- 13 Nov, 2019 4 commits
-
-
Takao Orito authored
SD Host controller on Milbeaut consists of two controller parts. One is core controller F_SDH30, this is similar to sdhci-fujitsu controller. Another is bridge controller. This bridge controller is not compatible with sdhci-fujitsu controller. This is special for Milbeaut series. This has some functions. For example, reset control, clock enable/select for SDR50/25/12, set property of SD physical pins, retuning control, set capabilityies. This bridge controller requires special procedures at reset or clock enablement or change for further tuning of clock. Signed-off-by: Takao Orito <orito.takao@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Takao Orito authored
Add the device-tree binding documentation for Milbeaut SDHCI driver. Signed-off-by: Takao Orito <orito.takao@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Raul E Rangel authored
AMD SDHC 0x7906 requires a hard reset to clear all internal state. Otherwise it can get into a bad state where the DATA lines are always read as zeros. This change requires firmware that can transition the device into D3Cold for it to work correctly. If the firmware does not support transitioning to D3Cold then the power state transitions are a no-op. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Raul E Rangel authored
In sdhci_do_reset we call the reset callback which is typically sdhci_reset. sdhci_reset can wait for up to 100ms waiting for the controller to reset. If SDHCI_RESET_ALL was passed as the flag, the controller will clear the IRQ mask. If during that 100ms the card is removed there is no notification to the MMC system that the card was removed. So from the drivers point of view the card is always present. By making sdhci_reinit compare the present state it can schedule a rescan if the card was removed while a reset was in progress. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-
- 11 Nov, 2019 1 commit
-
-
Linus Torvalds authored
-
- 10 Nov, 2019 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have trickled in over the last couple of weeks: - MAINTAINER update for Cavium/Marvell ThunderX2 - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for CAN interfaces - i.MX fixes for voltage regulator GPIO mappings, fixes voltage scaling issues - More i.MX fixes for various issues on i.MX eval boards: interrupt storm due to u-boot leaving pins in new states, fixing power button config, a couple of compatible-string corrections. - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets - A few documentation tweaks and a fix of a memory leak in the reset subsystem" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: update Cavium ThunderX2 maintainers ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 arm64: dts: zii-ultra: fix ARM regulator GPIO handle ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend arm64: dts: imx8mn: fix compatible string for sdma arm64: dts: imx8mm: fix compatible string for sdma reset: fix reset_control_ops kerneldoc comment ARM: dts: imx6-logicpd: Re-enable SNVS power key soc: imx: gpc: fix initialiser format ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts arm64: dts: ls1028a: fix a compatible issue reset: fix reset_control_get_exclusive kerneldoc comment reset: fix reset_control_lookup kerneldoc comment reset: fix of_reset_control_get_count kerneldoc comment reset: fix of_reset_simple_xlate kerneldoc comment reset: Fix memory leak in reset_control_array_put()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull IIO fixes and staging driver from Greg KH: "Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole new staging driver. The IIO fixes resolve some reported issues, all are tiny. The staging driver addition is the vboxsf filesystem, which is the VirtualBox guest shared folder code. Hans has been trying to get filesystem reviewers to review the code for many months now, and Christoph finally said to just merge it in staging now as it is stand-alone and the filesystem people can review it easier over time that way. I know it's late for this big of an addition, but it is stand-alone. The code has been in linux-next for a while, long enough to pick up a few tiny fixes for it already so people are looking at it. All of these have been in linux-next with no reported issues" * tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: Fix error return code in vboxsf_fill_super() staging: vboxsf: fix dereference of pointer dentry before it is null checked staging: vboxsf: Remove unused including <linux/version.h> staging: Add VirtualBox guest shared folder (vboxsf) support iio: adc: stm32-adc: fix stopping dma iio: imu: inv_mpu6050: fix no data on MPU6050 iio: srf04: fix wrong limitation in distance measuring iio: imu: adis16480: make sure provided frequency is positive
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a number of late-arrival driver fixes for issues reported for some char/misc drivers for 5.4-rc7 These all come from the different subsystem/driver maintainers as things that they had reports for and wanted to see fixed. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: intel_th: pci: Add Jasper Lake PCH support intel_th: pci: Add Comet Lake PCH support intel_th: msu: Fix possible memory leak in mode_store() intel_th: msu: Fix overflow in shift of an unsigned int intel_th: msu: Fix missing allocation failure check on a kstrndup intel_th: msu: Fix an uninitialized mutex intel_th: gth: Fix the window switching sequence soundwire: slave: fix scanf format soundwire: intel: fix intel_register_dai PDI offsets and numbers interconnect: Add locking in icc_set_tag() interconnect: qcom: Fix icc_onecell_data allocation soundwire: depend on ACPI || OF soundwire: depend on ACPI thunderbolt: Drop unnecessary read when writing LC command in Ice Lake thunderbolt: Fix lockdep circular locking depedency warning thunderbolt: Read DP IN adapter first two dwords in one go
-
git://git.infradead.org/users/hch/configfsLinus Torvalds authored
Pull configfs regression fix from Christoph Hellwig: "Fix a regression from this merge window in the configfs symlink handling (Honggang Li)" * tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs: configfs: calculate the depth of parent item
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Make the tsc=reliable/nowatchdog command line parameter work again. It was broken with the introduction of the early TSC clocksource. - Prevent the evaluation of exception stacks before they are set up. This causes a crash in dumpstack because the stack walk termination gets screwed up. - Prevent a NULL pointer dereference in the rescource control file system. - Avoid bogus warnings about APIC id mismatch related to the LDR which can happen when the LDR is not in use and therefore not initialized. Only evaluate that when the APIC is in logical destination mode" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early x86/dumpstack/64: Don't evaluate exception stacks before setup x86/apic/32: Avoid bogus LDR warnings x86/resctrl: Prevent NULL pointer dereference when reading mondata
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A small set of fixes for timekeepoing and clocksource drivers: - VDSO data was updated conditional on the availability of a VDSO capable clocksource. This causes the VDSO functions which do not depend on a VDSO capable clocksource to operate on stale data. Always update unconditionally. - Prevent a double free in the mediatek driver - Use the proper helper in the sh_mtu2 driver so it won't attempt to initialize non-existing interrupts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping/vsyscall: Update VDSO data unconditionally clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name() clocksource/drivers/mediatek: Fix error handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two fixes for scheduler regressions: - Plug a subtle race condition which was introduced with the rework of the next task selection functionality. The change of task properties became unprotected which can be observed inconsistently causing state corruption. - A trivial compile fix for CONFIG_CGROUPS=n" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix pick_next_task() vs 'change' pattern race sched/core: Fix compilation error when cgroup not selected
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Thomas Gleixner: - Fix the time sorting algorithm which was broken due to truncation of big numbers - Fix the python script generator fail caused by a broken tracepoint array iterator * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix time sorting perf tools: Remove unused trace_find_next_event() perf scripting engines: Iterate on tep event arrays directly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixlet from Thomas Gleixner: "A trivial fix for a kernel doc regression where an argument change was not reflected in the documentation" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull stacktrace fix from Thomas Gleixner: "A small fix for a stacktrace regression. Saving a stacktrace for a foreign task skipped an extra entry which makes e.g. the output of /proc/$PID/stack incomplete" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stacktrace: Don't skip first entry on noncurrent tasks
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fix from Steve French: "Small fix for an smb3 reconnect bug (also marked for stable)" * tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix persistent handles reconnect
-
Corentin Labbe authored
config option GENERIC_IO was removed but still selected by lib/kconfig This patch finish the cleaning. Fixes: 9de8da47 ("kconfig: kill off GENERIC_IO option") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Fix glitch risks in the Intel GPIO - Fix the Intel Cherryview valid irq mask calculation. - Allocate the Intel Cherryview irqchip dynamically. - Fix the valid mask init sequency on the ST STMFX driver. * tag 'pinctrl-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: stmfx: fix valid_mask init sequence pinctrl: cherryview: Allocate IRQ chip dynamic pinctrl: cherryview: Fix irq_valid_mask calculation pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
-
- 09 Nov, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few regressions and fixes for stable. Regressions: - fix a race leading to metadata space leak after task received a signal - un-deprecate 2 ioctls, marked as deprecated by mistake Fixes: - fix limit check for number of devices during chunk allocation - fix a race due to double evaluation of i_size_read inside max() macro, can cause a crash - remove wrong device id check in tree-checker" * tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: un-deprecate ioctls START_SYNC and WAIT_SYNC btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range Btrfs: fix race leading to metadata space leak after task received signal btrfs: tree-checker: Fix wrong check on max devid btrfs: Consider system chunk array size for new SYSTEM chunks
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: - cpwd: fix build regression - pm8916_wdt: fix pretimeout registration flow - meson: Fix the wrong value of left time - imx_sc_wdt: Pretimeout should follow SCU firmware format - bd70528: Add MODULE_ALIAS to allow module auto loading * tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog: watchdog: bd70528: Add MODULE_ALIAS to allow module auto loading watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format watchdog: meson: Fix the wrong value of left time watchdog: pm8916_wdt: fix pretimeout registration flow watchdog: cpwd: fix build regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) BPF sample build fixes from Björn Töpel 2) Fix powerpc bpf tail call implementation, from Eric Dumazet. 3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet. 4) Fix crash in ebtables when using dnat target, from Florian Westphal. 5) Fix port disable handling whne removing bcm_sf2 driver, from Florian Fainelli. 6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski. 7) Various KCSAN fixes all over the networking, from Eric Dumazet. 8) Memory leaks in mlx5 driver, from Alex Vesker. 9) SMC interface refcounting fix, from Ursula Braun. 10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu. 11) Add a TX lock to synchonize the kTLS TX path properly with crypto operations. From Jakub Kicinski. 12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano Garzarella. 13) Infinite loop in Intel ice driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits) ixgbe: need_wakeup flag might not be set for Tx i40e: need_wakeup flag might not be set for Tx igb/igc: use ktime accessors for skb->tstamp i40e: Fix for ethtool -m issue on X722 NIC iavf: initialize ITRN registers with correct values ice: fix potential infinite loop because loop counter being too small qede: fix NULL pointer deref in __qede_remove() net: fix data-race in neigh_event_send() vsock/virtio: fix sock refcnt holding during the shutdown net: ethernet: octeon_mgmt: Account for second possible VLAN header mac80211: fix station inactive_time shortly after boot net/fq_impl: Switch to kvmalloc() for memory allocation mac80211: fix ieee80211_txq_setup_flows() failure path ipv4: Fix table id reference in fib_sync_down_addr ipv6: fixes rt6_probe() and fib6_nh->last_probe init net: hns: Fix the stray netpoll locks causing deadlock in NAPI path net: usb: qmi_wwan: add support for DW5821e with eSIM support CDC-NCM: handle incomplete transfer of MTU nfc: netlink: fix double device reference drop NFC: st21nfca: fix double free ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Two NVMe device removal crash fixes, and a compat fixup for for an ioctl that was introduced in this release (Anton, Charles, Max - via Keith) - Missing error path mutex unlock for drbd (Dan) - cgroup writeback fixup on dead memcg (Tejun) - blkcg online stats print fix (Tejun) * tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block: cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead block: drbd: remove a stray unlock in __drbd_send_protocol() blkcg: make blkcg_print_stat() print stats only for online blkgs nvme: change nvme_passthru_cmd64 to explicitly mark rsvd nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths nvme-rdma: fix a segmentation fault during module unload
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Fixes 2019-11-08 This series contains fixes to igb, igc, ixgbe, i40e, iavf and ice drivers. Colin Ian King fixes a potentially wrap-around counter in a for-loop. Nick fixes the default ITR values for the iavf driver to 50 usecs interval. Arkadiusz fixes 'ethtool -m' for X722 devices where the correct value cannot be obtained from the firmware, so add X722 to the check to ensure the wrong value is not returned. Jake fixes igb and igc drivers in their implementation of launch time support by declaring skb->tstamp value as ktime_t instead of s64. Magnus fixes ixgbe and i40e where the need_wakeup flag for transmit may not be set for AF_XDP sockets that are only used to send packets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Magnus Karlsson authored
The need_wakeup flag for Tx might not be set for AF_XDP sockets that are only used to send packets. This happens if there is at least one outstanding packet that has not been completed by the hardware and we get that corresponding completion (which will not generate an interrupt since interrupts are disabled in the napi poll loop) between the time we stopped processing the Tx completions and interrupts are enabled again. In this case, the need_wakeup flag will have been cleared at the end of the Tx completion processing as we believe we will get an interrupt from the outstanding completion at a later point in time. But if this completion interrupt occurs before interrupts are enable, we lose it and should at that point really have set the need_wakeup flag since there are no more outstanding completions that can generate an interrupt to continue the processing. When this happens, user space will see a Tx queue need_wakeup of 0 and skip issuing a syscall, which means will never get into the Tx processing again and we have a deadlock. This patch introduces a quick fix for this issue by just setting the need_wakeup flag for Tx to 1 all the time. I am working on a proper fix for this that will toggle the flag appropriately, but it is more challenging than I anticipated and I am afraid that this patch will not be completed before the merge window closes, therefore this easier fix for now. This fix has a negative performance impact in the range of 0% to 4%. Towards the higher end of the scale if you have driver and application on the same core and issue a lot of packets, and towards no negative impact if you use two cores, lower transmission speeds and/or a workload that also receives packets. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Magnus Karlsson authored
The need_wakeup flag for Tx might not be set for AF_XDP sockets that are only used to send packets. This happens if there is at least one outstanding packet that has not been completed by the hardware and we get that corresponding completion (which will not generate an interrupt since interrupts are disabled in the napi poll loop) between the time we stopped processing the Tx completions and interrupts are enabled again. In this case, the need_wakeup flag will have been cleared at the end of the Tx completion processing as we believe we will get an interrupt from the outstanding completion at a later point in time. But if this completion interrupt occurs before interrupts are enable, we lose it and should at that point really have set the need_wakeup flag since there are no more outstanding completions that can generate an interrupt to continue the processing. When this happens, user space will see a Tx queue need_wakeup of 0 and skip issuing a syscall, which means will never get into the Tx processing again and we have a deadlock. This patch introduces a quick fix for this issue by just setting the need_wakeup flag for Tx to 1 all the time. I am working on a proper fix for this that will toggle the flag appropriately, but it is more challenging than I anticipated and I am afraid that this patch will not be completed before the merge window closes, therefore this easier fix for now. This fix has a negative performance impact in the range of 0% to 4%. Towards the higher end of the scale if you have driver and application on the same core and issue a lot of packets, and towards no negative impact if you use two cores, lower transmission speeds and/or a workload that also receives packets. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
When implementing launch time support in the igb and igc drivers, the skb->tstamp value is assumed to be a s64, but it's declared as a ktime_t value. Although ktime_t is typedef'd to s64 it wasn't always, and the kernel provides accessors for ktime_t values. Use the ktime_to_timespec64 and ktime_set accessors instead of directly assuming that the variable is always an s64. This improves portability if the code is ever moved to another kernel version, or if the definition of ktime_t ever changes again in the future. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Arkadiusz Kubalewski authored
This patch contains fix for a problem with command: 'ethtool -m <dev>' which breaks functionality of: 'ethtool <dev>' when called on X722 NIC Disallowed update of link phy_types on X722 NIC Currently correct value cannot be obtained from FW Previously wrong value returned by FW was used and was a root cause for incorrect output of 'ethtool <dev>' command Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Nicholas Nunley authored
Since commit 92418fb1 ("i40e/i40evf: Use usec value instead of reg value for ITR defines") the driver tracks the interrupt throttling intervals in single usec units, although the actual ITRN registers are programmed in 2 usec units. Most register programming flows in the driver correctly handle the conversion, although it is currently not applied when the registers are initialized to their default values. Most of the time this doesn't present a problem since the default values are usually immediately overwritten through the standard adaptive throttling mechanism, or updated manually by the user, but if adaptive throttling is disabled and the interval values are left alone then the incorrect value will persist. Since the intended default interval of 50 usecs (vs. 100 usecs as programmed) performs better for most traffic workloads, this can lead to performance regressions. This patch adds the correct conversion when writing the initial values to the ITRN registers. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Colin Ian King authored
Currently the for-loop counter i is a u8 however it is being checked against a maximum value hw->num_tx_sched_layers which is a u16. Hence there is a potential wrap-around of counter i back to zero if hw->num_tx_sched_layers is greater than 255. Fix this by making i a u16. Addresses-Coverity: ("Infinite loop") Fixes: b36c598c ("ice: Updates to Tx scheduler code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 Nov, 2019 11 commits
-
-
Manish Chopra authored
While rebooting the system with SR-IOV vfs enabled leads to below crash due to recurrence of __qede_remove() on the VF devices (first from .shutdown() flow of the VF itself and another from PF's .shutdown() flow executing pci_disable_sriov()) This patch adds a safeguard in __qede_remove() flow to fix this, so that driver doesn't attempt to remove "already removed" devices. [ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc [ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.360304] PGD 0 [ 194.360325] Oops: 0000 [#1] SMP [ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200 [ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables] [ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1 [ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019 [ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000 [ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282 [ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000 [ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098 [ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000 [ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000 [ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000 [ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000 [ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0 [ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 194.362051] PKRU: 55555554 [ 194.362073] Call Trace: [ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede] [ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0 [ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0 [ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30 [ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0 [ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20 [ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160 [ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0 [ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30 [ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed] [ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed] [ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed] [ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede] [ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede] [ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60 [ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0 [ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40 [ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60 [ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260 [ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0 [ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580 [ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0 [ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10 [ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a [ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0 [ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.363764] RSP <ffff9ceabebdfac0> [ 194.363791] CR2: 00000000000008dc Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
KCSAN reported the following data-race [1] The fix will also prevent the compiler from optimizing out the condition. [1] BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1: neigh_event_send include/net/neighbour.h:443 [inline] neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474 neigh_output include/net/neighbour.h:511 [inline] ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_output+0xdf/0x210 net/ipv4/ip_output.c:432 dst_output include/net/dst.h:436 [inline] ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532 ip_queue_xmit+0x45/0x60 include/net/ip.h:237 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline] __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618 read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0: neigh_event_send include/net/neighbour.h:442 [inline] neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474 neigh_output include/net/neighbour.h:511 [inline] ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_output+0xdf/0x210 net/ipv4/ip_output.c:432 dst_output include/net/dst.h:436 [inline] ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532 ip_queue_xmit+0x45/0x60 include/net/ip.h:237 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline] __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Merge tag 'pwm/for-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fix from Thierry Reding: "One more fix to keep a reference to the driver's module as long as there are users of the PWM exposed by the driver" * tag 'pwm/for-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: bcm-iproc: Prevent unloading the driver module while in use
-
Peter Zijlstra authored
Commit 67692435 ("sched: Rework pick_next_task() slow-path") inadvertly introduced a race because it changed a previously unexplored dependency between dropping the rq->lock and sched_class::put_prev_task(). The comments about dropping rq->lock, in for example newidle_balance(), only mentions the task being current and ->on_cpu being set. But when we look at the 'change' pattern (in for example sched_setnuma()): queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */ running = task_current(rq, p); /* rq->curr == p */ if (queued) dequeue_task(...); if (running) put_prev_task(...); /* change task properties */ if (queued) enqueue_task(...); if (running) set_next_task(...); It becomes obvious that if we do this after put_prev_task() has already been called on @p, things go sideways. This is exactly what the commit in question allows to happen when it does: prev->sched_class->put_prev_task(rq, prev, rf); if (!rq->nr_running) newidle_balance(rq, rf); The newidle_balance() call will drop rq->lock after we've called put_prev_task() and that allows the above 'change' pattern to interleave and mess up the state. Furthermore, it turns out we lost the RT-pull when we put the last DL task. Fix both problems by extracting the balancing from put_prev_task() and doing a multi-class balance() pass before put_prev_task(). Fixes: 67692435 ("sched: Rework pick_next_task() slow-path") Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Quentin Perret <qperret@google.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com>
-
Qais Yousef authored
When cgroup is disabled the following compilation error was hit kernel/sched/core.c: In function ‘uclamp_update_active_tasks’: kernel/sched/core.c:1081:23: error: storage size of ‘it’ isn’t known struct css_task_iter it; ^~ kernel/sched/core.c:1084:2: error: implicit declaration of function ‘css_task_iter_start’; did you mean ‘__sg_page_iter_start’? [-Werror=implicit-function-declaration] css_task_iter_start(css, 0, &it); ^~~~~~~~~~~~~~~~~~~ __sg_page_iter_start kernel/sched/core.c:1085:14: error: implicit declaration of function ‘css_task_iter_next’; did you mean ‘__sg_page_iter_next’? [-Werror=implicit-function-declaration] while ((p = css_task_iter_next(&it))) { ^~~~~~~~~~~~~~~~~~ __sg_page_iter_next kernel/sched/core.c:1091:2: error: implicit declaration of function ‘css_task_iter_end’; did you mean ‘get_task_cred’? [-Werror=implicit-function-declaration] css_task_iter_end(&it); ^~~~~~~~~~~~~~~~~ get_task_cred kernel/sched/core.c:1081:23: warning: unused variable ‘it’ [-Wunused-variable] struct css_task_iter it; ^~ cc1: some warnings being treated as errors make[2]: *** [kernel/sched/core.o] Error 1 Fix by protetion uclamp_update_active_tasks() with CONFIG_UCLAMP_TASK_GROUP Fixes: babbe170 ("sched/uclamp: Update CPU's refcount on TG's clamp changes") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Patrick Bellasi <patrick.bellasi@matbug.net> Cc: Mel Gorman <mgorman@suse.de> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Ben Segall <bsegall@google.com> Link: https://lkml.kernel.org/r/20191105112212.596-1-qais.yousef@arm.com
-
Tejun Heo authored
cgroup writeback tries to refresh the associated wb immediately if the current wb is dead. This is to avoid keeping issuing IOs on the stale wb after memcg - blkcg association has changed (ie. when blkcg got disabled / enabled higher up in the hierarchy). Unfortunately, the logic gets triggered spuriously on inodes which are associated with dead cgroups. When the logic is triggered on dead cgroups, the attempt fails only after doing quite a bit of work allocating and initializing a new wb. While c3aab9a0 ("mm/filemap.c: don't initiate writeback if mapping has no dirty pages") alleviated the issue significantly as it now only triggers when the inode has dirty pages. However, the condition can still be triggered before the inode is switched to a different cgroup and the logic simply doesn't make sense. Skip the immediate switching if the associated memcg is dying. This is a simplified version of the following two patches: * https://lore.kernel.org/linux-mm/20190513183053.GA73423@dennisz-mbp/ * http://lkml.kernel.org/r/156355839560.2063.5265687291430814589.stgit@buzz Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: e8a7abf5 ("writeback: disassociate inodes from dying bdi_writebacks") Acked-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "Some late-breaking dentry handling fixes from Al and Jeff, a patch to further restrict copy_file_range() to avoid potential data corruption from Luis and a fix for !CONFIG_CEPH_FSCACHE kernels. Everything but the fscache fix is marked for stable" * tag 'ceph-for-5.4-rc7' of git://github.com/ceph/ceph-client: ceph: return -EINVAL if given fsc mount option on kernel w/o support ceph: don't allow copy_file_range when stripe_count != 1 ceph: don't try to handle hashed dentries in non-O_CREAT atomic_open ceph: add missing check in d_revalidate snapdir handling ceph: fix RCU case handling in ceph_d_revalidate() ceph: fix use-after-free in __ceph_remove_cap()
-
Stefano Garzarella authored
The "42f5cda5" commit rightly set SOCK_DONE on peer shutdown, but there is an issue if we receive the SHUTDOWN(RDWR) while the virtio_transport_close_timeout() is scheduled. In this case, when the timeout fires, the SOCK_DONE is already set and the virtio_transport_close_timeout() will not call virtio_transport_reset() and virtio_transport_do_close(). This causes that both sockets remain open and will never be released, preventing the unloading of [virtio|vhost]_transport modules. This patch fixes this issue, calling virtio_transport_reset() and virtio_transport_do_close() when we receive the SHUTDOWN(RDWR) and there is nothing left to read. Fixes: 42f5cda5 ("vsock/virtio: set SOCK_DONE on peer shutdown") Cc: Stephen Barber <smbarber@chromium.org> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-net-2019-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three small fixes: * we hit a failure path bug related to ieee80211_txq_setup_flows() * also use kvmalloc() to make that less likely * fix a timing value shortly after boot (during INITIAL_JIFFIES) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Sverdlin authored
Octeon's input ring-buffer entry has 14 bits-wide size field, so to account for second possible VLAN header max_mtu must be further reduced. Fixes: 109cc165 ("ethernet/cavium: use core min/max MTU checking") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull modules fix from Jessica Yu: "Fix `make nsdeps` for modules composed of multiple source files. Since $mod_source_files was not in quotes in the call to generate_deps_for_ns(), not all the source files for a module were being passed to spatch" * tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: scripts/nsdeps: make sure to pass all module source files to spatch
-