- 02 Jun, 2015 40 commits
-
-
Tejun Heo authored
This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
__wb_update_bandwidth() is called from two places - fs/fs-writeback.c::balance_dirty_pages() and mm/page-writeback.c::wb_writeback(). The latter updates only the write bandwidth while the former also deals with the dirty ratelimit. The two callsites are distinguished by whether @thresh parameter is zero or not, which is cryptic. In addition, the two files define their own different versions of wb_update_bandwidth() on top of __wb_update_bandwidth(), which is confusing to say the least. This patch cleans up [__]wb_update_bandwidth() in the following ways. * __wb_update_bandwidth() now takes explicit @update_ratelimit parameter to gate dirty ratelimit handling. * mm/page-writeback.c::wb_update_bandwidth() is flattened into its caller - balance_dirty_pages(). * fs/fs-writeback.c::wb_update_bandwidth() is moved to mm/page-writeback.c and __wb_update_bandwidth() is made static. * While at it, add a lockdep assertion to __wb_update_bandwidth(). Except for the lockdep addition, this is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
The function name wb_dirty_limit(), its argument @dirty and the local variable @wb_dirty are mortally confusing given that the function calculates per-wb threshold value not dirty pages, especially given that @dirty and @wb_dirty are used elsewhere for dirty pages. Let's rename the function to wb_calc_thresh() and wb_dirty to wb_thresh. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
cpu_possible_mask represents the CPUs which are actually possible during that boot instance. For systems which don't support CPU hotplug, this will match cpu_online_mask exactly in most cases. Even for systems which support CPU hotplug, the number of possible CPU slots is highly unlikely to diverge greatly from the number of online CPUs. The only cases where the difference between possible and online caused problems were when the boot code failed to initialize the possible mask and left it fully set at NR_CPUS - 1. As such, most per-cpu constructs allocate for all possible CPUs and often iterate over the possibles, which also has the benefit of avoiding the blocking CPU hotplug synchronization. memcg open codes per-cpu stat counting for mem_cgroup_read_stat() and mem_cgroup_read_events(), which iterates over online CPUs and handles CPU hotplug operations explicitly. This complexity doesn't actually buy anything. Switch to iterating over the possibles and drop the explicit CPU hotplug handling. Eventually, we want to convert memcg to use percpu_counter instead of its own custom implementation which also benefits from quick access w/o summing for cases where larger error margin is acceptable. This will allow mem_cgroup_read_stat() to be called from non-sleepable contexts which will be used by cgroup writeback. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Writeback now supports cgroup writeback and the generic writeback, buffer, libfs, and mpage helpers that ext2 uses are all updated to work with cgroup writeback. This patch enables cgroup writeback for ext2 by adding FS_CGROUP_WRITEBACK to its ->fs_flags. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: linux-ext4@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
__mpage_writepage() is used to implement mpage_writepages() which in turn is used for ->writepages() of various filesystems. All writeback logic is now updated to handle cgroup writeback and the block cgroup to issue IOs for is encoded in writeback_control and can be retrieved from the inode; however, __mpage_writepage() currently ignores the blkcg indicated by the inode and issues all bio's without explicit blkcg association. This patch updates __mpage_writepage() so that the issued bio's are associated with inode_to_writeback_blkcg_css(inode). v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
[__]block_write_full_page() is used to implement ->writepage in various filesystems. All writeback logic is now updated to handle cgroup writeback and the block cgroup to issue IOs for is encoded in writeback_control and can be retrieved from the inode; however, [__]block_write_full_page() currently ignores the blkcg indicated by inode and issues all bio's without explicit blkcg association. This patch adds submit_bh_blkcg() which associates the bio with the specified blkio cgroup before issuing and uses it in __block_write_full_page() so that the issued bio's are associated with inode_to_wb_blkcg_css(inode). v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
__mark_inode_dirty() always dirtied the inode against the root wb (bdi_writeback). The previous patches added all the infrastructure necessary to attribute an inode against the wb of the dirtying cgroup. This patch updates __mark_inode_dirty() so that it uses the wb associated with the inode instead of unconditionally using the root one. Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all pages will keep being dirtied against the root wb. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
[try_]writeback_inodes_sb[_nr]() and sync_inodes_sb() currently only handle dirty inodes on the root wb (bdi_writeback) of the target bdi. This patch implements bdi_split_work_to_wbs() and use it to make these functions handle multiple wb's. bdi_split_work_to_wbs() takes a base wb_writeback_work and create clones of it and issue them to the wb's of the target bdi. The base work's nr_pages is distributed using wb_split_bdi_pages() - ie. according to each wb's write bandwidth's proportion in the bdi. Cloning a bdi involves memory allocation which may fail. In such cases, bdi_split_work_to_wbs() issues the base work directly and waits for its completion before proceeding to the next wb to guarantee forward progress and correctness under memory pressure. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
try_writeback_inodes_sb_nr() wraps writeback_inodes_sb_nr() so that it handles s_umount locking and skips if writeback is already in progress. The in progress test is performed on the root wb (bdi_writeback) which isn't sufficient for cgroup writeback support. The test must be done per-wb. To prepare for the change, this patch factors out __writeback_inodes_sb_nr() from writeback_inodes_sb_nr() and adds @skip_if_busy and moves the in progress test right before queueing the wb_writeback_work. try_writeback_inodes_sb_nr() now just grabs s_umount and invokes __writeback_inodes_sb_nr() with asserted @skip_if_busy. This way, later addition of multiple wb handling can skip only the wb's which already have writeback in progress. This swaps the order between in progress test and s_umount test which can flip the return value when writeback is in progress and s_umount is being held by someone else but this shouldn't cause any meaningful difference. It's a fringe condition and the return value is an unsynchronized hint anyway. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
For cgroup writeback, multiple wb_writeback_work items may need to be issuedto accomplish a single task. The previous patch updated the waiting mechanism such that wb_wait_for_completion() can wait for multiple work items. Issuing mulitple work items involves memory allocation which may fail. As most writeback operations can't fail or blocked on memory allocation, in such cases, we'll fall back to sequential issuing of an on-stack work item, which would need to be waited upon sequentially. This patch implements wb_wait_for_single_work() which waits for a single work item independently from wb_completion waiting so that such fallback mechanism can be used without getting tangled with the usual issuing / completion operation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
If the completion of a wb_writeback_work can be waited upon by setting its ->done to a struct completion and waiting on it; however, for cgroup writeback support, it's necessary to issue multiple work items to multiple bdi_writebacks and wait for the completion of all. This patch implements wb_completion which can wait for multiple work items and replaces the struct completion with it. It can be defined using DEFINE_WB_COMPLETION_ONSTACK(), used for multiple work items and waited for by wb_wait_for_completion(). Nobody currently issues multiple work items and this patch doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Currently, a wb_writeback_work is freed automatically on completion if it doesn't have ->done set. Add wb_writeback_work->auto_free to make the switch explicit. This will help cgroup writeback support where waiting for completion and whether to free automatically don't necessarily move together. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
wakeup_dirtytime_writeback() currently only starts writeback on the root wb (bdi_writeback). For cgroup writeback support, update the function to check all wbs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
wakeup_flusher_threads() currently only starts writeback on the root wb (bdi_writeback). For cgroup writeback support, update the function to wake up all wbs and distribute the number of pages to write according to the proportion of each wb's write bandwidth, which is implemented in wb_split_bdi_pages(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
bdi_start_background_writeback() currently takes @bdi and kicks the root wb (bdi_writeback). In preparation for cgroup writeback support, make it take wb instead. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
writeback_in_progress() currently takes @bdi and returns whether writeback is in progress on its root wb (bdi_writeback). In preparation for cgroup writeback support, make it take wb instead. While at it, make it an inline function. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
For cgroup writeback support, all bdi-wide operations should be distributed to all its wb's (bdi_writeback's). This patch updates laptop_mode_timer_fn() so that it invokes wb_start_writeback() on all wb's rather than just the root one. As the intent is writing out all dirty data, there's no reason to split the number of pages to write. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
bdi_start_writeback() is a thin wrapper on top of __wb_start_writeback() which is used only by laptop_mode_timer_fn(). This patches removes bdi_start_writeback(), renames __wb_start_writeback() to wb_start_writeback() and makes laptop_mode_timer_fn() use it instead. This doesn't cause any functional difference and will ease making laptop_mode_timer_fn() cgroup writeback aware. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
This will be used to implement bdi-wide operations which should be distributed across all its cgroup bdi_writebacks. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
bdi->min/max_ratio are user-configurable per-bdi knobs which regulate dirty limit of each bdi. For cgroup writeback, they need to be further distributed across wb's (bdi_writeback's) belonging to the configured bdi. This patch introduces wb_min_max_ratio() which distributes bdi->min/max_ratio according to a wb's proportion in the total active bandwidth of its bdi. v2: Update wb_min_max_ratio() to fix a bug where both min and max were assigned the min value and avoid calculations when possible. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
There are several places in fs/fs-writeback.c which queues wb_writeback_work without checking whether the target wb (bdi_writeback) has dirty inodes or not. The only thing wb_writeback_work does is writing back the dirty inodes for the target wb and queueing a work item for a clean wb is essentially noop. There are some side effects such as bandwidth stats being updated and triggering tracepoints but these don't affect the operation in any meaningful way. This patch makes all writeback_inodes_sb_nr() and sync_inodes_sb() skip wb_queue_work() if the target bdi is clean. Also, it moves dirtiness check from wakeup_flusher_threads() to __wb_start_writeback() so that all its callers benefit from the check. While the overhead incurred by scheduling a noop work isn't currently significant, the overhead may be higher with cgroup writeback support as we may end up issuing noop work items to a lot of clean wb's. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
bdi_has_dirty_io() used to only reflect whether the root wb (bdi_writeback) has dirty inodes. For cgroup writeback support, it needs to take all active wb's into account. If any wb on the bdi has dirty inodes, bdi_has_dirty_io() should return true. To achieve that, as inode_wb_list_{move|del}_locked() now keep track of the dirty state transition of each wb, the number of dirty wbs can be counted in the bdi; however, bdi is already aggregating wb->avg_write_bandwidth which can easily be guaranteed to be > 0 when there are any dirty inodes by ensuring wb->avg_write_bandwidth can't dip below 1. bdi_has_dirty_io() can simply test whether bdi->tot_write_bandwidth is zero or not. While this bumps the value of wb->avg_write_bandwidth to one when it used to be zero, this shouldn't cause any meaningful behavior difference. bdi_has_dirty_io() is made an inline function which tests whether ->tot_write_bandwidth is non-zero. Also, WARN_ON_ONCE()'s on its value are added to inode_wb_list_{move|del}_locked(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
cgroup writeback support needs to keep track of the sum of avg_write_bandwidth of all wb's (bdi_writeback's) with dirty inodes to distribute write workload. This patch adds bdi->tot_write_bandwidth and updates inode_wb_list_move_locked(), inode_wb_list_del_locked() and wb_update_write_bandwidth() to adjust it as wb's gain and lose dirty inodes and its avg_write_bandwidth gets updated. As the update events are not synchronized with each other, bdi->tot_write_bandwidth is an atomic_long_t. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Currently, wb_has_dirty_io() determines whether a wb (bdi_writeback) has any dirty inode by testing all three IO lists on each invocation without actively keeping track. For cgroup writeback support, a single bdi will host multiple wb's each of which will host dirty inodes separately and we'll need to make bdi_has_dirty_io(), which currently only represents the root wb, aggregate has_dirty_io from all member wb's, which requires tracking transitions in has_dirty_io state on each wb. This patch introduces inode_wb_list_{move|del}_locked() to consolidate IO list operations leaving queue_io() the only other function which directly manipulates IO lists (via move_expired_inodes()). All three functions are updated to call wb_io_lists_[de]populated() which keep track of whether the wb has dirty inodes or not and record it using the new WB_has_dirty_io flag. inode_wb_list_moved_locked()'s return value indicates whether the wb had no dirty inodes before. mark_inode_dirty() is restructured so that the return value of inode_wb_list_move_locked() can be used for deciding whether to wake up the wb. While at it, change {bdi|wb}_has_dirty_io()'s return values to bool. These functions were returning 0 and 1 before. Also, add a comment explaining the synchronization of wb_state flags. v2: Updated to accommodate b_dirty_time. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
In several places, bdi_congested() and its wrappers are used to determine whether more IOs should be issued. With cgroup writeback support, this question can't be answered solely based on the bdi (backing_dev_info). It's dependent on whether the filesystem and bdi support cgroup writeback and the blkcg the inode is associated with. This patch implements inode_congested() and its wrappers which take @inode and determines the congestion state considering cgroup writeback. The new functions replace bdi_*congested() calls in places where the query is about specific inode and task. There are several filesystem users which also fit this criteria but they should be updated when each filesystem implements cgroup writeback support. v2: Now that a given inode is associated with only one wb, congestion state can be determined independent from the asking task. Drop @task. Spotted by Vivek. Also, converted to take @inode instead of @mapping and renamed to inode_congested(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Now that bdi layer can handle per-blkcg bdi_writeback_congested state, blk_{set|clear}_congested() can propagate non-root blkcg congestion state to them. This can be easily achieved by disabling the root_rl tests in blk_{set|clear}_congested(). Note that we still need those tests when !CONFIG_CGROUP_WRITEBACK as otherwise we'll end up flipping root blkcg wb's congestion state for events happening on other blkcgs. v2: Updated for bdi_writeback_congested. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
blk_{set|clear}_queue_congested() take @q and set or clear, respectively, the congestion state of its bdi's root wb. Because bdi used to be able to handle congestion state only on the root wb, the callers of those functions tested whether the congestion is on the root blkcg and skipped if not. This is cumbersome and makes implementation of per cgroup bdi_writeback congestion state propagation difficult. This patch renames blk_{set|clear}_queue_congested() to blk_{set|clear}_congested(), and makes them take request_list instead of request_queue and test whether the specified request_list is the root one before updating bdi_writeback congestion state. This makes the tests in the callers unnecessary and simplifies them. As there are no external users of these functions, the definitions are moved from include/linux/blkdev.h to block/blk-core.c. This patch doesn't introduce any noticeable behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Currently, all congestion functions take bdi (backing_dev_info) and always operate on the root wb (bdi->wb) and the congestion state from the block layer is propagated only for the root blkcg. This patch introduces {set|clear}_wb_congested() and wb_congested() which take a bdi_writeback_congested and bdi_writeback respectively. The bdi counteparts are now wrappers invoking the wb based functions on @bdi->wb. While converting clear_bdi_congested() to clear_wb_congested(), the local variable declaration order between @wqh and @bit is swapped for cosmetic reason. This patch just adds the new wb based functions. The following patches will apply them. v2: Updated for bdi_writeback_congested. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Currently, balance_dirty_pages() always work on bdi->wb. This patch updates it to work on the wb (bdi_writeback) matching memcg and blkcg of the current task as that's what the inode is being dirtied against. balance_dirty_pages_ratelimited() now pins the current wb and passes it to balance_dirty_pages(). As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Until now, all WB_* stats were accounted against the root wb (bdi_writeback), now that multiple wb (bdi_writeback) support is in place, let's attributes the stats to the respective per-cgroup wb's. As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
A blkg (blkcg_gq) can be congested and decongested independently from other blkgs on the same request_queue. Accordingly, for cgroup writeback support, the congestion status at bdi (backing_dev_info) should be split and updated separately from matching blkg's. This patch prepares by adding blkg->wb_congested and associating a blkg with its matching per-blkcg bdi_writeback_congested on creation. v2: Updated to associate bdi_writeback_congested instead of bdi_writeback. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
For the planned cgroup writeback support, on each bdi (backing_dev_info), each memcg will be served by a separate wb (bdi_writeback). This patch updates bdi so that a bdi can host multiple wbs (bdi_writebacks). On the default hierarchy, blkcg implicitly enables memcg. This allows using memcg's page ownership for attributing writeback IOs, and every memcg - blkcg combination can be served by its own wb by assigning a dedicated wb to each memcg. This means that there may be multiple wb's of a bdi mapped to the same blkcg. As congested state is per blkcg - bdi combination, those wb's should share the same congested state. This is achieved by tracking congested state via bdi_writeback_congested structs which are keyed by blkcg. bdi->wb remains unchanged and will keep serving the root cgroup. cgwb's (cgroup wb's) for non-root cgroups are created on-demand or looked up while dirtying an inode according to the memcg of the page being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree by its memcg id. Once an inode is associated with its wb, it can be retrieved using inode_to_wb(). Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all pages will keep being associated with bdi->wb. v3: inode_attach_wb() in account_page_dirtied() moved inside mapping_cap_account_dirty() block where it's known to be !NULL. Also, an unnecessary NULL check before kfree() removed. Both detected by the kbuild bot. v2: Updated so that wb association is per inode and wb is per memcg rather than blkcg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
cgroup writeback requires support from both bdi and filesystem sides. Add BDI_CAP_CGROUP_WRITEBACK and FS_CGROUP_WRITEBACK to indicate support and enable BDI_CAP_CGROUP_WRITEBACK on block based bdi's by default. Also, define CONFIG_CGROUP_WRITEBACK which is enabled if both MEMCG and BLK_CGROUP are enabled. inode_cgwb_enabled() which determines whether a given inode's both bdi and fs support cgroup writeback is added. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Currently, a wb's (bdi_writeback) congestion state is carried in its ->state field; however, cgroup writeback support will require multiple wb's sharing the same congestion state. This patch separates out congestion state into its own struct - struct bdi_writeback_congested. A new field wb field, wb_congested, points to its associated congested struct. The default wb, bdi->wb, always points to bdi->wb_congested. While this patch adds a layer of indirection, it doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
wb_init() currently always uses GFP_KERNEL but the planned cgroup writeback support needs using other allocation masks. Add @gfp to wb_init(). This patch doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Now that bdi definitions are moved to backing-dev-defs.h, backing-dev.h can include blkdev.h and inline inode_to_bdi() without worrying about introducing circular include dependency. The function gets called from hot paths and fairly trivial. This patch makes inode_to_bdi() and sb_is_blkdev_sb() that the function calls inline. blockdev_superblock and noop_backing_dev_info are EXPORT_GPL'd to allow the inline functions to be used from modules. While at it, make sb_is_blkdev_sb() return bool instead of int. v2: Fixed typo in description as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
With the planned cgroup writeback support, backing-dev related declarations will be more widely used across block and cgroup; unfortunately, including backing-dev.h from include/linux/blkdev.h makes cyclic include dependency quite likely. This patch separates out backing-dev-defs.h which only has the essential definitions and updates blkdev.h to include it. c files which need access to more backing-dev details now include backing-dev.h directly. This takes backing-dev.h off the common include dependency chain making it a lot easier to use it across block and cgroup. v2: fs/fat build failure fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Move wb_shutdown(), bdi_register(), bdi_register_dev(), bdi_prune_sb(), bdi_remove_from_list() and bdi_unregister() so that init / exit functions are grouped together. This will make updating init / exit paths for cgroup writeback support easier. This is pure source file reorganization. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-