Shannon Nelson says:

====================
ionic: fw upgrade bug fixes

These patches address issues found in additional internal
fw-upgrade testing.

v2:
 - replaced extra state flag with postponing first link check
 - added device reset patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Doing a device reset addresses an obscure FW timing issue in
the FW upgrade process.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure we can report the new FW version after a
fw-upgrade has finished by re-reading the device's
fw version information.

Fixes: c672412f ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't bother with the link check during probe, let
the watchdog notice the first link-up.  This allows
probe to finish cleanly without any interruptions
from over excited user programs opening the device
as soon as it is registered.

Fixes: c672412f ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

In this code, it appears that phyter_clocks is a list head, based on
the previous list_for_each, and that clock->list is intended to be a
list element, given that it has just been initialized in
dp83640_clock_init.  Accordingly, switch the arguments to
list_add_tail, which takes the list head as the second argument.

Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

User space can request to delete a range of VLANs from a bridge slave in
one netlink request. For each deleted VLAN the FDB needs to be traversed
in order to flush all the affected entries.

If a large range of VLANs is deleted and the number of FDB entries is
large or the FDB lock is contented, it is possible for the kernel to
loop through the deleted VLANs for a long time. In case preemption is
disabled, this can result in a soft lockup.

Fix this by adding a schedule point after each VLAN is deleted to yield
the CPU, if needed. This is safe because the VLANs are traversed in
process context.

Fixes: bdced7ef ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Tested-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During MTU change, the following events may happen.
Client-driven CRQ initialization fails due to partner’s CRQ closed,
causing client to enqueue a reset task for FATAL_ERROR. Then passive
(server-driven) CRQ initialization succeeds, causing client to
release CRQ and enqueue a reset task for failover. If the passive
CRQ initialization occurs before the FATAL reset task is processed,
the FATAL error reset task would try to access a CRQ message queue
that was freed, causing an oops. The problem may be most likely to
occur during DLPAR add vNIC with a non-default MTU, because the DLPAR
process will automatically issue a change MTU request.

Fix this by not processing fatal error reset if CRQ is passively
initialized after client-driven CRQ initialization fails.
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2020-04-29

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

v2:
 - Dropped the ktls patch, Tariq has to check if it is fixable in the stack

For -stable v4.12
 ('net/mlx5: Fix forced completion access non initialized command entry')
 ('net/mlx5: Fix command entry leak in Internal Error State')

For -stable v5.4
 ('net/mlx5: DR, On creation set CQ's arm_db member to right value')

For -stable v5.6
 ('net/mlx5e: Fix q counters on uplink representors')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_v{4,6}_syn_recv_sock() set 'own_req' only when returning
a not NULL 'child', let's check 'own_req' only if child is
available to avoid an - unharmful - UBSAN splat.

v1 -> v2:
 - reference the correct hash

Fixes: 4c8941de ("mptcp: avoid flipping mp_capable field in syn_recv_sock()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
mptcp: fix incoming options parsing

This series addresses a serious issue in MPTCP option parsing.

This is bigger than the usual -net change, but I was unable to find a
working, sane, smaller fix.

The core change is inside patch 2/5 which moved MPTCP options parsing from
the TCP code inside existing MPTCP hooks and clean MPTCP options status on
each processed packet.

The patch 1/5 is a needed pre-requisite, and patches 3,4,5 are smaller,
related fixes.

v1 -> v2:
 - cleaned-up patch 1/5
 - rebased on top of current -net
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When parsing MPC+data packets we set the dss field, so
we must also initialize the data_fin, or we can find stray
value there.

Fixes: 9a19371b ("mptcp: fix data_fin handing in RX path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mentioned RX option field is initialized only for DSS
packet, we must access it only if 'dss' is set too, or
the subflow will end-up in a bad status, leading to
RFC violations.

Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzcaller has found a way to trigger the WARN_ON_ONCE condition
in check_fully_established().

The root cause is a legit fallback to TCP scenario, so replace
the WARN with a plain message on a more strict condition.

Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mptcp_options_received structure carries several per
packet flags (mp_capable, mp_join, etc.). Such fields must
be cleared on each packet, even on dropped ones or packet
not carrying any MPTCP options, but the current mptcp
code clears them only on TCP option reset.

On several races/corner cases we end-up with stray bits in
incoming options, leading to WARN_ON splats. e.g.:

[  171.164906] Bad mapping: ssn=32714 map_seq=1 map_data_len=32713
[  171.165006] WARNING: CPU: 1 PID: 5026 at net/mptcp/subflow.c:533 warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531)
[  171.167632] Modules linked in: ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel geneve ip6_udp_tunnel udp_tunnel macsec macvtap tap ipvlan macvlan 8021q garp mrp xfrm_interface veth netdevsim nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun binfmt_misc intel_rapl_msr intel_rapl_common rfkill kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel joydev virtio_balloon pcspkr i2c_piix4 sunrpc ip_tables xfs libcrc32c crc32c_intel serio_raw virtio_console ata_generic virtio_blk virtio_net net_failover failover ata_piix libata
[  171.199464] CPU: 1 PID: 5026 Comm: repro Not tainted 5.7.0-rc1.mptcp_f227fdf5d388+ #95
[  171.200886] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[  171.202546] RIP: 0010:warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531)
[  171.206537] Code: c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 1d 8b 55 3c 44 89 e6 48 c7 c7 20 51 13 95 e8 37 8b 22 fe <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 89 4c 24 04 e8 db d6 94 fe 8b 4c
[  171.220473] RSP: 0018:ffffc90000150560 EFLAGS: 00010282
[  171.221639] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  171.223108] RDX: 0000000000000000 RSI: 0000000000000008 RDI: fffff5200002a09e
[  171.224388] RBP: ffff8880aa6e3c00 R08: 0000000000000001 R09: fffffbfff2ec9955
[  171.225706] R10: ffffffff9764caa7 R11: fffffbfff2ec9954 R12: 0000000000007fca
[  171.227211] R13: ffff8881066f4a7f R14: ffff8880aa6e3c00 R15: 0000000000000020
[  171.228460] FS:  00007f8623719740(0000) GS:ffff88810be00000(0000) knlGS:0000000000000000
[  171.230065] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  171.231303] CR2: 00007ffdab190a50 CR3: 00000001038ea006 CR4: 0000000000160ee0
[  171.232586] Call Trace:
[  171.233109]  <IRQ>
[  171.233531] get_mapping_status (linux-mptcp/net/mptcp/subflow.c:691)
[  171.234371] mptcp_subflow_data_available (linux-mptcp/net/mptcp/subflow.c:736 linux-mptcp/net/mptcp/subflow.c:832)
[  171.238181] subflow_state_change (linux-mptcp/net/mptcp/subflow.c:1085 (discriminator 1))
[  171.239066] tcp_fin (linux-mptcp/net/ipv4/tcp_input.c:4217)
[  171.240123] tcp_data_queue (linux-mptcp/./include/linux/compiler.h:199 linux-mptcp/net/ipv4/tcp_input.c:4822)
[  171.245083] tcp_rcv_established (linux-mptcp/./include/linux/skbuff.h:1785 linux-mptcp/./include/net/tcp.h:1774 linux-mptcp/./include/net/tcp.h:1847 linux-mptcp/net/ipv4/tcp_input.c:5238 linux-mptcp/net/ipv4/tcp_input.c:5730)
[  171.254089] tcp_v4_rcv (linux-mptcp/./include/linux/spinlock.h:393 linux-mptcp/net/ipv4/tcp_ipv4.c:2009)
[  171.258969] ip_protocol_deliver_rcu (linux-mptcp/net/ipv4/ip_input.c:204 (discriminator 1))
[  171.260214] ip_local_deliver_finish (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/ipv4/ip_input.c:232)
[  171.261389] ip_local_deliver (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:252)
[  171.265884] ip_rcv (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:539)
[  171.273666] process_backlog (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/core/dev.c:6135)
[  171.275328] net_rx_action (linux-mptcp/net/core/dev.c:6572 linux-mptcp/net/core/dev.c:6640)
[  171.280472] __do_softirq (linux-mptcp/./arch/x86/include/asm/jump_label.h:25 linux-mptcp/./include/linux/jump_label.h:200 linux-mptcp/./include/trace/events/irq.h:142 linux-mptcp/kernel/softirq.c:293)
[  171.281379] do_softirq_own_stack (linux-mptcp/arch/x86/entry/entry_64.S:1083)
[  171.282358]  </IRQ>

We could address the issue clearing explicitly the relevant fields
in several places - tcp_parse_option, tcp_fast_parse_options,
possibly others.

Instead we move the MPTCP option parsing into the already existing
mptcp ingress hook, so that we need to clear the fields in a single
place.

This allows us dropping an MPTCP hook from the TCP code and
removing the quite large mptcp_options_received from the tcp_sock
struct. On the flip side, the MPTCP sockets will traverse the
option space twice (in tcp_parse_option() and in
mptcp_incoming_options(). That looks acceptable: we already
do that for syn and 3rd ack packets, plain TCP socket will
benefit from it, and even MPTCP sockets will experience better
code locality, reducing the jumps between TCP and MPTCP code.

v1 -> v2:
 - rebased on current '-net' tree

Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the MPTCP code uses 2 hooks to process syn-ack
packets, mptcp_rcv_synsent() and the sk_rx_dst_set()
callback.

We can drop the first, moving the relevant code into the
latter, reducing the hooking into the TCP code. This is
also needed by the next patch.

v1 -> v2:
 - use local tcp sock ptr instead of casting the sk variable
   several times - DaveM
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Need to allocate the q counters before init_rx which needs them
when creating the rq.

Fixes: 8520fa57 ("net/mlx5e: Create q counters on uplink representors")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Processing commands by cmd_work_handler() while already in Internal
Error State will result in entry leak, since the handler process force
completion without doorbell. Forced completion doesn't release the entry
and event completion will never arrive, so entry should be released.

Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

mlx5_cmd_flush() will trigger forced completions to all valid command
entries. Triggered by an asynch event such as fast teardown it can
happen at any stage of the command, including command initialization.
It will trigger forced completion and that can lead to completion on an
uninitialized command entry.

Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is
initialized will ensure force completion is treated only if command
entry is initialized.

Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

In polling mode, set arm_db member to a value that will avoid CQ
event recovery by the HW.
Otherwise we might get event without completion function.
In addition,empty completion function to was added to protect from
unexpected events.

Fixes: 297ccceb ("net/mlx5: DR, Expose an internal API to issue RDMA operations")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

In cited patch mutex is initialized after its used.
Below call trace is observed.
Fix the order to initialize the mutex early enough.
Similarly follow mirror sequence during cleanup.

kernel: DEBUG_LOCKS_WARN_ON(lock->magic != lock)
kernel: WARNING: CPU: 5 PID: 45916 at kernel/locking/mutex.c:938
__mutex_lock+0x7d6/0x8a0
kernel: Call Trace:
kernel: ? esw_vport_tbl_get+0x3b/0x250 [mlx5_core]
kernel: ? mark_held_locks+0x55/0x70
kernel: ? __slab_free+0x274/0x400
kernel: ? lockdep_hardirqs_on+0x140/0x1d0
kernel: esw_vport_tbl_get+0x3b/0x250 [mlx5_core]
kernel: ? mlx5_esw_chains_create_fdb_prio+0xa57/0xc20 [mlx5_core]
kernel: mlx5_esw_vport_tbl_get+0x88/0xf0 [mlx5_core]
kernel: mlx5_esw_chains_create+0x2f3/0x3e0 [mlx5_core]
kernel: esw_create_offloads_fdb_tables+0x11d/0x580 [mlx5_core]
kernel: esw_offloads_enable+0x26d/0x540 [mlx5_core]
kernel: mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core]
kernel: mlx5_devlink_eswitch_mode_set+0x1af/0x320 [mlx5_core]
kernel: devlink_nl_cmd_eswitch_set_doit+0x41/0xb0

Fixes: 96e32687 ("net/mlx5e: Eswitch, Use per vport tables for mirroring")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When mlx5_modify_header_alloc() fails, instead of printing the error
value returned, current error log prints 0.

Fix by printing correct error value returned by
mlx5_modify_header_alloc().

Fixes: 6724e66b ("net/mlx5: E-Switch, Get reg_c1 value on miss")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Error unwinding is done incorrectly in the cited commit.
When steering init fails, there is no need to perform steering cleanup.
When vport error exists, error cleanup should be mirror of the setup
routine, i.e. to perform steering cleanup before metadata cleanup.

This avoids the call trace in accessing uninitialized objects which are
skipped during steering_init() due to failure in steering_init().

Call trace:
mlx5_cmd_modify_header_alloc:805:(pid 21128): too many modify header
actions 1, max supported 0
E-Switch: Failed to create restore mod header

BUG: kernel NULL pointer dereference, address: 00000000000000d0
[  677.263079]  mlx5_destroy_flow_group+0x13/0x80 [mlx5_core]
[  677.268921]  esw_offloads_steering_cleanup+0x51/0xf0 [mlx5_core]
[  677.275281]  esw_offloads_enable+0x1a5/0x800 [mlx5_core]
[  677.280949]  mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core]
[  677.287227]  mlx5_devlink_eswitch_mode_set+0x1af/0x320
[  677.293741]  devlink_nl_cmd_eswitch_set_doit+0x41/0xb0
[  677.299217]  genl_rcv_msg+0x1eb/0x430

Fixes: 7983a675 ("net/mlx5: E-Switch, Enable chains only if regs loopback is enabled")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Jason A. Donenfeld says:

====================
wireguard fixes for 5.7-rc4

This series contains two fixes and a cleanup for wireguard:

1) Removal of a spurious newline, from Sultan Alsawaf.

2) Fix for a memory leak in an error path, in which memory allocated
   prior to the error wasn't freed, reported by Sultan Alsawaf.

3) Fix to ECN support to use RFC6040 properly like all the other tunnel
   drivers, from Toke Høiland-Jørgensen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

WireGuard currently only propagates ECN markings on tunnel decap according
to the old RFC3168 specification. However, the spec has since been updated
in RFC6040 to recommend slightly different decapsulation semantics. This
was implemented in the kernel as a set of common helpers for ECN
decapsulation, so let's just switch over WireGuard to using those, so it
can benefit from this enhancement and any future tweaks. We do not drop
packets with invalid ECN marking combinations, because WireGuard is
frequently used to work around broken ISPs, which could be doing that.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Reported-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
Cc: Dave Taht <dave.taht@gmail.com>
Cc: Rodney W. Grimes <ietf@gndrsh.dnsmgr.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior, if the alloc_percpu of packet_percpu_multicore_worker_alloc
failed, the previously allocated ptr_ring wouldn't be freed. This commit
adds the missing call to ptr_ring_cleanup in the error case.
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit removes a useless newline at the end of a scope, which
doesn't add anything in the way of organization or readability.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo points out that mptcp_disconnect is bogus:
"lock_sock(sk);
looks suspicious (lock should be already held by the caller)
And call to: tcp_disconnect(sk, flags); too, sk is not a tcp
socket".

->disconnect() gets called from e.g. inet_stream_connect when
one tries to disassociate a connected socket again (to re-connect
without closing the socket first).
MPTCP however uses mptcp_stream_connect, not inet_stream_connect,
for the mptcp-socket connect call.

inet_stream_connect only gets called indirectly, for the tcp socket,
so any ->disconnect() calls end up calling tcp_disconnect for that
tcp subflow sk.

This also explains why syzkaller has not yet reported a problem
here.  So for now replace this with a stub that doesn't do anything.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/14Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

These struct members named 'phylink_validate' was assigned twice:

static const struct mv88e6xxx_ops mv88e6190_ops = {
	......
	.phylink_validate = mv88e6390_phylink_validate,
	......
	.phylink_validate = mv88e6390_phylink_validate,
};

static const struct mv88e6xxx_ops mv88e6190x_ops = {
	......
	.phylink_validate = mv88e6390_phylink_validate,
	......
	.phylink_validate = mv88e6390x_phylink_validate,
};

static const struct mv88e6xxx_ops mv88e6191_ops = {
	......
	.phylink_validate = mv88e6390_phylink_validate,
	......
	.phylink_validate = mv88e6390_phylink_validate,
};

static const struct mv88e6xxx_ops mv88e6290_ops = {
	......
	.phylink_validate = mv88e6390_phylink_validate,
	......
	.phylink_validate = mv88e6390_phylink_validate,
};

Remove all the first one and leave the second one which are been used in
fact. Be aware that for 'mv88e6190x_ops' the assignment functions is
different while the others are all the same. This fixes the following
coccicheck warning:

drivers/net/dsa/mv88e6xxx/chip.c:3911:48-49: phylink_validate: first
occurrence line 3965, second occurrence line 3967
drivers/net/dsa/mv88e6xxx/chip.c:3970:49-50: phylink_validate: first
occurrence line 4024, second occurrence line 4026
drivers/net/dsa/mv88e6xxx/chip.c:4029:48-49: phylink_validate: first
occurrence line 4082, second occurrence line 4085
drivers/net/dsa/mv88e6xxx/chip.c:4184:48-49: phylink_validate: first
occurrence line 4238, second occurrence line 4242

Fixes: 4262c38d ("net: dsa: mv88e6xxx: Add SERDES stats counters to all 6390 family members")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should check null before do x25_neigh_put in x25_disconnect,
otherwise may cause null-ptr-deref like this:

 #include <sys/socket.h>
 #include <linux/x25.h>

 int main() {
    int sck_x25;
    sck_x25 = socket(AF_X25, SOCK_SEQPACKET, 0);
    close(sck_x25);
    return 0;
 }

BUG: kernel NULL pointer dereference, address: 00000000000000d8
CPU: 0 PID: 4817 Comm: t2 Not tainted 5.7.0-rc3+ #159
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-
RIP: 0010:x25_disconnect+0x91/0xe0
Call Trace:
 x25_release+0x18a/0x1b0
 __sock_release+0x3d/0xc0
 sock_close+0x13/0x20
 __fput+0x107/0x270
 ____fput+0x9/0x10
 task_work_run+0x6d/0xb0
 exit_to_usermode_loop+0x102/0x110
 do_syscall_64+0x23c/0x260
 entry_SYSCALL_64_after_hwframe+0x49/0xb3

Reported-by: syzbot+6db548b615e5aeefdce2@syzkaller.appspotmail.com
Fixes: 4becb7ee ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes the following build warning in ena_xdp_set(), which is
observed on aarch64 with 64KB page size.

   In file included from ./include/net/inet_sock.h:19,
      from ./include/net/ip.h:27,
      from drivers/net/ethernet/amazon/ena/ena_netdev.c:46:
   drivers/net/ethernet/amazon/ena/ena_netdev.c: In function         \
   ‘ena_xdp_set’:                                                    \
   drivers/net/ethernet/amazon/ena/ena_netdev.c:557:6: warning:      \
   format ‘%lu’                                                      \
   expects argument of type ‘long unsigned int’, but argument 4      \
   has type ‘int’                                                    \
   [-Wformat=] "Failed to set xdp program, the current MTU (%d) is   \
   larger than the maximum allowed MTU (%lu) while xdp is on",
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - fix random number generation in network coding, by George Spelvin

 - fix reference counter leaks, by Xiyu Yang (3 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A call to 'dma_alloc_coherent()' is hidden in 'sonic_alloc_descriptors()',
called from 'sonic_probe1()'.

This is correctly freed in the remove function, but not in the error
handling path of the probe function.
Fix it and add the missing 'dma_free_coherent()' call.

While at it, rename a label in order to be slightly more informative.

Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 3c1bcc86 ("net: ethernet: Convert phydev advertize and
supported from u32 to link mode") updated ethernet drivers to use a
linkmode bitmap. It mistakenly dropped a bitwise negation in the
tc35815 ethernet driver on a bitmask to set the supported/advertising
flags.

Found by Anthony via code inspection, not tested as I do not have the
required hardware.

Fixes: 3c1bcc86 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode")
Signed-off-by: Anthony Felice <tony.felice@timesys.com>
Reviewed-by: Akshay Bhat <akshay.bhat@timesys.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot managed to set up sfq so that q->scaled_quantum was zero,
triggering an infinite loop in sfq_dequeue()

More generally, we must only accept quantum between 1 and 2^18 - 7,
meaning scaled_quantum must be in [1, 0x7FFF] range.

Otherwise, we also could have a loop in sfq_dequeue()
if scaled_quantum happens to be 0x8000, since slot->allot
could indefinitely switch between 0 and 0x8000.

Fixes: eeaeb068 ("sch_sfq: allow big packets and be fair")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+0251e883fe39e7a0cb0a@syzkaller.appspotmail.com
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

A collection of 5 miscellaneous bug fixes covering VF anti-spoof setup
issues, devlink MSIX max value, AER, context memory allocation error
path, and VLAN acceleration logic.

Please queue for -stable.  Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current logic in bnxt_fix_features() will inadvertently turn on both
CTAG and STAG VLAN offload if the user tries to disable both.  Fix it
by checking that the user is trying to enable CTAG or STAG before
enabling both.  The logic is supposed to enable or disable both CTAG and
STAG together.

Fixes: 5a9f6b23 ("bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_alloc_ctx_pg_tbls() should return error when the memory size of the
context memory to set up is zero.  By returning success (0), the caller
may proceed normally and may crash later when it tries to set up the
memory.

Fixes: 08fe9d18 ("bnxt_en: Add Level 2 context memory paging support.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Improve the slot reset sequence by disabling the device to prevent bad
DMAs if slot reset fails.  Return the proper result instead of always
PCI_ERS_RESULT_RECOVERED to the caller.

Fixes: 6316ea6d ("bnxt_en: Enable AER support.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Broadcom adapters support only maximum of 512 CQs per PF. If user sets
MSIx vectors more than supported CQs, firmware is setting incorrect value
for msix_vec_per_pf_max parameter. Fix it by reducing the BNXT_MSIX_VEC_MAX
value to 512, even though the maximum # of MSIx vectors supported by adapter
are 1280.

Fixes: f399e849 ("bnxt_en: Use msix_vec_per_pf_max and msix_vec_per_pf_min devlink params.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the logic that sets the enable/disable flag for the source MAC
filter according to firmware spec 1.7.1.

In the original firmware spec. before 1.7.1, the VF spoof check flags
were not latched after making the HWRM_FUNC_CFG call, so there was a
need to keep the func_flags so that subsequent calls would perserve
the VF spoof check setting.  A change was made in the 1.7.1 spec
so that the flags became latched.  So we now set or clear the anti-
spoof setting directly without retrieving the old settings in the
stored vf->func_flags which are no longer valid.  We also remove the
unneeded vf->func_flags.

Fixes: 8eb992e8 ("bnxt_en: Update firmware interface spec to 1.7.6.2.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>