- 21 Aug, 2020 40 commits
-
-
Peilin Ye authored
commit 629b49c8 upstream. Check `num_rsp` before using it as for-loop counter. Add `unlock` label. Cc: stable@vger.kernel.org Signed-off-by:
Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peilin Ye authored
commit 75bbd2ea upstream. Check `num_rsp` before using it as for-loop counter. Cc: stable@vger.kernel.org Signed-off-by:
-
Peilin Ye authored
commit 51c19bf3 upstream. Check upon `num_rsp` is insufficient. A malformed event packet with a large `num_rsp` number makes hci_extended_inquiry_result_evt() go out of bounds. Fix it. This patch fixes the following syzbot bug: https://syzkaller.appspot.com/bug?id=4bf11aa05c4ca51ce0df86e500fce486552dc8d2 Reported-by: syzbot+d8489a79b781849b9c46@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 80982c7e upstream. Some ioctls via OSS sequencer API may race and lead to UAF when the port create and delete are performed concurrently, as spotted by a couple of syzkaller cases. This patch is an attempt to address it by serializing the ioctls with the existing register_mutex. Basically OSS sequencer API is an obsoleted interface and was designed without much consideration of the concurrency. There are very few applications with it, and the concurrent performance isn't asked, hence this "big hammer" approach should be good enough. Reported-by: syzbot+1a54a94bd32716796edd@syzkaller.appspotmail.com Reported-by: syzbot+9d2abfef257f3e2d4713@syzkaller.appspotmail.com Suggested-by:
Hillf Danton <hdanton@sina.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200804185815.2453-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Roi Dayan authored
Support for phys switch id ndo added for representors and if we do not have representors there is no need to support it. Since each port return different switch id supporting this block support for creating bond over PFs and attaching to bridge in legacy mode. This bug doesn't exist upstream as the code got refactored and the netdev api is totally different. Fixes: cb67b832 ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Erik Ekman authored
commit d2a4309c upstream. When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba laptop, it changed product ID to 0x9062 when entering QDL mode: usb 2-4: new high-speed USB device number 78 using xhci_hcd usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: EM7305 usb 2-4: Manufacturer: Sierra Wireless, Incorporated The upgrade could complete after running # echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id qcserial 2-4:1.0: Qualcomm USB modem converter detected usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0 Signed-off-by:
Erik Ekman <erik@kryo.se> Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jiang Ying authored
This patch is used to fix ext4 direct I/O read error when the read size is not aligned with block size. Then, I will use a test to explain the error. (1) Make a file that is not aligned with block size: $dd if=/dev/zero of=./test.jar bs=1000 count=3 (2) I wrote a source file named "direct_io_read_file.c" as following: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/file.h> #include <sys/types.h> #include <sys/stat.h> #include <string.h> #define BUF_SIZE 1024 int main() { int fd; int ret; unsigned char *buf; ret = posix_memalign((void **)&buf, 512, BUF_SIZE); if (ret) { perror("posix_memalign failed"); exit(1); } fd = open("./test.jar", O_RDONLY | O_DIRECT, 0755); if (fd < 0){ perror("open ./test.jar failed"); exit(1); } do { ret = read(fd, buf, BUF_SIZE); printf("ret=%d\n",ret); if (ret < 0) { perror("write test.jar failed"); } } while (ret > 0); free(buf); close(fd); } (3) Compile the source file: $gcc direct_io_read_file.c -D_GNU_SOURCE (4) Run the test program: $./a.out The result is as following: ret=1024 ret=1024 ret=952 ret=-1 write test.jar failed: Invalid argument. I have tested this program on XFS filesystem, XFS does not have this problem, because XFS use iomap_dio_rw() to do direct I/O read. And the comparing between read offset and file size is done in iomap_dio_rw(), the code is as following: if (pos < size) { retval = filemap_write_and_wait_range(mapping, pos, pos + iov_length(iov, nr_segs) - 1); if (!retval) { retval = mapping->a_ops->direct_IO(READ, iocb, iov, pos, nr_segs); } ... } ...only when "pos < size", direct I/O can be done, or 0 will be return. I have tested the fix patch on Ext4, it is up to the mustard of EINVAL in man2(read) as following: #include <unistd.h> ssize_t read(int fd, void *buf, size_t count); EINVAL fd is attached to an object which is unsuitable for reading; or the file was opened with the O_DIRECT flag, and either the address specified in buf, the value specified in count, or the current file offset is not suitably aligned. So I think this patch can be applied to fix ext4 direct I/O error. However Ext4 introduces direct I/O read using iomap infrastructure on kernel 5.5, the patch is commit <b1b4705d> ("ext4: introduce direct I/O read using iomap infrastructure"), then Ext4 will be the same as XFS, they all use iomap_dio_rw() to do direct I/O read. So this problem does not exist on kernel 5.5 for Ext4. >From above description, we can see this problem exists on all the kernel versions between kernel 3.14 and kernel 5.4. It will cause the Applications to fail to read. For example, when the search service downloads a new full index file, the search engine is loading the previous index file and is processing the search request, it can not use buffer io that may squeeze the previous index file in use from pagecache, so the serch service must use direct I/O read. Please apply this patch on these kernel versions, or please use the method on kernel 5.5 to fix this problem. Fixes: 9fe55eea ("Fix race when checking i_size on direct i/o read") Reviewed-by:Jan Kara <jack@suse.cz> Reviewed-by:
Wang Long <wanglong19@meituan.com> Signed-off-by:
Jiang Ying <jiangying8582@126.com> Signed-off-by:
-
Linus Torvalds authored
commit c0842fbc upstream. The addition of percpu.h to the list of includes in random.h revealed some circular dependencies on arm64 and possibly other platforms. This include was added solely for the pseudo-random definitions, which have nothing to do with the rest of the definitions in this file but are still there for legacy reasons. This patch moves the pseudo-random parts to linux/prandom.h and the percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and protected against recursive inclusion. A further cleanup step would be to remove this from <linux/random.h> entirely, and make people who use the prandom infrastructure include just the new header file. That's a bit of a churn patch, but grepping for "prandom_" and "next_pseudo_random32" "struct rnd_state" should catch most users. But it turns out that that nice cleanup step is fairly painful, because a _lot_ of code currently seems to depend on the implicit include of <linux/random.h>, which can currently come in a lot of ways, including such fairly core headfers as <linux/net.h>. So the "nice cleanup" part may or may never happen. Fixes: 1c9df907 ("random: fix circular include dependency on arm64 after addition of percpu.h") Tested-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
commit 83bdc727 upstream. It turns out that the plugin right now ends up being really unhappy about the change from 'static' to 'extern' storage that happened in commit f227e3ec ("random32: update the net random state on interrupt and activity"). This is probably a trivial fix for the latent_entropy plugin, but for now, just remove net_rand_state from the list of things the plugin worries about. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Emese Revfy <re.emese@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Willy Tarreau authored
commit 1c9df907 upstream. Daniel Díaz and Kees Cook independently reported that commit f227e3ec ("random32: update the net random state on interrupt and activity") broke arm64 due to a circular dependency on include files since the addition of percpu.h in random.h. The correct fix would definitely be to move all the prandom32 stuff out of random.h but for backporting, a smaller solution is preferred. This one replaces linux/percpu.h with asm/percpu.h, and this fixes the problem on x86_64, arm64, arm, and mips. Note that moving percpu.h around didn't change anything and that removing it entirely broke differently. When backporting, such options might still be considered if this patch fails to help. [ It turns out that an alternate fix seems to be to just remove the troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h> that causes the circular dependency. But we might as well do the whole belt-and-suspenders thing, and minimize inclusion in <linux/random.h> too. Either will fix the problem, and both are good changes. - Linus ] Reported-by:
Daniel Díaz <daniel.diaz@linaro.org> Reported-by:
Kees Cook <keescook@chromium.org> Tested-by:
Marc Zyngier <maz@kernel.org> Fixes: f227e3ec Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Grygorii Strashko authored
commit aa54ea90 upstream. Fix build error for the case: defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6) config: keystone_defconfig CC arch/arm/kernel/signal.o In file included from ../include/linux/random.h:14, from ../arch/arm/kernel/signal.c:8: ../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’: ../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’? : "Q" (*(const unsigned long *)current_stack_pointer)); ^~~~~~~~~~~~~~~~~~~~~ user_stack_pointer Fixes: f227e3ec ("random32: update the net random state on interrupt and activity") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Willy Tarreau authored
commit f227e3ec upstream. This modifies the first 32 bits out of the 128 bits of a random CPU's net_rand_state on interrupt or CPU activity to complicate remote observations that could lead to guessing the network RNG's internal state. Note that depending on some network devices' interrupt rate moderation or binding, this re-seeding might happen on every packet or even almost never. In addition, with NOHZ some CPUs might not even get timer interrupts, leaving their local state rarely updated, while they are running networked processes making use of the random state. For this reason, we also perform this update in update_process_times() in order to at least update the state when there is user or system activity, since it's the only case we care about. Reported-by:
Amit Klein <aksecurity@gmail.com> Suggested-by:
-
Thomas Gleixner authored
commit bdd65589 upstream. 0day reported a possible circular locking dependency: Chain exists of: &irq_desc_lock_class --> console_owner --> &port_lock_key Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&port_lock_key); lock(console_owner); lock(&port_lock_key); lock(&irq_desc_lock_class); The reason for this is a printk() in the i8259 interrupt chip driver which is invoked with the irq descriptor lock held, which reverses the lock operations vs. printk() from arbitrary contexts. Switch the printk() to printk_deferred() to avoid that. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87365abt2v.fsf@nanos.tec.linutronix.deSigned-off-by:
-
Wanpeng Li authored
commit d2286ba7 upstream. Prevent setting the tscdeadline timer if the lapic is hw disabled. Fixes: bce87cce (KVM: x86: consolidate different ways to test for in-kernel LAPIC) Cc: <stable@vger.kernel.org> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Andrea Righi authored
[ Upstream commit c2c63310 ] There's a potential race in xennet_remove(); this is what the driver is doing upon unregistering a network device: 1. state = read bus state 2. if state is not "Closed": 3. request to set state to "Closing" 4. wait for state to be set to "Closing" 5. request to set state to "Closed" 6. wait for state to be set to "Closed" If the state changes to "Closed" immediately after step 1 we are stuck forever in step 4, because the state will never go back from "Closed" to "Closing". Make sure to check also for state == "Closed" in step 4 to prevent the deadlock. Also add a 5 sec timeout any time we wait for the bus state to change, to avoid getting stuck forever in wait_event(). Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Raviteja Narayanam authored
[ Upstream commit 0db9254d ] This reverts commit d358def7. There are two issues with "i2c: cadence: Fix the hold bit setting" commit. 1. In case of combined message request from user space, when the HOLD bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent on the bus even before the last message is started. This is because when the HOLD bit is cleared, the FIFOS are empty and there is no pending transfer. The STOP condition should occur only after the last message is completed. 2. The code added by the commit is redundant. Driver is handling the setting/clearing of HOLD bit in right way before the commit. The setting of HOLD bit based on 'bus_hold_flag' is taken care in cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv functions. The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and cdns_i2c_recv functions based on bus_hold_flag and byte count. Since clearing of HOLD bit is done after the slave address is written to the register (writing to address register triggers the message transfer), it is ensured that STOP condition occurs at the right time after completion of the pending transfer (last message). Signed-off-by:
Raviteja Narayanam <raviteja.narayanam@xilinx.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 015c5d5e ] According to the report of [1], this driver is possible to cause the following error in ravb_tx_timeout_work(). ravb e6800000.ethernet ethernet: failed to switch device to config mode This error means that the hardware could not change the state from "Operation" to "Configuration" while some tx and/or rx queue are operating. After that, ravb_config() in ravb_dmac_init() will fail, and then any descriptors will be not allocaled anymore so that NULL pointer dereference happens after that on ravb_start_xmit(). To fix the issue, the ravb_tx_timeout_work() should check the return values of ravb_stop_dma() and ravb_dmac_init(). If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX and just exits. If ravb_dmac_init() fails, just exits. [1] https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/Reported-by:
Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by:
-
Liam Beguin authored
[ Upstream commit b344d6a8 ] The kernel test bot reported[1] that using set_mask_bits on a u8 causes the following issue on parisc: hppa-linux-ld: drivers/phy/ti/phy-tusb1210.o: in function `tusb1210_probe': >> (.text+0x2f4): undefined reference to `__cmpxchg_called_with_bad_pointer' >> hppa-linux-ld: (.text+0x324): undefined reference to `__cmpxchg_called_with_bad_pointer' hppa-linux-ld: (.text+0x354): undefined reference to `__cmpxchg_called_with_bad_pointer' Add support for cmpxchg on u8 pointers. [1] https://lore.kernel.org/patchwork/patch/1272617/#1468946Reported-by:
Liam Beguin <liambeguin@gmail.com> Tested-by:
Dave Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 1e8fd3a9 ] The implementation of s3fwrn5_recv_frame() is supposed to consume skb on all execution paths. Release skb before returning -ENODEV. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Laurence Oberman authored
[ Upstream commit 1d61e218 ] This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam. Note that this seems to only show up with ISCSI enabled on the HBA via the qedi driver. Signed-off-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit e0484010 ] On sparc32, tcflag_t is "unsigned long", unlike on all other architectures, where it is "unsigned int": drivers/net/usb/hso.c: In function ‘hso_serial_set_termios’: include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 4 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~ include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 5 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~ As "unsigned long" is 32-bit on sparc32, fix this by casting all tcflag_t parameters to "unsigned int". While at it, use "%u" to format unsigned numbers. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Robin Murphy authored
[ Upstream commit 05fb3dbd ] Although iph is expected to point to at least 20 bytes of valid memory, ihl may be bogus, for example on reception of a corrupt packet. If it happens to be less than 5, we really don't want to run away and dereference 16GB worth of memory until it wraps back to exactly zero... Fixes: 0e455d8e ("arm64: Implement optimised IP checksum helpers") Reported-by:
guodeqing <geffrey.guo@huawei.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Remi Pommarel authored
[ Upstream commit 5e43540c ] A mpath object can hold reference on a list of skb that are waiting for mpath resolution to be sent. When destroying a mpath this skb list should be cleaned up in order to not leak memory. Fixing that kind of leak: unreferenced object 0xffff0000181c9300 (size 1088): comm "openvpn", pid 1782, jiffies 4295071698 (age 80.416s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f9 80 36 00 00 00 00 00 ..........6..... 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<000000002caaef13>] sk_prot_alloc.isra.39+0x34/0x178 [<00000000ceeaa916>] sk_alloc+0x34/0x228 [<00000000ca1f1d04>] inet_create+0x198/0x518 [<0000000035626b1c>] __sock_create+0x134/0x328 [<00000000a12b3a87>] __sys_socket+0xb0/0x158 [<00000000ff859f23>] __arm64_sys_socket+0x40/0x58 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc unreferenced object 0xffff000012973a40 (size 216): comm "openvpn", pid 1782, jiffies 4295082137 (age 38.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 c0 06 16 00 00 ff ff 00 93 1c 18 00 00 ff ff ................ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<0000000023c8c8f9>] __alloc_skb+0xc0/0x2b8 [<000000007ad950bb>] alloc_skb_with_frags+0x60/0x320 [<00000000ef90023a>] sock_alloc_send_pskb+0x388/0x3c0 [<00000000104fb1a3>] sock_alloc_send_skb+0x1c/0x28 [<000000006919d2dd>] __ip_append_data+0xba4/0x11f0 [<0000000083477587>] ip_make_skb+0x14c/0x1a8 [<0000000024f3d592>] udp_sendmsg+0xaf0/0xcf0 [<000000005aabe255>] inet_sendmsg+0x5c/0x80 [<000000008651ea08>] __sys_sendto+0x15c/0x218 [<000000003505c99b>] __arm64_sys_sendto+0x74/0x90 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc Fixes: 2bdaf386 (mac80211: mesh: move path tables into if_mesh) Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20200704135419.27703-1-repk@triplefau.ltSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Remi Pommarel authored
[ Upstream commit 6a01afcf ] At ieee80211_join_mesh() some ie data could have been allocated (see copy_mesh_setup()) and need to be cleaned up when leaving the mesh. This fixes the following kmemleak report: unreferenced object 0xffff0000116bc600 (size 128): comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s) hex dump (first 32 bytes): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 0............... 00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00 .........e@..... backtrace: [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330 [<00000000a349dbe1>] kmemdup+0x28/0x50 [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211] [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211] [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211] [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680 [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108 [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0 [<0000000011af8ec9>] genl_rcv+0x34/0x48 [<0000000069e41f53>] netlink_unicast+0x268/0x2e8 [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0 [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0 [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120 [<0000000037340728>] __sys_sendmsg+0xa4/0xf8 [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58 [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0 Fixes: c80d545d (mac80211: Let userspace enable and configure vendor specific path selection.) Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 27a2145d ] RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ error paths. Fix this and dispose of TX IRQ mappings correctly in case of an error. Fixes: ea22d51a ("ibmvnic: simplify and improve driver probe function") Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 3c8ce24b ] The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is managed using RCU. They are freed using kfree_rcu() once the transaction ends. However, in case the transaction failed it is freed immediately after being removed from the active transactions list. This is problematic because it is still possible for a different CPU to dereference the transaction from an RCU read-side critical section while traversing the active transaction list in mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered [1]. Fix this by freeing the transaction after a grace period by calling kfree_rcu(). [1] BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671 Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881 CPU: 0 PID: 2881 Comm: syz-executor.2 Not tainted 5.8.0-rc4+ #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671 mlxsw_core_skb_receive+0x571/0x700 drivers/net/ethernet/mellanox/mlxsw/core.c:2061 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:22 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:48 [inline] do_softirq_own_stack+0x109/0x140 arch/x86/kernel/irq_64.c:77 invoke_softirq kernel/softirq.c:387 [inline] __irq_exit_rcu kernel/softirq.c:417 [inline] irq_exit_rcu+0x16f/0x1a0 kernel/softirq.c:429 sysvec_apic_timer_interrupt+0x4e/0xd0 arch/x86/kernel/apic/apic.c:1091 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:587 RIP: 0010:arch_local_irq_restore arch/x86/include/asm/irqflags.h:85 [inline] RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0x3b/0x40 kernel/locking/spinlock.c:191 Code: e8 2a c3 f4 fc 48 89 ef e8 12 96 f5 fc f6 c7 02 75 11 53 9d e8 d6 db 11 fd 65 ff 0d 1f 21 b3 56 5b 5d c3 e8 a7 d7 11 fd 53 9d <eb> ed 0f 1f 00 55 48 89 fd 65 ff 05 05 21 b3 56 ff 74 24 08 48 8d RSP: 0018:ffff8880446ffd80 EFLAGS: 00000286 RAX: 0000000000000006 RBX: 0000000000000286 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa94ecea9 RBP: ffff888012934408 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: fffffbfff57be301 R12: 1ffff110088dffc1 R13: ffff888037b817c0 R14: ffff88802442415a R15: ffff888024424000 __do_sys_perf_event_open+0x1b5d/0x2bd0 kernel/events/core.c:11874 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x473dbd Code: Bad RIP value. RSP: 002b:00007f21e5e9cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000012a RAX: ffffffffffffffda RBX: 000000000057bf00 RCX: 0000000000473dbd RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000040 RBP: 000000000057bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 000000000057bf0c R13: 00007ffd0493503f R14: 00000000004d0f46 R15: 00007f21e5e9cd80 Allocated by task 871: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] mlxsw_core_reg_access_emad+0x70/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1812 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 Freed by task 871: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4052 mlxsw_core_reg_access_emad+0xd45/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1819 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88800b796400 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 232 bytes inside of 512-byte region [ffff88800b796400, ffff88800b796600) The buggy address belongs to the page: page:ffffea00002de500 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea00002de500 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c402500 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: caf7297e ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 7d8e8f34 ] The lifetime of the Rx listener item ('rxl_item') is managed using RCU, but is dereferenced outside of RCU read-side critical section, which can lead to a use-after-free. Fix this by increasing the scope of the RCU read-side critical section. Fixes: 93c1edb2 ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 3cab8c65 ] It appears that not disabling a PCI device on .shutdown may lead to a Hardware Error with particular (perhaps buggy) BIOS versions: mlx4_en: eth0: Close port called mlx4_en 0000:04:00.0: removed PHC reboot: Restarting system {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 {1}[Hardware Error]: event severity: fatal {1}[Hardware Error]: Error 0, type: fatal {1}[Hardware Error]: section_type: PCIe error {1}[Hardware Error]: port_type: 4, root port {1}[Hardware Error]: version: 1.16 {1}[Hardware Error]: command: 0x4010, status: 0x0143 {1}[Hardware Error]: device_id: 0000:00:02.2 {1}[Hardware Error]: slot: 0 {1}[Hardware Error]: secondary_bus: 0x04 {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f06 {1}[Hardware Error]: class_code: 000604 {1}[Hardware Error]: bridge: secondary_status: 0x2000, control: 0x0003 {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00000000 {1}[Hardware Error]: aer_uncor_severity: 0x00062030 {1}[Hardware Error]: TLP Header: 40000018 040000ff 791f4080 00000000 [hw error repeats] Kernel panic - not syncing: Fatal hardware error! CPU: 0 PID: 2189 Comm: reboot Kdump: loaded Not tainted 5.6.x-blabla #1 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 05/05/2017 Fix the mlx4 driver. This is a very similar problem to what had been fixed in: commit 0d98ba8d ("scsi: hpsa: disable device during shutdown") to address https://bugzilla.kernel.org/show_bug.cgi?id=199779. Fixes: 2ba5fbd6 ("net/mlx4_core: Handle AER flow properly") Reported-by:
Jake Lawrence <lawja@fb.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
-
Johan Hovold authored
[ Upstream commit 63634aa6 ] The interrupt URB transfer-buffer was never freed on disconnect or after probe errors. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 8d8e95fd ] Add the missing endpoint sanity check to prevent a NULL-pointer dereference should a malicious device lack the expected endpoints. Note that the driver has a broken endpoint-lookup helper, lan78xx_get_endpoints(), which can end up accepting interfaces in an altsetting without endpoints as long as *some* altsetting has a bulk-in and a bulk-out endpoint. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by:
-
Michael Karcher authored
[ Upstream commit 04a8a3d0 ] The slow path for traced system call entries accessed a wrong memory location to get the number of the maximum allowed system call number. Renumber the numbered "local" label for the correct location to avoid collisions with actual local labels. Signed-off-by:
Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Tested-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Fixes: f3a83088 ("sh: Add a few missing irqflags tracing markers.") Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
-
YueHaibing authored
commit 8999dc89 upstream. We should check null before do x25_neigh_put in x25_disconnect, otherwise may cause null-ptr-deref like this: #include <sys/socket.h> #include <linux/x25.h> int main() { int sck_x25; sck_x25 = socket(AF_X25, SOCK_SEQPACKET, 0); close(sck_x25); return 0; } BUG: kernel NULL pointer dereference, address: 00000000000000d8 CPU: 0 PID: 4817 Comm: t2 Not tainted 5.7.0-rc3+ #159 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3- RIP: 0010:x25_disconnect+0x91/0xe0 Call Trace: x25_release+0x18a/0x1b0 __sock_release+0x3d/0xc0 sock_close+0x13/0x20 __fput+0x107/0x270 ____fput+0x9/0x10 task_work_run+0x6d/0xb0 exit_to_usermode_loop+0x102/0x110 do_syscall_64+0x23c/0x260 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Reported-by: syzbot+6db548b615e5aeefdce2@syzkaller.appspotmail.com Fixes: 4becb7ee ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Xiyu Yang authored
commit 4becb7ee upstream. x25_connect() invokes x25_get_neigh(), which returns a reference of the specified x25_neigh object to "x25->neighbour" with increased refcnt. When x25 connect success and returns, the reference still be hold by "x25->neighbour", so the refcount should be decreased in x25_disconnect() to keep refcount balanced. The reference counting issue happens in x25_disconnect(), which forgets to decrease the refcnt increased by x25_get_neigh() in x25_connect(), causing a refcnt leak. Fix this issue by calling x25_neigh_put() before x25_disconnect() returns. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
-
Rolf Eike Beer authored
Commit fcc8487d ("uapi: export all headers under uapi directories") changed the default to install all headers not marked to be conditional. This takes the list of headers listed in the commit message and manually adds an export for those that are already present in this kernel version. Found during an attempt to build mtd-utils 2.1.2 as it wants hash_info.h, which exists since 3.13 but has not been installed until the above mentioned commit, which ended up in 4.12. Signed-off-by:
Rolf Eike Beer <eb@emlix.com> Signed-off-by:
-
Nicolas Dichtel authored
commit 9078b4ee upstream. Some files will be exported after a following patch. 0-day tests report the following warning/error: ./usr/include/linux/bcache.h:8: include of <linux/types.h> is preferred over <asm/types.h> ./usr/include/linux/bcache.h:11: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/linux/qrtr.h:8: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/linux/cryptouser.h:39: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/linux/pr.h:14: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/linux/btrfs_tree.h:337: found __[us]{8,16,32,64} type without #include <linux/types.h> ./usr/include/rdma/bnxt_re-abi.h:45: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> reb: left out include/uapi/rdma/bnxt_re-abi.h as it's not in this kernel version Signed-off-by:
-
Rik van Riel authored
commit cdea5459 upstream. The code in xlog_wait uses the spinlock to make adding the task to the wait queue, and setting the task state to UNINTERRUPTIBLE atomic with respect to the waker. Doing the wakeup after releasing the spinlock opens up the following race condition: Task 1 task 2 add task to wait queue wake up task set task state to UNINTERRUPTIBLE This issue was found through code inspection as a result of kworkers being observed stuck in UNINTERRUPTIBLE state with an empty wait queue. It is rare and largely unreproducable. Simply moving the spin_unlock to after the wake_up_all results in the waker not being able to see a task on the waitqueue before it has set its state to UNINTERRUPTIBLE. This bug dates back to the conversion of this code to generic waitqueue infrastructure from a counting semaphore back in 2008 which didn't place the wakeups consistently w.r.t. to the relevant spin locks. [dchinner: Also fix a similar issue in the shutdown path on xc_commit_wait. Update commit log with more details of the issue.] Fixes: d748c623 ("[XFS] Convert l_flushsema to a sv_t") Reported-by:
Chris Mason <clm@fb.com> Signed-off-by:
Rik van Riel <riel@surriel.com> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Samuel Mendoza-Jonas <samjonas@amazon.com> Reviewed-by:
Frank van der Linden <fllinden@amazon.com> Reviewed-by:
Suraj Jitindar Singh <surajjs@amazon.com> Reviewed-by:
Benjamin Herrenschmidt <benh@amazon.com> Reviewed-by:
Anchal Agarwal <anchalag@amazon.com> Signed-off-by:
-
Peilin Ye authored
commit bbc8a99e upstream. rds_notify_queue_get() is potentially copying uninitialized kernel stack memory to userspace since the compiler may leave a 4-byte hole at the end of `cmsg`. In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which unfortunately does not always initialize that 4-byte hole. Fix it by using memset() instead. Cc: stable@vger.kernel.org Fixes: f037590f ("rds: fix a leak of kernel memory") Fixes: bdbe6fbc ("RDS: recv.c") Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit 033724d6 ] syzbot is reporting general protection fault in bitfill_aligned() [1] caused by integer underflow in bit_clear_margins(). The cause of this problem is when and how do_vc_resize() updates vc->vc_{cols,rows}. If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres is going to shrink, vc->vc_{cols,rows} will not be updated. This allows bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will try to overrun the __iomem region and causes general protection fault. Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to new_cols = (cols ? cols : vc->vc_cols); new_rows = (lines ? lines : vc->vc_rows); exception. Since cols and lines are calculated as cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres); rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres); cols /= vc->vc_font.width; rows /= vc->vc_font.height; vc_resize(vc, cols, rows); in fbcon_modechanged(), var.xres < vc->vc_font.width makes cols = 0 and var.yres < vc->vc_font.height makes rows = 0. This means that const int fd = open("/dev/fb0", O_ACCMODE); struct fb_var_screeninfo var = { }; ioctl(fd, FBIOGET_VSCREENINFO, &var); var.xres = var.yres = 1; ioctl(fd, FBIOPUT_VSCREENINFO, &var); easily reproduces integer underflow bug explained above. Of course, callers of vc_resize() are not handling vc_do_resize() failure is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore, as a band-aid workaround, this patch checks integer underflow in "struct fbcon_ops"->clear_margins call, assuming that vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not cause integer overflow. [1] https://syzkaller.appspot.com/bug?id=a565882df74fa76f10d3a6fec4be31098dbb37c6Reported-and-tested-by:
syzbot <syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200715015102.3814-1-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
-
Joerg Roedel authored
[ Upstream commit de2b41be ] On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is page-aligned, but the end of the .bss..page_aligned section is not guaranteed to be page-aligned. As a result, objects from other .bss sections may end up on the same 4k page as the idt_table, and will accidentially get mapped read-only during boot, causing unexpected page-faults when the kernel writes to them. This could be worked around by making the objects in the page aligned sections page sized, but that's wrong. Explicit sections which store only page aligned objects have an implicit guarantee that the object is alone in the page in which it is placed. That works for all objects except the last one. That's inconsistent. Enforcing page sized objects for these sections would wreckage memory sanitizers, because the object becomes artificially larger than it should be and out of bound access becomes legit. Align the end of the .bss..page_aligned and .data..page_aligned section on page-size so all objects places in these sections are guaranteed to have their own page. [ tglx: Amended changelog ] Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Sami Tolvanen authored
[ Upstream commit 6a03469a ] With CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y, we compile the kernel with -fdata-sections, which also splits the .bss section. The new section, with a new .bss.* name, which pattern gets missed by the main x86 linker script which only expects the '.bss' name. This results in the discarding of the second part and a too small, truncated .bss section and an unhappy, non-working kernel. Use the common BSS_MAIN macro in the linker script to properly capture and merge all the generated BSS sections. Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
-
