- 12 Jul, 2006 40 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] sky2: optimize receive restart [PATCH] sky2: PHY power on delays [PATCH] sky2: NAPI suspend/resume of dual port cards [PATCH] sky2: sky2_reset section mismatch [PATCH] sk98lin: fix truncated collision threshold mask [PATCH] skge: fix truncated collision threshold mask [PATCH] sky2: fix truncated collision threshold mask [PATCH] myri10ge return value fix [PATCH] Update smc91x driver with ARM Versatile board info [PATCH] ixgb: fix tx unit hang - properly calculate desciptor count [PATCH] smsc-ircc2: fix section reference mismatches [PATCH] 8139cp.c printk fix [PATCH] s2io driver irq fix [PATCH] e1000: irq naming update [PATCH] forcedeth: watermark fixup [PATCH] forcedeth: deferral fixup [PATCH] zd1211rw: usb_clear_halt not allowed in IRQ context [PATCH] bcm43xx-softmac: Fix an off-by-one condition in handle_irq_noise
-
Stephen Hemminger authored
When the driver handles multiple packets per NAPI poll, it is better to reload the receive ring, then tell the hardware. Otherwise, under packet storm with flow control, the driver/hardware will degrade down to one packet getting through per pause-exchange. Likewise on transmit, don't wakeup until a little more than minimum ring space is available. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
The documentation says we need to wait after turning on the PHY. Also, don't enable WOL by default. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
The changes to handle suspend/resume didn't handle the case where a dual port card has the first port down, but the second is running. In this driver, all NAPI polling is done on the primary port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Since sky2_reset gets call from sky2_resume it shouldn't be tagged with devinit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Patch to correct broken collision threshold mask in (same problem as sky2 driver). Should be three bits wide, but the mask only allows for 1 bit to be set. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Patch to correct broken collision threshold mask in sky2 driver. Should be three bits wide, but the mask only allows for 1 bit to be set. Thanks & Regards Neil Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> sky2.h | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Brice Goglin authored
Andrew Morton wrote: > All these functions return error codes, and we're not checking them. We > should. So there's a patch which marks all these things as __must_check, > which causes around 1,500 new warnings. > The following patch fixes such a warning in myri10ge. Check pci_enable_device() return value in myri10ge_resume(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Deepak Saxena authored
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Auke Kok authored
There were some tso bugs that only showed up with heavy load and 16kB pages that this patch fixes by making the driver's internal use count of descriptors match the count that it was estimating it needed using the DESC_NEEDED macro. This bug caused NETDEV_WATCHDOG resets aka tx timeouts. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Dmitry Torokhov authored
subsystem_configurations array is only used by an __init function, therefore it should be marked __initdata, not __devinitdata. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Andrew Morton authored
drivers/net/8139cp.c: In function 'cp_init_one': drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t' drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Ananda Raju authored
Modification and bug fixes with respect to irq registration. - Enable interrupts after request_irq - Restored MSI data register value at driver unload time Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Andrew Morton authored
Use the new names. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
Ayaz Abdulla authored
This patch defines the watermark registers and fixes up the use of this register. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Ayaz Abdulla authored
This patch adds the definition for the deferral registers and fixes up the use of these registers. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Linus Torvalds authored
* HEAD: [ALSA] Fix undefined (missing) references in ISA MIRO sound driver [ALSA] make sound/isa/gus/gusextreme.c:devices static [ALSA] hda-codec - Fix missing array terminators in AD1988 codec support [ALSA] Fix a deadlock in snd-rtctimer [ALSA] Fix section mismatch errors in ALSA PCI drivers [ALSA] remove unused snd_minor.name field [ALSA] Fix no mpu401 interface can cause hard freeze [ALSA] wavefront: fix __init/__devinit confusion [ALSA] Fix workaround for AD1988A rev2 codec [ALSA] trivial: Code clean up of i2c/cs8427.c [ALSA] sound/i2c/cs8427.c: don't export a static function [ALSA] intel8x0 - Add ac97 quirk for Tyan Thunder K8WE board [ALSA] Reduce the string length of Terratec Aureon 7.1 Universe [ALSA] sound/pci/Kconfig - fix broken indenting for SND_FM801_TEA575X [ALSA] fix the SND_FM801_TEA575X dependencies [ALSA] Memory leak in sound/pcmcia/pdaudiocf/pdaudiocf.c
-
Alan Cox authored
Prior to 2.6.18rc1 you could install with devices on a JMicron chipset using the "all-generic-ide" option. As of this kernel the AHCI driver grabs the controller and rams it into AHCI mode losing the PATA ports and making CD drives and the like vanish. The all-generic-ide option fails because the AHCI driver grabbed the PCI device and reconfigured it. To fix this three things are needed. #1 We must put the chip into dual function mode #2 The AHCI driver must grab only function 0 (already in your rc1 tree) #3 Something must grab the PATA ports The attached patch is the minimal risk edition of this. It puts the chip into dual function mode so that AHCI will grab the SATA ports without losing the PATA ports. To keep the risk as low as possible the third patch adds the PCI identifiers for the PATA port and the FN check to the ide-generic driver. There is a more featured jmicron driver on its way but that adds risk and the ide-generic support is sufficient to install and run a system. The actual chip setup done by the quirk is the precise setup recommended by the vendor. (The JMB368 appears only in the ide-generic entry as it has no AHCI so does not need the quirk) Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chase Venters authored
During the recent discussion of taking 'volatile' off of the spinlock, I noticed that while most arches #define cpu_relax() such that it implies barrier(), some arches define cpu_relax() to be empty. This patch changes the definition of cpu_relax() for frv, h8300, m68knommu, sh, sh64, v850 and xtensa from an empty while(0) to the compiler barrier(). Signed-off-by: Chase Venters <chase.venters@clientec.com> Acked-by: Arjan van de Ven <arjan@Linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
Joseph Fannin reported that hpet_rtc_interrupt() enables hardirqs in irq context: [ 25.628000] [<c014af4e>] trace_hardirqs_on+0xce/0x200 [ 25.628000] [<c036cf21>] _spin_unlock_irq+0x31/0x70 [ 25.628000] [<c0296584>] rtc_get_rtc_time+0x44/0x1a0 [ 25.628000] [<c01198bb>] hpet_rtc_interrupt+0x21b/0x280 [ 25.628000] [<c0161141>] handle_IRQ_event+0x31/0x70 [ 25.628000] [<c0162d37>] handle_edge_irq+0xe7/0x210 [ 25.628000] [<c0106192>] do_IRQ+0x92/0x120 [ 25.628000] [<c0104121>] common_interrupt+0x25/0x2c the call of rtc_get_rtc_time() is highly suspect. At a minimum we need the patch below to save/restore hardirq state. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Joseph Fannin <jfannin@gmail.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
We're supposed to go the next power of two if nfds==nr. Of `nr', not of `nfsd'. Spotted by Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric W. Biederman authored
It looks like someone confused kmem_cache_create with a different allocator and was attempting to give it knowledge of how many cache entries there were. With the unfortunate result that each slab entry was big enough to hold every irq. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adam B. Jerome authored
Address a potential 'larger than buffer size' memory access by clear_user(). Without this patch, this call to clear_user() can attempt to clear too many (tsz) bytes resulting in a wrong (-EFAULT) return code by read_kcore(). Signed-off-by: Adam B. Jerome <abj@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Arjan van de Ven authored
sysfs has a different i_mutex lock order behavior for i_mutex than the other filesystems; sysfs i_mutex is called in many places with subsystem locks held. At the same time, many of the VFS locking rules do not apply to sysfs at all (cross directory rename for example). To untangle this mess (which gives false positives in lockdep), we're giving sysfs inodes their own class for i_mutex. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kirill Korotaev authored
When found, it is obvious. nfds calculated when allocating fdsets is rewritten by calculation of size of fdtable, and when we are unlucky, we try to free fdsets of wrong size. Found due to OpenVZ resource management (User Beancounters). Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: Kirill Korotaev <dev@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Marcel Holtmann authored
Based on a patch from Ernie Petrides During security research, Red Hat discovered a behavioral flaw in core dump handling. A local user could create a program that would cause a core file to be dumped into a directory they would not normally have permissions to write to. This could lead to a denial of service (disk consumption), or allow the local user to gain root privileges. The prctl() system call should never allow to set "dumpable" to the value 2. Especially not for non-privileged users. This can be split into three cases: 1) running as root -- then core dumps will already be done as root, and so prctl(PR_SET_DUMPABLE, 2) is not useful 2) running as non-root w/setuid-to-root -- this is the debatable case 3) running as non-root w/setuid-to-non-root -- then you definitely do NOT want "dumpable" to get set to 2 because you have the privilege escalation vulnerability With case #2, the only potential usefulness is for a program that has designed to run with higher privilege (than the user invoking it) that wants to be able to create root-owned root-validated core dumps. This might be useful as a debugging aid, but would only be safe if the program had done a chdir() to a safe directory. There is no benefit to a production setuid-to-root utility, because it shouldn't be dumping core in the first place. If this is true, then the same debugging aid could also be accomplished with the "suid_dumpable" sysctl. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
WARNING: /lib/modules/2.6.18-rc1-mm1/kernel/sound/isa/opti9xx/snd-miro.ko needs unknown symbol snd_cs4231_create WARNING: /lib/modules/2.6.18-rc1-mm1/kernel/sound/isa/opti9xx/snd-miro.ko needs unknown symbol snd_cs4231_pcm WARNING: /lib/modules/2.6.18-rc1-mm1/kernel/sound/isa/opti9xx/snd-miro.ko needs unknown symbol snd_cs4231_timer WARNING: /lib/modules/2.6.18-rc1-mm1/kernel/sound/isa/opti9xx/snd-miro.ko needs unknown symbol snd_cs4231_mixer WARNING: /lib/modules/2.6.18-rc1-mm1/kernel/fs/reiser4/reiser4.ko needs unknown symbol generic_file_read Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Adrian Bunk authored
'devices' is not a good name for a global variable. Thankfully, it can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Fixed the missing array terminators in AD1988 codec support code. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Fix a occasional deadlock occuring with snd-rtctimer driver, added irqsave to the lock in tasklet (ALSA bug#952). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Fixed 'section mismatch' errors in ALSA PCI drivers: - removed invalid __devinitdata from pci id tables - fix/remove __devinit of functions called in suspend/resume Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Drop the snd_minor structure's name field that was just a helper for devfs device deregistration. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Randy Dunlap authored
This patch fixes the remaining instances in our tree where a non- existent mpu401 interface can cause a hard freeze when i/o is issued. This commit closes Malone #34831. Bug: https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/34831 patch location: http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=b422309cdd980cfefe99379796c04e961d3c1544 From: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
The wavefront driver used __init in some places referenced by __devinit functions. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Fix the workaround for AD1988A rev2 codec not to apply to AD1988B codec chips. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
- Fix spaces, wrap lines in 80 columns. - Move EXPORT_SYMBOL() adjacent to each function. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Adrian Bunk authored
Static functions shouldn't be exported. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added the default ac97 quirk (hp_only) for Tyan Thunder K8WE board. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-