- 01 Nov, 2021 31 commits
-
-
Viresh Kumar authored
The virtio specification received a new mandatory feature (VIRTIO_I2C_F_ZERO_LENGTH_REQUEST) for zero length requests. Fail if the feature isn't offered by the device. For each read-request, set the VIRTIO_I2C_FLAGS_M_RD flag, as required by the VIRTIO_I2C_F_ZERO_LENGTH_REQUEST feature. This allows us to support zero length requests, like SMBUS Quick, where the buffer need not be sent anymore. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/7c58868cd26d2fc4bd82d0d8b0dfb55636380110.1634808714.git.viresh.kumar@linaro.orgSigned-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by: Jie Deng <jie.deng@intel.com> # once the spec is merged
-
Ye Guojin authored
coccicheck complains about the use of snprintf() in sysfs show functions: WARNING use scnprintf or sprintf Use sysfs_emit instead of scnprintf or sprintf makes more sense. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Ye Guojin <ye.guojin@zte.com.cn> Link: https://lore.kernel.org/r/20211021065111.1047824-1-ye.guojin@zte.com.cnSigned-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com>
-
Jason Wang authored
We're actually tracking descriptor address and length instead of the buffer. Signed-off-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211019070152.8236-7-jasowang@redhat.comSigned-off-by:
-
Jason Wang authored
This patch tries to make sure the virtio interrupt handler for INTX won't be called after a reset and before virtio_device_ready(). We can't use IRQF_NO_AUTOEN since we're using shared interrupt (IRQF_SHARED). So this patch tracks the INTX enabling status in a new intx_soft_enabled variable and toggle it during in vp_disable/enable_vectors(). The INTX interrupt handler will check intx_soft_enabled before processing the actual interrupt. Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Signed-off-by:
-
Jason Wang authored
We used to synchronize pending MSI-X irq handlers via synchronize_irq(), this may not work for the untrusted device which may keep sending interrupts after reset which may lead unexpected results. Similarly, we should not enable MSI-X interrupt until the device is ready. So this patch fixes those two issues by: 1) switching to use disable_irq() to prevent the virtio interrupt handlers to be called after the device is reset. 2) using IRQF_NO_AUTOEN and enable the MSI-X irq during .ready() This can make sure the virtio interrupt handler won't be called before virtio_device_ready() and after reset. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Signed-off-by:
-
Jason Wang authored
This patch introduces a new method to enable the callbacks for config and virtqueues. This will be used for making sure the virtqueue callbacks are only enabled after virtio_device_ready() if transport implements this method. Signed-off-by:
-
Jason Wang authored
We calculate nr_ports based on the max_nr_ports: nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2; If the device advertises a large max_nr_ports, we will end up with a integer overflow. Fixing this by validating the max_nr_ports and fail the probe for invalid max_nr_ports in this case. Cc: Amit Shah <amit@kernel.org> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211025102240.22801-1-colin.i.king@gmail.comSigned-off-by:
Max Gurtovoy <mgurtovoy@nvidia.com> Acked-by:
-
Jason Wang authored
If an untrusted device neogitates BLK_F_MQ but advertises a zero num_queues, the driver may end up trying to allocating zero size buffers where ZERO_SIZE_PTR is returned which may pass the checking against the NULL. This will lead unexpected results. Fixing this by failing the probe in this case. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Pankaj Gupta authored
Adding myself as virtio-pmem maintainer and also adding virtualization mailing list entry for virtio specific bits. Helps to get notified for appropriate bug fixes & enhancements. Signed-off-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Link: https://lore.kernel.org/r/20211016090646.371145-1-pankaj.gupta.linux@gmail.comSigned-off-by:
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Also, make use of the struct_size() helper in kzalloc(). [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20210929191504.GA337268@embeddedorSigned-off-by:
-
Xuan Zhuo authored
When using indirect with packed, we don't check for allocation failures. This patch checks that and fall back on direct. Fixes: 1ce9e605 ("virtio_ring: introduce packed ring support") Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20211020112323.67466-3-xuanzhuo@linux.alibaba.comSigned-off-by:
-
Xuan Zhuo authored
Align the arguments of virtqueue_add_indirect_packed() to the open ( to make it look prettier. Signed-off-by:
-
Laurent Vivier authored
If we ensure we have already some data available by enqueuing again the buffer once data are exhausted, we can return what we have without waiting for the device answer. Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20211028101111.128049-5-lvivier@redhat.comSigned-off-by:
-
Laurent Vivier authored
if we don't use all the entropy available in the buffer, keep it and use it later. Signed-off-by:
-
Laurent Vivier authored
When virtio-rng device was dropped by the hwrng core we were forced to wait the buffer to come back from the device to not have remaining ongoing operation that could spoil the buffer. But now, as the buffer is internal to the virtio-rng we can release the waiting loop immediately, the buffer will be retrieve and use when the virtio-rng driver will be selected again. This avoids to hang on an rng_current write command if the virtio-rng device is blocked by a lack of entropy. This allows to select another entropy source if the current one is empty. Signed-off-by:
-
Laurent Vivier authored
hwrng core uses two buffers that can be mixed in the virtio-rng queue. If the buffer is provided with wait=0 it is enqueued in the virtio-rng queue but unused by the caller. On the next call, core provides another buffer but the first one is filled instead and the new one queued. And the caller reads the data from the new one that is not updated, and the data in the first one are lost. To avoid this mix, virtio-rng needs to use its own unique internal buffer at a cost of a data copy to the caller buffer. Signed-off-by:
-
Eli Cohen authored
Add code to register to hardware asynchronous events. Use this mechanism to track link status events coming from the device and update the config struct. After doing link status change, call the vdpa callback to notify of the link status change. Signed-off-by:
Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210909123635.30884-4-elic@nvidia.comSigned-off-by:
-
Eli Cohen authored
A subesequent patch will use the same workqueue for executing other work not related to control VQ. Rename the workqueue and the work queue entry used to convey information to the workqueue. Signed-off-by:
-
Eli Cohen authored
No need to save the mtu int the net device struct. We can save it in the config struct which cannot be modified. Moreover, move the initialization to. mlx5_vdpa_set_features() callback is not the right place to put it. Signed-off-by:
-
Wu Zongyong authored
This patch adds a new vDPA driver for Alibaba ENI(Elastic Network Interface) which is build upon virtio 0.9.5 specification. And this driver is only enabled on X86 host currently. Link: https://lore.kernel.org/r/6a9f32c00609af16bbb2ea32e633b3beb1cbf84b.1635493219.git.wuzongyong@linux.alibaba.comSigned-off-by:
Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/20211026083214.3375383-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> # fix Kconfig typo Signed-off-by:
-
Wu Zongyong authored
This attribute advertises the min value of virtqueue size. The value is 1 by default. Signed-off-by:
-
Wu Zongyong authored
For the devices which implement the get_vq_num_min callback, the driver should not negotiate with virtqueue size with the backend vdpa device if the value returned by get_vq_num_min equals to the value returned by get_vq_num_max. This is useful for vdpa devices based on legacy virtio specfication. Signed-off-by:
-
Wu Zongyong authored
Just failed to probe the vdpa device if the min virtqueue num returned by get_vq_num_min is greater than the max virtqueue num returned by get_vq_num_max. Signed-off-by:
-
Wu Zongyong authored
This callback is optional. For vdpa devices that not support to change virtqueue size, get_vq_num_min and get_vq_num_max will return the same value, so that users can choose a correct value for that device. Suggested-by:
-
Wu Zongyong authored
This patch implements the get_vq_irq() callback for virtio pci devices to allow irq offloading. Signed-off-by:
-
Wu Zongyong authored
Signed-off-by:
-
Wu Zongyong authored
Split common codes from virtio-pci-legacy so vDPA driver can reuse it later. Signed-off-by:
-
Max Gurtovoy authored
Sometimes a user would like to control the amount of request queues to be created for a block device. For example, for limiting the memory footprint of virtio-blk devices. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Max Gurtovoy authored
No need to pre-allocate a big buffer for the IO SGL anymore. If a device has lots of deep queues, preallocation for the sg list can consume substantial amounts of memory. For HW virtio-blk device, nr_hw_queues can be 64 or 128 and each queue's depth might be 128. This means the resulting preallocation for the data SGLs is big. Switch to runtime allocation for SGL for lists longer than 2 entries. This is the approach used by NVMe drivers so it should be reasonable for virtio block as well. Runtime SGL allocation has always been the case for the legacy I/O path so this is nothing new. The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't support SG_CHAIN, use only runtime allocation for the SGL. Re-organize the setup of the IO request to fit the new sg chain mechanism. No performance degradation was seen (fio libaio engine with 16 jobs and 128 iodepth): IO size IOPs Rand Read (before/after) IOPs Rand Write (before/after) -------- --------------------------------- ---------------------------------- 512B 318K/316K 329K/325K 4KB 323K/321K 353K/349K 16KB 199K/208K 250K/275K 128KB 36K/36.1K 39.2K/41.7K Signed-off-by:
Israel Rukshin <israelr@nvidia.com> Link: https://lore.kernel.org/r/20210901131434.31158-1-mgurtovoy@nvidia.comReviewed-by:
Feng Li <lifeng1519@gmail.com> Reviewed-by:
-
Michael S. Tsirkin authored
Make tailroom math follow same logic as everything else, subtracing values in the order in which things are laid out in the buffer. Tested-by:
Corentin Noël <corentin.noel@collabora.com> Signed-off-by:
-
- 31 Oct, 2021 7 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix compilation of callchain related code on powerpc with gcc11+ - Fix PERF_SAMPLE_WEIGHT_STRUCT support in 'perf script' - Check session->header.env.arch before using it, fixing a segmentation fault - Suppress 'rm dlfilter' build messages * tag 'perf-tools-fixes-for-v5.15-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT support perf callchain: Fix compilation on powerpc with gcc11+ perf script: Check session->header.env.arch before using it perf build: Suppress 'rm dlfilter' build message
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: - Fixes for s390 interrupt delivery - Fixes for Xen emulator bugs showing up as debug kernel WARNs - Fix another issue with SEV/ES string I/O VMGEXITs * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Take srcu lock in post_kvm_run_save() KVM: SEV-ES: fix another issue with string I/O VMGEXITs KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block() KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu KVM: s390: clear kicked_mask before sleeping again
-
Kan Liang authored
-F weight in perf script is broken. # ./perf mem record # ./perf script -F weight Samples for 'dummy:HG' event do not have WEIGHT attribute set. Cannot print 'weight' field. The sample type, PERF_SAMPLE_WEIGHT_STRUCT, is an alternative of the PERF_SAMPLE_WEIGHT sample type. They share the same space, weight. The lower 32 bits are exactly the same for both sample type. The higher 32 bits may be different for different architecture. For a new kernel on x86, the PERF_SAMPLE_WEIGHT_STRUCT is used. For an old kernel or other ARCHs, the PERF_SAMPLE_WEIGHT is used. With -F weight, current perf script will only check the input string "weight" with the PERF_SAMPLE_WEIGHT sample type. Because the commit ea8d0ed6 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") didn't update the PERF_SAMPLE_WEIGHT_STRUCT sample type for perf script. For a new kernel on x86, the check fails. Use PERF_SAMPLE_WEIGHT_TYPE, which supports both sample types, to replace PERF_SAMPLE_WEIGHT Fixes: ea8d0ed6 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") Reported-by:
Joe Mario <jmario@redhat.com> Reviewed-by:
Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Tested-by:
Jiri Olsa <jolsa@redhat.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Got following build fail on powerpc: CC arch/powerpc/util/skip-callchain-idx.o In function ‘check_return_reg’, inlined from ‘check_return_addr’ at arch/powerpc/util/skip-callchain-idx.c:213:7, inlined from ‘arch_skip_callchain_idx’ at arch/powerpc/util/skip-callchain-idx.c:265:7: arch/powerpc/util/skip-callchain-idx.c:54:18: error: ‘dwarf_frame_register’ accessing 96 bytes \ in a region of size 64 [-Werror=stringop-overflow=] 54 | result = dwarf_frame_register(frame, ra_regno, ops_mem, &ops, &nops); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/util/skip-callchain-idx.c: In function ‘arch_skip_callchain_idx’: arch/powerpc/util/skip-callchain-idx.c:54:18: note: referencing argument 3 of type ‘Dwarf_Op *’ In file included from /usr/include/elfutils/libdwfl.h:32, from arch/powerpc/util/skip-callchain-idx.c:10: /usr/include/elfutils/libdw.h:1069:12: note: in a call to function ‘dwarf_frame_register’ 1069 | extern int dwarf_frame_register (Dwarf_Frame *frame, int regno, | ^~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors The dwarf_frame_register args changed with [1], Updating ops_mem accordingly. [1] https://sourceware.org/git/?p=elfutils.git;a=commit;h=5621fe5443da23112170235dd5cac161e5c75e65Reviewed-by:Mark Wieelard <mjw@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20210928195253.1267023-1-jolsa@kernel.orgSigned-off-by:
-
Song Liu authored
When perf.data is not written cleanly, we would like to process existing data as much as possible (please see f_header.data.size == 0 condition in perf_session__read_header). However, perf.data with partial data may crash perf. Specifically, we see crash in 'perf script' for NULL session->header.env.arch. Fix this by checking session->header.env.arch before using it to determine native_arch. Also split the if condition so it is easier to read. Committer notes: If it is a pipe, we already assume is a native arch, so no need to check session->header.env.arch. Signed-off-by:
Song Liu <songliubraving@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211004053238.514936-1-songliubraving@fb.comSigned-off-by:
-
Adrian Hunter authored
The following build message: rm dlfilters/dlfilter-test-api-v0.o is unwanted. The object file is being treated as an intermediate file and being automatically removed. Mark the object file as .SECONDARY to prevent removal and hence the message. Requested-by:
Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210930062849.110416-1-adrian.hunter@intel.comSigned-off-by:
-
- 30 Oct, 2021 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three small fixes, all in drivers, and one sizeable update to the UFS driver to remove the HPB 2.0 feature that has been objected to by Jens and Christoph. Although the UFS patch is large and last minute, it's essentially the least intrusive way of resolving the objections in time for the 5.15 release" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufshpb: Remove HPB2.0 flows scsi: mpt3sas: Fix reference tag handling for WRITE_INSERT scsi: ufs: ufs-exynos: Correct timeout value setting registers scsi: ibmvfc: Fix up duplicate response detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One fix for the composite clk that broke when we changed this clk type to use the determine_rate instead of round_rate clk op by default. This caused lots of problems on Rockchip SoCs because they heavily use the composite clk code to model the clk tree" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: composite: Also consider .determine_rate for rate + mux composites
-
