It was not clear when exactly console_srcu_read_flags() must be
used vs. directly reading @console->flags.

Refactor and clarify that console_srcu_read_flags() is only
needed if the console is registered or the caller is in a
context where the registration status of the console may change
(due to another context).

The function requires the caller holds @console_srcu, which will
ensure that the caller sees an appropriate @flags value for the
registered console and that exit/cleanup routines will not run
if the console is in the process of unregistration.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-13-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

Introduce uart_port_set_cons() as a wrapper to set @cons of a
uart_port. The wrapper sets @cons under the port lock in order
to prevent @cons from disappearing while another context is
holding the port lock. This is necessary for a follow-up
commit relating to the port lock wrappers, which rely on @cons
not changing between lock and unlock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Théo Lebrun <theo.lebrun@bootlin.com> # EyeQ5, AMBA-PL011
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240820063001.36405-12-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

It will be necessary at times for the uart nbcon console
drivers to acquire the port lock directly (without the
additional nbcon functionality of the port lock wrappers).
These are special cases such as the implementation of the
device_lock()/device_unlock() callbacks or for internal
port lock wrapper synchronization.

Provide low-level variants __uart_port_lock_irqsave() and
__uart_port_unlock_irqrestore() for this purpose.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240820063001.36405-11-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

Console drivers typically have to deal with access to the
hardware via user input/output (such as an interactive login
shell) and output of kernel messages via printk() calls.

They use some classic driver-specific locking mechanism in most
situations. But console->write_atomic() callbacks, used by nbcon
consoles, are synchronized only by acquiring the console
context.

The synchronization via the console context ownership is possible
only when the console driver is registered. It is when a
particular device driver is connected with a particular console
driver.

The two synchronization mechanisms must be synchronized between
each other. It is tricky because the console context ownership
is quite special. It might be taken over by a higher priority
context. Also CPU migration must be disabled. The most tricky
part is to (dis)connect these two mechanisms during the console
(un)registration.

Use the driver-specific locking callbacks: device_lock(),
device_unlock(). They allow taking the device-specific lock
while the device is being (un)registered by the related console
driver.

For example, these callbacks lock/unlock the port lock for
serial port drivers.

Note that the driver-specific locking is only needed during
(un)register if it is an nbcon console with the write_atomic()
callback implemented. If write_atomic() is not implemented, the
driver should never attempt to access the hardware without
first acquiring its driver-specific lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-10-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

Console drivers typically must deal with access to the hardware
via user input/output (such as an interactive login shell) and
output of kernel messages via printk() calls. To provide the
necessary synchronization, usually some driver-specific locking
mechanism is used (for example, the port spinlock for uart
serial consoles).

Until now, usage of this driver-specific locking has been hidden
from the printk-subsystem and implemented within the various
console callbacks. However, nbcon consoles would need to use it
even in the generic code.

Add device_lock() and device_unlock() callback which will need
to get implemented by nbcon consoles.

The callbacks will use whatever synchronization mechanism the
driver is using for itself. The minimum requirement is to
prevent CPU migration. It would allow a context friendly
acquiring of nbcon console ownership in non-emergency and
non-panic context.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-9-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

The write_atomic() callback has special requirements and is
allowed to use special helper functions. Provide detailed
documentation of the callback so that a developer has a
chance of implementing it correctly.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-8-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

The return value of write_atomic() does not provide any useful
information. On the contrary, it makes things more complicated
for the caller to appropriately deal with the information.

Change write_atomic() to not have a return value. If the
message did not get printed due to loss of ownership, the
caller will notice this on its own. If ownership was not lost,
it will be assumed that the driver successfully printed the
message and the sequence number for that console will be
incremented.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-7-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

The functions nbcon_owner_matches() and nbcon_waiter_matches()
use a minimal set of data to determine if a context matches.
The existing kerneldoc and comments were not clear enough and
caused the printk folks to re-prove that the functions are
indeed reliable in all cases.

Update and expand the explanations so that it is clear that the
implementations are sufficient for all cases.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-6-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

Add validation that printk_deferred_enter()/_exit() are called in
non-migration contexts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-5-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

If a non-boot console is registering and boot consoles exist,
the consoles are flushed before being unregistered. This allows
the non-boot console to continue where the boot console left
off.

If for whatever reason flushing fails, the lowest seq found from
any of the enabled boot consoles is used. Until now con->seq was
checked. However, if it is an nbcon boot console, the function
nbcon_seq_read() must be used to read seq because con->seq is
not updated for nbcon consoles.

Check if it is an nbcon boot console and if so call
nbcon_seq_read() to read seq.

Also, avoid usage of con->seq as temporary storage of the
starting record. Instead, rename console_init_seq() to
get_init_console_seq() and just return the value. For nbcon
consoles set the sequence via nbcon_seq_force(), for legacy
consoles set con->seq.

The cleaned design should make sure that the value stays and is
set before the console is added to the console list. It also
unifies the sequence number initialization for legacy and nbcon
consoles.
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20240820063001.36405-4-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

Rather than splitting the nbcon allocation and initialization into
two pieces, perform all initialization in nbcon_alloc(). Later,
the initial sequence is calculated and can be explicitly set using
nbcon_seq_force(). This removes the need for the strong rules of
nbcon_init() that even included a BUG_ON().
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-3-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

kernel/printk/printk.c:284:5: sparse: sparse: context imbalance in
'console_srcu_read_lock' - wrong count at exit
include/linux/srcu.h:301:9: sparse: sparse: context imbalance in
'console_srcu_read_unlock' - unexpected unlock

Fixes: 6c4afa79 ("printk: Prepare for SRCU console list protection")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240820063001.36405-2-john.ogness@linutronix.deSigned-off-by: Petr Mladek <pmladek@suse.com>

Pull printk fix from Petr Mladek:

 - Do not block printk on non-panic CPUs when they are dumping
   backtraces

* tag 'printk-for-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk/panic: Allow cpu backtraces to be written into ringbuffer during panic

Merge tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are two driver fixes for regressions from 6.11-rc1 due to the
  driver core change making a structure in a driver core callback const.

  These were missed by all testing EXCEPT for what Bart happened to be
  running, so I appreciate the fixes provided here for some
  odd/not-often-used driver subsystems that nothing else happened to
  catch.

  Both of these fixes have been in linux-next all week with no reported
  issues"

* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  mips: sgi-ip22: Fix the build
  ARM: riscpc: ecard: Fix the build

Pull char / misc fixes from Greg KH:
 "Here are some small char/misc fixes for 6.11-rc4 to resolve reported
  problems. Included in here are:

   - fastrpc revert of a change that broke userspace

   - xillybus fixes for reported issues

  Half of these have been in linux-next this week with no reported
  problems, I don't know if the last bit of xillybus driver changes made
  it in, but they are 'obviously correct' so will be safe :)"

* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  char: xillybus: Check USB endpoints when probing device
  char: xillybus: Refine workqueue handling
  Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
  char: xillybus: Don't destroy workqueue from work item running on it

Pull tty / serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.11-rc4 to
  resolve some reported problems. Included in here are:

   - conmakehash.c userspace build issues

   - fsl_lpuart driver fix

   - 8250_omap revert for reported regression

   - atmel_serial rts flag fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
  tty: atmel_serial: use the correct RTS flag.
  tty: vt: conmakehash: remove non-portable code printing comment header
  tty: serial: fsl_lpuart: mark last busy before uart_add_one_port

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
  resolve some reported issues. Included in here are:

   - thunderbolt driver fixes for reported problems

   - typec driver fixes

   - xhci fixes

   - new device id for ljca usb driver

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
  usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
  Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
  usb: typec: ucsi: Fix the return value of ucsi_run_command()
  usb: xhci: fix duplicate stall handling in handle_tx_event()
  usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
  thunderbolt: Mark XDomain as unplugged when router is removed
  thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()

Pull more btrfs fixes from David Sterba:
 "A more fixes. We got reports that shrinker added in 6.10 still causes
  latency spikes and the fixes don't handle all corner cases. Due to
  summer holidays we're taking a shortcut to disable it for release
  builds and will fix it in the near future.

   - only enable extent map shrinker for DEBUG builds, temporary quick
     fix to avoid latency spikes for regular builds

   - update target inode's ctime on unlink, mandated by POSIX

   - properly take lock to read/update block group's zoned variables

   - add counted_by() annotations"

* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: only enable extent map shrinker for DEBUG builds
  btrfs: zoned: properly take lock to read/update block group's zoned variables
  btrfs: tree-checker: add dev extent item checks
  btrfs: update target inode's ctime on unlink
  btrfs: send: annotate struct name_cache_entry with __counted_by()

fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).

So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.

The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().

This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).

Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f25 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "16 hotfixes. All except one are for MM. 10 of these are cc:stable and
  the others pertain to post-6.10 issues.

  As usual with these merges, singletons and doubletons all over the
  place, no identifiable-by-me theme. Please see the lovingly curated
  changelogs to get the skinny"

* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/migrate: fix deadlock in migrate_pages_batch() on large folios
  alloc_tag: mark pages reserved during CMA activation as not tagged
  alloc_tag: introduce clear_page_tag_ref() helper function
  crash: fix riscv64 crash memory reserve dead loop
  selftests: memfd_secret: don't build memfd_secret test on unsupported arches
  mm: fix endless reclaim on machines with unaccepted memory
  selftests/mm: compaction_test: fix off by one in check_compaction()
  mm/numa: no task_numa_fault() call if PMD is changed
  mm/numa: no task_numa_fault() call if PTE is changed
  mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
  mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
  mm: don't account memmap per-node
  mm: add system wide stats items category
  mm: don't account memmap on failure
  mm/hugetlb: fix hugetlb vs. core-mm PT locking
  mseal: fix is_madv_discard()

Pull powerpc fixes from Michael Ellerman:

 - Fix crashes on 85xx with some configs since the recent hugepd rework.

 - Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
   platforms.

 - Don't enable offline cores when changing SMT modes, to match existing
   userspace behaviour.

Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.

* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/topology: Check if a core is online
  cpu/SMT: Enable SMT only if a core is online
  powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
  powerpc/mm: Fix size of allocated PGDIR
  soc: fsl: qbman: remove unused struct 'cgr_comp'

Pull smb client fixes from Steve French:

 - fix for clang warning - additional null check

 - fix for cached write with posix locks

 - flexible structure fix

* tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: smb2pdu.h: Use static_assert() to check struct sizes
  smb3: fix lock breakage for cached writes
  smb/client: avoid possible NULL dereference in cifs_free_subrequest()

Pull i2c fixes from Wolfram Sang:
 "I2C core fix replacing IS_ENABLED() with IS_REACHABLE()

  For host drivers, there are two fixes:

   - Tegra I2C Controller: Addresses a potential double-locking issue
     during probe. ACPI devices are not IRQ-safe when invoking runtime
     suspend and resume functions, so the irq_safe flag should not be
     set.

   - Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
     of the runtime_resume() function, which was missed in the previous
     release"

* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: tegra: Do not mark ACPI devices as irq safe
  i2c: Use IS_REACHABLE() for substituting empty ACPI functions
  i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume

Pull SCSI fixes from James Bottomley:
 "Two small fixes to the mpi3mr driver. One to avoid oversize
  allocations in tracing and the other to fix an uninitialized spinlock
  in the user to driver feature request code (used to trigger dumps and
  the like)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpi3mr: Avoid MAX_PAGE_ORDER WARNING for buffer allocations
  scsi: mpi3mr: Add missing spin_lock_init() for mrioc->trigger_lock

Pull xfs fixes from Chandan Babu:

 - Check for presence of only 'attr' feature before scrubbing an inode's
   attribute fork.

 - Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
   long (i.e. 50ms) sleep durations to prevent high load averages.

 - Do not allow users to change the realtime flag of a file unless the
   datadev and rtdev both support fsdax access modes.

* tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: conditionally allow FS_XFLAG_REALTIME changes if S_DAX is set
  xfs: revert AIL TASK_KILLABLE threshold
  xfs: attr forks require attr, not attr2

Pull bcachefs fixes from Kent OverstreetL

 - New on disk format version, bcachefs_metadata_version_disk_accounting_inum

   This adds one more disk accounting counter, which counts disk usage
   and number of extents per inode number. This lets us track
   fragmentation, for implementing defragmentation later, and it also
   counts disk usage per inode in all snapshots, which will be a useful
   thing to expose to users.

 - One performance issue we've observed is threads spinning when they
   should be waiting for dirty keys in the key cache to be flushed by
   journal reclaim, so we now have hysteresis for the waiting thread, as
   well as improving the tracepoint and a new time_stat, for tracking
   time blocked waiting on key cache flushing.

... and various assorted smaller fixes.

* tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs:
  bcachefs: Fix locking in __bch2_trans_mark_dev_sb()
  bcachefs: fix incorrect i_state usage
  bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru
  bcachefs: Fix forgetting to pass trans to fsck_err()
  bcachefs: Increase size of cuckoo hash table on too many rehashes
  bcachefs: bcachefs_metadata_version_disk_accounting_inum
  bcachefs: Kill __bch2_accounting_mem_mod()
  bcachefs: Make bkey_fsck_err() a wrapper around fsck_err()
  bcachefs: Fix warning in __bch2_fsck_err() for trans not passed in
  bcachefs: Add a time_stat for blocked on key cache flush
  bcachefs: Improve trans_blocked_journal_reclaim tracepoint
  bcachefs: Add hysteresis to waiting on btree key cache flush
  lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
  bcachefs: Convert for_each_btree_node() to lockrestart_do()
  bcachefs: Add missing downgrade table entry
  bcachefs: disk accounting: ignore unknown types
  bcachefs: bch2_accounting_invalid() fixup
  bcachefs: Fix bch2_trigger_alloc when upgrading from old versions
  bcachefs: delete faulty fastpath in bch2_btree_path_traverse_cached()

We run this in full RW mode now, so we have to guard against the
superblock buffer being reallocated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull memcg-v1 fix from Al Viro:
 "memcg_write_event_control() oops fix"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  memcg_write_event_control(): fix a user-triggerable oops

Pull arm64 fixes from Catalin Marinas:

 - Fix the arm64 __get_mem_asm() to use the _ASM_EXTABLE_##type##ACCESS()
   macro instead of the *_ERR() one in order to avoid writing -EFAULT to
   the value register in case of a fault

 - Initialise all elements of the acpi_early_node_map[] to NUMA_NO_NODE.
   Prior to this fix, only the first element was initialised

 - Move the KASAN random tag seed initialisation after the per-CPU areas
   have been initialised (prng_state is __percpu)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix KASAN random tag seed initialization
  arm64: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
  arm64: uaccess: correct thinko in __get_mem_asm()

Pull clk fix from Stephen Boyd:
 "One fix for the new T-Head TH1520 clk driver that marks a bus clk
  critical so that it isn't turned off during late init which breaks
  emmc-sdio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: thead: fix dependency on clk_ignore_unused

Pull block fixes from Jens Axboe:

 - Fix corruption issues with s390/dasd (Eric, Stefan)

 - Fix a misuse of non irq locking grab of a lock (Li)

 - MD pull request with a single data corruption fix for raid1 (Yu)

* tag 'block-6.11-20240824' of git://git.kernel.dk/linux:
  block: Fix lockdep warning in blk_mq_mark_tag_wait
  md/raid1: Fix data corruption for degraded array with slow disk
  s390/dasd: fix error recovery leading to data corruption on ESE devices
  s390/dasd: Remove DMA alignment

Pull io_uring fixes from Jens Axboe:

 - Fix a comment in the uapi header using the wrong member name (Caleb)

 - Fix KCSAN warning for a debug check in sqpoll (me)

 - Two more NAPI tweaks (Olivier)

* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
  io_uring: fix user_data field name in comment
  io_uring/sqpoll: annotate debug task == current with data_race()
  io_uring/napi: remove duplicate io_napi_entry timeout assignation
  io_uring/napi: check napi_enabled in io_napi_add() before proceeding

Pull devicetree fixes from Rob Herring:

 - Fix a possible (but unlikely) out-of-bounds read in interrupts
   parsing code

 - Add AT25 EEPROM "fujitsu,mb85rs256" compatible

 - Update Konrad Dybcio's email

* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of/irq: Prevent device address out-of-bounds read in interrupt map walk
  dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
  dt-bindings: Batch-update Konrad Dybcio's email

Although there are several patches improving the extent map shrinker,
there are still reports of too frequent shrinker behavior, taking too
much CPU for the kswapd process.

So let's only enable extent shrinker for now, until we got more
comprehensive understanding and a better solution.

Link: https://lore.kernel.org/linux-btrfs/3df4acd616a07ef4d2dc6bad668701504b412ffc.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/c30fd6b3-ca7a-4759-8a53-d42878bf84f7@gmail.com/
Fixes: 956a17d9 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull thermal control fix from Rafael Wysocki:
 "Fix a Bang-bang thermal governor issue causing it to fail to reset the
  state of cooling devices if they are 'on' to start with, but the
  thermal zone temperature is always below the corresponding trip point
  (Rafael Wysocki)"

* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: gov_bang_bang: Use governor_data to reduce overhead
  thermal: gov_bang_bang: Add .manage() callback
  thermal: gov_bang_bang: Split bang_bang_control()
  thermal: gov_bang_bang: Call __thermal_cdev_update() directly

Pull ACPI fix from Rafael Wysocki:
 "Fix an issue related to the ACPI EC device handling that causes the
  _REG control method to be evaluated for EC operation regions that are
  not expected to be used.

  This confuses the platform firmware and provokes various types of
  misbehavior on some systems (Rafael Wysocki)"

* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: EC: Evaluate _REG outside the EC scope more carefully
  ACPICA: Add a depth argument to acpi_execute_reg_methods()
  Revert "ACPI: EC: Evaluate orphan _REG under EC device"

Pull libnvdimm fix from Ira Weiny:
 "Commit f467fee4 ("block: move the dax flag to queue_limits") broke
  the DAX tests by skipping over the legacy pmem mapping pages case.

  Set the DAX flag in this case as well"

* tag 'libnvdimm-fixes-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm/pmem: Set dax flag for all 'PFN_MAP' cases

io_uring_cqe's user_data field refers to `sqe->data`, but io_uring_sqe
does not have a data field. Fix the comment to say `sqe->user_data`.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://github.com/axboe/liburing/pull/1206
Link: https://lore.kernel.org/r/20240816181526.3642732-1-csander@purestorage.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull rust fixes from Miguel Ojeda:

 - Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
   upstream Rust for the upcoming 1.82.0).

 - Fix support for the latest version of rust-analyzer due to a change
   on rust-analyzer config file semantics (considered a fix since most
   developers use the latest version of the tool, which is the only one
   actually supported by upstream). I am discussing stability of the
   config file with upstream -- they may be able to start versioning it.

 - Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
   libclang (bindgen).

 - A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
   suppress error messages in a foreign architecture chroot and to use a
   proper default format.

 - Clean 'rust-analyzer' target warning due to missing recursive make
   invocation mark.

 - Clean Clippy warning due to missing indentation in docs.

 - Clean LLVM 19 build warning due to removed 3dnow feature upstream.

* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
  rust: x86: remove `-3dnow{,a}` from target features
  kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
  rust: add intrinsics to fix `-Os` builds
  kbuild: rust: skip -fmin-function-alignment in bindgen flags
  rust: Support latest version of `rust-analyzer`
  rust: macros: indent list item in `module!`'s docs
  rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
  rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT