- 27 Mar, 2020 20 commits
-
-
Jacob Keller authored
Add a devlink region for exposing the device's Non Volatime Memory flash contents. Support the recently added .snapshot operation, enabling userspace to request a snapshot of the NVM contents via DEVLINK_CMD_REGION_NEW. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Implement the .snapshot region operation for the dummy data region. This enables a region snapshot to be taken upon request via the new DEVLINK_CMD_REGION_SNAPSHOT command. Signed-off-by:
-
Jacob Keller authored
Implement support for the DEVLINK_CMD_REGION_NEW command for creating snapshots. This new command parallels the existing DEVLINK_CMD_REGION_DEL. In order for DEVLINK_CMD_REGION_NEW to work for a region, the new ".snapshot" operation must be implemented in the region's ops structure. The desired snapshot id must be provided. This helps avoid confusion on the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler. The requested id will be inserted into the xarray tracking the number of snapshots using each id. If this id is already used by another snapshot on any region, an error will be returned. Signed-off-by:
-
Jacob Keller authored
Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by:
-
Jacob Keller authored
The devlink_snapshot_id_get() function returns a snapshot id. The snapshot id is a u32, so there is no way to indicate an error code. A future change is going to possibly add additional cases where this function could fail. Refactor the function to return the snapshot id in an argument, so that it can return zero or an error value. This ensures that snapshot ids cannot be confused with error values, and aids in the future refactor of snapshot id allocation management. Because there is no current way to release previously used snapshot ids, add a simple check ensuring that an error is reported in case the snapshot_id would over flow. Signed-off-by:
-
Jacob Keller authored
A future change is going to implement a new devlink command to request a snapshot on demand. As part of this, the logic for handling the snapshot ids will be refactored. To simplify the snapshot id allocation function, move it to a separate function prefixed by `__`. This helper function will assume the lock is held. While no other callers will exist, it simplifies refactoring the logic because there is no need to complicate the function with gotos to handle unlocking on failure. Signed-off-by:
-
Jacob Keller authored
The devlink_region_snapshot_create function returns -ENOMEM when the maximum number of snapshots has been reached. This is confusing because it is not an issue of being out of memory. Change this to use -ENOSPC instead. Reported-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Jacob Keller authored
A future change is going to add a new devlink command to request a snapshot on demand. This function will want to call the devlink_region_snapshot_create function while already holding the devlink instance lock. Extract the logic of this function into a static function prefixed by `__` to indicate that it is an internal helper function. Modify the original function to be implemented in terms of the new locked function. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jacob Keller authored
The function documentation comment for devlink_region_snapshot_create included a literal tab character between 'future analyses' that was difficult to spot as it happened to only display as one space wide. Fix the comment to use a space here instead of a stray tab appearing in the middle of a sentence. Signed-off-by:
-
Jacob Keller authored
It does not makes sense that two snapshots for a given region would use different destructors. Simplify snapshot creation by adding a .destructor op for regions. This operation will replace the data_destructor for the snapshot creation, and makes snapshot creation easier. Noticed-by:
-
Jacob Keller authored
Modify the devlink region code in preparation for adding new operations on regions. Create a devlink_region_ops structure, and move the name pointer from within the devlink_region structure into the ops structure (similar to the devlink_health_reporter_ops). This prepares the regions to enable support of additional operations in the future such as requesting snapshots, or accessing the region directly without a snapshot. In order to re-use the constant strings in the mlx4 driver their declaration must be changed to 'const char * const' to ensure the compiler realizes that both the data and the pointer cannot change. Signed-off-by:
-
David S. Miller authored
Lorenzo Bianconi says: ==================== veth: move ndo_xdp_xmit stats to peer veth_rq Move ndo_xdp_xmit ethtool stats accounting to peer veth_rq. Move XDP_TX accounting to veth_xdp_flush_bq routine. Changes since v1: - rename xdp_xmit[_err] counters to peer_tq_xdp_xmit[_err] ==================== Signed-off-by: -
Lorenzo Bianconi authored
Rely on 'remote' veth_rq to account ndo_xdp_xmit ethtool counters. Move XDP_TX accounting to veth_xdp_flush_bq routine. Remove 'rx' prefix in rx xdp ethool counters Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by:
-
Lorenzo Bianconi authored
Substitute net_device point with veth_rq one in veth_xdp_flush_bq, veth_xdp_flush and veth_xdp_tx signature. This is a preliminary patch to account xdp_xmit counter on 'receiving' veth_rq Acked-by:
-
Wolfram Sang authored
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Wolfram Sang authored
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== Implement stats_update callback for pedit and skbedit The stats_update callback is used for adding HW counters to the SW ones. Both skbedit and pedit actions are actually recognized by flow_offload.h, but do not implement these callbacks. As a consequence, the reported values are only the SW ones, even where there is a HW counter available. Patch #1 adds the callback to action skbedit, patch #2 adds it to action pedit. Patch #3 tweaks an skbedit selftest with a check that would have caught this problem. The pedit test is not likewise tweaked, because the iproute2 pedit action currently does not support JSON dumping. This will be addressed later. ==================== Signed-off-by: -
Petr Machata authored
Currently the test checks the observable effect of skbedit priority: queueing of packets at the correct qdisc band. It therefore misses the fact that the counters for offloaded rules are not updated. Add an extra check for the counter. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Petr Machata authored
Implement this callback in order to get the offloaded stats added to the kernel stats. Reported-by:
Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by:
-
Petr Machata authored
Implement this callback in order to get the offloaded stats added to the kernel stats. Reported-by:
-
- 26 Mar, 2020 20 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Offload TC action pedit munge dsfield Petr says: The Spectrum switches allow packet prioritization based on DSCP on ingress, and update of DSCP on egress. This is configured through the DCB APP rules. For some use cases, assigning a custom DSCP value based on an ACL match is a better tool. To that end, offload FLOW_ACTION_MANGLE to permit changing of dsfield as a whole, or DSCP and ECN values in isolation. After fixing a commentary nit in patch #1, and mlxsw naming in patch #2, patches #3 and #4 add the offload to mlxsw. Patch #5 adds a forwarding selftest for pedit dsfield, applicable to SW as well as HW datapaths. Patch #6 adds a mlxsw-specific test to verify DSCP rewrite due to DCB APP rules is not performed on pedited packets. The tests only cover IPv4 dsfield setting. We have tests for IPv6 as well, but would like to postpone their contribution until the corresponding iproute patches have been accepted. ==================== Signed-off-by: -
Petr Machata authored
When DSCP is updated through an offloaded pedit action, DSCP rewrite on egress should be disabled. Add a test that check that it is so. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
Add a test that runs packets with dsfield set, and test that pedit adjusts the DSCP or ECN parts or the whole field. Signed-off-by:
-
Petr Machata authored
Offload action pedit ex munge when used with a flower classifier. Only allow setting of DSCP, ECN, or the whole DSField in IPv4 and IPv6 packets. Signed-off-by:
-
Petr Machata authored
The QOS_ACTION is used for manipulating the QOS attributes of the packet. Add the defines and helpers related to DSCP and ECN fields, and dscp_rw. Signed-off-by:
-
Petr Machata authored
The original idea was to reuse this set of actions for ECN rewrite as well, but on second look, it's not such a great idea. These two items should each have its own command. Rename the existing enum to make it obvious that it belongs to switch_prio_cmd. Signed-off-by:
-
Petr Machata authored
This field references FLOW_ACTION_PACKET_EDIT. Such action does not exist though. Instead the field is used for FLOW_ACTION_MANGLE and _ADD. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2020-03-25 1) Cleanups from Dan Carpenter and wenxu. 2) Paul and Roi, Some minor updates and fixes to E-Switch to address issues introduced in the previous reg_c0 updates series. 3) Eli Cohen simplifies and improves flow steering matching group searches and flow table entries version management. 4) Parav Pandit, improves devlink eswitch mode changes thread safety. By making devlink rely on driver for thread safety and introducing mlx5 eswitch mode change protection. ==================== Signed-off-by: -
YueHaibing authored
drivers/net/ethernet/atheros/atlx/atl2.c:40:19: warning: ‘atl2_driver_string’ defined but not used [-Wunused-const-variable=] static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver"; ^~~~~~~~~~~~~~~~~~ commit ea973742 ("net/atheros: Clean atheros code from driver version") left behind this, remove it. Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Hoang Le authored
In the commit f73b1281 ("tipc: improve throughput between nodes in netns"), we're missing a check to handle TIPC_DIRECT_MSG type, it's still using old sending mechanism for this message type. So, throughput improvement is not significant as expected. Besides that, when sending a large message with that type, we're also handle wrong receiving queue, it should be enqueued in socket receiving instead of multicast messages. Fix this by adding the missing case for TIPC_DIRECT_MSG. Fixes: f73b1281 ("tipc: improve throughput between nodes in netns") Reported-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
Parav Pandit authored
Currently eswitch mode change is occurring from 2 different execution contexts as below. 1. sriov sysfs enable/disable 2. devlink eswitch set commands Both of them need to access eswitch related data structures in synchronized manner. Without any synchronization below race condition exist. SR-IOV enable/disable with devlink eswitch mode change: cpu-0 cpu-1 ----- ----- mlx5_device_disable_sriov() mlx5_devlink_eswitch_mode_set() mlx5_eswitch_disable() esw_offloads_stop() esw_offloads_disable() mlx5_eswitch_disable() esw_offloads_disable() Hence, they are synchronized using a new mode_lock. eswitch's state_lock is not used as it can lead to a deadlock scenario below and state_lock is only for vport and fdb exclusive access. ip link set vf <param> netlink rcv_msg() - Lock A rtnl_lock vfinfo() esw->state_lock() - Lock B devlink eswitch_set devlink_mutex esw->state_lock() - Lock B attach_netdev() register_netdev() rtnl_lock - Lock A Alternatives considered: 1. Acquiring rtnl lock before taking esw->state_lock to follow similar locking sequence as ip link flow during eswitch mode set. rtnl lock is not good idea for two reasons. (a) Holding rtnl lock for several hundred device commands is not good idea. (b) It leads to below and more similar deadlocks. devlink eswitch_set devlink_mutex rtnl_lock - Lock A esw->state_lock() - Lock B eswitch_disable() reload() ib_register_device() ib_cache_setup_one() rtnl_lock() 2. Exporting devlink lock may lead to undesired use of it in vendor driver(s) in future. 3. Unloading representors outside of the mode_lock requires serialization with other process trying to enable the eswitch. 4. Differing the representors life cycle to a different workqueue requires synchronization with func_change_handler workqueue. Reviewed-by:Roi Dayan <roid@mellanox.com> Reviewed-by:
Bodong Wang <bodong@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Parav Pandit authored
Subsequent patch protects eswitch mode changes across sriov and devlink interfaces. It is desirable for eswitch to provide thread safe eswitch enable and disable APIs. Hence, extend eswitch enable API to optionally update num_vfs when requested. In subsequent patch, eswitch num_vfs are updated after all the eswitch users eswitch drops its reference count. Reviewed-by:
-
Parav Pandit authored
In order to check eswitch state under a lock, prepare code to split capability check and eswitch state check into two helper functions. Reviewed-by:
-
Parav Pandit authored
devlink_nl_cmd_eswitch_set_doit() doesn't hold devlink->lock mutex while invoking driver callback. This is likely due to eswitch mode setting involves adding/remove devlink ports, health reporters or other devlink objects for a devlink device. So it is driver responsiblity to ensure thread safe eswitch state transition happening via either sriov legacy enablement or via devlink eswitch set callback. Therefore, get() callback should also be invoked without holding devlink->lock mutex. Vendor driver can use same internal lock which it uses during eswitch mode set() callback. This makes get() and set() implimentation symmetric in devlink core and in vendor drivers. Hence, remove holding devlink->lock mutex during eswitch get() callback. Failing to do so results into below deadlock scenario when mlx5_core driver is improved to handle eswitch mode set critical section invoked by devlink and sriov sysfs interface in subsequent patch. devlink_nl_cmd_eswitch_set_doit() mlx5_eswitch_mode_set() mutex_lock(esw->mode_lock) <- Lock A [...] register_devlink_port() mutex_lock(&devlink->lock); <- lock B mutex_lock(&devlink->lock); <- lock B devlink_nl_cmd_eswitch_get_doit() mlx5_eswitch_mode_get() mutex_lock(esw->mode_lock) <- Lock A In subsequent patch, mlx5_core driver uses its internal lock during get() and set() eswitch callbacks. Other drivers have been inspected which returns either constant during get operations or reads the value from already allocated structure. Hence it is safe to remove the lock in get( ) callback and let vendor driver handle it. Reviewed-by: -
Parav Pandit authored
mlx5_unload_one() always returns 0. Simplify callers of mlx5_unload_one() and remove the dead code. Reviewed-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Parav Pandit authored
mlx5_register_device() doesn't check for any error and always returns 0. Simplify mlx5_register_device() to return void and its caller, remove dead code related to it. Reviewed-by:
-
Eli Cohen authored
Group version is used when modifying a rule is allowed (FLOW_ACT_NO_APPEND is clear) to detect a case where the rule was found but while the groups where unlocked a new FTE was added. In this case, the added FTE could be one with identical match value so we need to attempt again with group lock held. Change the code so version is retrieved only when FLOW_ACT_NO_APPEND is cleared. As result, later compare can also be avoided if FLOW_ACT_NO_APPEND is cleared. Also improve comments text. Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
-
Eli Cohen authored
FTE version is not used anywhere in the code so avoid incrementing it. Signed-off-by:
-
Eli Cohen authored
When adding a rule to a flow group we need increment the version of the group. Current code fails to do that and as a result, when trying to add a rule, we will fail to discover a case where an FTE with the same match value was added while we scanned the groups of the same match criteria, thus we may try to add an FTE that was already added. Signed-off-by:
-
Eli Cohen authored
Instead of using two different structs for searching groups with the same match, use a single struct and thus simplify the code, make it more readable and smaller size which means less code cache misses. text data bss dec hex before: 35524 2744 0 38268 957c after: 35038 2744 0 37782 9396 When testing add 70000 rules, delete all the rules, and repeat three times taking the average, we get (time in seconds): Before the change: insert 16.80, delete 11.02 After the change: insert 16.55, delete 10.95 Signed-off-by:Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
