_64+0x3a/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu),
kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact,
kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it
a false positive warning. So use hlist_for_each_entry_srcu() instead of
hlist_for_each_entry_rcu().
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Hyper-V TLFS explicitly forbids VMREAD and VMWRITE instructions when
Enlightened VMCS interface is in use:

"Any VMREAD or VMWRITE instructions while an enlightened VMCS is
active is unsupported and can result in unexpected behavior.""

Windows 11 + WSL2 seems to ignore this, attempts to VMREAD VMCS field
0x4404 ("VM-exit interruption information") are observed. Failing
these attempts with nested_vmx_failInvalid() makes such guests
unbootable.

Microsoft confirms this is a Hyper-V bug and claims that it'll get fixed
eventually but for the time being we need a workaround. (Temporary) allow
VMREAD to get data from the currently loaded Enlightened VMCS.

Note: VMWRITE instructions remain forbidden, it is not clear how to
handle them properly and hopefully won't ever be needed.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In preparation to allowing reads from Enlightened VMCS from
handle_vmread(), implement evmcs_field_offset() to get the correct
read offset. get_evmcs_offset(), which is being used by KVM-on-Hyper-V,
is almost what's needed but a few things need to be adjusted. First,
WARN_ON() is unacceptable for handle_vmread() as any field can (in
theory) be supplied by the guest and not all fields are defined in
eVMCS v1. Second, we need to handle 'holes' in eVMCS (missing fields).
It also sounds like a good idea to WARN_ON() if such fields are ever
accessed by KVM-on-Hyper-V.

Implement dedicated evmcs_field_offset() helper.

No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vmcs_to_field_offset{,_table} may sound misleading as VMCS is an opaque
blob which is not supposed to be accessed directly. In fact,
vmcs_to_field_offset{,_table} are related to KVM defined VMCS12 structure.

Rename vmcs_field_to_offset() to get_vmcs12_field_offset() for clarity.

No functional change intended.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Enlightened VMCS v1 doesn't have VMX_PREEMPTION_TIMER_VALUE field,
PIN_BASED_VMX_PREEMPTION_TIMER is also filtered out already so it makes
sense to filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER too.

Note, none of the currently existing Windows/Hyper-V versions are known
to enable 'save VMX-preemption timer value' when eVMCS is in use, the
change is aimed at making the filtering future proof.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220112170134.1904308-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>