- 26 Jan, 2022 24 commits
-
-
Paolo Bonzini authored
There is no need for tests other than amx_test to enable dynamic xsave states. Remove the call to vm_xsave_req_perm from generic code, and move it inside the test. While at it, allow customizing the bit that is requested, so that future tests can use it differently. Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
XCR0 is reset to 1 by RESET but not INIT and IA32_XSS is zeroed by both RESET and INIT. The kvm_set_msr_common()'s handling of MSR_IA32_XSS also needs to update kvm_update_cpuid_runtime(). In the above cases, the size in bytes of the XSAVE area containing all states enabled by XCR0 or (XCRO | IA32_XSS) needs to be updated. For simplicity and consistency, existing helpers are used to write values and call kvm_update_cpuid_runtime(), and it's not exactly a fast path. Fixes: a554d207 ("KVM: X86: Processor States following Reset or INIT") Cc: stable@vger.kernel.org Signed-off-by:
Like Xu <likexu@tencent.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20220126172226.2298529-4-seanjc@google.com> Signed-off-by:
-
Like Xu authored
Do a runtime CPUID update for a vCPU if MSR_IA32_XSS is written, as the size in bytes of the XSAVE area is affected by the states enabled in XSS. Fixes: 20300099 ("kvm: vmx: add MSR logic for XSAVES") Cc: stable@vger.kernel.org Signed-off-by:
-
Xiaoyao Li authored
It has been corrected from SDM version 075 that MSR_IA32_XSS is reset to zero on Power up and Reset but keeps unchanged on INIT. Fixes: a554d207 ("KVM: X86: Processor States following Reset or INIT") Cc: stable@vger.kernel.org Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by:
-
Sean Christopherson authored
Free the "struct kvm_cpuid_entry2" array on successful post-KVM_RUN KVM_SET_CPUID{,2} to fix a memory leak, the callers of kvm_set_cpuid() free the array only on failure. BUG: memory leak unreferenced object 0xffff88810963a800 (size 2048): comm "syz-executor025", pid 3610, jiffies 4294944928 (age 8.080s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 0d 00 00 00 ................ 47 65 6e 75 6e 74 65 6c 69 6e 65 49 00 00 00 00 GenuntelineI.... backtrace: [<ffffffff814948ee>] kmalloc_node include/linux/slab.h:604 [inline] [<ffffffff814948ee>] kvmalloc_node+0x3e/0x100 mm/util.c:580 [<ffffffff814950f2>] kvmalloc include/linux/slab.h:732 [inline] [<ffffffff814950f2>] vmemdup_user+0x22/0x100 mm/util.c:199 [<ffffffff8109f5ff>] kvm_vcpu_ioctl_set_cpuid2+0x8f/0xf0 arch/x86/kvm/cpuid.c:423 [<ffffffff810711b9>] kvm_arch_vcpu_ioctl+0xb99/0x1e60 arch/x86/kvm/x86.c:5251 [<ffffffff8103e92d>] kvm_vcpu_ioctl+0x4ad/0x950 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4066 [<ffffffff815afacc>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff815afacc>] __do_sys_ioctl fs/ioctl.c:874 [inline] [<ffffffff815afacc>] __se_sys_ioctl fs/ioctl.c:860 [inline] [<ffffffff815afacc>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 [<ffffffff844a3335>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff844a3335>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c6617c61 ("KVM: x86: Partially allow KVM_SET_CPUID{,2} after KVM_RUN") Cc: stable@vger.kernel.org Reported-by: syzbot+be576ad7655690586eec@syzkaller.appspotmail.com Signed-off-by:Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Sean Christopherson authored
WARN if KVM attempts to allocate a shadow VMCS for vmcs02. KVM emulates VMCS shadowing but doesn't virtualize it, i.e. KVM should never allocate a "real" shadow VMCS for L2. The previous code WARNed but continued anyway with the allocation, presumably in an attempt to avoid NULL pointer dereference. However, alloc_vmcs (and hence alloc_shadow_vmcs) can fail, and indeed the sole caller does: if (enable_shadow_vmcs && !alloc_shadow_vmcs(vcpu)) goto out_shadow_vmcs; which makes it not a useful attempt. Signed-off-by:
-
Sean Christopherson authored
Don't skip the vmcall() in l2_guest_code() prior to re-entering L2, doing so will result in L2 running to completion, popping '0' off the stack for RET, jumping to address '0', and ultimately dying with a triple fault shutdown. It's not at all obvious why the test re-enters L2 and re-executes VMCALL, but presumably it serves a purpose. The VMX path doesn't skip vmcall(), and the test can't possibly have passed on SVM, so just do what VMX does. Fixes: d951b221 ("KVM: selftests: smm_test: Test SMM enter from L2") Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
kvm_cpuid_check_equal() checks for the (full) equality of the supplied CPUID data so .flags need to be checked too. Reported-by:
-
Sean Christopherson authored
Forcibly leave nested virtualization operation if userspace toggles SMM state via KVM_SET_VCPU_EVENTS or KVM_SYNC_X86_EVENTS. If userspace forces the vCPU out of SMM while it's post-VMXON and then injects an SMI, vmx_enter_smm() will overwrite vmx->nested.smm.vmxon and end up with both vmxon=false and smm.vmxon=false, but all other nVMX state allocated. Don't attempt to gracefully handle the transition as (a) most transitions are nonsencial, e.g. forcing SMM while L2 is running, (b) there isn't sufficient information to handle all transitions, e.g. SVM wants access to the SMRAM save state, and (c) KVM_SET_VCPU_EVENTS must precede KVM_SET_NESTED_STATE during state restore as the latter disallows putting the vCPU into L2 if SMM is active, and disallows tagging the vCPU as being post-VMXON in SMM if SMM is not active. Abuse of KVM_SET_VCPU_EVENTS manifests as a WARN and memory leak in nVMX due to failure to free vmcs01's shadow VMCS, but the bug goes far beyond just a memory leak, e.g. toggling SMM on while L2 is active puts the vCPU in an architecturally impossible state. WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Modules linked in: CPU: 1 PID: 3606 Comm: syz-executor725 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline] RIP: 0010:free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656 Code: <0f> 0b eb b3 e8 8f 4d 9f 00 e9 f7 fe ff ff 48 89 df e8 92 4d 9f 00 Call Trace: <TASK> kvm_arch_vcpu_destroy+0x72/0x2f0 arch/x86/kvm/x86.c:11123 kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline] kvm_destroy_vcpus+0x11f/0x290 arch/x86/kvm/../../../virt/kvm/kvm_main.c:460 kvm_free_vcpus arch/x86/kvm/x86.c:11564 [inline] kvm_arch_destroy_vm+0x2e8/0x470 arch/x86/kvm/x86.c:11676 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1217 [inline] kvm_put_kvm+0x4fa/0xb00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1250 kvm_vm_release+0x3f/0x50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1273 __fput+0x286/0x9f0 fs/file_table.c:311 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0xb29/0x2a30 kernel/exit.c:806 do_group_exit+0xd2/0x2f0 kernel/exit.c:935 get_signal+0x4b0/0x28c0 kernel/signal.c:2862 arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Cc: stable@vger.kernel.org Reported-by: syzbot+8112db3ab20e70d50c31@syzkaller.appspotmail.com Signed-off-by:
-
Vitaly Kuznetsov authored
Commit 3fa5e8fd ("KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized") re-arranged svm_vcpu_init_msrpm() call in svm_create_vcpu(), thus making the comment about vmcb being NULL obsolete. Drop it. While on it, drop superfluous vmcb_is_clean() check: vmcb_mark_dirty() is a bit flip, an extra check is unlikely to bring any performance gain. Drop now-unneeded vmcb_is_clean() helper as well. Fixes: 3fa5e8fd ("KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized") Signed-off-by:
-
Vitaly Kuznetsov authored
Commit c4327f15 ("KVM: SVM: hyper-v: Enlightened MSR-Bitmap support") introduced enlightened MSR-Bitmap support for KVM-on-Hyper-V but it didn't actually enable the support. Similar to enlightened NPT TLB flush and direct TLB flush features, the guest (KVM) has to tell L0 (Hyper-V) that it's using the feature by setting the appropriate feature fit in VMCB control area (sw reserved fields). Fixes: c4327f15 ("KVM: SVM: hyper-v: Enlightened MSR-Bitmap support") Signed-off-by:
-
Sean Christopherson authored
Inject a #GP instead of synthesizing triple fault to try to avoid killing the guest if emulation of an SEV guest fails due to encountering the SMAP erratum. The injected #GP may still be fatal to the guest, e.g. if the userspace process is providing critical functionality, but KVM should make every attempt to keep the guest alive. Signed-off-by:
Liam Merwick <liam.merwick@oracle.com> Message-Id: <20220120010719.711476-10-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Resume the guest instead of synthesizing a triple fault shutdown if the instruction bytes buffer is empty due to the #NPF being on the code fetch itself or on a page table access. The SMAP errata applies if and only if the code fetch was successful and ucode's subsequent data read from the code page encountered a SMAP violation. In practice, the guest is likely hosed either way, but crashing the guest on a code fetch to emulated MMIO is technically wrong according to the behavior described in the APM. Signed-off-by:
-
Sean Christopherson authored
Inject #UD if KVM attempts emulation for an SEV guests without an insn buffer and instruction decoding is required. The previous behavior of allowing emulation if there is no insn buffer is undesirable as doing so means KVM is reading guest private memory and thus decoding cyphertext, i.e. is emulating garbage. The check was previously necessary as the emulation type was not provided, i.e. SVM needed to allow emulation to handle completion of emulation after exiting to userspace to handle I/O. Signed-off-by:
-
Sean Christopherson authored
WARN if KVM attempts to emulate in response to #UD or #GP for SEV guests, i.e. if KVM intercepts #UD or #GP, as emulation on any fault except #NPF is impossible since KVM cannot read guest private memory to get the code stream, and the CPU's DecodeAssists feature only provides the instruction bytes on #NPF. Signed-off-by:
-
Sean Christopherson authored
Pass the emulation type to kvm_x86_ops.can_emulate_insutrction() so that a future commit can harden KVM's SEV support to WARN on emulation scenarios that should never happen. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add a sanity check on DECODEASSIST being support if SEV is supported, as KVM cannot read guest private memory and thus relies on the CPU to provide the instruction byte stream on #NPF for emulation. The intent of the check is to document the dependency, it should never fail in practice as producing hardware that supports SEV but not DECODEASSISTS would be non-sensical. Signed-off-by:
-
Sean Christopherson authored
Never intercept #GP for SEV guests as reading SEV guest private memory will return cyphertext, i.e. emulating on #GP can't work as intended. Cc: stable@vger.kernel.org Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
-
Sean Christopherson authored
Revert a completely broken check on an "invalid" RIP in SVM's workaround for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously expects a gfn, i.e. operates in the guest physical address space, whereas RIP is a virtual (not even linear) address. The "fix" worked for the problematic KVM selftest because the test identity mapped RIP. Fully revert the hack instead of trying to translate RIP to a GPA, as the non-SEV case is now handled earlier, and KVM cannot access guest page tables to translate RIP. This reverts commit e72436bc. Fixes: e72436bc ("KVM: SVM: avoid infinite loop on NPF from bad address") Reported-by:
-
Sean Christopherson authored
Always signal that emulation is possible for !SEV guests regardless of whether or not the CPU provided a valid instruction byte stream. KVM can read all guest state (memory and registers) for !SEV guests, i.e. can fetch the code stream from memory even if the CPU failed to do so because of the SMAP errata. Fixes: 05d5a486 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)") Cc: stable@vger.kernel.org Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
-
Denis Valeev authored
The bug occurs on #GP triggered by VMware backdoor when eax value is unaligned. eax alignment check should not be applied to non-SVM instructions because it leads to incorrect omission of the instructions emulation. Apply the alignment check only to SVM instructions to fix. Fixes: d1cba6c9 ("KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround") Signed-off-by:
Denis Valeev <lemniscattaden@gmail.com> Message-Id: <Yexlhaoe1Fscm59u@q> Cc: stable@vger.kernel.org Signed-off-by:
-
Like Xu authored
With the help of xstate_get_guest_group_perm(), KVM can exclude unpermitted xfeatures in cpuid.0xd.0.eax, in which case the corresponding xfeatures sizes should also be matched to the permitted xfeatures. To fix this inconsistency, the permitted_xcr0 and permitted_xss are defined consistently, which implies 'supported' plus certain permissions for this task, and it also fixes cpuid.0xd.1.ebx and later leaf-by-leaf queries. Fixes: 445ecdf7 ("kvm: x86: Exclude unpermitted xfeatures at KVM_GET_SUPPORTED_CPUID") Signed-off-by:
-
Wanpeng Li authored
The below warning is splatting during guest reboot. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1931 at arch/x86/kvm/x86.c:10322 kvm_arch_vcpu_ioctl_run+0x874/0x880 [kvm] CPU: 0 PID: 1931 Comm: qemu-system-x86 Tainted: G I 5.17.0-rc1+ #5 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x874/0x880 [kvm] Call Trace: <TASK> kvm_vcpu_ioctl+0x279/0x710 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fd39797350b This can be triggered by not exposing tsc-deadline mode and doing a reboot in the guest. The lapic_shutdown() function which is called in sys_reboot path will not disarm the flying timer, it just masks LVTT. lapic_shutdown() clears APIC state w/ LVT_MASKED and timer-mode bit is 0, this can trigger timer-mode switch between tsc-deadline and oneshot/periodic, which can result in preemption timer be cancelled in apic_update_lvtt(). However, We can't depend on this when not exposing tsc-deadline mode and oneshot/periodic modes emulated by preemption timer. Qemu will synchronise states around reset, let's cancel preemption timer under KVM_SET_LAPIC. Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1643102220-35667-1-git-send-email-wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Jim Mattson authored
The maximum size of a VMCS (or VMXON region) is 4096. By definition, these are order 0 allocations. Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20220125004359.147600-1-jmattson@google.com> Signed-off-by:
-
- 25 Jan, 2022 4 commits
-
-
Quanfa Fu authored
Make kvm_vcpu_reload_apic_access_page() static as it is no longer invoked directly by vmx and it is also no longer exported. No functional change intended. Signed-off-by:
Quanfa Fu <quanfafu@gmail.com> Message-Id: <20211219091446.174584-1-quanfafu@gmail.com> Signed-off-by:
-
David Matlack authored
This selftest was accidentally removed by commit 6a581508 ("selftest: KVM: Add intra host migration tests"). Add it back. Fixes: 6a581508 ("selftest: KVM: Add intra host migration tests") Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220120003826.2805036-1-dmatlack@google.com> Signed-off-by:
-
Sean Christopherson authored
Set vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS, a.k.a. the pending single-step breakpoint flag, when re-injecting a #DB with RFLAGS.TF=1, and STI or MOVSS blocking is active. Setting the flag is necessary to make VM-Entry consistency checks happy, as VMX has an invariant that if RFLAGS.TF is set and STI/MOVSS blocking is true, then the previous instruction must have been STI or MOV/POP, and therefore a single-step #DB must be pending since the RFLAGS.TF cannot have been set by the previous instruction, i.e. the one instruction delay after setting RFLAGS.TF must have already expired. Normally, the CPU sets vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS appropriately when recording guest state as part of a VM-Exit, but #DB VM-Exits intentionally do not treat the #DB as "guest state" as interception of the #DB effectively makes the #DB host-owned, thus KVM needs to manually set PENDING_DBG.BS when forwarding/re-injecting the #DB to the guest. Note, although this bug can be triggered by guest userspace, doing so requires IOPL=3, and guest userspace running with IOPL=3 has full access to all I/O ports (from the guest's perspective) and can crash/reboot the guest any number of ways. IOPL=3 is required because STI blocking kicks in if and only if RFLAGS.IF is toggled 0=>1, and if CPL>IOPL, STI either takes a #GP or modifies RFLAGS.VIF, not RFLAGS.IF. MOVSS blocking can be initiated by userspace, but can be coincident with a #DB if and only if DR7.GD=1 (General Detect enabled) and a MOV DR is executed in the MOVSS shadow. MOV DR #GPs at CPL>0, thus MOVSS blocking is problematic only for CPL0 (and only if the guest is crazy enough to access a DR in a MOVSS shadow). All other sources of #DBs are either suppressed by MOVSS blocking (single-step, code fetch, data, and I/O), are mutually exclusive with MOVSS blocking (T-bit task switch), or are already handled by KVM (ICEBP, a.k.a. INT1). This bug was originally found by running tests[1] created for XSA-308[2]. Note that Xen's userspace test emits ICEBP in the MOVSS shadow, which is presumably why the Xen bug was deemed to be an exploitable DOS from guest userspace. KVM already handles ICEBP by skipping the ICEBP instruction and thus clears MOVSS blocking as a side effect of its "emulation". [1] http://xenbits.xenproject.org/docs/xtf/xsa-308_2main_8c_source.html [2] https://xenbits.xen.org/xsa/advisory-308.htmlReported-by:
David Woodhouse <dwmw2@infradead.org> Reported-by:
Alexander Graf <graf@amazon.de> Signed-off-by:
-
Vitaly Kuznetsov authored
Full equality check of CPUID data on update (kvm_cpuid_check_equal()) may fail for SGX enabled CPUs as CPUID.(EAX=0x12,ECX=1) is currently being mangled in kvm_vcpu_after_set_cpuid(). Move it to __kvm_update_cpuid_runtime() and split off cpuid_get_supported_xcr0() helper as 'vcpu->arch.guest_supported_xcr0' update needs (logically) to stay in kvm_vcpu_after_set_cpuid(). Cc: stable@vger.kernel.org Fixes: feb627e8 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by:
-
- 24 Jan, 2022 3 commits
-
-
Xianting Tian authored
The async parameter of hva_to_pfn_remapped() is not used, so remove it. Signed-off-by:
Xianting Tian <xianting.tian@linux.alibaba.com> Message-Id: <20220124020456.156386-1-xianting.tian@linux.alibaba.com> Signed-off-by:
-
Peter Zijlstra authored
Commit 14243b38 ("KVM: x86/xen: Add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery") adds superfluous .fixup usage after the whole .fixup section was removed in commit e5eefda5 ("x86: Remove .fixup section"). Fixes: 14243b38 ("KVM: x86/xen: Add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery") Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Message-Id: <20220123124219.GH20638@worktop.programming.kicks-ass.net> Signed-off-by:
-
Sean Christopherson authored
Zero vmcs.HOST_IA32_SYSENTER_ESP when initializing *constant* host state if and only if SYSENTER cannot be used, i.e. the kernel is a 64-bit kernel and is not emulating 32-bit syscalls. As the name suggests, vmx_set_constant_host_state() is intended for state that is *constant*. When SYSENTER is used, SYSENTER_ESP isn't constant because stacks are per-CPU, and the VMCS must be updated whenever the vCPU is migrated to a new CPU. The logic in vmx_vcpu_load_vmcs() doesn't differentiate between "never loaded" and "loaded on a different CPU", i.e. setting SYSENTER_ESP on VMCS load also handles setting correct host state when the VMCS is first loaded. Because a VMCS must be loaded before it is initialized during vCPU RESET, zeroing the field in vmx_set_constant_host_state() obliterates the value that was written when the VMCS was loaded. If the vCPU is run before it is migrated, the subsequent VM-Exit will zero out MSR_IA32_SYSENTER_ESP, leading to a #DF on the next 32-bit syscall. double fault: 0000 [#1] SMP CPU: 0 PID: 990 Comm: stable Not tainted 5.16.0+ #97 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 EIP: entry_SYSENTER_32+0x0/0xe7 Code: <9c> 50 eb 17 0f 20 d8 a9 00 10 00 00 74 0d 25 ff ef ff ff 0f 22 d8 EAX: 000000a2 EBX: a8d1300c ECX: a8d13014 EDX: 00000000 ESI: a8f87000 EDI: a8d13014 EBP: a8d12fc0 ESP: 00000000 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00210093 CR0: 80050033 CR2: fffffffc CR3: 02c3b000 CR4: 00152e90 Fixes: 6ab8a405 ("KVM: VMX: Avoid to rdmsrl(MSR_IA32_SYSENTER_ESP)") Cc: Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by:
-
- 20 Jan, 2022 3 commits
-
-
Wei Wang authored
Use the api number 134 for KVM_GET_XSAVE2, instead of 42, which has been used by KVM_GET_XSAVE. Also, fix the WARNINGs of the underlines being too short. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Wei Wang <wei.w.wang@intel.com> Tested-by:
-
Jinrong Liang authored
The following warning appears when executing make -C tools/testing/selftests/kvm include/x86_64/processor.h:290:2: warning: 'ecx' may be used uninitialized in this function [-Wmaybe-uninitialized] asm volatile("cpuid" ^~~ lib/x86_64/processor.c:1523:21: note: 'ecx' was declared here uint32_t eax, ebx, ecx, edx, max_ext_leaf; Just initialize ecx to remove this warning. Fixes: c8cc43c1 ("selftests: KVM: avoid failures due to reserved HyperTransport region") Signed-off-by:Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220119140325.59369-1-cloudliang@tencent.com> Signed-off-by:
-
Jinrong Liang authored
The following warning appears when executing make -C tools/testing/selftests/kvm x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_intel_br_retired': x86_64/pmu_event_filter_test.c:241:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable] 241 | struct kvm_cpuid2 *cpuid; | ^~~~~ x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_amd_zen_br_retired': x86_64/pmu_event_filter_test.c:258:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable] 258 | struct kvm_cpuid2 *cpuid; | ^~~~~ Just delete the unused variables to stay away from warnings. Fixes: dc7e75b3b3ee ("selftests: kvm/x86: Add test for KVM_SET_PMU_EVENT_FILTER") Signed-off-by:
-
- 19 Jan, 2022 6 commits
-
-
Paolo Bonzini authored
Some indentation with spaces crept in, likely due to terminal-based cut and paste. Clean it up. Signed-off-by: -
Paolo Bonzini authored
KVM_CAP_XSAVE2 is out of sync due to a conflict. Copy the whole file while at it. Reported-by:
Yang Zhong <yang.zhong@intel.com> Signed-off-by:
-
Muhammad Usama Anjum authored
amx_test's binary should be present in the .gitignore file for the git to ignore it. Fixes: bf70636d ("selftest: kvm: Add amx selftest") Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Message-Id: <20220118122053.1941915-1-usama.anjum@collabora.com> Signed-off-by:
-
Sean Christopherson authored
Nullify svm_x86_ops.vcpu_(un)blocking if AVIC/APICv is disabled as the hooks are necessary only to clear the vCPU's IsRunning entry in the Physical APIC and to update IRTE entries if the VM has a pass-through device attached. Opportunistically rename the helpers to clarify their AVIC relationship. Signed-off-by:
-
Sean Christopherson authored
Move svm_hardware_setup() below svm_x86_ops so that KVM can modify ops during setup, e.g. the vcpu_(un)blocking hooks can be nullified if AVIC is disabled or unsupported. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop avic_set_running() in favor of calling avic_vcpu_{load,put}() directly, and modify the block+put path to use preempt_disable/enable() instead of get/put_cpu(), as it doesn't actually care about the current pCPU associated with the vCPU. Opportunistically add lockdep assertions as being preempted in avic_vcpu_put() would lead to consuming stale data, even though doing so _in the current code base_ would not be fatal. Add a much needed comment explaining why svm_vcpu_blocking() needs to unload the AVIC and update the IRTE _before_ the vCPU starts blocking. Signed-off-by:
-
