There were no artifacts available for virtio job.
So make the artifacts available in the pipeline job.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-8-vignesh.raman@collabora.com

Mediatek 8173 and 8183 SOCs have a separate display controller
and GPU with different drivers for each. For mt8173, the GPU
driver is powervr and the display driver is mediatek. In the
case of mt8183, the GPU driver is panfrost and the display
driver is mediatek. Setting IGT_FORCE_DRIVER to panfrost for
mt8173 is not the expected driver. So set mediatek for mt8173.

Support to test both GPU and display drivers for these ARM SOCs
will be added in the next patch series to increase test coverage.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-7-vignesh.raman@collabora.com

Instead of modifying files in git to enable/disable
configs, use scripts/config on the .config file which
will be used for building the kernel.
Acked-by: Helen Koike <helen.koike@collabora.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-6-vignesh.raman@collabora.com

Enable the following jobs, as the issues noted in the
TODO comments have been resolved. This will ensure that these jobs
are now included and executed as part of the CI/CD pipeline.

msm:apq8016:
TODO: current issue: it is not fiding the NFS root.

mediatek:mt8173:
TODO: current issue: device is hanging.

virtio_gpu:none:
TODO: current issue: malloc(): corrupted top size.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-5-vignesh.raman@collabora.com

Mediatek mt8173 board fails to boot with DA9211 regulator disabled.
Enable CONFIG_REGULATOR_DA9211=y in arm64.config to fix mt8173 boot
issue.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-4-vignesh.raman@collabora.com

Force db410c to host mode to fix network issue which results in failure
to mount root fs via NFS.
See https://gitlab.freedesktop.org/gfx-ci/linux/-/commit/cb72a629

Use apq8016-sbc-usb-host.dtb which allows the USB controllers
to work in host mode.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-3-vignesh.raman@collabora.com

/sys/kernel/debug/dri/*/state exist for every atomic KMS driver.
We do not test non-atomic drivers, so remove the todo.
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207091831.660054-2-vignesh.raman@collabora.com

When conditionally checking for heap existence of a certian address in
pvr_vm_bind_op_map_init the condition whether the map request comes from a
user is incorrect: The context must not be the kernel-context to be a
user(space) context and should be looked up in pvr_heaps.

That makes addresses coming from userspace not being verfied against the
defined ranges and prevents firmware loading for meta cores.

Fixes: ff5f643d ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208170856.1748413-1-knaerzche@gmail.com

Even though we were rolling our own custom state for the vc4 HDMI
controller driver, we were still using the generic helper to destroy
that state.

It was mostly working since the underlying state is the first member of
our state so the pointers are probably equal in all relevant cases, but
it's still fragile so let's fix this properly.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207-kms-hdmi-connector-state-v5-18-6538e19d634d@kernel.org

Adjust the includes to explicitly include the correct headers.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213112401.2000837-1-dario.binacchi@amarulasolutions.com

Adjust the includes to explicitly include the correct headers.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213112432.2002832-1-dario.binacchi@amarulasolutions.com

Correct spellos reported by codespell.
Fix some grammar (as 's' to a few words).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213044107.29214-1-rdunlap@infradead.org

Fix spelling problems as identified by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213043226.10046-1-rdunlap@infradead.org

Correct spelling mistakes that were identified by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213043925.13852-1-rdunlap@infradead.org

As I am familiar with all the details of vop2 display
architecture, I can help review and test all related
changes in this subsystem, so add my email here to make
sure I get CC'd on rockchip drm changes.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211120023.1785687-1-andyshrk@163.com

VOP2 has multiple independent video ports with different
feature, so rename VOP_FEATURE_OUTPUT_10BIT to
VOP2_VP_FEATURE_OUTPUT_10BIT for more clearly meaning.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115931.1785495-1-andyshrk@163.com

VOP2 on rk3588:

Four video ports:
VP0 Max 4096x2160
VP1 Max 4096x2160
VP2 Max 4096x2160
VP3 Max 2048x1080

4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support
4 4K Esmart windows with line RGB/YUV support
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115919.1785435-1-andyshrk@163.com

There are 2 HDMI, 2 DP, 2 eDP on rk3588, so add
corresponding endpoint definition for it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115907.1785377-1-andyshrk@163.com

The vop2 on rk3588 is similar to which on rk356x
but with 4 video ports and need to reference
more grf modules.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115850.1785311-1-andyshrk@163.com

The vop2 need to reference more grf(system grf, vop grf, vo0/1 grf,etc)
in the upcoming rk3588.

So we rename the current system grf to sys_grf.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115826.1785190-1-andyshrk@163.com

We need to setup background delay cycle and prescan
delay cycle when a mode is enable to avoid trigger
POST_BUF_EMPTY irq on rk3588.

Note: RK356x has no such requirement.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115815.1785131-1-andyshrk@163.com

Set overlay mode register according to the
output mode is yuv or rgb.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115805.1785073-1-andyshrk@163.com

The write mask bit is used to make sure when writing
config done bit for one VP will not overwrite the other.

Unfortunately, the write mask bit is missing on
rk3566/8, that means when we write to these bits,
it will not take any effect.

We need this to make the vop work properly after
rk3566/8 variants.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115752.1785013-1-andyshrk@163.com

The enable bit and transform offset of cluster windows should be
cleared when it work at linear mode, or we may have a iommu fault
issue on rk3588 which cluster windows switch between afbc and linear
mode.

As the cluster windows of rk3568 only supports afbc format
so is therefore not affected.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115741.1784954-1-andyshrk@163.com

At first we thought the half_block_en bit in AFBCD_CTRL register
only work in afbc mode. But the fact is that it control the line
buffer in all mode(afbc/tile/linear), so we need configure it in
all case.

As the cluster windows of rk3568 only supports afbc format
so is therefore not affected.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115730.1784893-1-andyshrk@163.com

This reverts commit b63a553e.

regcache_sync will try to reload the configuration in regcache to
hardware, but the registers of 4 Cluster windows and Esmart1/2/3 on
the upcoming rk3588 can not be set successfully before internal PD
power on.

Also it's better to keep the hardware register as it is before we really
enable it.

So let's revert this version, and keep the first version:
commit afa965a4 ("drm/rockchip: vop2: fix suspend/resume")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115719.1784834-1-andyshrk@163.com

The output interface related definition can shared between
vop and vop2, move them to rockchip_drm_drv.h can avoid duplicated
definition.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211115627.1784735-1-andyshrk@163.com

It's the ti_sn65dsi86.pwm auxiliary driver that creates the pwmchip, so
let the auxiliary device be the parent of the pwm device.

Note that getting a reference to the ti-sn65dsi86's pwm using pwm_get()
isn't affected by this change as ti_sn65dsi86_add_aux_device() sets the
auxiliary device's of_node to that of the main device.

Also change PM runtime tracking and diagnostic messages to use that one.
After enabling runtime PM operation for the auxiliary device, all works
as expected as parent devices are handled just fine.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # Acer Aspire 1
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231209153108.1988551-2-u.kleine-koenig@pengutronix.de

G156HAN04.0 is a Color Active Matrix Liquid Crystal Display composed of
a TFT LCD panel, a driver circuit, and LED backlight system. The screen
format is intended to support the 16:9 FHD, 1920(H) x 1080(V) screen
and 16.7M colors (RGB 8-bits) with LED backlight driving circuit.
All input signals are LVDS interface compatible.

G156HAN04.0 is designed for a display unit of notebook style
personal computer and industrial machine.
Signed-off-by: Elmar Albert <ealbert@data-modul.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20231209063714.1381913-2-marex@denx.deSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231209063714.1381913-2-marex@denx.de

Document support for the AUO G156HAN04.0 LVDS display.

G156HAN04.0 is a Color Active Matrix Liquid Crystal Display composed of
a TFT LCD panel, a driver circuit, and LED backlight system. The screen
format is intended to support the 16:9 FHD, 1920(H) x 1080(V) screen
and 16.7M colors (RGB 8-bits) with LED backlight driving circuit.
All input signals are LVDS interface compatible.

G156HAN04.0 is designed for a display unit of notebook style
personal computer and industrial machine.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Elmar Albert <ealbert@data-modul.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20231209063714.1381913-1-marex@denx.deSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231209063714.1381913-1-marex@denx.de

Tianma TM041XDHG01 utilizes the Ilitek ILI9805 controller.

Add this panel's initialzation sequence and timing to ILI9805 driver.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20231207141723.108004-10-dario.binacchi@amarulasolutions.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207141723.108004-10-dario.binacchi@amarulasolutions.com

The GPM1790A0 panel is based on the Ilitek ILI9805 Controller.
Add a driver for it.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231207141723.108004-9-dario.binacchi@amarulasolutions.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207141723.108004-9-dario.binacchi@amarulasolutions.com

Add documentation for "ilitek,ili9805" panel.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231207141723.108004-8-dario.binacchi@amarulasolutions.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207141723.108004-8-dario.binacchi@amarulasolutions.com

The LS068B3SX02 panel is based on the Synaptics R63353 Controller.
Add a driver for it.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231207141723.108004-7-dario.binacchi@amarulasolutions.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207141723.108004-7-dario.binacchi@amarulasolutions.com

The Powkiddy RG-ARC is a series of 2 handheld devices, each with a 4
inch 480x640 display. Add support for the display.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231208154847.130615-4-macroalpha82@gmail.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208154847.130615-4-macroalpha82@gmail.com

The RG-ARC panel is a panel specific to the Anbernic RG-ARC. It is 4
inches in size (diagonally) with a resolution of 480x640.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208154847.130615-3-macroalpha82@gmail.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208154847.130615-3-macroalpha82@gmail.com

The AVCL register, according to the datasheet, comes in increments
of -0.2v between -4.4v (represented by 0x0) to -5.0v (represented
by 0x3). The current calculation is done by adding the defined
AVCL value in mV to -4400 and then dividing by 200 to get the register
value. Unfortunately if I subtract -4400 from -4400 I get -8800, which
divided by 200 gives me -44. If I instead subtract -4400 from -4400
I get 0, which divided by 200 gives me 0. Based on the datasheet this
is the expected register value.

Fixes: 83b7a8e7 ("drm/panel/panel-sitronix-st7701: Parametrize voltage and timing")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231208154847.130615-2-macroalpha82@gmail.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208154847.130615-2-macroalpha82@gmail.com

This is a small 3.5" 640x480 IPS LCD panel.
Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231210-fs035vg158-v5-7-d75adc75571f@jookia.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231210-fs035vg158-v5-7-d75adc75571f@jookia.org

Fascontek manufactures LCD panels such as the FS035VG158.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231210-fs035vg158-v5-6-d75adc75571f@jookia.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231210-fs035vg158-v5-6-d75adc75571f@jookia.org

Remove common properties listed in common yaml files.
Add required properties needed to describe the panel.
Signed-off-by: John Watts <contact@jookia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231210-fs035vg158-v5-5-d75adc75571f@jookia.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231210-fs035vg158-v5-5-d75adc75571f@jookia.org