- 17 Oct, 2013 39 commits
-
-
Philipp Zabel authored
__setup_offsets fills the v4l2_planes' mem_offset fields, which is only valid for V4L2_MEMORY_MMAP type buffers. For V4L2_MEMORY_DMABUF and _USERPTR buffers, this incorrectly overwrites the fd and userptr fields. Reported-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Pawel Osciak <pawel@osciak.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Chanho Min authored
The pan/tilt absolute control value is signed value. If minimum value is minus, It will be changed to plus by clamp_t() as commit 64ae9958. ([media] uvcvideo: Fix control value clamping for unsigned integer controls). It leads to wrong setting of the control values. For example, when min and max are -36000 and 36000, the setting value between of this range is always 36000. So, its data type should be changed to signed. Signed-off-by:
Chanho Min <chanho.min@lge.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
drivers/media/pci/cx25821/cx25821-cards.c:49:20: warning: symbol 'cx25821_bcount' was not declared. Should it be static? drivers/media/pci/cx25821/cx25821-video-upstream.c:162:33: warning: incorrect type in assignment (different base types) drivers/media/pci/cx25821/cx25821-video-upstream.c:163:33: warning: incorrect type in assignment (different base types) drivers/media/pci/cx25821/cx25821-video-upstream.c:164:33: warning: incorrect type in assignment (different base types) drivers/media/pci/cx25821/cx25821-video-upstream.c:165:33: warning: incorrect type in assignment (different base types) drivers/media/pci/cx25821/cx25821-medusa-video.h:43:16: warning: symbol '_num_decoders' was not declared. Should it be static? drivers/media/pci/cx25821/cx25821-medusa-video.h:44:16: warning: symbol '_num_cameras' was not declared. Should it be static? drivers/media/pci/cx25821/cx25821-medusa-video.h:46:14: warning: symbol '_video_standard' was not declared. Should it be static? drivers/media/pci/cx25821/cx25821-medusa-video.h:47:5: warning: symbol '_display_field_cnt' was not declared. Should it be static? After analyzing the last four warnings carefully it became clear that these variables were really completely unused. As a result of that the call to medusa_set_decoderduration() is now dubious since the duration is always 0. Without documentation, however, I can't tell what the right value is. Signed-off-by:
-
Laurent Pinchart authored
struct v4l2_fh has an enum v4l2_priority field. Make sure the enum definition is available by including linux/videodev2.h. Signed-off-by:
-
Laurent Pinchart authored
v4l2-fh.h dereferences struct file, the structure must thus be defined. Pull in its definition by including linux/fs.h. Signed-off-by:
-
Sylwester Nawrocki authored
Remove the redundant 'const' qualifiers from the function signature and from the qmenu_int arrays' declarations. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
-
Frank Schaefer authored
Increase the streaming_users count only if streaming start succeeds. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
Fix CodingStyle on the GPIO init tables. Signed-off-by:
-
Alexey Khoroshilov authored
There are numerous issues in error handling code of cx231xx initialization. Double free (when cx231xx_init_dev() calls kfree(dev) via cx231xx_release_resources() and then cx231xx_usb_probe() does the same) and memory leaks (e.g. usb_get_dev() before (ifnum != 1) check in cx231xx_usb_probe()) are just a few of them. The patch fixes the issues in cx231xx_usb_probe() and cx231xx_init_dev() by moving usb_get_dev(interface_to_usbdev(interface)) below in code and implementing proper error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
module_pci_driver removes some boilerplate and makes code simpler. Signed-off-by:
-
Sachin Kamat authored
module_pci_driver removes some boilerplate and makes code simpler. Signed-off-by:
-
Sachin Kamat authored
module_pci_driver removes some boilerplate and makes code simpler. Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
-
Hans Verkuil authored
drivers/media/common/siano/smsdvb-main.c:47:5: warning: symbol 'sms_to_guard_interval_table' was not declared. Should it be static? drivers/media/common/siano/smsdvb-main.c:54:5: warning: symbol 'sms_to_code_rate_table' was not declared. Should it be static? drivers/media/common/siano/smsdvb-main.c:63:5: warning: symbol 'sms_to_hierarchy_table' was not declared. Should it be static? drivers/media/common/siano/smsdvb-main.c:70:5: warning: symbol 'sms_to_modulation_table' was not declared. Should it be static? drivers/media/common/siano/smscoreapi.c:925:35: warning: cast to restricted __le32 drivers/media/common/siano/smscoreapi.c:926:28: warning: cast to restricted __le32 Signed-off-by:
-
Hans Verkuil authored
drivers/media/usb/dvb-usb/az6027.c:257:23: warning: symbol 'az6027_stb0899_config' was not declared. Should it be static? drivers/media/usb/dvb-usb/az6027.c:294:23: warning: symbol 'az6027_stb6100_config' was not declared. Should it be static? Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb-frontends/drxk_hard.c:1086:62: warning: Using plain integer as NULL pointer drivers/media/dvb-frontends/drxk_hard.c:2784:63: warning: Using plain integer as NULL pointer Signed-off-by:
Antti Palosaari <crope@iki.fi> Reviewed-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb-frontends/drxd_hard.c:1017:70: warning: Using plain integer as NULL pointer drivers/media/dvb-frontends/drxd_hard.c:1038:69: warning: Using plain integer as NULL pointer drivers/media/dvb-frontends/drxd_hard.c:2836:33: warning: Using plain integer as NULL pointer drivers/media/dvb-frontends/drxd_hard.c:2972:30: warning: Using plain integer as NULL pointer Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb-frontends/cxd2820r_core.c:34:32: error: cannot size expression drivers/media/dvb-frontends/cxd2820r_core.c:68:32: error: cannot size expression Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
-
Lad, Prabhakar authored
Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Joe Perches authored
These aren't necessary after switch and while statements. Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Krzysztof Hałasa authored
Mask v4l2_buf.flags to indicate only I/P/B frames. Signed-off-by:
Krzysztof Ha?asa <khalasa@piap.pl> Signed-off-by:
-
- 15 Oct, 2013 1 commit
-
-
Hans Verkuil authored
drivers/media/usb/tlg2300/pd-main.c:235:25: warning: incorrect type in assignment (different base types) Signed-off-by:
-
