- 28 Sep, 2015 7 commits
-
-
Bob Copeland authored
commit 3633ebeb upstream. We already set a station to be associated when peering completes, both in user space and in the kernel. Thus we should always have an associated sta before sending data frames to that station. Failure to check assoc state can cause crashes in the lower-level driver due to transmitting unicast data frames before driver sta structures (e.g. ampdu state in ath9k) are initialized. This occurred when forwarding in the presence of fixed mesh paths: frames were transmitted to stations with whom we hadn't yet completed peering. Reported-by:
Alexis Green <agreen@cococorp.com> Tested-by:
Jesse Jones <jjones@cococorp.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Vignesh R authored
commit b9e23f32 upstream. Legacy IPs like PWMSS, present under l4per2_7xx_clkdm, cannot support smart-idle when its clock domain is in HW_AUTO on DRA7 SoCs. Hence, program clock domain to SW_WKUP. Signed-off-by:
Vignesh R <vigneshr@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Reviewed-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Max Filippov authored
commit 4229fb12 upstream. Userspace return code may skip restoring THREADPTR register if there are no registers that need to be zeroed. This leads to spurious failures in libc NPTL tests. Always restore THREADPTR on return to userspace. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Ellen Wang authored
commit 29e2d6d1 upstream. Change all occurrences of be16 to le16 in cp2112_xfer(), because SMBUS words are little endian, not big endian. Signed-off-by:
Ellen Wang <ellen@cumulusnetworks.com> Signed-off-by:
Jiri Kosina <jkosina@suse.com> Signed-off-by:
-
Ellen Wang authored
commit 6d00d153 upstream. When doing an I2C_SMBUS_BYTE write (one byte write, no address), the data to be written is in "command" not "data->byte". Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Reviewed-by:
Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by:
-
David Härdeman authored
commit a66b0c41 upstream. The input_dev is already gone when the rc device is being unregistered so checking for its presence only means that no remove uevent will be generated. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Sakari Ailus authored
commit 9d39f054 upstream. Commit 813f5c0a ("media: Change media device link_notify behaviour") modified the media controller link setup notification API and updated the OMAP3 ISP driver accordingly. As a side effect it introduced a bug by turning power on after setting the link instead of before. This results in sub-devices not being powered down in some cases when they should be. Fix it. Fixes: 813f5c0a [media] media: Change media device link_notify behaviour Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 11 Sep, 2015 3 commits
-
-
Jason Wang authored
commit 48900cb6 upstream. virtio declares support for NETIF_F_FRAGLIST, but assumes that there are at most MAX_SKB_FRAGS + 2 fragments which isn't always true with a fraglist. A longer fraglist in the skb will make the call to skb_to_sgvec overflow the sg array, leading to memory corruption. Drop NETIF_F_FRAGLIST so we only get what we can handle. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by:
-
Marcelo Leitner authored
commit 77751427 upstream. Currently we don't check if the new MTU is valid or not and this allows one to configure a smaller than minimum allowed by RFCs or even bigger than interface own MTU, which is a problem as it may lead to packet drops. If you have a daemon like NetworkManager running, this may be exploited by remote attackers by forging RA packets with an invalid MTU, possibly leading to a DoS. (NetworkManager currently only validates for values too small, but not for too big ones.) The fix is just to make sure the new value is valid. That is, between IPV6_MIN_MTU and interface's MTU. Note that similar check is already performed at ndisc_router_discovery(), for when kernel itself parses the RA. Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Luis Henriques authored
Signed-off-by:
-
- 03 Sep, 2015 30 commits
-
-
Amanieu d'Antras authored
commit 3c00cb5e upstream. This function can leak kernel stack data when the user siginfo_t has a positive si_code value. The top 16 bits of si_code descibe which fields in the siginfo_t union are active, but they are treated inconsistently between copy_siginfo_from_user32, copy_siginfo_to_user32 and copy_siginfo_to_user. copy_siginfo_from_user32 is called from rt_sigqueueinfo and rt_tgsigqueueinfo in which the user has full control overthe top 16 bits of si_code. This fixes the following information leaks: x86: 8 bytes leaked when sending a signal from a 32-bit process to itself. This leak grows to 16 bytes if the process uses x32. (si_code = __SI_CHLD) x86: 100 bytes leaked when sending a signal from a 32-bit process to a 64-bit process. (si_code = -1) sparc: 4 bytes leaked when sending a signal from a 32-bit process to a 64-bit process. (si_code = any) parsic and s390 have similar bugs, but they are not vulnerable because rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code to a different process. These bugs are also fixed for consistency. Signed-off-by:
Amanieu d'Antras <amanieu@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Amanieu d'Antras authored
commit 26135022 upstream. This function may copy the si_addr_lsb, si_lower and si_upper fields to user mode when they haven't been initialized, which can leak kernel stack data to user mode. Just checking the value of si_code is insufficient because the same si_code value is shared between multiple signals. This is solved by checking the value of si_signo in addition to si_code. Signed-off-by:
-
Amanieu d'Antras authored
commit 3ead7c52 upstream. This function may copy the si_addr_lsb field to user mode when it hasn't been initialized, which can leak kernel stack data to user mode. Just checking the value of si_code is insufficient because the same si_code value is shared between multiple signals. This is solved by checking the value of si_signo in addition to si_code. Signed-off-by:
-
Marek Marczykowski-Górecki authored
commit 30b03d05 upstream. While gntdev_release() is called the MMU notifier is still registered and can traverse priv->maps list even if no pages are mapped (which is the case -- gntdev_release() is called after all). But gntdev_release() will clear that list, so make sure that only one of those things happens at the same time. Signed-off-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
David Vrabel authored
commit 1401c00e upstream. Unmapping may require sleeping and we unmap while holding priv->lock, so convert it to a mutex. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> [ luis: 3.16 prereq for: 30b03d05 xen/gntdevt: Fix race condition in gntdev_release() ] Signed-off-by:
-
Sebastian Ott authored
commit a313bdc5 upstream. Fix this error when compiling with CONFIG_SMP=n and CONFIG_DYNAMIC_DEBUG=y: drivers/s390/char/sclp_early.c: In function 'sclp_read_info_early': drivers/s390/char/sclp_early.c:87:19: error: 'EBUSY' undeclared (first use in this function) } while (rc == -EBUSY); ^ Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Stephen Powell <zlinuxman@wowway.com> Signed-off-by:
-
huaibin Wang authored
commit d4257295 upstream. When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov <xeb@mail.ru> Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
huaibin Wang <huaibin.wang@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
David Ahern authored
commit ba51b6be upstream. Hit the following splat testing VRF change for ipsec: [ 113.475692] =============================== [ 113.476194] [ INFO: suspicious RCU usage. ] [ 113.476667] 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED Not tainted [ 113.477545] ------------------------------- [ 113.478013] /work/monster-14/dsa/kernel.git/include/linux/rcupdate.h:568 Illegal context switch in RCU read-side critical section! [ 113.479288] [ 113.479288] other info that might help us debug this: [ 113.479288] [ 113.480207] [ 113.480207] rcu_scheduler_active = 1, debug_locks = 1 [ 113.480931] 2 locks held by setkey/6829: [ 113.481371] #0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff814e9887>] pfkey_sendmsg+0xfb/0x213 [ 113.482509] #1: (rcu_read_lock){......}, at: [<ffffffff814e767f>] rcu_read_lock+0x0/0x6e [ 113.483509] [ 113.483509] stack backtrace: [ 113.484041] CPU: 0 PID: 6829 Comm: setkey Not tainted 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED [ 113.485422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 113.486845] 0000000000000001 ffff88001d4c7a98 ffffffff81518af2 ffffffff81086962 [ 113.487732] ffff88001d538480 ffff88001d4c7ac8 ffffffff8107ae75 ffffffff8180a154 [ 113.488628] 0000000000000b30 0000000000000000 00000000000000d0 ffff88001d4c7ad8 [ 113.489525] Call Trace: [ 113.489813] [<ffffffff81518af2>] dump_stack+0x4c/0x65 [ 113.490389] [<ffffffff81086962>] ? console_unlock+0x3d6/0x405 [ 113.491039] [<ffffffff8107ae75>] lockdep_rcu_suspicious+0xfa/0x103 [ 113.491735] [<ffffffff81064032>] rcu_preempt_sleep_check+0x45/0x47 [ 113.492442] [<ffffffff8106404d>] ___might_sleep+0x19/0x1c8 [ 113.493077] [<ffffffff81064268>] __might_sleep+0x6c/0x82 [ 113.493681] [<ffffffff81133190>] cache_alloc_debugcheck_before.isra.50+0x1d/0x24 [ 113.494508] [<ffffffff81134876>] kmem_cache_alloc+0x31/0x18f [ 113.495149] [<ffffffff814012b5>] skb_clone+0x64/0x80 [ 113.495712] [<ffffffff814e6f71>] pfkey_broadcast_one+0x3d/0xff [ 113.496380] [<ffffffff814e7b84>] pfkey_broadcast+0xb5/0x11e [ 113.497024] [<ffffffff814e82d1>] pfkey_register+0x191/0x1b1 [ 113.497653] [<ffffffff814e9770>] pfkey_process+0x162/0x17e [ 113.498274] [<ffffffff814e9895>] pfkey_sendmsg+0x109/0x213 In pfkey_sendmsg the net mutex is taken and then pfkey_broadcast takes the RCU lock. Since pfkey_broadcast takes the RCU lock the allocation argument is pointless since GFP_ATOMIC must be used between the rcu_read_{,un}lock. The one call outside of rcu can be done with GFP_KERNEL. Fixes: 7f6b9dbd ("af_key: locking change") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Peter Zijlstra authored
commit c7999c6f upstream. I ran the perf fuzzer, which triggered some WARN()s which are due to trying to stop/restart an event on the wrong CPU. Use the normal IPI pattern to ensure we run the code on the correct CPU. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: bad7192b ("perf: Fix PERF_EVENT_IOC_PERIOD to force-reset the period") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Marek Lindner authored
commit ef72706a upstream. The tt_local_entry deletion performed in batadv_tt_local_remove() was neither protecting against simultaneous deletes nor checking whether the element was still part of the list before calling hlist_del_rcu(). Replacing the hlist_del_rcu() call with batadv_hash_remove() provides adequate protection via hash spinlocks as well as an is-element-still-in-hash check to avoid 'blind' hash removal. Fixes: 068ee6e2 ("batman-adv: roaming handling mechanism redesign") Reported-by: alfonsname@web.de Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
Marek Lindner authored
commit 354136bc upstream. batadv_softif_vlan_get() may return NULL which has to be verified by the caller. Fixes: 35df3b29 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add") Reported-by:
Ryan Thompson <ryan@eero.com> Signed-off-by:
-
Marc Zyngier authored
commit 126c69a0 upstream. When injecting a fault into a misbehaving 32bit guest, it seems rather idiotic to also inject a 64bit fault that is only going to corrupt the guest state. This leads to a situation where we perform an illegal exception return at EL2 causing the host to crash instead of killing the guest. Just fix the stupid bug that has been there from day 1. Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Tested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Guillermo A. Amaral authored
commit 7a7184b0 upstream. The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by:
Guillermo A. Amaral <g@maral.me> Signed-off-by:
Tejun Heo <tj@kernel.org> [ luis: backported to 3.16: - dropped ATA_HORKAGE_ZERO_AFTER_TRIM flag - adjusted context ] Signed-off-by:
-
Takashi Iwai authored
commit 9003ebb1 upstream. The fix for deadlock in PM in commit [1ee23fe0: ALSA: usb-audio: Fix deadlocks at resuming] introduced a new check of in_pm flag. However, the brainless patch author evaluated it in a wrong way (logical AND instead of logical OR), thus usb_autopm_get_interface() is wrongly called at probing, leading to unbalance of runtime PM refcount. This patch fixes it by correcting the logic. Reported-by:
Hans Yang <hansy@nvidia.com> Fixes: 1ee23fe0 ('ALSA: usb-audio: Fix deadlocks at resuming') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alan Stern authored
commit 49718f0f upstream. The routines in scsi_rpm.c assume that if a runtime-PM callback is invoked for a SCSI device, it can only mean that the device's driver has asked the block layer to handle the runtime power management (by calling blk_pm_runtime_init(), which among other things sets q->dev). However, this assumption turns out to be wrong for things like the ses driver. Normally ses devices are not allowed to do runtime PM, but userspace can override this setting. If this happens, the kernel gets a NULL pointer dereference when blk_post_runtime_resume() tries to use the uninitialized q->dev pointer. This patch fixes the problem by calling the block layer's runtime-PM routines only if the device's driver really does have a runtime-PM callback routine. Since ses doesn't define any such callbacks, the crash won't occur. This fixes Bugzilla #101371. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Stanisław Pitucha <viraptor@gmail.com> Reported-by:
Ilan Cohen <ilanco@gmail.com> Tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Andy Lutomirski authored
commit 12e244f4 upstream. The previous fix confused a selector with a segment prefix. Fix it. Compile-tested only. Cc: Juergen Gross <jgross@suse.com> Reported-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Markos Chandras authored
commit 9f161439 upstream. Commit 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)") fixed indirect system calls on O32 but it also introduced a bug for MIPS64 where it erroneously modified the v0 (syscall) register with the assumption that the sycall offset hasn't been taken into consideration. This breaks seccomp on MIPS64 n64 and n32 ABIs. We fix this by replacing the addition with a move instruction. Fixes: 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)") Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10951/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Manfred Spraul authored
commit 3ed1f8a9 upstream. sem_lock() did not properly pair memory barriers: !spin_is_locked() and spin_unlock_wait() are both only control barriers. The code needs an acquire barrier, otherwise the cpu might perform read operations before the lock test. As no primitive exists inside <include/spinlock.h> and since it seems noone wants another primitive, the code creates a local primitive within ipc/sem.c. With regards to -stable: The change of sem_wait_array() is a bugfix, the change to sem_lock() is a nop (just a preprocessor redefinition to improve the readability). The bugfix is necessary for all kernels that use sem_wait_array() (i.e.: starting from 3.10). Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Reported-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
-
Manfred Spraul authored
commit 2e094abf upstream. When I fixed bugs in the sem_lock() logic, I was more conservative than necessary. Therefore it is safe to replace the smp_mb() with smp_rmb(). And: With smp_rmb(), semop() syscalls are up to 10% faster. The race we must protect against is: sem->lock is free sma->complex_count = 0 sma->sem_perm.lock held by thread B thread A: A: spin_lock(&sem->lock) B: sma->complex_count++; (now 1) B: spin_unlock(&sma->sem_perm.lock); A: spin_is_locked(&sma->sem_perm.lock); A: XXXXX memory barrier A: if (sma->complex_count == 0) Thread A must read the increased complex_count value, i.e. the read must not be reordered with the read of sem_perm.lock done by spin_is_locked(). Since it's about ordering of reads, smp_rmb() is sufficient. [akpm@linux-foundation.org: update sem_lock() comment, from Davidlohr] Signed-off-by:
Davidlohr Bueso <dave@stgolabs.net> Acked-by:
Rafael Aquini <aquini@redhat.com> Signed-off-by:
-
Herton R. Krzesinski authored
commit 602b8593 upstream. The current semaphore code allows a potential use after free: in exit_sem we may free the task's sem_undo_list while there is still another task looping through the same semaphore set and cleaning the sem_undo list at freeary function (the task called IPC_RMID for the same semaphore set). For example, with a test program [1] running which keeps forking a lot of processes (which then do a semop call with SEM_UNDO flag), and with the parent right after removing the semaphore set with IPC_RMID, and a kernel built with CONFIG_SLAB, CONFIG_SLAB_DEBUG and CONFIG_DEBUG_SPINLOCK, you can easily see something like the following in the kernel log: Slab corruption (Not tainted): kmalloc-64 start=ffff88003b45c1c0, len=64 000: 6b 6b 6b 6b 6b 6b 6b 6b 00 6b 6b 6b 6b 6b 6b 6b kkkkkkkk.kkkkkkk 010: ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ Prev obj: start=ffff88003b45c180, len=64 000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ 010: ff ff ff ff ff ff ff ff c0 fb 01 37 00 88 ff ff ...........7.... Next obj: start=ffff88003b45c200, len=64 000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ 010: ff ff ff ff ff ff ff ff 68 29 a7 3c 00 88 ff ff ........h).<.... BUG: spinlock wrong CPU on CPU#2, test/18028 general protection fault: 0000 [#1] SMP Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib] CPU: 2 PID: 18028 Comm: test Not tainted 4.2.0-rc5+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 RIP: spin_dump+0x53/0xc0 Call Trace: spin_bug+0x30/0x40 do_raw_spin_unlock+0x71/0xa0 _raw_spin_unlock+0xe/0x10 freeary+0x82/0x2a0 ? _raw_spin_lock+0xe/0x10 semctl_down.clone.0+0xce/0x160 ? __do_page_fault+0x19a/0x430 ? __audit_syscall_entry+0xa8/0x100 SyS_semctl+0x236/0x2c0 ? syscall_trace_leave+0xde/0x130 entry_SYSCALL_64_fastpath+0x12/0x71 Code: 8b 80 88 03 00 00 48 8d 88 60 05 00 00 48 c7 c7 a0 2c a4 81 31 c0 65 8b 15 eb 40 f3 7e e8 08 31 68 00 4d 85 e4 44 8b 4b 08 74 5e <45> 8b 84 24 88 03 00 00 49 8d 8c 24 60 05 00 00 8b 53 04 48 89 RIP [<ffffffff810d6053>] spin_dump+0x53/0xc0 RSP <ffff88003750fd68> ---[ end trace 783ebb76612867a0 ]--- NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [test:18053] Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib] CPU: 3 PID: 18053 Comm: test Tainted: G D 4.2.0-rc5+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 RIP: native_read_tsc+0x0/0x20 Call Trace: ? delay_tsc+0x40/0x70 __delay+0xf/0x20 do_raw_spin_lock+0x96/0x140 _raw_spin_lock+0xe/0x10 sem_lock_and_putref+0x11/0x70 SYSC_semtimedop+0x7bf/0x960 ? handle_mm_fault+0xbf6/0x1880 ? dequeue_task_fair+0x79/0x4a0 ? __do_page_fault+0x19a/0x430 ? kfree_debugcheck+0x16/0x40 ? __do_page_fault+0x19a/0x430 ? __audit_syscall_entry+0xa8/0x100 ? do_audit_syscall_entry+0x66/0x70 ? syscall_trace_enter_phase1+0x139/0x160 SyS_semtimedop+0xe/0x10 SyS_semop+0x10/0x20 entry_SYSCALL_64_fastpath+0x12/0x71 Code: 47 10 83 e8 01 85 c0 89 47 10 75 08 65 48 89 3d 1f 74 ff 7e c9 c3 0f 1f 44 00 00 55 48 89 e5 e8 87 17 04 00 66 90 c9 c3 0f 1f 00 <55> 48 89 e5 0f 31 89 c1 48 89 d0 48 c1 e0 20 89 c9 48 09 c8 c9 Kernel panic - not syncing: softlockup: hung tasks I wasn't able to trigger any badness on a recent kernel without the proper config debugs enabled, however I have softlockup reports on some kernel versions, in the semaphore code, which are similar as above (the scenario is seen on some servers running IBM DB2 which uses semaphore syscalls). The patch here fixes the race against freeary, by acquiring or waiting on the sem_undo_list lock as necessary (exit_sem can race with freeary, while freeary sets un->semid to -1 and removes the same sem_undo from list_proc or when it removes the last sem_undo). After the patch I'm unable to reproduce the problem using the test case [1]. [1] Test case used below: #include <stdio.h> #include <sys/types.h> #include <sys/ipc.h> #include <sys/sem.h> #include <sys/wait.h> #include <stdlib.h> #include <time.h> #include <unistd.h> #include <errno.h> #define NSEM 1 #define NSET 5 int sid[NSET]; void thread() { struct sembuf op; int s; uid_t pid = getuid(); s = rand() % NSET; op.sem_num = pid % NSEM; op.sem_op = 1; op.sem_flg = SEM_UNDO; semop(sid[s], &op, 1); exit(EXIT_SUCCESS); } void create_set() { int i, j; pid_t p; union { int val; struct semid_ds *buf; unsigned short int *array; struct seminfo *__buf; } un; /* Create and initialize semaphore set */ for (i = 0; i < NSET; i++) { sid[i] = semget(IPC_PRIVATE , NSEM, 0644 | IPC_CREAT); if (sid[i] < 0) { perror("semget"); exit(EXIT_FAILURE); } } un.val = 0; for (i = 0; i < NSET; i++) { for (j = 0; j < NSEM; j++) { if (semctl(sid[i], j, SETVAL, un) < 0) perror("semctl"); } } /* Launch threads that operate on semaphore set */ for (i = 0; i < NSEM * NSET * NSET; i++) { p = fork(); if (p < 0) perror("fork"); if (p == 0) thread(); } /* Free semaphore set */ for (i = 0; i < NSET; i++) { if (semctl(sid[i], NSEM, IPC_RMID)) perror("IPC_RMID"); } /* Wait for forked processes to exit */ while (wait(NULL)) { if (errno == ECHILD) break; }; } int main(int argc, char **argv) { pid_t p; srand(time(NULL)); while (1) { p = fork(); if (p < 0) { perror("fork"); exit(EXIT_FAILURE); } if (p == 0) { create_set(); goto end; } /* Wait for forked processes to exit */ while (wait(NULL)) { if (errno == ECHILD) break; }; } end: return 0; } [akpm@linux-foundation.org: use normal comment layout] Signed-off-by:
Herton R. Krzesinski <herton@redhat.com> Acked-by:
-
Wanpeng Li authored
commit 4f32be67 upstream. After trying to drain pages from pagevec/pageset, we try to get reference count of the page again, however, the reference count of the page is not reduced if the page is still not on LRU list. Fix it by adding the put_page() to drop the page reference which is from __get_any_page(). Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 3e04e2fe upstream. This addresses two issues that cause problems with viewperf maya-03 in situation with memory pressure. The first issue causes attempts to unreserve buffers if batched reservation fails due to, for example, a signal pending. While previously the ttm_eu api was resistant against this type of error, it is no longer and the lockdep code will complain about attempting to unreserve buffers that are not reserved. The issue is resolved by avoid calling ttm_eu_backoff_reservation in the buffer reserve error path. The second issue is that the binding_mutex may be held when user-space fence objects are created and hence during memory reclaims. This may cause recursive attempts to grab the binding mutex. The issue is resolved by not holding the binding mutex across fence creation and submission. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Horia Geant? authored
commit b310c178 upstream. When doing pointer operation for accessing the HW S/G table, a value representing number of entries (and not number of bytes) must be used. Fixes: 045e3678 ("crypto: caam - ahash hmac support") Signed-off-by:
Horia Geant? <horia.geanta@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Michael Walle authored
commit 5c16179b upstream. The commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by:
Michael Walle <michael@walle.cc> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.ccSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Bart Van Assche authored
commit 8f2777f5 upstream. Since fc_fcp_cleanup_cmd() can sleep this function must not be called while holding a spinlock. This patch avoids that fc_fcp_cleanup_each_cmd() triggers the following bug: BUG: scheduling while atomic: sg_reset/1512/0x00000202 1 lock held by sg_reset/1512: #0: (&(&fsp->scsi_pkt_lock)->rlock){+.-...}, at: [<ffffffffc0225cd5>] fc_fcp_cleanup_each_cmd.isra.21+0xa5/0x150 [libfc] Preemption disabled at:[<ffffffffc0225cd5>] fc_fcp_cleanup_each_cmd.isra.21+0xa5/0x150 [libfc] Call Trace: [<ffffffff816c612c>] dump_stack+0x4f/0x7b [<ffffffff810828bc>] __schedule_bug+0x6c/0xd0 [<ffffffff816c87aa>] __schedule+0x71a/0xa10 [<ffffffff816c8ad2>] schedule+0x32/0x80 [<ffffffffc0217eac>] fc_seq_set_resp+0xac/0x100 [libfc] [<ffffffffc0218b11>] fc_exch_done+0x41/0x60 [libfc] [<ffffffffc0225cff>] fc_fcp_cleanup_each_cmd.isra.21+0xcf/0x150 [libfc] [<ffffffffc0225f43>] fc_eh_device_reset+0x1c3/0x270 [libfc] [<ffffffff814a2cc9>] scsi_try_bus_device_reset+0x29/0x60 [<ffffffff814a3908>] scsi_ioctl_reset+0x258/0x2d0 [<ffffffff814a2650>] scsi_ioctl+0x150/0x440 [<ffffffff814b3a9d>] sd_ioctl+0xad/0x120 [<ffffffff8132f266>] blkdev_ioctl+0x1b6/0x810 [<ffffffff811da608>] block_ioctl+0x38/0x40 [<ffffffff811b4e08>] do_vfs_ioctl+0x2f8/0x530 [<ffffffff811b50c1>] SyS_ioctl+0x81/0xa0 [<ffffffff816cf8b2>] system_call_fastpath+0x16/0x7a Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
-
Bart Van Assche authored
commit f6979ade upstream. Due to patch "libfc: Do not invoke the response handler after fc_exch_done()" (commit ID 7030fd62) the lport_recv() call in fc_exch_recv_req() is passed a dangling pointer. Avoid this by moving the fc_frame_free() call from fc_invoke_resp() to its callers. This patch fixes the following crash: general protection fault: 0000 [#3] PREEMPT SMP RIP: fc_lport_recv_req+0x72/0x280 [libfc] Call Trace: fc_exch_recv+0x642/0xde0 [libfc] fcoe_percpu_receive_thread+0x46a/0x5ed [fcoe] kthread+0x10a/0x120 ret_from_fork+0x42/0x70 Signed-off-by:
-
John Soni Jose authored
commit 660d0831 upstream. In case of hw iscsi offload, an host can have N-number of active connections. There can be IO's running on some connections which make host->host_busy always TRUE. Now if logout from a connection is tried then the code gets into an infinite loop as host->host_busy is always TRUE. iscsi_conn_teardown(....) { ......... /* * Block until all in-progress commands for this connection * time out or fail. */ for (;;) { spin_lock_irqsave(session->host->host_lock, flags); if (!atomic_read(&session->host->host_busy)) { /* OK for ERL == 0 */ spin_unlock_irqrestore(session->host->host_lock, flags); break; } spin_unlock_irqrestore(session->host->host_lock, flags); msleep_interruptible(500); iscsi_conn_printk(KERN_INFO, conn, "iscsi conn_destroy(): " "host_busy %d host_failed %d\n", atomic_read(&session->host->host_busy), session->host->host_failed); ................ ............... } } This is not an issue with software-iscsi/iser as each cxn is a separate host. Fix: Acquiring eh_mutex in iscsi_conn_teardown() before setting session->state = ISCSI_STATE_TERMINATE. Signed-off-by:
John Soni Jose <sony.john@avagotech.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Reviewed-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit e037239e upstream. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Joe Thornber authored
commit b0dc3c8b upstream. When using nested btrees, the top leaves of the top levels contain block addresses for the root of the next tree down. If we shadow a shared leaf node the leaf values (sub tree roots) should be incremented accordingly. This is only an issue if there is metadata sharing in the top levels. Which only occurs if metadata snapshots are being used (as is possible with dm-thinp). And could result in a block from the thinp metadata snap being reused early, thus corrupting the thinp metadata snap. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [ luis: backported to 3.16: - dropped changes to remove_one() as suggested by Mike Snitzer ] Signed-off-by:
-
Joe Thornber authored
commit 7f518ad0 upstream. The device details and mapping trees were just being decremented before. Now btree_del() is called to do a deep delete. Signed-off-by:
-
