Solve two ergonomic issues with struct seq_buf;

1) Too much boilerplate is required to initialize:

	struct seq_buf s;
	char buf[32];

	seq_buf_init(s, buf, sizeof(buf));

Instead, we can build this directly on the stack. Provide
DECLARE_SEQ_BUF() macro to do this:

	DECLARE_SEQ_BUF(s, 32);

2) %NUL termination is fragile and requires 2 steps to get a valid
   C String (and is a layering violation exposing the "internals" of
   seq_buf):

	seq_buf_terminate(s);
	do_something(s->buffer);

Instead, we can just return s->buffer directly after terminating it in
the refactored seq_buf_terminate(), now known as seq_buf_str():

	do_something(seq_buf_str(s));

Link: https://lore.kernel.org/linux-trace-kernel/20231027155634.make.260-kees@kernel.org
Link: https://lore.kernel.org/linux-trace-kernel/20231026194033.it.702-kees@kernel.org/

Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

It's eventfs_inode not eventfs_indoe. There's no deer involved!

Link: https://lore.kernel.org/linux-trace-kernel/20231024131024.5634c743@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 5790b1fb ("eventfs: Remove eventfs_file and just use eventfs_inode")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

As the comment right above a WARN_ON() in create_file_dentry() states:

  * Note, with the mutex held, the e_dentry cannot have content
  * and the ei->is_freed be true at the same time.

But the WARN_ON() only has:

  WARN_ON_ONCE(ei->is_free);

Where to match the comment (and what it should actually do) is:

  dentry = *e_dentry;
  WARN_ON_ONCE(dentry && ei->is_free)

Also in that case, set dentry to NULL (although it should never happen).

Link: https://lore.kernel.org/linux-trace-kernel/20231024123628.62b88755@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 5790b1fb ("eventfs: Remove eventfs_file and just use eventfs_inode")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

While powerpc doesn't use the seq_buf readpos, it did explicitly
initialise it for no good reason.

Link: https://lore.kernel.org/linux-trace-kernel/20231024145600.739451-1-willy@infradead.org

Cc: Christoph Hellwig <hch@lst.de>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: d0ed46b6 ("tracing: Move readpos from seq_buf to trace_seq")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Turn a kzalloc()+strcpy()+strncat() into an equivalent and less verbose
kasprintf().

Link: https://lore.kernel.org/linux-trace-kernel/30b6fb04dadc10a03cc1ad08f5d8a93ef623a167.1697899346.git.christophe.jaillet@wanadoo.fr

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Mukesh ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The comment for seq_buf_has_overflowed() says that an overflow condition is
marked by len == size, but that's not what the code is testing.  Make the
comment match reality.

Link: https://lkml.kernel.org/r/87pm19kp0m.fsf@meer.lwn.net

Fixes: 8cd709ae ("tracing: Have seq_buf use full buffer")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

To make seq_buf more lightweight as a string buf, move the readpos member
from seq_buf to its container, trace_seq.  That puts the responsibility
of maintaining the readpos entirely in the tracing code.  If some future
users want to package up the readpos with a seq_buf, we can define a
new struct then.

Link: https://lore.kernel.org/linux-trace-kernel/20231020033545.2587554-2-willy@infradead.org

Cc: Kees Cook <keescook@chromium.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

No functional modification involved.

fs/tracefs/event_inode.c:864: warning: expecting prototype for eventfs_remove(). Prototype was for eventfs_remove_dir() instead.

Link: https://lore.kernel.org/linux-trace-kernel/20231019031353.73846-1-jiapeng.chong@linux.alibaba.comReported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6939Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The eventfs_create_dir() function returns error pointers, it never returns
NULL.  Update the check to reflect that.

Link: https://lore.kernel.org/linux-trace-kernel/ff641474-84e2-46a7-9d7a-62b251a1050c@moroto.mountain

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 5790b1fb ("eventfs: Remove eventfs_file and just use eventfs_inode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The failure path of allocating ei goes to a path that dereferences ei.
Add another label that skips over the ei dereferences to do the rest of
the clean up.

Link: https://lore.kernel.org/all/70e7bace-561c-95f-1117-706c2c220bc@inria.fr/
Link: https://lore.kernel.org/linux-trace-kernel/20231019204132.6662fef0@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 5790b1fb ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When building with clang and CONFIG_RANDSTRUCT_FULL=y, there is an error
due to a cast in eventfs_create_events_dir():

  fs/tracefs/event_inode.c:734:10: error: casting from randomized structure pointer type 'struct dentry *' to 'struct eventfs_inode *'
    734 |                 return (struct eventfs_inode *)dentry;
        |                        ^
  1 error generated.

Use the ERR_CAST() function to resolve the error, as it was designed for
this exact situation (casting an error pointer to another type).

Link: https://lore.kernel.org/linux-trace-kernel/20231018-ftrace-fix-clang-randstruct-v1-1-338cb214abfb@kernel.org

Closes: https://github.com/ClangBuiltLinux/linux/issues/1947
Fixes: 5790b1fb ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The system_callback() function in trace_events.c is only used within that
file. The "static" annotation was missed.

Fixes: 5790b1fb ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310051743.y9EobbUr-lkp@intel.com/Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The update to removing the eventfs_file changed the way the events top
level directory was handled. Instead of returning a dentry, it now returns
the eventfs_inode. In this changed, the removing of the events top level
directory is not much different than removing any of the other
directories. Because of this, the removal just called eventfs_remove_dir()
instead of eventfs_remove_events_dir().

Although eventfs_remove_dir() does the clean up, it misses out on the
dget() of the ei->dentry done in eventfs_create_events_dir(). It makes
more sense to match eventfs_create_events_dir() with a specific function
eventfs_remove_events_dir() and this specific function can then perform
the dput() to the dentry that had the dget() when it was created.

Fixes: 5790b1fb ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310051743.y9EobbUr-lkp@intel.com/Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The function that the kprobe_args_char and kprobes_arg_string attaches to
for its test has changed its name once again. Now we need to check for
eventfs_create_dir(), and if it exists, use that, otherwise check for
eventfs_add_dir() and if that exists use that, otherwise use the original
tracefs_create_dir()!

Link: https://lore.kernel.org/linux-trace-kernel/20230914163535.487267410@goodmis.org

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of having a descriptor for every file represented in the eventfs
directory, only have the directory itself represented. Change the API to
send in a list of entries that represent all the files in the directory
(but not other directories). The entry list contains a name and a callback
function that will be used to create the files when they are accessed.

struct eventfs_inode *eventfs_create_events_dir(const char *name, struct dentry *parent,
						const struct eventfs_entry *entries,
						int size, void *data);

is used for the top level eventfs directory, and returns an eventfs_inode
that will be used by:

struct eventfs_inode *eventfs_create_dir(const char *name, struct eventfs_inode *parent,
					 const struct eventfs_entry *entries,
					 int size, void *data);

where both of the above take an array of struct eventfs_entry entries for
every file that is in the directory.

The entries are defined by:

typedef int (*eventfs_callback)(const char *name, umode_t *mode, void **data,
				const struct file_operations **fops);

struct eventfs_entry {
	const char			*name;
	eventfs_callback		callback;
};

Where the name is the name of the file and the callback gets called when
the file is being created. The callback passes in the name (in case the
same callback is used for multiple files), a pointer to the mode, data and
fops. The data will be pointing to the data that was passed in
eventfs_create_dir() or eventfs_create_events_dir() but may be overridden
to point to something else, as it will be used to point to the
inode->i_private that is created. The information passed back from the
callback is used to create the dentry/inode.

If the callback fills the data and the file should be created, it must
return a positive number. On zero or negative, the file is ignored.

This logic may also be used as a prototype to convert entire pseudo file
systems into just-in-time allocation.

The "show_events_dentry" file has been updated to show the directories,
and any files they have.

With just the eventfs_file allocations:

 Before after deltas for meminfo (in kB):

   MemFree:		-14360
   MemAvailable:	-14260
   Buffers:		40
   Cached:		24
   Active:		44
   Inactive:		48
   Inactive(anon):	28
   Active(file):	44
   Inactive(file):	20
   Dirty:		-4
   AnonPages:		28
   Mapped:		4
   KReclaimable:	132
   Slab:		1604
   SReclaimable:	132
   SUnreclaim:		1472
   Committed_AS:	12

 Before after deltas for slabinfo:

   <slab>:		<objects>	[ * <size> = <total>]

   ext4_inode_cache	27		[* 1184 = 31968 ]
   extent_status	102		[*   40 = 4080 ]
   tracefs_inode_cache	144		[*  656 = 94464 ]
   buffer_head		39		[*  104 = 4056 ]
   shmem_inode_cache	49		[*  800 = 39200 ]
   filp			-53		[*  256 = -13568 ]
   dentry		251		[*  192 = 48192 ]
   lsm_file_cache	277		[*   32 = 8864 ]
   vm_area_struct	-14		[*  184 = -2576 ]
   trace_event_file	1748		[*   88 = 153824 ]
   kmalloc-1k		35		[* 1024 = 35840 ]
   kmalloc-256		49		[*  256 = 12544 ]
   kmalloc-192		-28		[*  192 = -5376 ]
   kmalloc-128		-30		[*  128 = -3840 ]
   kmalloc-96		10581		[*   96 = 1015776 ]
   kmalloc-64		3056		[*   64 = 195584 ]
   kmalloc-32		1291		[*   32 = 41312 ]
   kmalloc-16		2310		[*   16 = 36960 ]
   kmalloc-8		9216		[*    8 = 73728 ]

 Free memory dropped by 14,360 kB
 Available memory dropped by 14,260 kB
 Total slab additions in size: 1,771,032 bytes

With this change:

 Before after deltas for meminfo (in kB):

   MemFree:		-12084
   MemAvailable:	-11976
   Buffers:		32
   Cached:		32
   Active:		72
   Inactive:		168
   Inactive(anon):	176
   Active(file):	72
   Inactive(file):	-8
   Dirty:		24
   AnonPages:		196
   Mapped:		8
   KReclaimable:	148
   Slab:		836
   SReclaimable:	148
   SUnreclaim:		688
   Committed_AS:	324

 Before after deltas for slabinfo:

   <slab>:		<objects>	[ * <size> = <total>]

   tracefs_inode_cache	144		[* 656 = 94464 ]
   shmem_inode_cache	-23		[* 800 = -18400 ]
   filp			-92		[* 256 = -23552 ]
   dentry		179		[* 192 = 34368 ]
   lsm_file_cache	-3		[* 32 = -96 ]
   vm_area_struct	-13		[* 184 = -2392 ]
   trace_event_file	1748		[* 88 = 153824 ]
   kmalloc-1k		-49		[* 1024 = -50176 ]
   kmalloc-256		-27		[* 256 = -6912 ]
   kmalloc-128		1864		[* 128 = 238592 ]
   kmalloc-64		4685		[* 64 = 299840 ]
   kmalloc-32		-72		[* 32 = -2304 ]
   kmalloc-16		256		[* 16 = 4096 ]
   total = 721352

 Free memory dropped by 12,084 kB
 Available memory dropped by 11,976 kB
 Total slab additions in size:  721,352 bytes

That's over 2 MB in savings per instance for free and available memory,
and over 1 MB in savings per instance of slab memory.

Link: https://lore.kernel.org/linux-trace-kernel/20231003184059.4924468e@gandalf.local.home
Link: https://lore.kernel.org/linux-trace-kernel/20231004165007.43d79161@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Users need to know how to make events persist now that we allow for
that. We also now allow the dynamic_events file to create events by
utilizing the persist flag during event register.

Add back in to documentation how /sys/kernel/tracing/dynamic_events can
be used to create persistent user_events. Add a section under registering
for the currently supported flags (USER_EVENT_REG_PERSIST) and the
required permissions. Add a note under deleting that deleting a
persistent event also requires sufficient permission.

Link: https://lkml.kernel.org/r/20230912180704.1284-4-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Now that we have exposed USER_EVENT_REG_PERSIST events can persist both
via the ABI and in the /sys/kernel/tracing/dynamic_events file.

Ensure both the ABI and DYN cases work by calling both during the parse
tests. Add new flags test that ensures only USER_EVENT_REG_PERSIST is
honored and any other flag is invalid.

Link: https://lkml.kernel.org/r/20230912180704.1284-3-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

There are several scenarios that have come up where having a user_event
persist even if the process that registered it exits. The main one is
having a daemon create events on bootup that shouldn't get deleted if
the daemon has to exit or reload. Another is within OpenTelemetry
exporters, they wish to potentially check if a user_event exists on the
system to determine if exporting the data out should occur. The
user_event in this case must exist even in the absence of the owning
process running (such as the above daemon case).

Expose the previously internal flag USER_EVENT_REG_PERSIST to user
processes. Upon register or delete of events with this flag, ensure the
user is perfmon_capable to prevent random user processes with access to
tracefs from creating events that persist after exit.

Link: https://lkml.kernel.org/r/20230912180704.1284-2-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
rb_insert_pages. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).

No functional change intended.

Link: https://lore.kernel.org/linux-trace-kernel/20230914163420.12923-1-ubizjak@gmail.com

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The ring buffer of global_trace is set to the minimum size in
order to save memory on boot up and then it will be expand when
some trace feature enabled.

However currently operations under an instance can also cause
global_trace ring buffer being expanded, and the expanded memory
would be wasted if global_trace then not being used.

See following case, we enable 'sched_switch' event in instance 'A', then
ring buffer of global_trace is unexpectedly expanded to be 1410KB, also
the '(expanded: 1408)' from 'buffer_size_kb' of instance is confusing.

  # cd /sys/kernel/tracing
  # mkdir instances/A
  # cat buffer_size_kb
  7 (expanded: 1408)
  # cat instances/A/buffer_size_kb
  1410 (expanded: 1408)
  # echo sched:sched_switch > instances/A/set_event
  # cat buffer_size_kb
  1410
  # cat instances/A/buffer_size_kb
  1410

To fix it, we can:
  - Make 'ring_buffer_expanded' as a member of 'struct trace_array';
  - Make 'ring_buffer_expanded' of instance is defaultly true,
    global_trace is defaultly false;
  - In order not to expose 'global_trace' outside of file
    'kernel/trace/trace.c', introduce trace_set_ring_buffer_expanded()
    to set 'ring_buffer_expanded' as 'true';
  - Pass the expected trace_array to tracing_update_buffers().

Link: https://lore.kernel.org/linux-trace-kernel/20230906091837.3998020-1-zhengyejian1@huawei.comSigned-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the module compression with xz so the in-kernel decompressor
   works

 - Document a kconfig idiom to express an optional dependency between
   modules

 - Make modpost, when W=1 is given, detect broken drivers that reference
   .exit.* sections

 - Remove unused code

* tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove stale code for 'source' symlink in packaging scripts
  modpost: Don't let "driver"s reference .exit.*
  vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros
  modpost: add missing else to the "of" check
  Documentation: kbuild: explain handling optional dependencies
  kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules

Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Fourteen hotfixes, eleven of which are cc:stable. The remainder
  pertain to issues which were introduced after 6.5"

* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  Crash: add lock to serialize crash hotplug handling
  selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
  mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
  mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
  mm, memcg: reconsider kmem.limit_in_bytes deprecation
  mm: zswap: fix potential memory corruption on duplicate store
  arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
  mm: hugetlb: add huge page size param to set_huge_pte_at()
  maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
  maple_tree: add mas_is_active() to detect in-tree walks
  nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
  mm: abstract moving to the next PFN
  mm: report success more often from filemap_map_folio_range()
  fs: binfmt_elf_efpic: fix personality for ELF-FDPIC

Pull misc driver fix from Greg KH:
 "Here is a single, much requested, fix for a set of misc drivers to
  resolve a much reported regression in the -rc series that has also
  propagated back to the stable releases. Sorry for the delay, lots of
  conference travel for a few weeks put me very far behind in patch
  wrangling.

  It has been reported by many to resolve the reported problem, and has
  been in linux-next with no reported issues"

* tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe

Pull tty / serial driver fixes from Greg KH:
 "Here are two tty/serial driver fixes for 6.6-rc4 that resolve some
  reported regressions:

   - revert a n_gsm change that ended up causing problems

   - 8250_port fix for irq data

  both have been in linux-next for over a week with no reported
  problems"

* tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux"
  serial: 8250_port: Check IRQ data before use

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for
  AMD-derived Hygon processors, and fix a SGX kernel crash in the page
  fault handler that can trigger when ksgxd races to reclaim the SECS
  special page, by making the SECS page unswappable"

* tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race
  x86/srso: Add SRSO mitigation for Hygon processors
  x86/kgdb: Fix a kerneldoc warning when build with W=1

Pull timer fix from Ingo Molnar:
 "Fix a spurious kernel warning during CPU hotplug events that may
  trigger when timer/hrtimer softirqs are pending, which are otherwise
  hotplug-safe and don't merit a warning"

* tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Tag (hr)timer softirq as hotplug safe

Pull scheduler fix from Ingo Molnar:
 "Fix a RT tasks related lockup/live-lock during CPU offlining"

* tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Fix live lock between select_fallback_rq() and RT push

Pull perf event fixes from Ingo Molnar:
 "Misc fixes: work around an AMD microcode bug on certain models, and
  fix kexec kernel PMI handlers on AMD systems that get loaded on older
  kernels that have an unexpected register state"

* tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd: Do not WARN() on every IRQ
  perf/x86/amd/core: Fix overflow reset on hotplug

Since commit d8131c29 ("kbuild: remove $(MODLIB)/source symlink"),
modules_install does not create the 'source' symlink.

Remove the stale code from builddeb and kernel.spec.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Drivers must not reference functions marked with __exit as these likely
are not available when the code is built-in.

There are few creative offenders uncovered for example in ARCH=amd64
allmodconfig builds. So only trigger the section mismatch warning for
W=1 builds.

The dual rule that drivers must not reference .init.* is implemented
since commit 0db25245 ("modpost: don't allow *driver to reference
.init.*") which however missed that .exit.* should be handled in the
same way.

Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to
find this improvement.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Remove the left-over of commit e24f6628 ("modpost: remove all
traces of cpuinit/cpuexit sections").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.

Tested with allmodconfig before/after patch; no changes to *.mod.c:

    git checkout v6.6-rc3
    make -j$(nproc) allmodconfig
    make -j$(nproc) olddefconfig

    make -j$(nproc)
    find . -name '*.mod.c' | cpio -pd /tmp/before

    # apply patch

    make -j$(nproc)
    find . -name '*.mod.c' | cpio -pd /tmp/after

    diff -r /tmp/before/ /tmp/after/
    # no difference

Fixes: acbef7b7 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "These are the latest bug fixes that have come up in the soc tree. Most
  of these are fairly minor. Most notably, the majority of changes this
  time are not for dts files as usual.

   - Updates to the addresses of the broadcom and aspeed entries in the
     MAINTAINERS file.

   - Defconfig updates to address a regression on samsung and a build
     warning from an unknown Kconfig symbol

   - Build fixes for the StrongARM and Uniphier platforms

   - Code fixes for SCMI and FF-A firmware drivers, both of which had a
     simple bug that resulted in invalid data, and a lesser fix for the
     optee firmware driver

   - Multiple fixes for the recently added loongson/loongarch "guts" soc
     driver

   - Devicetree fixes for RISC-V on the startfive platform, addressing
     issues with NOR flash, usb and uart.

   - Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with
     clock, gpio, hdmi settings and the Makefile

   - Bug fixes for i.MX firmware code and the OCOTP soc driver

   - Multiple fixes for the TI sysc bus driver

   - Minor dts updates for TI omap dts files, to address boot time
     warnings and errors"

* tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
  MAINTAINERS: Fix Florian Fainelli's email address
  arm64: defconfig: enable syscon-poweroff driver
  ARM: locomo: fix locomolcd_power declaration
  soc: loongson: loongson2_guts: Remove unneeded semicolon
  soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()
  soc: loongson: loongson_pm2: Populate children syscon nodes
  dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child
  soc: loongson: loongson_pm2: Drop useless of_device_id compatible
  dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible
  soc: loongson: loongson_pm2: Add dependency for INPUT
  arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
  ARM: uniphier: fix cache kernel-doc warnings
  MAINTAINERS: aspeed: Update Andrew's email address
  MAINTAINERS: aspeed: Update git tree URL
  firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
  arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
  arm64: dts: imx8mm-evk: Fix hdmi@3d node
  soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
  arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
  arm64: dts: imx8mp: Fix SDMA2/3 clocks
  ...

Pull tracing fixes from Steven Rostedt:

 - Make sure 32-bit applications using user events have aligned access
   when running on a 64-bit kernel.

 - Add cond_resched in the loop that handles converting enums in
   print_fmt string is trace events.

 - Fix premature wake ups of polling processes in the tracing ring
   buffer. When a task polls waiting for a percentage of the ring buffer
   to be filled, the writer still will wake it up at every event. Add
   the polling's percentage to the "shortest_full" list to tell the
   writer when to wake it up.

 - For eventfs dir lookups on dynamic events, an event system's only
   event could be removed, leaving its dentry with no children. This is
   totally legitimate. But in eventfs_release() it must not access the
   children array, as it is only allocated when the dentry has children.

* tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Test for dentries array allocated in eventfs_release()
  tracing/user_events: Align set_bit() address for all archs
  tracing: relax trace_event_eval_update() execution with cond_resched()
  ring-buffer: Update "shortest_full" in polling

The dcache_dir_open_wrapper() could be called when a dynamic event is
being deleted leaving a dentry with no children. In this case the
dlist->dentries array will never be allocated. This needs to be checked
for in eventfs_release(), otherwise it will trigger a NULL pointer
dereference.

Link: https://lore.kernel.org/linux-trace-kernel/20230930090106.1c3164e9@rorschach.local.home

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: ef36b4f9 ("eventfs: Remember what dentries were created on dir open")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

All architectures should use a long aligned address passed to set_bit().
User processes can pass either a 32-bit or 64-bit sized value to be
updated when tracing is enabled when on a 64-bit kernel. Both cases are
ensured to be naturally aligned, however, that is not enough. The
address must be long aligned without affecting checks on the value
within the user process which require different adjustments for the bit
for little and big endian CPUs.

Add a compat flag to user_event_enabler that indicates when a 32-bit
value is being used on a 64-bit kernel. Long align addresses and correct
the bit to be used by set_bit() to account for this alignment. Ensure
compat flags are copied during forks and used during deletion clears.

Link: https://lore.kernel.org/linux-trace-kernel/20230925230829.341-2-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/20230914131102.179100-1-cleger@rivosinc.com/

Cc: stable@vger.kernel.org
Fixes: 72357590 ("tracing/user_events: Use remote writes for event enablement")
Reported-by: Clément Léger <cleger@rivosinc.com>
Suggested-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When kernel is compiled without preemption, the eval_map_work_func()
(which calls trace_event_eval_update()) will not be preempted up to its
complete execution. This can actually cause a problem since if another
CPU call stop_machine(), the call will have to wait for the
eval_map_work_func() function to finish executing in the workqueue
before being able to be scheduled. This problem was observe on a SMP
system at boot time, when the CPU calling the initcalls executed
clocksource_done_booting() which in the end calls stop_machine(). We
observed a 1 second delay because one CPU was executing
eval_map_work_func() and was not preempted by the stop_machine() task.

Adding a call to cond_resched() in trace_event_eval_update() allows
other tasks to be executed and thus continue working asynchronously
like before without blocking any pending task at boot time.

Link: https://lore.kernel.org/linux-trace-kernel/20230929191637.416931-1-cleger@rivosinc.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

It was discovered that the ring buffer polling was incorrectly stating
that read would not block, but that's because polling did not take into
account that reads will block if the "buffer-percent" was set. Instead,
the ring buffer polling would say reads would not block if there was any
data in the ring buffer. This was incorrect behavior from a user space
point of view. This was fixed by commit 42fb0a1e by having the polling
code check if the ring buffer had more data than what the user specified
"buffer percent" had.

The problem now is that the polling code did not register itself to the
writer that it wanted to wait for a specific "full" value of the ring
buffer. The result was that the writer would wake the polling waiter
whenever there was a new event. The polling waiter would then wake up, see
that there's not enough data in the ring buffer to notify user space and
then go back to sleep. The next event would wake it up again.

Before the polling fix was added, the code would wake up around 100 times
for a hackbench 30 benchmark. After the "fix", due to the constant waking
of the writer, it would wake up over 11,0000 times! It would never leave
the kernel, so the user space behavior was still "correct", but this
definitely is not the desired effect.

To fix this, have the polling code add what it's waiting for to the
"shortest_full" variable, to tell the writer not to wake it up if the
buffer is not as full as it expects to be.

Note, after this fix, it appears that the waiter is now woken up around 2x
the times it was before (~200). This is a tremendous improvement from the
11,000 times, but I will need to spend some time to see why polling is
more aggressive in its wakeups than the read blocking code.

Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 42fb0a1e ("tracing/ring-buffer: Have polling block on watermark")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Tested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull dma-mapping fixes from Christoph Hellwig:

 - fix the narea calculation in swiotlb initialization (Ross Lagerwall)

 - fix the check whether a device has used swiotlb (Petr Tesarik)

* tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: fix the check whether a device has used software IO TLB
  swiotlb: use the calculated number of areas