- 08 Dec, 2023 9 commits
-
-
Neil Armstrong authored
Now interconnect dependent devices are added in sm8650 DTSI, now enable more devices for the Qualcomm SM8650 MTP board: - PCIe - Display - DSPs - SDCard - UFS - USB role switch with PMIC Glink Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-7-b25fb781da52@linaro.orgSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Neil Armstrong authored
Add Hardware nodes that depends on an interconnect property to be valid. The includes: - all QUP i2s/spi nodes - PCIe - UFS - SDHCI - Display - HWMON Acked-by:
-
Neil Armstrong authored
Add initial QRD (Qualcomm Reference Device) DT, it supports boot to shell with buttons, leds and USB peripheral. Reviewed-by:
-
Neil Armstrong authored
Add initial QRD (Qualcomm Reference Device) DT, only boots to shell with USB device support. Reviewed-by:
-
Neil Armstrong authored
The pm8550ve can be found with a different SID on SM8650 platforms, make it configurable. Reviewed-by:
-
Neil Armstrong authored
Add initial DTSI for the Qualcomm SM8650 platform, only contains nodes which doesn't depend on interconnect. Reviewed-by:
-
Neil Armstrong authored
Document the SM8650 SoC and based MTP (Mobile Test Platforms) and QRD (Qualcomm Reference Device) boards. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
Merge branch 'icc-sm8650' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.8 Merge the SM8650 interconnect binding, to gain access to the interconnect port constants.
-
Bjorn Andersson authored
Merge branch '20231106-topic-sm8650-upstream-clocks-v3-5-761a6fadb4c0@linaro.org' into arm64-for-6.8 Merge the SM8650 clock bindings, to gain access to the clock constants.
-
- 07 Dec, 2023 31 commits
-
-
Luka Panio authored
Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc. Signed-off-by:
Luka Panio <lukapanio@gmail.com> Acked-by:
-
Luka Panio authored
Add a compatible for Xiaomi Pad 6. Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Alex Elder authored
Enable IPA on the SM8550 QRD. The GSI firmware on this platform is loaded by the AP. Signed-off-by:
Alex Elder <elder@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20231124181718.915208-3-elder@linaro.orgSigned-off-by:
-
Alex Elder authored
Add IPA-related nodes and definitions to "sm8550.dtsi", which uses IPA v5.5. Signed-off-by:
-
Sibi Sankar authored
Extend pattern matching to support the X1E platform name. Signed-off-by:
Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by:
-
Krzysztof Kozlowski authored
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by:
-
Robert Marko authored
Add node to support the QUP4 SPI controller inside of IPQ8074. Some devices use this bus to communicate to a Bluetooth controller. Signed-off-by:
Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20231123121324.1046164-1-robimarko@gmail.comSigned-off-by:
-
Imran Shaik authored
Add device node for ECPRI clock controller on qcom QDU1000 and QRU1000 SoCs. Signed-off-by:
Imran Shaik <quic_imrashai@quicinc.com> Reviewed-by:
-
Johan Hovold authored
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Note that only triggering on rising edges can be used to detect resume events but not disconnect events. Fixes: 7f7e5c1b ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes") Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20231120164331.8116-12-johan+linaro@kernel.orgSigned-off-by:
-
Johan Hovold authored
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 0c9dde0d ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") Fixes: b33d2868 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes") Cc: stable@vger.kernel.org # 5.10 Cc: Jonathan Marek <jonathan@marek.ca> Cc: Jack Pham <quic_jackp@quicinc.com> Signed-off-by:
Jack Pham <quic_jackp@quicinc.com> Link: https://lore.kernel.org/r/20231120164331.8116-11-johan+linaro@kernel.orgSigned-off-by:
-
Johan Hovold authored
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 59d34ca9 ("arm64: dts: qcom: Add initial device tree for SM6375") Cc: stable@vger.kernel.org # 6.2 Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
-
Johan Hovold authored
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: ca4db2b5 ("arm64: dts: qcom: sdm845: Add USB-related nodes") Cc: stable@vger.kernel.org # 4.20 Signed-off-by:
-
Johan Hovold authored
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 07c8ded6 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees") Cc: stable@vger.kernel.org # 6.2 Cc: Richard Acayan <mailingradian@gmail.com> Signed-off-by:
Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20231120164331.8116-8-johan+linaro@kernel.orgSigned-off-by:
-
Johan Hovold authored
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: b080f53a ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes") Cc: stable@vger.kernel.org # 6.5 Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Johan Hovold authored
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Note that only triggering on rising edges can be used to detect resume events but not disconnect events. Fixes: bb9efa59 ("arm64: dts: qcom: sc7280: Add USB related nodes") Signed-off-by:
-
Johan Hovold authored
A recent cleanup reordering the usb_1 wakeup interrupts inadvertently switched the DP and SuperSpeed interrupt trigger types. Fixes: 4a7ffc10 ("arm64: dts: qcom: align DWC3 USB interrupts with DT schema") Cc: stable@vger.kernel.org # 5.19 Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Johan Hovold authored
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 0b766e7f ("arm64: dts: qcom: sc7180: Add USB related nodes") Cc: stable@vger.kernel.org # 5.10 Signed-off-by:
-
Johan Hovold authored
The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Note that only triggering on rising edges can be used to detect resume events but not disconnect events. Fixes: de100152 ("arm64: dts: qcom: sa8775p: add USB nodes") Cc: Shazad Hussain <quic_shazhuss@quicinc.com> Signed-off-by:
Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20231120164331.8116-3-johan+linaro@kernel.orgSigned-off-by:
-
Nikita Travkin authored
Longcheer L8150 doesn't have any dedicated fuel-gauge or charger, instead making use of the pmic hardware blocks for those purposes. Add pm8916 bms and charger, as well as the battery cell description that those blocks rely on. Reviewed-by:
Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20231120-pm8916-dtsi-bms-lbc-v4-3-4f91056c8252@trvn.ruSigned-off-by:
-
Nikita Travkin authored
pm8916 contains some hardware blocks for battery powered devices: - VM-BMS: Battery voltage monitoring block. - LBC: Linear battery charger. Add them to the pmic dtsi so the devices that make use of those blocks can enable them. Signed-off-by:
-
Konrad Dybcio authored
A643 (A635 speedbin 0xac) tops out at 812 MHz. Fill in the opp-supported-hw appropriately. Note that fuseval 0xac is referred to as speedbin 1 downstream, but that was already in use upstream, so 2 was chosen instead. Signed-off-by:
-
Konrad Dybcio authored
The SMMUs on sc7280 are cache-coherent. APPS_SMMU is marked as such, mark the GPU one as well. Fixes: 96c47197 ("arm64: dts: qcom: sc7280: Add gpu support") Reviewed-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by:
-
Konrad Dybcio authored
GPU_SMMU SID 1 is meant for Adreno LPAC (Low Priority Async Compute). On platforms that support it (in firmware), it is necessary to describe that link, or Adreno register access will hang the board. The current settings are functionally identical, *but* due to what is likely hardcoded security policies, the secure firmware rejects them, resulting in the board hanging. To avoid that, alter the settings such that SID 0 and 1 are described separately. Fixes: 96c47197 ("arm64: dts: qcom: sc7280: Add gpu support") Signed-off-by:
-
Konrad Dybcio authored
Non-Chrome SC7280-family platforms ship a ZAP shader with the Adreno GPU. Describe that and make sure it doesn't interfere with Chrome devices. Signed-off-by:
-
Krzysztof Kozlowski authored
Add missing QDU, QRU and SDA platform names to the pattern matching all Qualcomm compatibles. Signed-off-by:
-
Rohit Agarwal authored
Enable the support for USB3 controller, QMP PHY and HS PHY on SDX75 IDP. Signed-off-by:
Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231117080737.606687-4-quic_rohiagar@quicinc.comSigned-off-by:
-
Rohit Agarwal authored
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and HS PHY on SDX75. Signed-off-by:
-
Rohit Agarwal authored
Add interconnect nodes to support interconnects on SDX75. Also parallely add the interconnect property for UART required so that the bootup to shell does not break with interconnects in place. Signed-off-by:
-
Nia Espera authored
In a similar vein to https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/, the remote processors on sm8350 fail to initialize with the 'correct' (i.e., specified in downstream) IRQ type. Change this to EDGE_RISING. Signed-off-by:
Nia Espera <nespera@igalia.com> Acked-by:
-
Nia Espera authored
pmk8350 has a random tab character inserted, so remove it. Reviewed-by:
-
Nia Espera authored
DMA0 node downstream is specified at 0x900000, so fix the typo. Without this, enabling any i2c node using DMA0 causes a hang. Fixes: bc08fbf4 ("arm64: dts: qcom: sm8350: Define GPI DMA engines") Fixes: 41d6bca7 ("arm64: dts: qcom: sm8350: correct DMA controller unit address") Reviewed-by:
-
