Signed-off-by: Deepak Saxena <dsaxena@plexity.net>

into plexity.net:/home/dsaxena/src/linux-2.6-ixp2000

This is needed for certain systems (IXP2000,IXP1200) where the bootloader 
switches back to LE before jumping into the kernel or when we are trying
to boot a BE kernel from an LE bootloader.
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>

into plexity.net:/home/dsaxena/src/linux-2.5-bk

This code is a rework of the original Gladman AES code, and does not
include any supposed BSD licensed work by Jari Ruusu. 

Linus converted the Intel asm to Gas format, and made some minor
alterations.

Fruhwirth's glue module has also been retained, although I rebased the
table generation and key scheduling back to Gladman's code.  I've tested
this code with some standard FIPS test vectors, and large FTP transfers
over IPSec (both locally and over the wire to a system running the
generic AES implementation).
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

buffer without complaints.

*grrrrrrrr*

Wrong diff sent.  Sorry - normally the tree I'm working in is cp -rl'ed
from the -current, but right now it's a big mess.

This is the incremental fix.

This converts the 32-bit ppc htab code to use the seq_file interfaces.

Less code means fewer bugs..

This does the seq_file conversion + annotation + cleanup + race fixes
for arch/ppc64/kernel/rtas-proc.c.

How the fuck did that file manage to get anywhere near the tree, anyway?
Take a look at guy's "implementation" of sprintf(buf, "%04d", num), for
example:

<vomit>
	/* construct the sensor number like 0003 */
	/* fill with zeros */
	n = sprintf(tmp, "%d", s.token);
	len = strlen(tmp);
	while (strlen(tmp) < 4)
		n += sprintf (tmp+n, "0");

	/* invert the string */
	while (tmp[i]) {
		if (i<len)
			tmp2[4-len+i] = tmp[i];
		else
			tmp2[3-i] = tmp[i];
		i++;
	}
	tmp2[4] = '\0';
</vomit>

And it's full of that level of lusing ;-/

It would potentially remove dentries from the LRU list
without re-initializing the d_lru fields, causing later
accesses to that dentry to do bad things to the LRU list.

The following patch changes some 'unsigned long's into 'uint32_t's in
mktree (a program that runs on the host to frob the kernel image for
some firmwares).  Without it, the program is not correct when run
on/compiled on a 64bit host.
Signed-off-by: Dan Zink <dan.zink@hp.com>
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix bug #3125:

This should fix the problem; however, we will need to repeat that for all
PIO SCSI drivers (another immediate victim is ppa.c).

We should start looking for sane solution; I _really_ don't like the kludge
with using ->slave_alloc() for fixups after scsi_alloc_queue().
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

I just stumbled across this patch that's been sitting in my tree for ages.

I thought I'd sent this in before.  It's a trivial fix for the printing
of task state in /proc and sysrq dumps and such, so that TASK_DEAD shows
up correctly.  This state is pretty much only ever there to be seen when
there are exit/reaping bugs, but it's not like that hasn't come up.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from John Lenz

Add INITTIME macro to collie machine structure.

Patch from Ben Dooks

Fixed clock base for the H1940

thanks to Gerald Schneider <gerald@gerald-online.de>
for fixing this.

Patch from Ben Dooks

Patch for default configuration

Patch from Ben Dooks

Added more definitions for GPIO registers

New functions for modifying pin configuration and
bit-status (see include/asm-arm/arch-s3c2410/hardware.h)

Patch from Ben Dooks

Remove compile error with gcc-3.4 and empty part of case statememnt

Patch from Catalin Marinas

Gas translates the "msr [cs]psr, rN" instruction to "msr [cs]psr_cf, rN". This may cause problems on the ARMv6 architecture where the A and E bits can leak into the SVC mode from the USR mode via the exception handlers. The reverse can happen when returning to user mode. The patch adds _cxsf to all the msr instruction without the field specifier.

Patch from Catalin Marinas

The "err" is rotated in the blockops_check() function and all the error bits are cleared, the subsequent conditions being always true.

A number of drivers or special virtual devices really just want their
"read()" function to populate user space from some internal buffer.

This adds such a helper function - "simple_read_from_buffer()" - and
converts several ->read() instances to use it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into plexity.net:/home/dsaxena/src/linux-2.5-bk

For requests marked read-ahead, it can legitimately fail without it being a
path problem.  So don't fail a path just because this happens (can be the
atomic request allocation going nuts, for instance), or all paths will
quickly go away.

Cc: <neilb@cse.unsw.edu.au>
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I tried to get multipathing failover running and failed. It seems to be
that there are two bugs in multipath.c :

- If a path/request fails mp_bh->path doesn't get updated to the new
  path.  Thus multipath_end_request will access a NULL pointer if a
  redirected request returns.

- After fixing this I experienced several other errors.  First of all in
  bio->bi_flags the BIO_UPTODATE flag is not set when redirecting a
  request.

  Causing the md driver to think that every redirected request failed
  when it returns.  Since that alone didn't fix the problems, I simply
  copied the master_bio again and it looks like everything seems to work.

Cc: <neilb@cse.unsw.edu.au>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch reverts the i586 AES module.  A new one should be ready soon.
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into shinybook.infradead.org:/home/dwmw2/bk/mtd-2.6

one and turned on a few new options (some of which Altix needs).
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

nodes (configured for cell local memory) currently crashes because
MAX_NUMNODES defaults to 1.  The patch below sets up things to make this
work.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Initial patch by Jesse Barnes, fixed by Ken Chen, rescued from
obscurity by Sourav Sen.
Signed-off-by: Tony Luck <tony.luck@intel.com>

situation where a flood of errors prevents boot.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

into plexity.net:/home/dsaxena/src/linux-2.6-for-rmk

Mostly just removing empty pcibios_fixups[] arrays.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove pcibios_fixups[] array and move the declarations to live with
the implementations. Remove unneeded pcibios_name_device() on iSeries.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove pcibios_fixups[] from core code and declare the one fixup in
the same place it's implemented.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Good idea.  Following is ARM patch.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Remove the bazillion of pcibios_fixups[] arrays on MIPS and replace them
with DECLARE_PCI_FIXUP_HEADER / DECLARE_PCI_FIXUP_FINAL where the array
definition was non-empty.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Probably best to make i386 build again too... people bitch if their
favourite legacy architecture breaks.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>