1. 20 Aug, 2009 1 commit
  2. 13 Aug, 2009 25 commits
    • Linus Torvalds's avatar
      Linux 2.6.31-rc6 · 64f1607f
      Linus Torvalds authored
      64f1607f
    • Linus Torvalds's avatar
      genirq: prevent wakeup of freed irq thread · 2d860ad7
      Linus Torvalds authored
      free_irq() can remove an irqaction while the corresponding interrupt
      is in progress, but free_irq() sets action->thread to NULL
      unconditionally, which might lead to a NULL pointer dereference in
      handle_IRQ_event() when the hard interrupt context tries to wake up
      the handler thread.
      
      Prevent this by moving the thread stop after synchronize_irq(). No
      need to set action->thread to NULL either as action is going to be
      freed anyway.
      
      This fixes a boot crash reported against preempt-rt which uses the
      mainline irq threads code to implement full irq threading.
      
      [ tglx: removed local irqthread variable ]
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      2d860ad7
    • Linus Torvalds's avatar
      Merge branch 'perfcounters-fixes-for-linus' of... · 3493e84d
      Linus Torvalds authored
      Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
      
      * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
        perf_counter: Report the cloning task as parent on perf_counter_fork()
        perf_counter: Fix an ipi-deadlock
        perf: Rework/fix the whole read vs group stuff
        perf_counter: Fix swcounter context invariance
        perf report: Don't show unresolved DSOs and symbols when -S/-d is used
        perf tools: Add a general option to enable raw sample records
        perf tools: Add a per tracepoint counter attribute to get raw sample
        perf_counter: Provide hw_perf_counter_setup_online() APIs
        perf list: Fix large list output by using the pager
        perf_counter, x86: Fix/improve apic fallback
        perf record: Add missing -C option support for specifying profile cpu
        perf tools: Fix dso__new handle() to handle deleted DSOs
        perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available
        perf report: Show the tid too in -D
        perf record: Fix .tid and .pid fill-in when synthesizing events
        perf_counter, x86: Fix generic cache events on P6-mobile CPUs
        perf_counter, x86: Fix lapic printk message
      3493e84d
    • Linus Torvalds's avatar
      Merge branch 'core-fixes-for-linus' of... · 919aa96a
      Linus Torvalds authored
      Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
      
      * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
        futex: Fix handling of bad requeue syscall pairing
        futex: Fix compat_futex to be same as futex for REQUEUE_PI
        locking, sched: Give waitqueue spinlocks their own lockdep classes
        futex: Update futex_q lock_ptr on requeue proxy lock
      919aa96a
    • Linus Torvalds's avatar
      Merge branch 'x86-fixes-for-linus' of... · 1c2ffff4
      Linus Torvalds authored
      Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
      
      * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
        x86: Fix oops in identify_cpu() on CPUs without CPUID
        x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag
        x86, mce: therm_throt - change when we print messages
        x86: Add reboot quirk for every 5 series MacBook/Pro
      1c2ffff4
    • Linus Torvalds's avatar
      Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 · bc7af9ba
      Linus Torvalds authored
      * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits)
        ocfs2: Fix possible deadlock when extending quota file
        ocfs2: keep index within status_map[]
        ocfs2: Initialize the cluster we're writing to in a non-sparse extend
        ocfs2: Remove redundant BUG_ON in __dlm_queue_ast()
        ocfs2/quota: Release lock for error in ocfs2_quota_write.
        ocfs2: Define credit counts for quota operations
        ocfs2: Remove syncjiff field from quota info
        ocfs2: Fix initialization of blockcheck stats
        ocfs2: Zero out padding of on disk dquot structure
        ocfs2: Initialize blocks allocated to local quota file
        ocfs2: Mark buffer uptodate before calling ocfs2_journal_access_dq()
        ocfs2: Make global quota files blocksize aligned
        ocfs2: Use ocfs2_rec_clusters in ocfs2_adjust_adjacent_records.
        ocfs2: Fix deadlock on umount
        ocfs2: Add extra credits and access the modified bh in update_edge_lengths.
        ocfs2: Fail ocfs2_get_block() immediately when a block needs allocation
        ocfs2: Fix error return in ocfs2_write_cluster()
        ocfs2: Fix compilation warning for fs/ocfs2/xattr.c
        ocfs2: Initialize count in aio_write before generic_write_checks
        ocfs2: log the actual return value of ocfs2_file_aio_write()
        ...
      bc7af9ba
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://neil.brown.name/md · d58d2d1a
      Linus Torvalds authored
      * 'for-linus' of git://neil.brown.name/md:
        md: allow upper limit for resync/reshape to be set when array is read-only
        md/raid5: Properly remove excess drives after shrinking a raid5/6
        md/raid5: make sure a reshape restarts at the correct address.
        md/raid5: allow new reshape modes to be restarted in the middle.
        md: never advance 'events' counter by more than 1.
        Remove deadlock potential in md_open
      d58d2d1a
    • Linus Torvalds's avatar
      Merge branch 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 · 7334219c
      Linus Torvalds authored
      * 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
        sh: fix i2c init order on ap325rxa V2
        sh: fix i2c init order on Migo-R V2
        sh: convert processor device setup functions to arch_initcall()
      7334219c
    • Linus Torvalds's avatar
      Make sock_sendpage() use kernel_sendpage() · e6949583
      Linus Torvalds authored
      kernel_sendpage() does the proper default case handling for when the
      socket doesn't have a native sendpage implementation.
      
      Now, arguably this might be something that we could instead solve by
      just specifying that all protocols should do it themselves at the
      protocol level, but we really only care about the common protocols.
      Does anybody really care about sendpage on something like Appletalk? Not
      likely.
      Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
      Acked-by: default avatarJulien TINNES <julien@cr0.org>
      Acked-by: default avatarTavis Ormandy <taviso@sdf.lonestar.org>
      Cc: stable@kernel.org
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e6949583
    • Peter Zijlstra's avatar
      perf_counter: Report the cloning task as parent on perf_counter_fork() · 94d5d1b2
      Peter Zijlstra authored
      A bug in (9f498cc5: perf_counter: Full task tracing) makes
      profiling multi-threaded apps it go belly up.
      
      [ output as: (PID:TID):(PPID:PTID) ]
      
       # ./perf report -D | grep FORK
      0x4b0 [0x18]: PERF_EVENT_FORK: (3237:3237):(3236:3236)
      0xa10 [0x18]: PERF_EVENT_FORK: (3237:3238):(3236:3236)
      0xa70 [0x18]: PERF_EVENT_FORK: (3237:3239):(3236:3236)
      0xad0 [0x18]: PERF_EVENT_FORK: (3237:3240):(3236:3236)
      0xb18 [0x18]: PERF_EVENT_FORK: (3237:3241):(3236:3236)
      
      Shows us that the test (27d028de perf report: Update for the new
      FORK/EXIT events) in builtin-report.c:
      
              /*
               * A thread clone will have the same PID for both
               * parent and child.
               */
              if (thread == parent)
                      return 0;
      
      Will clearly fail.
      
      The problem is that perf_counter_fork() reports the actual
      parent, instead of the cloning thread.
      
      Fixing that (with the below patch), yields:
      
       # ./perf report -D | grep FORK
      0x4c8 [0x18]: PERF_EVENT_FORK: (1590:1590):(1589:1589)
      0xbd8 [0x18]: PERF_EVENT_FORK: (1590:1591):(1590:1590)
      0xc80 [0x18]: PERF_EVENT_FORK: (1590:1592):(1590:1590)
      0x3338 [0x18]: PERF_EVENT_FORK: (1590:1593):(1590:1590)
      0x66b0 [0x18]: PERF_EVENT_FORK: (1590:1594):(1590:1590)
      
      Which both makes more sense and doesn't confuse perf report
      anymore.
      Reported-by: default avatarPekka Enberg <penberg@cs.helsinki.fi>
      Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: paulus@samba.org
      Cc: Anton Blanchard <anton@samba.org>
      Cc: Arjan van de Ven <arjan@infradead.org>
      LKML-Reference: <1250172882.5241.62.camel@twins>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      94d5d1b2
    • Peter Zijlstra's avatar
      perf_counter: Fix an ipi-deadlock · 970892a9
      Peter Zijlstra authored
      perf_pending_counter() is called from IRQ context and will call
      perf_counter_disable(), however perf_counter_disable() uses
      smp_call_function_single() which doesn't fancy being used with
      IRQs disabled due to IPI deadlocks.
      
      Fix this by making it use the local __perf_counter_disable()
      call and teaching the counter_sched_out() code about pending
      disables as well.
      
      This should cover the case where a counter migrates before the
      pending queue gets processed.
      Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Corey J Ashford <cjashfor@us.ibm.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: stephane eranian <eranian@googlemail.com>
      LKML-Reference: <20090813103655.244097721@chello.nl>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      970892a9
    • Peter Zijlstra's avatar
      perf: Rework/fix the whole read vs group stuff · 3dab77fb
      Peter Zijlstra authored
      Replace PERF_SAMPLE_GROUP with PERF_SAMPLE_READ and introduce
      PERF_FORMAT_GROUP to deal with group reads in a more generic
      way.
      
      This allows you to get group reads out of read() as well.
      Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Corey J Ashford <cjashfor@us.ibm.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: stephane eranian <eranian@googlemail.com>
      LKML-Reference: <20090813103655.117411814@chello.nl>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      3dab77fb
    • Peter Zijlstra's avatar
      perf_counter: Fix swcounter context invariance · bcfc2602
      Peter Zijlstra authored
      perf_swcounter_is_counting() uses a lock, which means we cannot
      use swcounters from NMI or when holding that particular lock,
      this is unintended.
      
      The below removes the lock, this opens up race window, but not
      worse than the swcounters already experience due to RCU
      traversal of the context in perf_swcounter_ctx_event().
      
      This also fixes the hard lockups while opening a lockdep
      tracepoint counter.
      Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Acked-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: stephane eranian <eranian@googlemail.com>
      Cc: Corey J Ashford <cjashfor@us.ibm.com>
      LKML-Reference: <1250149915.10001.66.camel@twins>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      bcfc2602
    • Arnaldo Carvalho de Melo's avatar
      perf report: Don't show unresolved DSOs and symbols when -S/-d is used · 8fd101f2
      Arnaldo Carvalho de Melo authored
      We're interested in just those symbols/DSOs, so filter out the
      unresolved ones.
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      LKML-Reference: <20090812211957.GE3495@ghostprotocols.net>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      8fd101f2
    • Frederic Weisbecker's avatar
      perf tools: Add a general option to enable raw sample records · daac07b2
      Frederic Weisbecker authored
      While we can enable the perf sample records per tracepoint
      counter, we may also want to enable this option for every
      tracepoint counters to open, so that we don't need to add a
      :record flag for all of them.
      
      Add the -R, --raw-samples options for this purpose.
      Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Mike Galbraith <efault@gmx.de>
      LKML-Reference: <1250152039-7284-2-git-send-email-fweisbec@gmail.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      daac07b2
    • Frederic Weisbecker's avatar
      perf tools: Add a per tracepoint counter attribute to get raw sample · 3a9f131f
      Frederic Weisbecker authored
      Add a new flag field while opening a tracepoint perf counter:
      
      	-e tracepoint_subsystem:tracepoint_name:flags
      
      This is intended to be generic although for now it only supports the
      r[e[c[o[r[d]]]]] flag:
      
      	./perf record -e workqueue:workqueue_insertion:record
      	./perf record -e workqueue:workqueue_insertion:r
      
      will have the same effect: enabling the raw samples record for
      the given tracepoint counter.
      
      In the future, we may want to support further flags, separated
      by commas.
      Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Mike Galbraith <efault@gmx.de>
      LKML-Reference: <1250152039-7284-1-git-send-email-fweisbec@gmail.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      3a9f131f
    • Ingo Molnar's avatar
      perf_counter: Provide hw_perf_counter_setup_online() APIs · 28402971
      Ingo Molnar authored
      Provide weak aliases for hw_perf_counter_setup_online(). This is
      used by the BTS patches (for v2.6.32), but it interacts with
      fixes so propagate this upstream. (it has no effect as of yet)
      
      Also export perf_counter_output() to architecture code.
      
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <new-submission>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      28402971
    • Arnaldo Carvalho de Melo's avatar
      perf list: Fix large list output by using the pager · 8f7a0dc5
      Arnaldo Carvalho de Melo authored
      When /sys/kernel/debug is mounted the list can be imense, so
      use the pager like the other tools.
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Acked-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      LKML-Reference: <20090812174459.GB3495@ghostprotocols.net>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      8f7a0dc5
    • Magnus Damm's avatar
      sh: fix i2c init order on ap325rxa V2 · dbefd606
      Magnus Damm authored
      Convert the AP325RXA board code to register devices at
      arch_initcall() time instead of device_initcall(). This
      fix unbreaks pcf8563 RTC driver support.
      Signed-off-by: default avatarMagnus Damm <damm@igel.co.jp>
      Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
      dbefd606
    • Magnus Damm's avatar
      sh: fix i2c init order on Migo-R V2 · ba3a1701
      Magnus Damm authored
      Convert the Migo-R board code to register devices at
      arch_initcall() time instead of __initcall(). This fix
      unbreaks migor_ts touch screen driver support.
      Signed-off-by: default avatarMagnus Damm <damm@igel.co.jp>
      Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
      ba3a1701
    • Magnus Damm's avatar
      sh: convert processor device setup functions to arch_initcall() · ba9a6337
      Magnus Damm authored
      Convert the processor platform device setup
      functions from __initcall() and sometimes
      device_initcall() to arch_initcall().
      
      This makes sure that the platform devices are
      registered a bit earlier so the devices are
      available when drivers register using initcall
      levels earlier than device_initcall().
      
      A good example is platform devices needed by
      i2c-sh_mobile.c which registers a bit earlier
      using subsys_initcall().
      Signed-off-by: default avatarMagnus Damm <damm@igel.co.jp>
      Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
      ba9a6337
    • NeilBrown's avatar
      md: allow upper limit for resync/reshape to be set when array is read-only · 4d484a4a
      NeilBrown authored
      Normally we only allow the upper limit for a reshape to be decreased
      when the array not performing a sync/recovery/reshape, otherwise there
      could be races.  But if an array is part-way through a reshape when it
      is assembled the reshape is started immediately leaving no window
      to set an upper bound.
      
      If the array is started read-only, the reshape will be suspended until
      the array becomes writable, so that provides a window during which it
      is perfectly safe to reduce the upper limit of a reshape.
      
      So: allow the upper limit (sync_max) to be reduced even if the reshape
      thread is running, as long as the array is still read-only.
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      4d484a4a
    • NeilBrown's avatar
      md/raid5: Properly remove excess drives after shrinking a raid5/6 · 1a67dde0
      NeilBrown authored
      We were removing the drives, from the array, but not
      removing symlinks from /sys/.... and not marking the device
      as having been removed.
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      1a67dde0
    • NeilBrown's avatar
      md/raid5: make sure a reshape restarts at the correct address. · a639755c
      NeilBrown authored
      This "if" don't allow for the possibility that the number of devices
      doesn't change, and so sector_nr isn't set correctly in that case.
      So change '>' to '>='.
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      a639755c
    • NeilBrown's avatar
      md/raid5: allow new reshape modes to be restarted in the middle. · 67ac6011
      NeilBrown authored
      md/raid5 doesn't allow a reshape to restart if it involves writing
      over the same part of disk that it would be reading from.
      This happens at the beginning of a reshape that increases the number
      of devices, at the end of a reshape that decreases the number of
      devices, and continuously for a reshape that does not change the
      number of devices.
      
      The current code is correct for the "increase number of devices"
      case as the critical section at the start is handled by userspace
      performing a backup.
      
      It does not work for reducing the number of devices, or the
      no-change case.
      For 'reducing', we need to invert the test.  For no-change we cannot
      really be sure things will be safe, so simply require the array
      to be read-only, which is how the user-space code which carefully
      starts such arrays works.
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      67ac6011
  3. 12 Aug, 2009 14 commits
    • NeilBrown's avatar
      md: never advance 'events' counter by more than 1. · 51d5668c
      NeilBrown authored
      When assembling arrays, md allows two devices to have different event
      counts as long as the difference is only '1'.  This is to cope with
      a system failure between updating the metadata on two difference
      devices.
      
      However there are currently times when we update the event count by
      2.  This was done to keep the event count even when the array is clean
      and odd when it is dirty, which allows us to avoid writing common
      update to spare devices and so allow those spares to go to sleep.
      
      This is bad for the above reason.  So change it to never increase by
      two.  This means that the alignment between 'odd/even' and
      'clean/dirty' might take a little longer to attain, but that is only a
      small cost.  The spares will get a few more updates but that will
      still be spared (;-) most updates and can still go to sleep.
      
      Prior to this patch there was a small chance that after a crash an
      array would fail to assemble due to the overly large event count
      mismatch.
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      51d5668c
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block · a3620f75
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.dk/linux-2.6-block:
        Remove double removal of blktrace directory
      a3620f75
    • Alan D. Brunelle's avatar
      Remove double removal of blktrace directory · 39cbb602
      Alan D. Brunelle authored
      commit fd51d251
      Author: Stefan Raspl <raspl@linux.vnet.ibm.com>
      Date:   Tue May 19 09:59:08 2009 +0200
      
          blktrace: remove debugfs entries on bad path
      
      added in an explicit invocation of debugfs_remove for bt->dir, in
      blk_remove_buf_file_callback we are also getting the directory removed. On
      occasion I am seeing memory corruption that I have bisected down to
      this commit. [The testing involves a (long) series of I/O benchmarks
      with blktrace invoked around the actual runs.] I believe that this
      committed patch is correct, but the problem actually lies in the code
      in blk_remove_buf_file_callback.
      
      With this patch I am able to consistently get complete runs whereas
      previously I could not get a single run to complete.
      
      The first part of the patch simply moves the debugfs_remove below the
      relay_close: the relay_close call will remove files under bt->dir, and
      so we should not remove the directory until all the files we created
      have been removed. (Note: This is not sufficient to fix the problem -
      the file system code has ref counts on the directoy, so our invocation
      does not cause the directory to actually be removed. Nonetheless, we
      should not rely upon that feature.)
      Signed-off-by: default avatarAlan D. Brunelle <alan.brunelle@hp.com>
      Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      39cbb602
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs · 78efd1dd
      Linus Torvalds authored
      * 'for-linus' of git://oss.sgi.com/xfs/xfs:
        xfs: fix spin_is_locked assert on uni-processor builds
        xfs: check for dinode realtime flag corruption
        use XFS_CORRUPTION_ERROR in xfs_btree_check_sblock
        xfs: switch to NOFS allocation under i_lock in xfs_attr_rmtval_get
        xfs: switch to NOFS allocation under i_lock in xfs_readlink_bmap
        xfs: switch to NOFS allocation under i_lock in xfs_attr_rmtval_set
        xfs: switch to NOFS allocation under i_lock in xfs_buf_associate_memory
        xfs: switch to NOFS allocation under i_lock in xfs_dir_cilookup_result
        xfs: switch to NOFS allocation under i_lock in xfs_da_buf_make
        xfs: switch to NOFS allocation under i_lock in xfs_da_state_alloc
        xfs: switch to NOFS allocation under i_lock in xfs_getbmap
        xfs: avoid memory allocation under m_peraglock in growfs code
      78efd1dd
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 · b637dc0d
      Linus Torvalds authored
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
        ALSA: hda - Don't override ADC definitions for ALC codecs
        ALSA: hda - Add missing vmaster initialization for ALC269
        ASoC: Add missing DRV_NAME definitions for fsl/* drivers
      b637dc0d
    • Linus Torvalds's avatar
      42c5c843
    • Linus Torvalds's avatar
      Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev · 9256a2d0
      Linus Torvalds authored
      * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
        ahci: add workaround for on-board 5723s on some gigabyte boards
        ahci: Soften up the dmesg on SB600 PMP softreset failure recovery
        Documentation/kernel-parameters.txt: document libata's ignore_hpa option
        sata_nv: MSI support, disabled by default
        libata: OCZ Vertex can't do HPA
        pata_atiixp: fix second channel support
        pata_at91: fix resource release
      9256a2d0
    • Trond Myklebust's avatar
      NFS: Fix an O_DIRECT Oops... · 1ae88b2e
      Trond Myklebust authored
      We can't call nfs_readdata_release()/nfs_writedata_release() without
      first initialising and referencing args.context. Doing so inside
      nfs_direct_read_schedule_segment()/nfs_direct_write_schedule_segment()
      causes an Oops.
      
      We should rather be calling nfs_readdata_free()/nfs_writedata_free() in
      those cases.
      
      Looking at the O_DIRECT code, the "struct nfs_direct_req" is already
      referencing the nfs_open_context for us. Since the readdata and writedata
      structures carry a reference to that, we can simplify things by getting rid
      of the extra nfs_open_context references, so that we can replace all
      instances of nfs_readdata_release()/nfs_writedata_release().
      Reported-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      Signed-off-by: default avatarTrond Myklebust <Trond.Myklebust@netapp.com>
      Tested-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      Cc: stable@kernel.org
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1ae88b2e
    • Ingo Molnar's avatar
      perf_counter, x86: Fix/improve apic fallback · 04da8a43
      Ingo Molnar authored
      Johannes Stezenbach reported that his Pentium-M based
      laptop does not have the local APIC enabled by default,
      and hence perfcounters do not get initialized.
      
      Add a fallback for this case: allow non-sampled counters
      and return with an error on sampled counters. This allows
      'perf stat' to work out of box - and allows 'perf top'
      and 'perf record' to fall back on a hrtimer based sampling
      method.
      
      ( Passing 'lapic' on the boot line will allow hardware
        sampling to occur - but if the APIC is disabled
        permanently by the hardware then this fallback still
        allows more systems to use perfcounters. )
      
      Also decouple perfcounter support from X86_LOCAL_APIC.
      
      -v2: fix typo breaking counters on all other systems ...
      Reported-by: default avatarJohannes Stezenbach <js@sig21.net>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <new-submission>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      04da8a43
    • Jens Axboe's avatar
      perf record: Add missing -C option support for specifying profile cpu · 0a5ac846
      Jens Axboe authored
      perf top supports a -C for setting the profile CPU, but perf
      record does not. This adds the same option for perf record,
      allowing the user to specify a specific target profile CPU.
      Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <20090812091801.GC12579@kernel.dk>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      0a5ac846
    • Arnaldo Carvalho de Melo's avatar
      perf tools: Fix dso__new handle() to handle deleted DSOs · 1340e6bb
      Arnaldo Carvalho de Melo authored
      It is better than showing the map addr, this way at least we
      know that we can't get the symtabs because the DSO was deleted
      (system update) while an app still used such DSO.
      
      Yeah, don't do that, but if you do, you'll figure it out
      quicker this way.
      
      [acme@doppio linux-2.6-tip]$ perf report | head -15
       # Samples: 3796
       #
       # Overhead  Command                                                        Shared Object  Symbol
       # ........  .......  ...................................................................  ......
       #
          23.55%   pidgin  /lib64/libglib-2.0.so.0.2000.4.#prelink#.Pd98lu (deleted)            [.] 0x00000000038844
          21.55%   pidgin  /lib64/libpthread-2.10.1.so.#prelink#.AFwK8Q (deleted)               [.] 0x0000000000a42d
          10.85%   pidgin  [kernel]                                                             [.] vread_hpet
           7.85%   pidgin  /lib64/libgobject-2.0.so.0.2000.4.#prelink#.o1vpU7 (deleted)         [.] 0x00000000014de8
           3.35%   pidgin  /lib64/libc-2.10.1.so (deleted)                                      [.] 0x0000000007a875
           3.19%   pidgin  /lib64/libdbus-1.so.3.4.0.#prelink#.6mwgZP (deleted)                 [.] 0x0000000001d254
           3.06%   pidgin  /usr/lib64/libgtk-x11-2.0.so.0.1600.5.#prelink#.511hAl (deleted)     [.] 0x000000002334e7
           2.90%   pidgin  /usr/lib64/libgdk-x11-2.0.so.0.1600.5.#prelink#.5qlMo1 (deleted)     [.] 0x00000000037b2d
           1.84%   pidgin  [kernel]                                                             [k] do_sys_poll
           1.45%   pidgin  /usr/lib64/libX11.so.6.2.0.#prelink#.iR59Rx (deleted)                [.] 0x0000000004c751
      [acme@doppio linux-2.6-tip]$
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Luis Claudio R. Gonçalves <lclaudio@redhat.com>
      Cc: Clark Williams <williams@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <20090811200436.GA3478@ghostprotocols.net>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      1340e6bb
    • Arnaldo Carvalho de Melo's avatar
      perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available · 247648e3
      Arnaldo Carvalho de Melo authored
      In old binutils we can't access bfd_demangle(), use
      cplus_demangle() just like oprofile.
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Luis Claudio R. Gonçalves <lclaudio@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <20090811192211.GG18061@ghostprotocols.net>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      247648e3
    • Arnaldo Carvalho de Melo's avatar
      perf report: Show the tid too in -D · 94a24752
      Arnaldo Carvalho de Melo authored
      This made it easier to find the firefox threading related
      bug.
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <20090811192138.GE18061@ghostprotocols.net>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      94a24752
    • Arnaldo Carvalho de Melo's avatar
      perf record: Fix .tid and .pid fill-in when synthesizing events · 2a8083f0
      Arnaldo Carvalho de Melo authored
      Noticed when trying to record events for a firefox thread. We
      were synthesizing both .tid and .pid with the pid passed via
      --pid.
      
      Fix it by reading /proc/PID/status and getting the tgid
      to use in .pid, .tid gets the specified "pid".
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Frédéric Weisbecker <fweisbec@gmail.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Mike Galbraith <efault@gmx.de>
      LKML-Reference: <20090811192200.GF18061@ghostprotocols.net>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      2a8083f0