- 23 Sep, 2009 40 commits
-
-
Florian Tobias Schandinat authored
Remove unneeeded declarations from the header and makes it more maintainable by evaluating the array size in the file the array exist in and exporting it via variables. This removes the need to keep the array size in the header in sync with the real array size. Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Harald Welte <laforge@gnumonks.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Florian Tobias Schandinat authored
Correct the returned error code for remapping the video framebuffer. Introduce error handling for remapping MMIO register address space to avoid a NULL pointer dereference. Disable hardware acceleration if remapping MMIO register address space failed as those registers are only used for hardware acceleration. Signed-off-by:
-
Florian Tobias Schandinat authored
Move individual start address setting to viafb_set_primary_address and viafb_set_secondary_address and make it more flexible to reuse it for panning. Using central functions makes it easier to follow HW manipulations. Remove crt locking as it should be only needed for timing manipulation. Move iga_path manipulation to via_pci_probe. Remove memset for screen cleaning as it is currently done only for the second screen. This is not needed for normal operation but has a little chance of causing unwanted display artifacts. This can be fixed later more consistent and more efficient (using viafb_fillrect) if needed. This is a code clenup, no notable runtime changes expected. Signed-off-by:
-
Florian Tobias Schandinat authored
Shrink and merge viafb_update_viafb_par. This removes a lot of duplicated data in viafb_par. Use the relevant data of fb_info instead. On the way it removes an inconsistency in handling a second framebuffer which only worked because viafbinfo1->par is modified to point to the same viafb_par as viafbinfo->par. Code cleanup only, no runtime change expected. Signed-off-by:
-
Florian Tobias Schandinat authored
Currently the start address is set to an initial value every time viafb_setmode is called. This is not done consistently along graphic cores and not even the whole address but often only parts of it. On top of that it seems useless as the real/final address will be set by viafb_set_start_addr a few lines later. Remove this superfluous initalization to shrink register initalization and as a start to decouple primary and secondary display. Code cleanup, no notable runtime change expected. Signed-off-by:
-
Florian Tobias Schandinat authored
The current code initializes the register for CX700 chips 2 times due to a missing break as discovered by Harald Welte. As CX700 and VX800 have exactly the same register initialization we can use one for both to avoid duplicated code. As this is a pure code cleanup no measurable runtime effects are expected. Signed-off-by:
-
Ryan Mallon authored
EP93xx video driver plus documentation. Signed-off-by:
Ryan Mallon <ryan@bluewatersys.com> Acked-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Daniele Venzano <linux@brownhat.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Ryan Mallon authored
Signed-off-by:
-
Roel Kluin authored
If called with mode_idx = 1, rate = 68, a read occurs from sisfb_vrate[-1].refresh. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
-
Sudhakar Rajashekhara authored
Since the previous version, return values in ioctl() function have been modified. [akpm@linux-foundation.org: simplify lcd_disable_raster()] Signed-off-by:
Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by:
Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by:
Steve Chen <schen@mvista.com> Acked-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Sudhakar Rajashekhara authored
Add LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture. LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a. LCDC on DA8xx consists of two independent controllers, the Raster Controller and the LCD Interface Display Driver (LIDD) controller. LIDD further supports character and graphic displays. This patch adds support for the graphic display (Sharp LQ035Q3DG01) found on the DA830 based EVM. The EVM details can be found at: http://support.spectrumdigital.com/boards/dskda830/revc/. Signed-off-by:
-
Roel Kluin authored
Since `+' has a higher precedence than the trinary operator `?', this added `hres * (1 << color_mode)' to the boolean testing videomode and depth. Signed-off-by:
-
Pavel Machek authored
Add a framebuffer driver for Qualcomm MSM/QSD SoCs, tested on HTC Dream smartphone (aka T-Mobile G1, aka ADP1). Brian said: I did the original quick and dirty version for bringup. Rebecca took over and (re)wrote the bulk of the driver, getting things stable for production ship of Dream and Sapphire, and Dima is currently adding support for later Qualcomm chipsets (QSD8x50, etc). Signed-off-by:
Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Rebecca Schultz Zavin <rebecca@android.com> Cc: Dima Zavin <dima@android.com> Signed-off-by:
-
Ville Syrjala authored
Fix a bunch of coding style problems in atyfb_base.c. Signed-off-by:
Ville Syrjala <syrjala@sci.fi> Cc: "H Hartley Sweeten" <hartleys@visionengravers.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Imre Deak authored
Fixes the following: warning: assignment discards qualifiers from pointer target type Signed-off-by:
Imre Deak <imre.deak@nokia.com> Acked-by:
-
Imre Deak authored
Also move the controller specific options up in the menu, to a more logical spot. Signed-off-by:
-
arun c authored
- use __iomem type attribute where appropriate - expand (a ? : b) to (a ? a : b) As suggested by Russel King <linux@arm.linux.org.uk> - remove a dead line from omapfb_main.c Signed-off-by:
Arun C <arunedarath@mistralsolutions.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Jouni Hogander authored
Check wether fbdev is NULL in suspend / resume functions. Fbdev is NULL, if there is no lcd or it is not enabled in configuration. Signed-off-by:
Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by:
-
Daniel Stone authored
Previously, the only external (to dispc.c) IRQ handler was RFBI's frame done handler. dispc's IRQ framework was very dumb: you could only have one handler, and the semantics of {request,free}_irq were odd, to say the least. The new framework allows multiple consumers to register arbitrary IRQ masks. Signed-off-by:Daniel Stone <daniel.stone@nokia.com> Signed-off-by:
-
Jouni Hogander authored
Without wakeup enable omap doesn't wake up on dispc interrupts. This causes problems in a case where mpu is in sleep state and dispc interrupt fires. Signed-off-by:
-
Jouni Hogander authored
Leaving interface clocks enabled causes dss pwrdm to stay in active state when mpu is in active state. This fix puts dss to sleep state when it is not needed. Earlier version broke framebuffer on 24xx. This is fixed by enabling clocks before trying to access DISPC_IRQSTATUS register. Signed-off-by:
-
Imre Deak authored
- value and register offset was swapped in a dispc write - DISPC_CONTROL register was used instead of DISPC_SYSCONFIG - FIFO size bit field had incorrect length for OMAP3 Fixed-by:
Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Fixed-by:
Andrzej Zaborowski <balrog@zabor.org> Signed-off-by:
-
Imre Deak authored
Signed-off-by:
-
Rodrigo Vivi authored
The LCD controller (EPSON S1D13744) supports rotation (0, 90, 180 and 270 degrees) on hardware just setting the bits 0 and 1 of 0x28 register (LCD Panel Configuration Register). Now it is possible to use this caps only setting the angle degree on var rotate of fb_var_screeninfo using the FBIOPUT_VSCREENINFO ioctl. Fixed-by:
Siarhei Siamashka <siarhei.siamashka@nokia.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@openbossa.org> Signed-off-by:
-
Stanley.Miao authored
Add glue to control the OMAP_LDP LCD as a frame buffer device using the existing dispc.c driver under omapfb. Patch updated for mainline kernel. Note that the drivers/video/omap should be updated to pass omap_lcd_config in platform_data. The patch should also be updated to compile if twl4030 is not selected, and eventually to use the regulator framework. Fixed-by:
Jarkko Nikula <jarkko.nikula@gmail.com> Fixed-by:
Stanley.Miao <stanley.miao@windriver.com> Signed-off-by:
-
Steve Sakoman authored
Signed-off-by:
Steve Sakoman <steve@sakoman.com> Signed-off-by:
-
Koen Kooi authored
The default resolution is 1024x768@24bit This version addresses the comments from Felipe Balbi adn Arun Edarath Fixed-by:
Felipe Contreras <felipe.contreras@gmail.com> Fixed-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Koen Kooi <koen@openembedded.org> Signed-off-by:
-
Steve Sakoman authored
Add LCD support for OMAP3 EVM Backlight support by Arun C <arunedarath@mistralsolutions.com> Fixed-by:
Syed Mohammed Khasim <khasim@ti.com> Signed-off-by:
-
Kevin Hilman authored
The 3430SDP uses the same panel as the 2430SDP. The main difference are in the GPIO lines used for panel enable and backlight, and the VAUX register/commands sent to the TWL4030 power subsystem. Also, some misc. whitespace cleanups. Fixed-by:
Kevin Hilman <khilman@mvsita.com> Signed-off-by:
-
arun c authored
omap2evm LCD supports VGA and QVGA resolution, by default its in VGA mode. Fixed-by:
-
Hunyue Yau authored
Add glue to control the 2430SDP LCD as a frame buffer device using the existing dispc.c driver under omapfb. Fixed-by:
Kevin Hilman <khilman@mvista.com> Fixed-by:
Sergio Aguirre <saaguirre@ti.com> Fixed-by:
Francisco Alecrim <francisco.alecrim@indt.org.br> Fixed-by:
Hunyue Yau <hyau@mvista.com> Signed-off-by:
-
Jonathan McDowell authored
This is an updated version of the LCD driver for the Amstrad Delta to take into account the recent changes to the omapfb infrastructure. The Delta features a 480x320 12 bit DSTN panel. Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
-
Imre Deak authored
Fixed-by:
Mike Wege <ext-mike.wege@nokia.com> Fixed-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Fixed-by:
Timo Savola <tsavola@movial.fi> Fixed-by:
Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Fixed-by:
Trilok Soni <soni.trilok@gmail.com> Signed-off-by:
Imre Deak <imre.deak@solidboot.com> Signed-off-by:
Juha Yrjola <juha.yrjola@solidboot.com> Acked-by:
-
Kyungmin Park authored
Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Daniel Glöckner authored
Many gpio chips allow to generate interrupts when the value of a pin changes. This patch gives usermode application the opportunity to make use of this feature by calling poll(2) on the /sys/class/gpio/gpioN/value sysfs file. The edge to trigger can be set in the edge file in the same directory. Possible values are "none", "rising", "falling", and "both". Using level triggers is not possible with current sysfs since nothing changes the GPIO value (and the IRQ keeps triggering). Edge triggering will "just work". Note that if there was an event between read() and poll(), the poll() returns immediately. Also note that this version only supports true GPIO interrupts. Some later patch might be able to synthesize this behavior by timer-driven polling; some systems seem to need that. [dbrownell@users.sourceforge.net: align ids to 16 bit ids; whitespace] Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
-
H Hartley Sweeten authored
Drivers should be including <linux/gpio.h> not <asm/gpio.h>. Signed-off-by:
-
Alek Du authored
MAX7315 is pin and software compatible with PCA9534, so add it to the I2C device ID table of pca953x driver. http://www.datasheetcatalog.org/datasheet/maxim/MAX7315.pdfSigned-off-by:
Alek Du <alek.du@intel.com> Acked-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
-
Alek Du authored
The Langwell chip is the IO hub for Intel Moorestown platform which has a 64-pin gpio block device inside. It is exposed as a dedicated PCI device. We use it to control outside peripheral as well as to do IRQ demuxing. The gpio block uses MSI to send level type interrupt to IOAPIC. Signed-off-by:
-
Marek Vasut authored
Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by:
-
