- 17 Feb, 2018 20 commits
-
-
Bradley Bolen authored
commit 7f29ae9f upstream. This fixes a race with idr_alloc where gd->first_minor can be set to the same value for two simultaneous calls to ubiblock_create. Each instance calls device_add_disk with the same first_minor. device_add_disk calls bdi_register_owner which generates several warnings. WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/devices/virtual/bdi/252:2' WARNING: CPU: 1 PID: 179 at kernel-source/lib/kobject.c:240 kobject_add_internal+0x1ec/0x2f8 kobject_add_internal failed for 252:2 with -EEXIST, don't try to register things with the same name in the same directory WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/dev/block/252:2' However, device_add_disk does not error out when bdi_register_owner returns an error. Control continues until reaching blk_register_queue. It then BUGs. kernel BUG at kernel-source/fs/sysfs/group.c:113! [<c01e26cc>] (internal_create_group) from [<c01e2950>] (sysfs_create_group+0x20/0x24) [<c01e2950>] (sysfs_create_group) from [<c00e3d38>] (blk_trace_init_sysfs+0x18/0x20) [<c00e3d38>] (blk_trace_init_sysfs) from [<c02bdfbc>] (blk_register_queue+0xd8/0x154) [<c02bdfbc>] (blk_register_queue) from [<c02cec84>] (device_add_disk+0x194/0x44c) [<c02cec84>] (device_add_disk) from [<c0436ec8>] (ubiblock_create+0x284/0x2e0) [<c0436ec8>] (ubiblock_create) from [<c0427bb8>] (vol_cdev_ioctl+0x450/0x554) [<c0427bb8>] (vol_cdev_ioctl) from [<c0189110>] (vfs_ioctl+0x30/0x44) [<c0189110>] (vfs_ioctl) from [<c01892e0>] (do_vfs_ioctl+0xa0/0x790) [<c01892e0>] (do_vfs_ioctl) from [<c0189a14>] (SyS_ioctl+0x44/0x68) [<c0189a14>] (SyS_ioctl) from [<c0010640>] (ret_fast_syscall+0x0/0x34) Locking idr_alloc/idr_remove removes the race and keeps gd->first_minor unique. Fixes: 2bf50d42 ("UBI: block: Dynamically allocate minor numbers") Signed-off-by:
Bradley Bolen <bradleybolen@gmail.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sascha Hauer authored
commit f78e5623 upstream. The fastmap update code might erase the current fastmap anchor PEB in case it doesn't find any new free PEB. When a power cut happens in this situation we must not have any outdated fastmap anchor PEB on the device, because that would be used to attach during next boot. The easiest way to make that sure is to erase all outdated fastmap anchor PEBs synchronously during attach. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
-
Miquel Raynal authored
commit f4c6cd1a upstream. When the requested ECC strength does not exactly match the strengths supported by the ECC engine, the driver is selecting the closest strength meeting the 'selected_strength > requested_strength' constraint. Fix the fact that, in this particular case, ecc->strength value was not updated to match the 'selected_strength'. For instance, one can encounter this issue when no ECC requirement is filled in the device tree while the NAND chip minimum requirement is not a strength/step_size combo natively supported by the ECC engine. Fixes: 1fef62c1 ("mtd: nand: add sunxi NAND flash controller support") Suggested-by:
Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by:
-
Miquel Raynal authored
commit 87e89ce8 upstream. Starting from commit 041e4575 ("mtd: nand: handle ECC errors in OOB"), nand_do_read_oob() (from the NAND core) did return 0 or a negative error, and the MTD layer expected it. However, the trend for the NAND layer is now to return an error or a positive number of bitflips. Deciding which status to return to the user belongs to the MTD layer. Commit e47f6858 ("mtd: check for max_bitflips in mtd_read_oob()") brought this logic to the mtd_read_oob() function while the return value coming from nand_do_read_oob() (called by the ->_read_oob() hook) was left unchanged. Fixes: e47f6858 ("mtd: check for max_bitflips in mtd_read_oob()") Signed-off-by:
-
Kamal Dasu authored
commit f953f0f8 upstream. Brcm nand controller prefetch feature needs to be disabled by default. Enabling affects performance on random reads as well as dma reads. Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 9e343e87 upstream. The map_word_() functions, dating back to linux-2.6.8, try to perform bitwise operations on a 'map_word' structure. This may have worked with compilers that were current then (gcc-3.4 or earlier), but end up being rather inefficient on any version I could try now (gcc-4.4 or higher). Specifically we hit a problem analyzed in gcc PR81715 where we fail to reuse the stack space for local variables. This can be seen immediately in the stack consumption for cfi_staa_erase_varsize() and other functions that (with CONFIG_KASAN) can be up to 2200 bytes. Changing the inline functions into macros brings this down to 1280 bytes. Without KASAN, the same problem exists, but the stack consumption is lower to start with, my patch shrinks it from 920 to 496 bytes on with arm-linux-gnueabi-gcc-5.4, and saves around 1KB in .text size for cfi_cmdset_0020.c, as it avoids copying map_word structures for each call to one of these helpers. With the latest gcc-8 snapshot, the problem is fixed in upstream gcc, but nobody uses that yet, so we should still work around it in mainline kernels and probably backport the workaround to stable kernels as well. We had a couple of other functions that suffered from the same gcc bug, and all of those had a simpler workaround involving dummy variables in the inline function. Unfortunately that did not work here, the macro hack was the best I could come up with. It would also be helpful to have someone to a little performance testing on the patch, to see how much it helps in terms of CPU utilitzation. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Arvind Yadav authored
commit c0f71bbb upstream. Here, hdpvr_register_videodev() is responsible for setup and register a video device. Also defining and initializing a worker. hdpvr_register_videodev() is calling by hdpvr_probe at last. So no need to flush any work here. Unregister v4l2, free buffers and memory. If hdpvr_probe() will fail. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Malcolm Priestley authored
commit 7bf7a711 upstream. When the tuner was split from m88rs2000 the attach function is in wrong place. Move to dm04_lme2510_tuner to trap errors on failure and removing a call to lme_coldreset. Prevents driver starting up without any tuner connected. Fixes to trap for ts2020 fail. LME2510(C): FE Found M88RS2000 ts2020: probe of 0-0060 failed with error -11 ... LME2510(C): TUN Found RS2000 tuner kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Reported-by:
Malcolm Priestley <tvboxspy@gmail.com> Tested-by:
-
Malcolm Priestley authored
commit 3d932ee2 upstream. Warm start has no check as whether a genuine device has connected and proceeds to next execution path. Check device should read 0x47 at offset of 2 on USB descriptor read and it is the amount requested of 6 bytes. Fix for kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access as Reported-by:
-
Mohamed Ghannam authored
commit 69c64866 upstream. Whenever the sock object is in DCCP_CLOSED state, dccp_disconnect() must free dccps_hc_tx_ccid and dccps_hc_rx_ccid and set to NULL. Signed-off-by:
Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 364f5665 upstream. When issuing an IPI RT push, where an IPI is sent to each CPU that has more than one RT task scheduled on it, it references the root domain's rto_mask, that contains all the CPUs within the root domain that has more than one RT task in the runable state. The problem is, after the IPIs are initiated, the rq->lock is released. This means that the root domain that is associated to the run queue could be freed while the IPIs are going around. Add a sched_get_rd() and a sched_put_rd() that will increment and decrement the root domain's ref count respectively. This way when initiating the IPIs, the scheduler will up the root domain's ref count before releasing the rq->lock, ensuring that the root domain does not go away until the IPI round is complete. Reported-by:
Pavan Kondeti <pkondeti@codeaurora.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 4bdced5c ("sched/rt: Simplify the IPI based RT balancing logic") Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA@mail.gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit ad0f1d9d upstream. When the rto_push_irq_work_func() is called, it looks at the RT overloaded bitmask in the root domain via the runqueue (rq->rd). The problem is that during CPU up and down, nothing here stops rq->rd from changing between taking the rq->rd->rto_lock and releasing it. That means the lock that is released is not the same lock that was taken. Instead of using this_rq()->rd to get the root domain, as the irq work is part of the root domain, we can simply get the root domain from the irq work that is passed to the routine: container_of(work, struct root_domain, rto_push_work) This keeps the root domain consistent. Reported-by:
-
Petr Cvek authored
commit c8cd7510 upstream. Commit 76e0da34 ("usb-gadget/uvc: use per-attribute show and store methods") caused a stringification of an undefined macro argument "aname", so three UVC parameters (streaming_interval, streaming_maxpacket and streaming_maxburst) were named "aname". Add the definition of "aname" to the main macro and name the filenames as originaly intended. Signed-off-by:
Petr Cvek <petr.cvek@tul.cz> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Thomas Gleixner authored
commit cef31d9a upstream. timer_create() specifies via sigevent->sigev_notify the signal delivery for the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD and (SIGEV_SIGNAL | SIGEV_THREAD_ID). The sanity check in good_sigevent() is only checking the valid combination for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is not set it accepts any random value. This has no real effects on the posix timer and signal delivery code, but it affects show_timer() which handles the output of /proc/$PID/timers. That function uses a string array to pretty print sigev_notify. The access to that array has no bound checks, so random sigev_notify cause access beyond the array bounds. Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID masking from various code pathes as SIGEV_NONE can never be set in combination with SIGEV_THREAD_ID. Reported-by:
Eric Biggers <ebiggers3@gmail.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Hugh Dickins authored
Tobias noticed a compile error on 4.4.115, and it's the same on 4.9.80: arch/x86/mm/kaiser.c: In function ‘kaiser_init’: arch/x86/mm/kaiser.c:348:8: error: ‘vsyscall_pgprot’ undeclared (first use in this function) It seems like his combination of kernel options doesn't work for KAISER. X86_VSYSCALL_EMULATION is not set on his system, while LEGACY_VSYSCALL is set to NONE (LEGACY_VSYSCALL_NONE=y). He managed to get things compiling again, by moving the 'extern unsigned long vsyscall_pgprot' outside of the preprocessor statement. This works because the optimizer removes that code (vsyscall_enabled() is always false) - and that's how it was done in some older backports. Reported-by:Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Yang Shunyong authored
commit 66b3bd23 upstream. The type of arg passed to dmatest_callback is struct dmatest_done. It refers to test_done in struct dmatest_thread, not done_wait. Fixes: 6f6a23a2 ("dmaengine: dmatest: move callback wait ...") Signed-off-by:
Yang Shunyong <shunyong.yang@hxt-semitech.com> Acked-by:
Adam Wallis <awallis@codeaurora.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Aurelien Aptel authored
commit 97f4b727 upstream. also replaces memset()+kfree() by kzfree(). Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Daniel N Pettersson authored
commit 9aca7e45 upstream. Autonegotiation gives a security settings mismatch error if the SMB server selects an SMBv3 dialect that isn't SMB3.02. The exact error is "protocol revalidation - security settings mismatch". This can be tested using Samba v4.2 or by setting the global Samba setting max protocol = SMB3_00. The check that fails in smb3_validate_negotiate is the dialect verification of the negotiate info response. This is because it tries to verify against the protocol_id in the global smbdefault_values. The protocol_id in smbdefault_values is SMB3.02. In SMB2_negotiate the protocol_id in smbdefault_values isn't updated, it is global so it probably shouldn't be, but server->dialect is. This patch changes the check in smb3_validate_negotiate to use server->dialect instead of server->vals->protocol_id. The patch works with autonegotiate and when using a specific version in the vers mount option. Signed-off-by:
Daniel N Pettersson <danielnp@axis.com> Signed-off-by:
-
Matthew Wilcox authored
commit f04a703c upstream. If cifs_zap_mapping() returned an error, we would return without putting the xid that we got earlier. Restructure cifs_file_strict_mmap() and cifs_file_mmap() to be more similar to each other and have a single point of return that always puts the xid. Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Michal Suchanek authored
commit 1b689a95 upstream. Commit 6e032b35 ("powerpc/powernv: Check device-tree for RFI flush settings") uses u64 in asm/hvcall.h without including linux/types.h This breaks hvcall.h users that do not include the header themselves. Fixes: 6e032b35 ("powerpc/powernv: Check device-tree for RFI flush settings") Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
- 13 Feb, 2018 20 commits
-
-
Greg Kroah-Hartman authored
-
Borislav Petkov authored
commit 1f161f67 upstream with adjustments. On CPUs like AMD's Geode, for example, we shouldn't even try to load microcode because they do not support the modern microcode loading interface. However, we do the family check *after* the other checks whether the loader has been disabled on the command line or whether we're running in a guest. So move the family checks first in order to exit early if we're being loaded on an unsupported family. Reported-and-tested-by:
Sven Glodowski <glodi1@arcor.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.11.. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://bugzilla.suse.com/show_bug.cgi?id=1061396 Link: http://lkml.kernel.org/r/20171012112316.977-1-bp@alien8.deSigned-off-by:
Rolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by:
-
Laurent Pinchart authored
commit 641307df upstream. When stopping the CRTC the driver must disable all planes and wait for the change to take effect at the next vblank. Merely calling drm_crtc_wait_one_vblank() is not enough, as the function doesn't include any mechanism to handle the race with vblank interrupts. Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that handles the vblank interrupt race. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
thongsyho <thong.ho.px@rvc.renesas.com> Signed-off-by:
Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by:
-
Laurent Pinchart authored
commit cbbb90b0 upstream. When implementing support for interlaced modes, the driver switched from reporting vblank events on the vertical blanking (VBK) interrupt to the frame end interrupt (FRM). This incorrectly divided the reported refresh rate by two. Fix it by moving back to the VBK interrupt. Fixes: 906eff7f ("drm: rcar-du: Implement support for interlaced modes") Signed-off-by:
-
Kuninori Morimoto authored
commit e0936c34 upstream. commit 1f8754d4 ("ASoC: rsnd: don't call free_irq() on Parent SSI") fixed Parent SSI duplicate free_irq(). But on Renesas Sound, not only Parent SSI but also Multi SSI have same issue. This patch avoid duplicate free_irq() if it was not pure SSI. Fixes: 1f8754d4 ("ASoC: rsnd: don't call free_irq() on Parent SSI") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kuninori Morimoto authored
commit 1f8754d4 upstream. If SSI uses shared pin, some SSI will be used as parent SSI. Then, normal SSI's remove and Parent SSI's remove (these are same SSI) will be called when unbind or remove timing. In this case, free_irq() will be called twice. This patch solve this issue. Signed-off-by:
Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Reported-by:
-
Julian Scheel authored
commit 7ac45d16 upstream. In case cpu could not be found the error message would always refer to /codec/ not being found in DT. Fix this by catching the cpu node not found case explicitly. Signed-off-by:
Julian Scheel <julian@jusst.de> Signed-off-by:
-
Robert Baronescu authored
commit 5c6ac1d4 upstream. In case buffer length is a multiple of PAGE_SIZE, the S/G table is incorrectly generated. Fix this by handling buflen = k * PAGE_SIZE separately. Signed-off-by:
Robert Baronescu <robert.baronescu@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
KarimAllah Ahmed authored
(cherry picked from commit b2ac58f9) [ Based on a patch from Paolo Bonzini <pbonzini@redhat.com> ] ... basically doing exactly what we do for VMX: - Passthrough SPEC_CTRL to guests (if enabled in guest CPUID) - Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest actually used it. Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Darren Kenny <darren.kenny@oracle.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: kvm@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lkml.kernel.org/r/1517669783-20732-1-git-send-email-karahmed@amazon.deSigned-off-by:
-
KarimAllah Ahmed authored
(cherry picked from commit d28b387f) [ Based on a patch from Ashok Raj <ashok.raj@intel.com> ] Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for guests that will only mitigate Spectre V2 through IBRS+IBPB and will not be using a retpoline+IBPB based approach. To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for guests that do not actually use the MSR, only start saving and restoring when a non-zero is written to it. No attempt is made to handle STIBP here, intentionally. Filtering STIBP may be added in a future patch, which may require trapping all writes if we don't want to pass it through directly to the guest. [dwmw2: Clean up CPUID bits, save/restore manually, handle reset] Signed-off-by:
Jim Mattson <jmattson@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: kvm@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lkml.kernel.org/r/1517522386-18410-5-git-send-email-karahmed@amazon.deSigned-off-by:
-
KarimAllah Ahmed authored
(cherry picked from commit 28c1c9fa) Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO (bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the contents will come directly from the hardware, but user-space can still override it. [dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
-
Ashok Raj authored
(cherry picked from commit 15d45071) The Indirect Branch Predictor Barrier (IBPB) is an indirect branch control mechanism. It keeps earlier branches from influencing later ones. Unlike IBRS and STIBP, IBPB does not define a new mode of operation. It's a command that ensures predicted branch targets aren't used after the barrier. Although IBRS and IBPB are enumerated by the same CPUID enumeration, IBPB is very different. IBPB helps mitigate against three potential attacks: * Mitigate guests from being attacked by other guests. - This is addressed by issing IBPB when we do a guest switch. * Mitigate attacks from guest/ring3->host/ring3. These would require a IBPB during context switch in host, or after VMEXIT. The host process has two ways to mitigate - Either it can be compiled with retpoline - If its going through context switch, and has set !dumpable then there is a IBPB in that path. (Tim's patch: https://patchwork.kernel.org/patch/10192871) - The case where after a VMEXIT you return back to Qemu might make Qemu attackable from guest when Qemu isn't compiled with retpoline. There are issues reported when doing IBPB on every VMEXIT that resulted in some tsc calibration woes in guest. * Mitigate guest/ring0->host/ring0 attacks. When host kernel is using retpoline it is safe against these attacks. If host kernel isn't using retpoline we might need to do a IBPB flush on every VMEXIT. Even when using retpoline for indirect calls, in certain conditions 'ret' can use the BTB on Skylake-era CPUs. There are other mitigations available like RSB stuffing/clearing. * IBPB is issued only for SVM during svm_free_vcpu(). VMX has a vmclear and SVM doesn't. Follow discussion here: https://lkml.org/lkml/2018/1/15/146 Please refer to the following spec for more details on the enumeration and control. Refer here to get documentation about mitigations. https://software.intel.com/en-us/side-channel-security-support [peterz: rebase and changelog rewrite] [karahmed: - rebase - vmx: expose PRED_CMD if guest has it in CPUID - svm: only pass through IBPB if guest has it in CPUID - vmx: support !cpu_has_vmx_msr_bitmap()] - vmx: support nested] [dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS) PRED_CMD is a write-only MSR] Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
-
Paolo Bonzini authored
(cherry picked from commit 904e14fb) Place the MSR bitmap in struct loaded_vmcs, and update it in place every time the x2apic or APICv state can change. This is rare and the loop can handle 64 MSRs per iteration, in a similar fashion as nested_vmx_prepare_msr_bitmap. This prepares for choosing, on a per-VM basis, whether to intercept the SPEC_CTRL and PRED_CMD MSRs. Cc: stable@vger.kernel.org # prereq for Spectre mitigation Suggested-by:
-
Paolo Bonzini authored
(cherry picked from commit f21f165e) Group together the calls to alloc_vmcs and loaded_vmcs_init. Soon we'll also allocate an MSR bitmap there. Cc: stable@vger.kernel.org # prereq for Spectre mitigation Signed-off-by:
-
Jim Mattson authored
(cherry picked from commit de3a0021) The potential performance advantages of a vmcs02 pool have never been realized. To simplify the code, eliminate the pool. Instead, a single vmcs02 is allocated per VCPU when the VCPU enters VMX operation. Cc: stable@vger.kernel.org # prereq for Spectre mitigation Signed-off-by:
Mark Kanda <mark.kanda@oracle.com> Reviewed-by:
Ameya More <ameya.more@oracle.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
David Matlack authored
(cherry picked from commit c9f04407) The host physical addresses of L1's Virtual APIC Page and Posted Interrupt descriptor are loaded into the VMCS02. The CPU may write to these pages via their host physical address while L2 is running, bypassing address-translation-based dirty tracking (e.g. EPT write protection). Mark them dirty on every exit from L2 to prevent them from getting out of sync with dirty tracking. Also mark the virtual APIC page and the posted interrupt descriptor dirty when KVM is virtualizing posted interrupt processing. Signed-off-by:
David Matlack <dmatlack@google.com> Reviewed-by:
-
David Hildenbrand authored
(cherry picked from commit 6342c50a) vmx_complete_nested_posted_interrupt() can't fail, let's turn it into a void function. Signed-off-by:
-
David Hildenbrand authored
commit 42cf014d upstream. kmap() can't fail, therefore it will always return a valid pointer. Let's just get rid of the unnecessary checks. Signed-off-by:
-
Darren Kenny authored
(cherry picked from commit af189c95) Fixes: 117cc7a9 ("x86/retpoline: Fill return stack buffer on vmexit") Signed-off-by:
-
Arnd Bergmann authored
(cherry picked from commit 4bf5d56d) I'm seeing build failures from the two newly introduced arrays that are marked 'const' and '__initdata', which are mutually exclusive: arch/x86/kernel/cpu/common.c:882:43: error: 'cpu_no_speculation' causes a section type conflict with 'e820_table_firmware_init' arch/x86/kernel/cpu/common.c:895:43: error: 'cpu_no_meltdown' causes a section type conflict with 'e820_table_firmware_init' The correct annotation is __initconst. Fixes: fec9434a ("x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown") Signed-off-by:
-
