1. 18 May, 2017 5 commits
    • Marcel Holtmann's avatar
      Bluetooth: Set LE Default PHY preferences · de2ba303
      Marcel Holtmann authored
      If the LE Set Default PHY command is supported, the indicate to the
      controller that the host has no preferences for transmitter PHY or
      receiver PHY selection.
      
      Issuing this command gives the controller a clear indication that other
      PHY can be selected if available.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
      de2ba303
    • Marcel Holtmann's avatar
      Bluetooth: Enable LE PHY Update Complete event · 27bbca44
      Marcel Holtmann authored
      If either LE Set Default PHY command or LE Set PHY commands is
      supported, then enable the LE PHY Update Complete event.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
      27bbca44
    • Marcel Holtmann's avatar
      Bluetooth: Enable LE Channel Selection Algorithm event · 9756d33b
      Marcel Holtmann authored
      If the Channel Selection Algorithm #2 feature is supported, then enable
      the new LE Channel Selection Algorithm event.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
      9756d33b
    • Marcel Holtmann's avatar
      Bluetooth: Set LE Suggested Default Data Length to maximum · 12204875
      Marcel Holtmann authored
      When LE Data Packet Length Extension is supported, then actually
      increase the suggested default data length to the maximum to enable
      higher througput.
      
      < HCI Command: LE Read Maximum Data Length (0x08|0x002f) plen 0
      > HCI Event: Command Complete (0x0e) plen 12
            LE Read Maximum Data Length (0x08|0x002f) ncmd 1
              Status: Success (0x00)
              Max TX octets: 251
              Max TX time: 2120
              Max RX octets: 251
              Max RX time: 2120
      
      < HCI Command: LE Read Suggested Default Data Length (0x08|0x0023) plen 0
      > HCI Event: Command Complete (0x0e) plen 8
            LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1
              Status: Success (0x00)
              TX octets: 27
              TX time: 328
      
      < HCI Command: LE Write Suggested Default Data Length (0x08|0x0024) plen 4
              TX octets: 251
              TX time: 2120
      > HCI Event: Command Complete (0x0e) plen 4
            LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
              Status: Success (0x00)
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
      12204875
    • Tedd Ho-Jeong An's avatar
      Bluetooth: Add support for Intel Bluetooth device 9460/9560 [8087:0aaa] · 86a6129a
      Tedd Ho-Jeong An authored
      This patch adds support for Intel Bluetooth device 9460/9560 also known
      as Jefferson Peak (JfP). The firmware downloading mechanism is same as
      previous generation. So include the new USB product identifier and
      whitelist the hardware variant.
      
      T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#=  5 Spd=12   MxCh= 0
      D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
      P:  Vendor=8087 ProdID=0aaa Rev= 0.02
      C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
      I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
      E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
      E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
      I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
      E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
      I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
      I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
      I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
      I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
      I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
      
      Bootloader version:
      < HCI Command: Intel Read Version (0x3f|0x0005) plen 0
      > HCI Event: Command Complete (0x0e) plen 13
            Intel Read Version (0x3f|0x0005) ncmd 32
              Status: Success (0x00)
              Hardware platform: 0x37
              Hardware variant: 0x11
              Hardware revision: 0.0
              Firmware variant: 0x06
              Firmware revision: 0.1
              Firmware build: 42-52.2015
              Firmware patch: 0
      Signed-off-by: default avatarTedd Ho-Jeong An <tedd.an@intel.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      86a6129a
  2. 17 May, 2017 35 commits