- 02 Jan, 2018 30 commits
-
-
Andy Lutomirski authored
commit 0790c9aa upstream. The parameter is only present on x86_64 systems to save a few bytes, as PCID is always disabled on x86_32. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Nadav Amit <nadav.amit@gmail.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/8bbb2e65bcd249a5f18bfb8128b4689f08ac2b60.1498751203.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Lutomirski authored
commit cba4671a upstream. 32-bit kernels on new hardware will see PCID in CPUID, but PCID can only be used in 64-bit mode. Rather than making all PCID code conditional, just disable the feature on 32-bit builds. Signed-off-by:
-
Andy Lutomirski authored
commit ce4a4e56 upstream. The UP asm/tlbflush.h generates somewhat nicer code than the SMP version. Aside from that, it's fallen quite a bit behind the SMP code: - flush_tlb_mm_range() didn't flush individual pages if the range was small. - The lazy TLB code was much weaker. This usually wouldn't matter, but, if a kernel thread flushed its lazy "active_mm" more than once (due to reclaim or similar), it wouldn't be unlazied and would instead pointlessly flush repeatedly. - Tracepoints were missing. Aside from that, simply having the UP code around was a maintanence burden, since it means that any change to the TLB flush code had to make sure not to break it. Simplify everything by deleting the UP code. Signed-off-by:
-
Andy Lutomirski authored
commit ca6c99c0 upstream. flush_tlb_page() was very similar to flush_tlb_mm_range() except that it had a couple of issues: - It was missing an smp_mb() in the case where current->active_mm != mm. (This is a longstanding bug reported by Nadav Amit) - It was missing tracepoints and vm counter updates. The only reason that I can see for keeping it at as a separate function is that it could avoid a few branches that flush_tlb_mm_range() needs to decide to flush just one page. This hardly seems worthwhile. If we decide we want to get rid of those branches again, a better way would be to introduce an __flush_tlb_mm_range() helper and make both flush_tlb_page() and flush_tlb_mm_range() use it. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/3cc3847cf888d8907577569b8bac3f01992ef8f9.1495492063.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit ce27374f upstream. I'm about to rewrite the function almost completely, but first I want to get a functional change out of the way. Currently, if flush_tlb_mm_range() does not flush the local TLB at all, it will never do individual page flushes on remote CPUs. This seems to be an accident, and preserving it will be awkward. Let's change it first so that any regressions in the rewrite will be easier to bisect and so that the rewrite can attempt to change no visible behavior at all. The fix is simple: we can simply avoid short-circuiting the calculation of base_pages_to_flush. As a side effect, this also eliminates a potential corner case: if tlb_single_page_flush_ceiling == TLB_FLUSH_ALL, flush_tlb_mm_range() could have ended up flushing the entire address space one page at a time. Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/4b29b771d9975aad7154c314534fec235618175a.1492844372.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit 29961b59 upstream. I was trying to figure out what how flush_tlb_current_task() would possibly work correctly if current->mm != current->active_mm, but I realized I could spare myself the effort: it has no callers except the unused flush_tlb() macro. Signed-off-by:
-
Andy Lutomirski authored
commit 9ccee237 upstream. mark_screen_rdonly() is the last remaining caller of flush_tlb(). flush_tlb_mm_range() is potentially faster and isn't obsolete. Compile-tested only because I don't know whether software that uses this mechanism even exists. Signed-off-by:
-
Hui Wang authored
commit 285d5ddc upstream. It has the codec alc256, and add its pin definition to pin quirk table to let it apply ALC255_FIXUP_DELL1_MIC_NO_PRESENCE. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit a36c2638 upstream. Since the commit 97cc2ed2 ("ALSA: hda - Fix yet another i915 pointer leftover in error path") cleared hdac_acomp pointer, the WARN_ON() non-NULL check in snd_hdac_i915_register_notifier() may give a false-positive warning, as the function gets called no matter whether the component is registered or not. For fixing it, let's get rid of the spurious WARN_ON(). Fixes: 97cc2ed2 ("ALSA: hda - Fix yet another i915 pointer leftover in error path") Reported-by:
Kouta Okamoto <kouta.okamoto@toshiba.co.jp> Signed-off-by:
-
Johan Hovold authored
commit 15f8c5f2 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent codec node was also prematurely freed, while the child node was leaked. Fixes: 2d6d649a ("ASoC: twl4030: Support for DT booted kernel") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 695b78b5 upstream. AC'97 ops (register read / write) need SSI regmap and clock, so they have to be set after them. We also need to set these ops back to NULL if we fail the probe. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
Steve Wise authored
commit f55688c4 upstream. If the RECV CQE is in error, ignore the MSN check. This was causing recvs that were flushed into the sw cq to be completed with the wrong status (BAD_MSN instead of FLUSHED). Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 45d8b80c upstream. Two info bits were added to the "commit" part of the ring buffer data page when returned to be consumed. This was to inform the user space readers that events have been missed, and that the count may be stored at the end of the page. What wasn't handled, was the splice code that actually called a function to return the length of the data in order to zero out the rest of the page before sending it up to user space. These data bits were returned with the length making the value negative, and that negative value was not checked. It was compared to PAGE_SIZE, and only used if the size was less than PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an unsigned compare, meaning the negative size value did not end up causing a large portion of memory to be randomly zeroed out. Fixes: 66a8cb95 ("ring-buffer: Add place holder recording of dropped events") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Jing Xia authored
commit 24f2aaf9 upstream. Double free of the ring buffer happens when it fails to alloc new ring buffer instance for max_buffer if TRACER_MAX_TRACE is configured. The root cause is that the pointer is not set to NULL after the buffer is freed in allocate_trace_buffers(), and the freeing of the ring buffer is invoked again later if the pointer is not equal to Null, as: instance_mkdir() |-allocate_trace_buffers() |-allocate_trace_buffer(tr, &tr->trace_buffer...) |-allocate_trace_buffer(tr, &tr->max_buffer...) // allocate fail(-ENOMEM),first free // and the buffer pointer is not set to null |-ring_buffer_free(tr->trace_buffer.buffer) // out_free_tr |-free_trace_buffers() |-free_trace_buffer(&tr->trace_buffer); //if trace_buffer is not null, free again |-ring_buffer_free(buf->buffer) |-rb_free_cpu_buffer(buffer->buffers[cpu]) // ring_buffer_per_cpu is null, and // crash in ring_buffer_per_cpu->pages Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com Fixes: 737223fb ("tracing: Consolidate buffer allocation code") Signed-off-by:
Jing Xia <jing.xia@spreadtrum.com> Signed-off-by:
Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 4397f045 upstream. Jing Xia and Chunyan Zhang reported that on failing to allocate part of the tracing buffer, memory is freed, but the pointers that point to them are not initialized back to NULL, and later paths may try to free the freed memory again. Jing and Chunyan fixed one of the locations that does this, but missed a spot. Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com Fixes: 737223fb ("tracing: Consolidate buffer allocation code") Reported-by:
-
Steven Rostedt (VMware) authored
commit 6b7e633f upstream. The ring_buffer_read_page() takes care of zeroing out any extra data in the page that it returns. There's no need to zero it out again from the consumer. It was removed from one consumer of this function, but read_buffers_splice_read() did not remove it, and worse, it contained a nasty bug because of it. Fixes: 2711ca23 ("ring-buffer: Move zeroing out excess in page to ring buffer code") Signed-off-by:
-
Yelena Krivosheev authored
commit 4423c18e upstream. When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
Yelena Krivosheev <yelena@marvell.com> Tested-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ravi Bangoria authored
commit f41d84dd upstream. It's theoretically possible that branch instructions recorded in BHRB (Branch History Rolling Buffer) entries have already been unmapped before they are processed by the kernel. Hence, trying to dereference such memory location will result in a crash. eg: Unable to handle kernel paging request for data at address 0xd000000019c41764 Faulting instruction address: 0xc000000000084a14 NIP [c000000000084a14] branch_target+0x4/0x70 LR [c0000000000eb828] record_and_restart+0x568/0x5c0 Call Trace: [c0000000000eb3b4] record_and_restart+0xf4/0x5c0 (unreliable) [c0000000000ec378] perf_event_interrupt+0x298/0x460 [c000000000027964] performance_monitor_exception+0x54/0x70 [c000000000009ba4] performance_monitor_common+0x114/0x120 Fix it by deferefencing the addresses safely. Fixes: 69123184 ("powerpc/perf: Fix setting of "to" addresses for BHRB") Suggested-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Paolo Bonzini authored
commit fae1a3e7 upstream. rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then CR4 & ~PCIDE, then CR0, then CR4. However, setting CR4.PCIDE fails if CR3[11:0] != 0. It's probably easier in the long run to replace rsm_enter_protected_mode() with an emulator callback that sets all the special registers (like KVM_SET_SREGS would do). For now, set the PCID field of CR3 only after CR4.PCIDE is 1. Reported-by:
Laszlo Ersek <lersek@redhat.com> Tested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Wanpeng Li authored
commit d73235d1 upstream. *** Guest State *** CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871 CR3 = 0x00000000fffbc000 RSP = 0x0000000000000000 RIP = 0x0000000000000000 RFLAGS=0x00000000 DR7 = 0x0000000000000400 ^^^^^^^^^^ The failed vmentry is triggered by the following testcase when ept=Y: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_regs regs = { .rflags = 0, }; ioctl(r[4], KVM_SET_REGS, ®s); ioctl(r[4], KVM_RUN, 0); } X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1 of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails. This patch fixes it by oring X86_EFLAGS_FIXED during ioctl. Suggested-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Quan Xu <quan.xu0@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 5a1314fa upstream. When the core is configured in C_SPI_MODE > 0, it integrates a lookup table that automatically configures the core in dual or quad mode based on the command (first byte on the tx fifo). Unfortunately, that list mode_?_memoy_*.mif does not contain all the supported commands by the flash. Since 4.14 spi-nor automatically tries to probe the flash using SFDP (command 0x5a), and that command is not part of the list_mode table. Whit the right combination of C_SPI_MODE and C_SPI_MEMORY this leads into a stall that can only be recovered with a soft rest. This patch detects this kind of stall and returns -EIO to the caller on those commands. spi-nor can handle this error properly: m25p80 spi0.0: Detected stall. Check C_SPI_MODE and C_SPI_MEMORY. 0x21 0x2404 m25p80 spi0.0: SPI transfer failed: -5 spi_master spi0: failed to transfer one message from queue m25p80 spi0.0: s25sl064p (8192 Kbytes) Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Helge Deller authored
commit bcf3f175 upstream. Diva GSP card has built-in serial AUX port and ATI graphic card which simply don't work and which both don't have external connectors. User Guides even mention that those devices shouldn't be used. So, prevent that Linux drivers try to enable those devices. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Rafael J. Wysocki authored
commit 5839ee73 upstream. It is incorrect to call pci_restore_state() for devices in low-power states (D1-D3), as that involves the restoration of MSI setup which requires MMIO to be operational and that is only the case in D0. However, pci_pm_thaw_noirq() may do that if the driver's "freeze" callbacks put the device into a low-power state, so fix it by making it force devices into D0 via pci_set_power_state() instead of trying to "update" their power state which is pointless. Fixes: e60514bd (PCI/PM: Restore the status of PCI devices across hibernation) Reported-by:
Maarten Lankhorst <dev@mblankhorst.nl> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Takashi Iwai authored
commit 5a15f289 upstream. The commit 89b89d12 ("ALSA: usb-audio: Add check return value for usb_string()") added the check of the return value from snd_usb_copy_string_desc(), which is correct per se, but it introduced a regression. In the original code, either the "Clock Source", "Playback Source" or "Capture Source" suffix is added after the terminal string, while the commit changed it to add the suffix only when get_term_name() is failing. It ended up with an incorrect ctl name like "PCM" instead of "PCM Capture Source". Also, even the original code has a similar bug: when the ctl name is generated from snd_usb_copy_string_desc() for the given iSelector, it also doesn't put the suffix. This patch addresses these issues: the suffix is added always when no static mapping is found. Also the patch tries to put more comments and cleans up the if/else block for better readability in order to avoid the same pitfall again. Fixes: 89b89d12 ("ALSA: usb-audio: Add check return value for usb_string()") Reported-and-tested-by:
Mauro Santos <registo.mailling@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit c1cfd902 upstream. The rawmidi also allows to obtaining the information via ioctl of ctl API. It means that user can issue an ioctl to the rawmidi device even when it's being removed as long as the control device is present. Although the code has some protection via the global register_mutex, its range is limited to the search of the corresponding rawmidi object, and the mutex is already unlocked at accessing the rawmidi object. This may lead to a use-after-free. For avoiding it, this patch widens the application of register_mutex to the whole snd_rawmidi_info_select() function. We have another mutex per rawmidi object, but this operation isn't very hot path, so it shouldn't matter from the performance POV. Signed-off-by:
-
Johan Hovold authored
commit 85e9b13c upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Note that the CONFIG_OF compile guard can be removed as of_get_child_by_name() provides a !CONFIG_OF implementation which always fails. Fixes: 37e13cec ("mfd: Add support for Device Tree to twl6040") Fixes: ca2cad6a ("mfd: Fix twl6040 build failure") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 0a423772 upstream. A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while leaking any matching node. To make things worse, any matching node would not even necessarily be a child node as the whole device tree was searched depth-first starting at the parent. Fixes: 019a7e6b ("mfd: twl4030-audio: Add DT support") Signed-off-by:
-
Jon Hunter authored
commit 15d83748 upstream. On the Tegra124 Nyan-Big chromebook the very first SPI message sent to the EC is failing. The Tegra SPI driver configures the SPI chip-selects to be active-high by default (and always has for many years). The EC SPI requires an active-low chip-select and so the Tegra chip-select is reconfigured to be active-low when the EC SPI driver calls spi_setup(). The problem is that if the first SPI message to the EC is sent too soon after reconfiguring the SPI chip-select, it fails. The EC SPI driver prevents back-to-back SPI messages being sent too soon by keeping track of the time the last transfer was sent via the variable 'last_transfer_ns'. To prevent the very first transfer being sent too soon, initialise the 'last_transfer_ns' variable after calling spi_setup() and before sending the first SPI message. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 9abffc6f upstream. mcryptd_enqueue_request() grabs the per-CPU queue struct and protects access to it with disabled preemption. Then it schedules a worker on the same CPU. The worker in mcryptd_queue_worker() guards access to the same per-CPU variable with disabled preemption. If we take CPU-hotplug into account then it is possible that between queue_work_on() and the actual invocation of the worker the CPU goes down and the worker will be scheduled on _another_ CPU. And here the preempt_disable() protection does not work anymore. The easiest thing is to add a spin_lock() to guard access to the list. Another detail: mcryptd_queue_worker() is not processing more than MCRYPTD_BATCH invocation in a row. If there are still items left, then it will invoke queue_work() to proceed with more later. *I* would suggest to simply drop that check because it does not use a system workqueue and the workqueue is already marked as "CPU_INTENSIVE". And if preemption is required then the scheduler should do it. However if queue_work() is used then the work item is marked as CPU unbound. That means it will try to run on the local CPU but it may run on another CPU as well. Especially with CONFIG_DEBUG_WQ_FORCE_RR_CPU=y. Again, the preempt_disable() won't work here but lock which was introduced will help. In order to keep work-item on the local CPU (and avoid RR) I changed it to queue_work_on(). Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Takashi Iwai authored
commit bb82e0b4 upstream. The commit f6f82851 ("pstore: pass allocated memory region back to caller") changed the check of the return value from erst_read() in erst_reader() in the following way: if (len == -ENOENT) goto skip; - else if (len < 0) { - rc = -1; + else if (len < sizeof(*rcd)) { + rc = -EIO; goto out; This introduced another bug: since the comparison with sizeof() is cast to unsigned, a negative len value doesn't hit any longer. As a result, when an error is returned from erst_read(), the code falls through, and it may eventually lead to some weird thing like memory corruption. This patch adds the negative error value check more explicitly for addressing the issue. Fixes: f6f82851 (pstore: pass allocated memory region back to caller) Tested-by:
Jerry Tang <jtang@suse.com> Signed-off-by:
-
- 25 Dec, 2017 10 commits
-
-
Greg Kroah-Hartman authored
-
Sudip Mukherjee authored
commit 8ee912da upstream. The build of alpha allmodconfig is giving error: arch/alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm': arch/alpha/include/asm/mmu_context.h:160:2: error: implicit declaration of function 'task_thread_info'; did you mean 'init_thread_info'? [-Werror=implicit-function-declaration] The file 'mmu_context.h' needed an extra header file. Link: http://lkml.kernel.org/r/1505668810-7497-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Takashi Iwai authored
commit 97cc2ed2 upstream. The hdac_acomp object in hdac_i915.c is left as assigned even after binding with i915 actually fails, and this leads to the WARN_ON() at the next load of the module. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94736Signed-off-by:
-
Takashi Iwai authored
commit bed2e98e upstream. Currently HD-audio driver on Intel Skylake or Broxteon gives an error message when binding with i915 audio component fails. However, this isn't any serious error on a system without Intel graphics. Indeed there are such systems, where a third-party codec (e.g. Creative) is put on the mobo while using other discrete GPU (e.g. Nvidia). Printing a kernel "error" message is overreaction in such a case. This patch downgrades the print level for that message. For systems that mandate the i915 binding (e.g. Haswell or Broadwell HDMI/DP), another kernel error message is shown in addition to make clear what went wrong. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021Signed-off-by:
-
Takashi Iwai authored
commit faafd03d upstream. The commit [d745f5e7: ALSA: hda - Add the pin / port mapping on Intel ILK and VLV] introduced a WARN_ON() to check the pointer for avoiding the double initializations. But hdac_acomp pointer wasn't cleared at snd_hdac_i915_exit(), thus after reloading the HD-audio driver, it may result in the false positive warning. This patch makes sure to clear the leftover pointer at exit. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94736Reported-by:
Daniela Doras-prodan <daniela.doras-prodan@intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit ffc75657 which is commit a0085f25 upstream. It causes problems with working systems, as noted by a number of the ChromeOS developers. Cc: Sukumar Ghorai <sukumar.ghorai@intel.com> Cc: Amit K Bag <amit.k.bag@intel.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Matthias Kaehlcke <mka@chromium.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
-
Aleksandar Markovic authored
commit 409fcace upstream. Fix final phase of <CLASS|MADDF|MSUBF|MAX|MIN|MAXA|MINA>.<D|S> emulation. Provide proper generation of SIGFPE signal and updating debugfs FP exception stats in cases of any exception flags set in preceding phases of emulation. CLASS.<D|S> instruction may generate "Unimplemented Operation" FP exception. <MADDF|MSUBF>.<D|S> instructions may generate "Inexact", "Unimplemented Operation", "Invalid Operation", "Overflow", and "Underflow" FP exceptions. <MAX|MIN|MAXA|MINA>.<D|S> instructions can generate "Unimplemented Operation" and "Invalid Operation" FP exceptions. The proper final processing of the cases when any FP exception flag is set is achieved by replacing "break" statement with "goto copcsr" statement. With such solution, this patch brings the final phase of emulation of the above instructions consistent with the one corresponding to the previously implemented emulation of other related FPU instructions (ADD, SUB, etc.). Fixes: 38db37ba ("MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction") Fixes: e24c3bec ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction") Fixes: 83d43305 ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction") Fixes: a79f5f9b ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction") Fixes: 4e9561b2 ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction") Signed-off-by:
Aleksandar Markovic <aleksandar.markovic@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Douglas Leung <douglas.leung@mips.com> Cc: Goran Ferenc <goran.ferenc@mips.com> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: Miodrag Dinic <miodrag.dinic@mips.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Petar Jovanovic <petar.jovanovic@mips.com> Cc: Raghu Gandham <raghu.gandham@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17581/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Arvind Yadav authored
commit 919054fd upstream. clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
Kevin Wangtao <kevin.wangtao@hisilicon.com> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit f187851b ] When failing to enter broadcast timer mode for an idle state that requires it, a new state is selected that does not require broadcast, but the broadcast variable remains set. This causes tick_broadcast_exit to be called despite not having entered broadcast mode. This causes the WARN_ON_ONCE(!irqs_disabled()) to trigger in some cases. It does not appear to cause problems for code today, but seems to violate the interface so should be fixed. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 74717b28 ] If there is any non expired timer in the queue, the RTC alarm is never set. This is an issue when adding a timer that expires before the next non expired timer. Ensure the RTC alarm is set in that case. Fixes: 2b2f5ff0 ("rtc: interface: ignore expired timers when enqueuing new timers") Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
