- 08 Dec, 2014 1 commit
-
-
James Bottomley authored
-
- 02 Dec, 2014 1 commit
-
-
Dan Carpenter authored
One of the two callers passes an unintialized pointer as "fmt" and expects it to be set to NULL if there is no format string. Let's make this function work as expected. Fixes: d811b848 ('scsi: use sdev as argument for sense code printing') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
- 01 Dec, 2014 2 commits
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Two i915 regressions and one dual-gpu laptop radeon fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails drm/i915: Cancel vdd off work before suspend drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
-
- 30 Nov, 2014 1 commit
-
-
Chris Mason authored
Don Bailey noticed that our page zeroing for compression at end-io time isn't complete. This reworks a patch from Linus to push the zeroing into the zlib and lzo specific functions instead of trying to handle the corners inside btrfs_decompress_buf2page Signed-off-by:
Chris Mason <clm@fb.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Reported-by:
Don A. Bailey <donb@securitymouse.com> cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 29 Nov, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Three fixlets from the ARM SoC camp: - correct irqdomain initialization for atmel-aic - correct error handling for device tree parsing in bcm controllers" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_map irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_map irqchip: atmel-aic: Fix irqdomain initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of ten fixes: 8 for UFS including four static checker warnings, a potential null deref in the voltage regulator code, a race on module unload, a ref counting fix on the well known LUNs which made it impossible to remove the ufs module and fix to correct the information in pwr_info. In addition to UFS, there's a blacklist for the Intel Multi-Flex array which chokes on report supported operation codes and a fix to an oops in bnx2fc caused by shared skbs" [ For us non-SCSI people: "UFS" here is "Universal Flash Storage" not the filesystem. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ufs: fix NULL dereference when no regulators are defined ufs: ensure clk gating work is finished before module unloading scsi: ufs: fix static checker warning in ufshcd_parse_clock_info scsi: ufs: fix static checker warning in __ufshcd_setup_clocks scsi: ufs: fix static checker warning in ufshcd_populate_vreg scsi: ufs: fix static checker errors in ufshcd_system_suspend ufs: fix power info after link start-up ufs: fix reference counting of W-LUs scsi: add Intel Multi-Flex to scsi scan blacklist bnx2fc: do not add shared skbs to the fcoe_rx_list
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are some staging and IIO driver fixes for 3.18-rc7 that resolve a number of reported issues, and a new device id for a staging wireless driver. All of these have been in linux-next" * tag 'staging-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Add new device ID for DLink GO-USB-N150 staging: r8188eu: Fix scheduling while atomic error introduced in commit fadbe0cd iio: accel: bmc150: set low default thresholds iio: accel: bmc150: Fix iio_event_spec direction iio: accel: bmc150: Send x, y and z motion separately iio: accel: bmc150: Error handling when mode set fails iio: gyro: bmg160: Fix iio_event_spec direction iio: gyro: bmg160: Send x, y and z motion separately iio: gyro: bmg160: Don't let interrupt mode to be open drain iio: gyro: bmg160: Error handling when mode set fails iio: adc: men_z188_adc: Add terminating entry for men_z188_ids iio: accel: kxcjk-1013: Fix kxcjk10013_set_range iio: Fix IIO_EVENT_CODE_EXTRACT_DIR bit mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fix from Greg KH: "Here is a single revert for the of-serial driver that resolves a reported issue. This revert has been in linux-next for a while" * tag 'tty-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: of-serial: add PM suspend/resume support"
-
- 28 Nov, 2014 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB driver fixes and new device ids for 3.18-rc7. Full details are in the shortlog, and all of these have been in the linux-next tree for a while" * tag 'usb-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000 usb: xhci: rework root port wake bits if controller isn't allowed to wakeup USB: xhci: Reset a halted endpoint immediately when we encounter a stall. Revert "xhci: clear root port wake on bits if controller isn't wake-up capable" USB: xhci: don't start a halted endpoint before its new dequeue is set USB: uas: Add no-uas quirk for Hitachi usb-3 enclosures 4971:1012 USB: ssu100: fix overrun-error reporting USB: keyspan: fix overrun-error reporting USB: keyspan: fix tty line-status reporting usb: serial: ftdi_sio: add PIDs for Matrix Orbital products usb: dwc3: ep0: fix for dead code USB: serial: cp210x: add IDs for CEL MeshConnect USB Stick
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds authored
Pull thermal fixes from Eduardo Valentin: "In this -rc still very minor changes: - Lee Jones fixes compilation warning in sti thermal driver - Marjus Elfring removes unnecessary checks in exynos thermal driver (as per coccinelle) - Now we always update cpufreq policies, and thus get (hopefully) always in sync with cpufreq, thanks to Yadwinder" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: Exynos: Deletion of unnecessary checks before two function calls thermal: sti: Ignore suspend/resume functions when !PM_SLEEP thermal: cpu_cooling: Update always cpufreq policy with thermal constraints
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "No excitement, here are only minor fixes: an endian fix for the new DSD format we added in 3.18, a fix for HP mute LED, and a fix for Native Instrument quirk" * tag 'sound-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: Add big-endian DSD sample formats and fix XMOS DSD sample format ALSA: hda - One more HP machine needs to change mute led quirk ALSA: usb-audio: Use snd_usb_ctl_msg() for Native Instruments quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Not much interesting going on fixes-wise for us this week, as it should be for an -rc7. I'm not expecting Olof to work much over Thanksgiving weekend, so I decided to take over again and push these out to you. Just four simple fixes this week: - one missing of_node_put() on armv7 based mvebu - forcing the USB host into the right mode on Chromebook (exynos5-snow) - enabling two important drivers for exynos_defconfig - fixing a noncritical bug for tegra that would cause a regression with common code patches queued for 3.19" * tag 'armsoc-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: irq: fix buggy usage of irq_data irq field ARM: exynos_defconfig: Enable max77802 rtc and clock drivers ARM: dts: Explicitly set dr_mode on exynos5250-snow ARM: mvebu: add missing of_node_put() call in coherency.c
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Another round of relatively small ARM fixes. Thomas spotted that the strex backoff delay bit was a disable bit, so it needed to be clear for this to work. Vladimir spotted that using a restart block for the cache flush operation would return -EINTR, which userspace was not expecting. Dmitry spotted that the auxiliary control register accesses for Xscale were not correct" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8226/1: cacheflush: get rid of restarting block ARM: 8222/1: mvebu: enable strex backoff delay ARM: 8216/1: xscale: correct auxiliary register in suspend/resume
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Two regression fixes from Ville. * tag 'drm-intel-fixes-2014-11-27' of git://anongit.freedesktop.org/drm-intel: drm/i915: Cancel vdd off work before suspend drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull mips fixes from Ralf Baechle: "The hopefully final round of fixes for 3.18: - Fix a number of build errors affecting particular configurations. - Handle EVA correctly when flushing a signal trampoline and dcache lines. - Fix printks printing jibberish. - Handle 64 bit memory addresses correctly when adding memory chunk on 32 bit kernels. - Fix a race condition in the hardware tablewalker code" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlers MIPS: Fix address type used for early memory detection. MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected. MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASE MIPS: Netlogic: handle modular AHCI builds MIPS: Netlogic: handle modular USB case MIPS: Loongson: Make platform serial setup always built-in. MIPS: fix EVA & non-SMP non-FPU FP context signal handling MIPS: cpu-probe: Set the FTLB probability bit on supported cores MIPS: BMIPS: Fix ".previous without corresponding .section" warnings MIPS: uaccess.h: Fix strnlen_user comment. MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line MIPS: Fix info about plat_setup in arch_mem_init comment MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.c MIPS: SEAD3: Fix LED device registration. MIPS: Fix a copy & paste error in unistd.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Here are five fixes for you to pull please. They're all CC'ed to stable except the "Fix PE state format" one which went in this release" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc: 32 bit getcpu VDSO function uses 64 bit instructions powerpc/powernv: Replace OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE powerpc/eeh: Fix PE state format powerpc/pseries: Fix endiannes issue in RTAS call from xmon powerpc/powernv: Fix the hmi event version check.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixlet from David Miller: "Aparc fix to add dma_cache_sync(), even if a nop it should be provided if dma_{alloc,free}_noncoherent() is provided too" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Add NOP dma_cache_sync() implementation.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Several small fixes here: 1) Don't crash in tg3 driver when the number of tx queues has been configured to be different from the number of rx queues. From Thadeu Lima de Souza Cascardo. 2) VLAN filter not disabled properly in promisc mode in ixgbe driver, from Vlad Yasevich. 3) Fix OOPS on dellink op in VTI tunnel driver, from Xin Long. 4) IPV6 GRE driver WCCP code checks skb->protocol for ETH_P_IP instead of ETH_P_IPV6, whoops. From Yuri Chislov. 5) Socket matching in ping driver is buggy when packet AF does not match socket's AF. Fix from Jane Zhou. 6) Fix checksum calculation errors in VXLAN due to where the udp_tunnel6_xmit_skb() helper gets it's saddr/daddr from. From Alexander Duyck. 7) Fix 5G detection problem in rtlwifi driver, from Larry Finger. 8) Fix NULL deref in tcp_v{4,6}_send_reset, from Eric Dumazet. 9) Various missing netlink attribute verifications in bridging code, from Thomas Graf. 10) tcp_recvmsg() unconditionally calls ipv4 ip_recv_error even for ipv6 sockets, whoops. Fix from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits) net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks bridge: Sanitize IFLA_EXT_MASK for AF_BRIDGE:RTM_GETLINK bridge: Add missing policy entry for IFLA_BRPORT_FAST_LEAVE net: Check for presence of IFLA_AF_SPEC net: Validate IFLA_BRIDGE_MODE attribute length bridge: Validate IFLA_BRIDGE_FLAGS attribute length stmmac: platform: fix default values of the filter bins setting net/mlx4_core: Limit count field to 24 bits in qp_alloc_res net: dsa: bcm_sf2: reset switch prior to initialization net: dsa: bcm_sf2: fix unmapping registers in case of errors tg3: fix ring init when there are more TX than RX channels tcp: fix possible NULL dereference in tcp_vX_send_reset() rtlwifi: Change order in device startup rtlwifi: rtl8821ae: Fix 5G detection problem Revert "netfilter: conntrack: fix race in __nf_conntrack_confirm against get_next_corpse" vxlan: Fix boolean flip in VXLAN_F_UDP_ZERO_CSUM6_[TX|RX] ip6_udp_tunnel: Fix checksum calculation net-timestamp: Fix a documentation typo net/ping: handle protocol mismatching scenario af_packet: fix sparse warning ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "There's a couple of driver fixes here, plus one core fix for the DMA mapping which wasn't doing the right thing for vmalloc()ed addresses that hadn't been through kmap(). It's fairly rare to use vmalloc() with SPI and it's a subset of those users who might fail so it's unsurprising that this wasn't noticed sooner" * tag 'spi-v3.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sirf: fix word width configuration spi: Fix mapping from vmalloc-ed buffer to scatter list spi: dw: Fix dynamic speed change.
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer fixes from Dmitry Torokhov: "The main change is to fix breakage in Elantech driver introduced by the recent commit adding trackpoint reporting to protocol v4. Now we are trusting the hardware to advertise the trackpoint properly and do not try to decode the data as trackpoint if firmware told us it is not present" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - use proper endpoint type Input: elantech - trust firmware about trackpoint presence Input: synaptics - adjust min/max on Thinkpad E540
-
- 27 Nov, 2014 10 commits
-
-
Larry Finger authored
The DLink GO-USB-N150 with revision B1 uses this driver. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leonid Yegoshin authored
There is a potential race when probing the TLB in TLBL/M/S exception handlers for a matching entry. Between the time we hit a TLBL/S/M exception and the time we get to execute the TLBP instruction, the HTW may have replaced the TLB entry we are interested in hence the TLB probe may fail. However, in the existing handlers, we never checked the status of the TLBP (ie check the result in the C0/Index register). We fix this by adding such a check when the core implements the HTW. If we couldn't find a matching entry, we return back and try again. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # v3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8599/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Vladimir Murzin authored
We cannot restart cacheflush safely if a process provides user-defined signal handler and signal is pending. In this case -EINTR is returned and it is expected that process re-invokes syscall. However, there are a few problems with that: * looks like nobody bothers checking return value from cacheflush * but if it did, we don't provide the restart address for that, so the process has to use the same range again * ...and again, what might lead to looping forever So, remove cacheflush restarting code and terminate cache flushing as early as fatal signal is pending. Cc: stable@vger.kernel.org # 3.12+ Reported-by:
Chanho Min <chanho.min@lge.com> Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Thomas Petazzoni authored
Under extremely rare conditions, in an MPCore node consisting of at least 3 CPUs, two CPUs trying to perform a STREX to data on the same shared cache line can enter a livelock situation. This patch enables the HW mechanism that overcomes the bug. This fixes the incorrect setup of the STREX backoff delay bit due to a wrong description in the specification. Note that enabling the STREX backoff delay mechanism is done by leaving the bit *cleared*, while the bit was currently being set by the proc-v7.S code. [Thomas: adapt to latest mainline, slightly reword the commit log, add stable markers.] Fixes: de490193 ("arm: mm: Add support for PJ4B cpu and init routines") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
Nadav Haklai <nadavh@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Pull "mvebu fixes for v3.18 (round 2)" frm Jason Cooper: - mvebu - coherency.c needed an of_node_put() * tag 'mvebu-fixes-3.18-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add missing of_node_put() call in coherency.c Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'samsung-defconfig-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung defconfig update for v3.18" from Kukjin Kim: - enable max77802 rtc and clock drivers for exynos_defconfig : enable the kernel config options to have the drivers for max77802 including rtc and 2-ch 32kHz clock outputs * tag 'samsung-defconfig-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable max77802 rtc and clock drivers Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'samsung-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung fixes for v3.18" from Kukjin Kim: - explicitly set dr_mode on exynos5250-snow this is required when kernel is built with USB gadget support. * tag 'samsung-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Explicitly set dr_mode on exynos5250-snow Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Marc Zyngier authored
The crazy gic_arch_extn thing that Tegra uses contains multiple references to the irq field in struct irq_data, and uses this to directly poke hardware register. But irq is the *virtual* irq number, something that has nothing to do with the actual HW irq (stored in the hwirq field). And once we put the stacked domain code in action, the whole thing explodes, as these two values are *very* different: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 25801 2075 GIC 29 twd 17: 0 0 GIC 73 timer0 112: 0 0 GPIO 58 c8000600.sdhci cd 123: 0 0 GPIO 69 c8000200.sdhci cd 279: 1126 0 GIC 122 serial 281: 0 0 GIC 70 7000c000.i2c 282: 0 0 GIC 116 7000c400.i2c 283: 0 0 GIC 124 7000c500.i2c 284: 300 0 GIC 85 7000d000.i2c [...] Just replacing all instances of irq with hwirq fixes the issue. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
one fix for PX laptops. * 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails
-
Alex Deucher authored
If ddc fails, presumably the i2c mux (and hopefully the signal mux) are switched to the other GPU so don't fetch the edid from the vbios so that the connector reports disconnected. bug: https://bugzilla.opensuse.org/show_bug.cgi?id=904417Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 26 Nov, 2014 9 commits
-
-
Anton Blanchard authored
I used some 64 bit instructions when adding the 32 bit getcpu VDSO function. Fix it. Fixes: 18ad51dd ("powerpc: Add VDSO version of getcpu") Cc: stable@vger.kernel.org Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
The flag passed to ioda_eeh_phb_reset() should be EEH_RESET_DEACTIVATE, which is translated to OPAL_DEASSERT_RESET or something else by the EEH backend accordingly. The patch replaces OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE for ioda_eeh_phb_reset(). Cc: stable@vger.kernel.org Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
Obviously I had wrong format given to the PE state output from /sys/bus/pci/devices/xxxx/eeh_pe_state with some typoes, which was introduced by commit 2013add4. The patch fixes it up. Fixes: 2013add4 ("powerpc/eeh: Show hex prefix for PE state sysfs") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Laurent Dufour authored
On pseries system (LPAR) xmon failed to enter when running in LE mode, system is hunging. Inititating xmon will lead to such an output on the console: SysRq : Entering xmon cpu 0x15: Vector: 0 at [c0000003f39ffb10] pc: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 lr: c00000000007ed7c: sysrq_handle_xmon+0x5c/0x70 sp: c0000003f39ffc70 msr: 8000000000009033 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash Bad kernel stack pointer fafb4b0 at eca7cc4 cpu 0x15: Vector: 300 (Data Access) at [c000000007f07d40] pc: 000000000eca7cc4 lr: 000000000eca7c44 sp: fafb4b0 msr: 8000000000001000 dar: 10000000 dsisr: 42000000 current = 0xc0000003fafa7180 paca = 0xc000000007d75e80 softe: 0 irq_happened: 0x01 pid = 14617, comm = bash cpu 0x15: Exception 300 (Data Access) in xmon, returning to main loop xmon: WARNING: bad recursive fault on cpu 0x15 The root cause is that xmon is calling RTAS to turn off the surveillance when entering xmon, and RTAS is requiring big endian parameters. This patch is byte swapping the RTAS arguments when running in LE mode. Cc: stable@vger.kernel.org Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Mahesh Salgaonkar authored
The current HMI event structure is an ABI and carries a version field to accommodate future changes without affecting/rearranging current structure members that are valid for previous versions. The current version check "if (hmi_evt->version != OpalHMIEvt_V1)" doesn't accomodate the fact that the version number may change in future. If firmware starts returning an HMI event with version > 1, this check will fail and no HMI information will be printed on older kernels. This patch fixes this issue. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> [mpe: Reword changelog] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Larry Finger authored
In commit fadbe0cd entitled "staging: rtl8188eu:Remove rtw_zmalloc(), wrapper for kzalloc()", the author failed to note that the original code in the wrapper tested whether the caller could sleep, and set the flags argument to kzalloc() appropriately. After the patch, GFP_KERNEL is used unconditionally. Unfortunately, several of the routines may be entered from an interrupt routine and generate a BUG splat for every such call. Routine rtw_sitesurvey_cmd() is used in the example below: BUG: sleeping function called from invalid context at mm/slub.c:1240 in_atomic(): 1, irqs_disabled(): 0, pid: 756, name: wpa_supplicant INFO: lockdep is turned off. CPU: 2 PID: 756 Comm: wpa_supplicant Tainted: G WC O 3.18.0-rc4+ #34 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 ffffc90005557000 ffff880216fafaa8 ffffffff816b0bbf 0000000000000000 ffff8800c3b58000 ffff880216fafac8 ffffffff8107af77 0000000000000001 0000000000000010 ffff880216fafb18 ffffffff811b06ce 0000000000000000 Call Trace: [<ffffffff816b0bbf>] dump_stack+0x4e/0x71 [<ffffffff8107af77>] __might_sleep+0xf7/0x120 [<ffffffff811b06ce>] kmem_cache_alloc_trace+0x4e/0x1f0 [<ffffffffa0888226>] ? rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu] [<ffffffffa0888226>] rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu] [<ffffffffa088f00d>] rtw_do_join+0x22d/0x370 [r8188eu] [<ffffffffa088f6e8>] rtw_set_802_11_ssid+0x218/0x3d0 [r8188eu] [<ffffffffa08c3ca5>] rtw_wx_set_essid+0x1e5/0x410 [r8188eu] [<ffffffffa08c3ac0>] ? rtw_wx_get_rate+0x50/0x50 [r8188eu] [<ffffffff816938f1>] ioctl_standard_iw_point+0x151/0x3f0 [<ffffffff81693d52>] ioctl_standard_call+0xb2/0xe0 [<ffffffff81597df7>] ? rtnl_lock+0x17/0x20 [<ffffffff816945a0>] ? iw_handler_get_private+0x70/0x70 [<ffffffff81693ca0>] ? call_commit_handler+0x40/0x40 [<ffffffff81693256>] wireless_process_ioctl+0x176/0x1c0 [<ffffffff81693e79>] wext_handle_ioctl+0x69/0xc0 [<ffffffff8159fe79>] dev_ioctl+0x309/0x5e0 [<ffffffff810be9c7>] ? call_rcu+0x17/0x20 [<ffffffff8156a472>] sock_ioctl+0x142/0x2e0 [<ffffffff811e0c70>] do_vfs_ioctl+0x300/0x520 [<ffffffff81101514>] ? __audit_syscall_entry+0xb4/0x110 [<ffffffff81101514>] ? __audit_syscall_entry+0xb4/0x110 [<ffffffff810102bc>] ? do_audit_syscall_entry+0x6c/0x70 [<ffffffff811e0f11>] SyS_ioctl+0x81/0xa0 [<ffffffff816ba1d2>] system_call_fastpath+0x12/0x17 Additional routines that generate this BUG are rtw_joinbss_cmd(), rtw_dynamic_chk_wk_cmd(), rtw_lps_ctrl_wk_cmd(), rtw_rpt_timer_cfg_cmd(), rtw_ps_cmd(), report_survey_event(), report_join_res(), survey_timer_hdl(), and rtw_check_bcn_info(). Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: navin patidar <navin.patidar@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2014-11-26 Please pull this little batch of fixes intended for the 3.18 stream... For the iwlwifi one, Emmanuel says: "Not all the firmware know how to handle the HOT_SPOT_CMD. Make sure that the firmware will know this command before sending it. This avoids a firmware crash." Along with that, Larry sends a pair of rtlwifi fixes to address some discrepancies from moving drivers out of staging. Larry says: "These two patches are needed to fix a regression introduced when driver rtl8821ae was moved from staging to the regular wireless tree." Please let me know if there are problems! ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This can be a NOP because we forward dma_{alloc,free}_noncoherent to dma_{alloc,free}_coherent. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
TCP timestamping introduced MSG_ERRQUEUE handling for TCP sockets. If the socket is of family AF_INET6, call ipv6_recv_error instead of ip_recv_error. This change is more complex than a single branch due to the loadable ipv6 module. It reuses a pre-existing indirect function call from ping. The ping code is safe to call, because it is part of the core ipv6 module and always present when AF_INET6 sockets are active. Fixes: 4ed2d765 (net-timestamp: TCP timestamping) Signed-off-by:
Willem de Bruijn <willemb@google.com> ---- It may also be worthwhile to add WARN_ON_ONCE(sk->family == AF_INET6) to ip_recv_error. Signed-off-by:
David S. Miller <davem@davemloft.net>
-