- 08 May, 2022 10 commits
-
-
Matthew Wilcox (Oracle) authored
Prevent GFP_FS allocations by using memalloc_nofs_save() instead of AOP_FLAG_NOFS. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Matthew Wilcox (Oracle) authored
Stop using AOP_FLAG_NOFS in favour of the scoped memory API. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Matthew Wilcox (Oracle) authored
There are no callers of __page_symlink() left, so we can remove that entry point. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org>
-
Matthew Wilcox (Oracle) authored
By using the memalloc_nofs_save() functionality, we can call page_symlink(), safe in the knowledge that it won't recurse into the filesystem. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Matthew Wilcox (Oracle) authored
Convert scsicam to use a folio instead of a page. There is no need to check the error flag here; read_cache_folio() will return -EIO if the folio cannot be read correctly. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This became slightly larger as I've been off in the last weeks. The majority of changes here is about ASoC, fixes for dmaengine and for addressing issues reported by CI, as well as other device-specific small fixes. Also, fixes for FireWire core stack and the usual HD-audio quirks are included" * tag 'sound-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback ASoC: ops: Validate input values in snd_soc_put_volsw_range() ASoC: dmaengine: Restore NULL prepare_slave_config() callback ASoC: atmel: mchp-pdmc: set prepare_slave_config ASoC: max98090: Generate notifications on changes for custom control ASoC: max98090: Reject invalid values in custom control put() ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakers firewire: core: extend card->lock in fw_core_handle_bus_reset firewire: remove check of list iterator against head past the loop body firewire: fix potential uaf in outbound_phy_packet_callback() ASoC: rt9120: Correct the reg 0x09 size to one byte ALSA: hda/realtek: Enable mute/micmute LEDs support for HP Laptops ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec ASoC: meson: axg-card: Fix nonatomic links ASoC: meson: axg-tdm-interface: Fix formatters in trigger" ASoC: soc-ops: fix error handling ASoC: meson: Fix event generation for G12A tohdmi mux ASoC: meson: Fix event generation for AUI CODEC mux ASoC: meson: Fix event generation for AUI ACODEC mux ...
-
Willy Tarreau authored
The last two users were floppy.c and ataflop.c respectively, it was verified that no other drivers makes use of this, so let's remove it. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Minh Yuan <yuanmingbuaa@gmail.com> Cc: Denis Efremov <efremov@linux.com>, Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Willy Tarreau authored
This is the last driver making use of fd_request->error_count, which is easy to get wrong as was shown in floppy.c. We don't need to keep it there, it can be moved to the atari_floppy_struct instead, so let's do this. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Minh Yuan <yuanmingbuaa@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Willy Tarreau authored
Interrupt handler bad_flp_intr() may cause a UAF on the recently freed request just to increment the error count. There's no point keeping that one in the request anyway, and since the interrupt handler uses a static pointer to the error which cannot be kept in sync with the pending request, better make it use a static error counter that's reset for each new request. This reset now happens when entering redo_fd_request() for a new request via set_next_request(). One initial concern about a single error counter was that errors on one floppy drive could be reported on another one, but this problem is not real given that the driver uses a single drive at a time, as that PC-compatible controllers also have this limitation by using shared signals. As such the error count is always for the "current" drive. Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Tested-by: Denis Efremov <efremov@linux.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.18 A larger collection of fixes than I'd like, mainly because mixer-test is making it's way into the CI systems and turning up issues on a wider range of systems. The most substantial thing though is a revert and an alternative fix for a dmaengine issue where the fix caused disruption for some other configurations, the core fix is backed out an a driver specific thing done instead.
-
- 07 May, 2022 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix the bounds check for the 'gpio-reserved-ranges' device property in gpiolib-of - drop the assignment of the pwm base number in gpio-mvebu (this was missed by the patch doing it globally for all pwm drivers) - fix the fwnode assignment (use own fwnode, not the parent's one) for the GPIO irqchip in gpio-visconti - update the irq_stat field before checking the trigger field in gpio-pca953x - update GPIO entry in MAINTAINERS * tag 'gpio-fixes-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: pca953x: fix irq_stat not updated when irq is disabled (irq_mask not set) gpio: visconti: Fix fwnode of GPIO IRQ MAINTAINERS: update the GPIO git tree entry gpio: mvebu: drop pwm base assignment gpiolib: of: fix bounds check for 'gpio-reserved-ranges'
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A single revert for a change that isn't needed in 5.18, and a small series for s390/dasd" * tag 'block-5.18-2022-05-06' of git://git.kernel.dk/linux-block: s390/dasd: Use kzalloc instead of kmalloc/memset s390/dasd: Fix read inconsistency for ESE DASD devices s390/dasd: Fix read for ESE with blksize < 4k s390/dasd: prevent double format of tracks for ESE devices s390/dasd: fix data corruption for ESE devices Revert "block: release rq qos structures for queue without disk"
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Just a single file assignment fix this week" * tag 'io_uring-5.18-2022-05-06' of git://git.kernel.dk/linux-block: io_uring: assign non-fixed early for async work
-
- 06 May, 2022 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Regression fixes in zone activation: - move a loop invariant out of the loop to avoid checking space status - properly handle unlimited activation Other fixes: - for subpage, force the free space v2 mount to avoid a warning and make it easy to switch a filesystem on different page size systems - export sysfs status of exclusive operation 'balance paused', so the user space tools can recognize it and allow adding a device with paused balance - fix assertion failure when logging directory key range item" * tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: sysfs: export the balance paused state of exclusive operation btrfs: fix assertion failure when logging directory key range item btrfs: zoned: activate block group properly on unlimited active zone device btrfs: zoned: move non-changing condition check out of the loop btrfs: force v2 space cache usage for subpage mount
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix a socket leak when setting up an AF_LOCAL RPC client - Ensure that knfsd connects to the gss-proxy daemon on setup Bugfixes: - Fix a refcount leak when migrating a task off an offlined transport - Don't gratuitously invalidate inode attributes on delegation return - Don't leak sockets in xs_local_connect() - Ensure timely close of disconnected AF_LOCAL sockets" * tag 'nfs-for-5.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: Revert "SUNRPC: attempt AF_LOCAL connect on setup" SUNRPC: Ensure gss-proxy connects on setup SUNRPC: Ensure timely close of disconnected AF_LOCAL sockets SUNRPC: Don't leak sockets in xs_local_connect() NFSv4: Don't invalidate inode attributes on delegation return SUNRPC release the transport of a relocated task with an assigned transport
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "x86: - Account for family 17h event renumberings in AMD PMU emulation - Remove CPUID leaf 0xA on AMD processors - Fix lockdep issue with locking all vCPUs - Fix loss of A/D bits in SPTEs - Fix syzkaller issue with invalid guest state" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Exit to userspace if vCPU has injected exception and invalid state KVM: SEV: Mark nested locking of vcpu->lock kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU KVM: x86/svm: Account for family 17h event renumberings in amd_pmc_perf_hw_id KVM: x86/mmu: Use atomic XCHG to write TDP MMU SPTEs with volatile bits KVM: x86/mmu: Move shadow-present check out of spte_has_volatile_bits() KVM: x86/mmu: Don't treat fully writable SPTEs as volatile (modulo A/D)
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: - A fix to relocate the DTB early in boot, in cases where the bootloader doesn't put the DTB in a region that will end up mapped by the kernel. This manifests as a crash early in boot on a handful of configurations. * tag 'riscv-for-linus-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: relocate DTB if it's outside memory region
-
Sean Christopherson authored
Exit to userspace with an emulation error if KVM encounters an injected exception with invalid guest state, in addition to the existing check of bailing if there's a pending exception (KVM doesn't support emulating exceptions except when emulating real mode via vm86). In theory, KVM should never get to such a situation as KVM is supposed to exit to userspace before injecting an exception with invalid guest state. But in practice, userspace can intervene and manually inject an exception and/or stuff registers to force invalid guest state while a previously injected exception is awaiting reinjection. Fixes: fc4fad79 ("KVM: VMX: Reject KVM_RUN if emulation is required with pending exception") Reported-by: syzbot+cfafed3bb76d3e37581b@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220502221850.131873-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Peter Gonda authored
svm_vm_migrate_from() uses sev_lock_vcpus_for_migration() to lock all source and target vcpu->locks. Unfortunately there is an 8 subclass limit, so a new subclass cannot be used for each vCPU. Instead maintain ownership of the first vcpu's mutex.dep_map using a role specific subclass: source vs target. Release the other vcpu's mutex.dep_maps. Fixes: b5663931 ("KVM: SEV: Add support for SEV intra host migration") Reported-by: John Sperbeck<jsperbeck@google.com> Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Sean Christopherson <seanjc@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Gonda <pgonda@google.com> Message-Id: <20220502165807.529624-1-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "A few recent regressions in rxe's multicast code, and some old driver bugs: - Error case unwind bug in rxe for rkeys - Dot not call netdev functions under a spinlock in rxe multicast code - Use the proper BH lock type in rxe multicast code - Fix idrma deadlock and crash - Add a missing flush to drain irdma QPs when in error - Fix high userspace latency in irdma during destroy due to synchronize_rcu() - Rare race in siw MPA processing" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Change mcg_lock to a _bh lock RDMA/rxe: Do not call dev_mc_add/del() under a spinlock RDMA/siw: Fix a condition race issue in MPA request processing RDMA/irdma: Fix possible crash due to NULL netdev in notifier RDMA/irdma: Reduce iWARP QP destroy time RDMA/irdma: Flush iWARP QP if modified to ERR from RTR state RDMA/rxe: Recheck the MR in when generating a READ reply RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core() RDMA/rxe: Fix "Replace mr by rkey in responder resources"
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull mmc fixes from Ulf Hansson: "MMC core: - Fix initialization for eMMC's HS200/HS400 mode MMC host: - sdhci-msm: Reset GCC_SDCC_BCR register to prevent timeout issues - sunxi-mmc: Fix DMA descriptors allocated above 32 bits" * tag 'mmc-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC mmc: sunxi-mmc: Fix DMA descriptors allocated above 32 bits mmc: core: Set HS clock speed before sending HS CMD13
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A pretty quiet week, one fbdev, msm, kconfig, and two amdgpu fixes, about what I'd expect for rc6. fbdev: - hotunplugging fix amdgpu: - Fix a xen dom0 regression on APUs - Fix a potential array overflow if a receiver were to send an erroneous audio channel count msm: - lockdep fix. it6505: - kconfig fix" * tag 'drm-fixes-2022-05-06' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Avoid reading audio pattern past AUDIO_CHANNELS_COUNT drm/amdgpu: do not use passthrough mode in Xen dom0 drm/bridge: ite-it6505: add missing Kconfig option select fbdev: Make fb_release() return -ENODEV if fbdev was unregistered drm/msm/dp: remove fail safe mode related code
-
Puyou Lu authored
When one port's input state get inverted (eg. from low to hight) after pca953x_irq_setup but before setting irq_mask (by some other driver such as "gpio-keys"), the next inversion of this port (eg. from hight to low) will not be triggered any more (because irq_stat is not updated at the first time). Issue should be fixed after this commit. Fixes: 89ea8bbe ("gpio: pca953x.c: add interrupt handling capability") Signed-off-by: Puyou Lu <puyou.lu@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
-
Haowen Bai authored
Use kzalloc rather than duplicating its implementation, which makes code simple and easy to understand. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-6-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Jan Höppner authored
Read requests that return with NRF error are partially completed in dasd_eckd_ese_read(). The function keeps track of the amount of processed bytes and the driver will eventually return this information back to the block layer for further processing via __dasd_cleanup_cqr() when the request is in the final stage of processing (from the driver's perspective). For this, blk_update_request() is used which requires the number of bytes to complete the request. As per documentation the nr_bytes parameter is described as follows: "number of bytes to complete for @req". This was mistakenly interpreted as "number of bytes _left_ for @req" leading to new requests with incorrect data length. The consequence are inconsistent and completely wrong read requests as data from random memory areas are read back. Fix this by correctly specifying the amount of bytes that should be used to complete the request. Fixes: 5e6bdd37 ("s390/dasd: fix data corruption for thin provisioned devices") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-5-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Jan Höppner authored
When reading unformatted tracks on ESE devices, the corresponding memory areas are simply set to zero for each segment. This is done incorrectly for blocksizes < 4096. There are two problems. First, the increment of dst is done using the counter of the loop (off), which is increased by blksize every iteration. This leads to a much bigger increment for dst as actually intended. Second, the increment of dst is done before the memory area is set to 0, skipping a significant amount of bytes of memory. This leads to illegal overwriting of memory and ultimately to a kernel panic. This is not a problem with 4k blocksize because blk_queue_max_segment_size is set to PAGE_SIZE, always resulting in a single iteration for the inner segment loop (bv.bv_len == blksize). The incorrectly used 'off' value to increment dst is 0 and the correct memory area is used. In order to fix this for blksize < 4k, increment dst correctly using the blksize and only do it at the end of the loop. Fixes: 5e2b17e7 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-4-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Stefan Haberland authored
For ESE devices we get an error for write operations on an unformatted track. Afterwards the track will be formatted and the IO operation restarted. When using alias devices a track might be accessed by multiple requests simultaneously and there is a race window that a track gets formatted twice resulting in data loss. Prevent this by remembering the amount of formatted tracks when starting a request and comparing this number before actually formatting a track on the fly. If the number has changed there is a chance that the current track was finally formatted in between. As a result do not format the track and restart the current IO to check. The number of formatted tracks does not match the overall number of formatted tracks on the device and it might wrap around but this is no problem. It is only needed to recognize that a track has been formatted at all in between. Fixes: 5e2b17e7 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-3-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Stefan Haberland authored
For ESE devices we get an error when accessing an unformatted track. The handling of this error will return zero data for read requests and format the track on demand before writing to it. To do this the code needs to distinguish between read and write requests. This is done with data from the blocklayer request. A pointer to the blocklayer request is stored in the CQR. If there is an error on the device an ERP request is built to do error recovery. While the ERP request is mostly a copy of the original CQR the pointer to the blocklayer request is not copied to not accidentally pass it back to the blocklayer without cleanup. This leads to the error that during ESE handling after an ERP request was built it is not possible to determine the IO direction. This leads to the formatting of a track for read requests which might in turn lead to data corruption. Fixes: 5e2b17e7 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-2-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
single lockdep fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkzqzxDLp82OaKXVrWd7nWZtkxKsuOK1wOGCDz7qF-dA@mail.gmail.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-fixes for v5.18-rc6: - Small fix for hot-unplugging fb devices. - Kconfig fix for it6505. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/69e51773-8c6f-4ff7-9a06-5c2922a43999@linux.intel.com
-
- 05 May, 2022 10 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.18-2022-05-04' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-05-04: amdgpu: - Fix a xen dom0 regression on APUs - Fix a potential array overflow if a receiver were to send an erroneous audio channel count Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220504190439.5723-1-alexander.deucher@amd.com
-
git://git.infradead.org/users/willy/pagecacheLinus Torvalds authored
Pull folio fixes from Matthew Wilcox: "Two folio fixes for 5.18. Darrick and Brian have done amazing work debugging the race I created in the folio BIO iterator. The readahead problem was deterministic, so easy to fix. - Fix a race when we were calling folio_next() in the BIO folio iter without holding a reference, meaning the folio could be split or freed, and we'd jump to the next page instead of the intended next folio. - Fix readahead creating single-page folios instead of the intended large folios when doing reads that are not a power of two in size" * tag 'folio-5.18f' of git://git.infradead.org/users/willy/pagecache: mm/readahead: Fix readahead with large folios block: Do not call folio_next() on an unreferenced folio
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Drop unused 'max-link-speed' in Apple PCIe - More redundant 'maxItems/minItems' schema fixes - Support values for pinctrl 'drive-push-pull' and 'drive-open-drain' - Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding - Add missing 'power-domains' property to Cadence UFSHC * tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pci: apple,pcie: Drop max-link-speed from example dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties' dt-bindings: ufs: cdns,ufshc: Add power-domains
-
David Sterba authored
The new state allowing device addition with paused balance is not exported to user space so it can't recognize it and actually start the operation. Fixes: efc0e69c ("btrfs: introduce exclusive operation BALANCE_PAUSED state") CC: stable@vger.kernel.org # 5.17 Signed-off-by: David Sterba <dsterba@suse.com>
-
Filipe Manana authored
When inserting a key range item (BTRFS_DIR_LOG_INDEX_KEY) while logging a directory, we don't expect the insertion to fail with -EEXIST, because we are holding the directory's log_mutex and we have dropped all existing BTRFS_DIR_LOG_INDEX_KEY keys from the log tree before we started to log the directory. However it's possible that during the logging we attempt to insert the same BTRFS_DIR_LOG_INDEX_KEY key twice, but for this to happen we need to race with insertions of items from other inodes in the subvolume's tree while we are logging a directory. Here's how this can happen: 1) We are logging a directory with inode number 1000 that has its items spread across 3 leaves in the subvolume's tree: leaf A - has index keys from the range 2 to 20 for example. The last item in the leaf corresponds to a dir item for index number 20. All these dir items were created in a past transaction. leaf B - has index keys from the range 22 to 100 for example. It has no keys from other inodes, all its keys are dir index keys for our directory inode number 1000. Its first key is for the dir item with a sequence number of 22. All these dir items were also created in a past transaction. leaf C - has index keys for our directory for the range 101 to 120 for example. This leaf also has items from other inodes, and its first item corresponds to the dir item for index number 101 for our directory with inode number 1000; 2) When we finish processing the items from leaf A at log_dir_items(), we log a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and a last offset of 21, meaning the log is authoritative for the index range from 21 to 21 (a single sequence number). At this point leaf B was not yet modified in the current transaction; 3) When we return from log_dir_items() we have released our read lock on leaf B, and have set *last_offset_ret to 21 (index number of the first item on leaf B minus 1); 4) Some other task inserts an item for other inode (inode number 1001 for example) into leaf C. That resulted in pushing some items from leaf C into leaf B, in order to make room for the new item, so now leaf B has dir index keys for the sequence number range from 22 to 102 and leaf C has the dir items for the sequence number range 103 to 120; 5) At log_directory_changes() we call log_dir_items() again, passing it a 'min_offset' / 'min_key' value of 22 (*last_offset_ret from step 3 plus 1, so 21 + 1). Then btrfs_search_forward() leaves us at slot 0 of leaf B, since leaf B was modified in the current transaction. We have also initialized 'last_old_dentry_offset' to 20 after calling btrfs_previous_item() at log_dir_items(), as it left us at the last item of leaf A, which refers to the dir item with sequence number 20; 6) We then call process_dir_items_leaf() to process the dir items of leaf B, and when we process the first item, corresponding to slot 0, sequence number 22, we notice the dir item was created in a past transaction and its sequence number is greater than the value of *last_old_dentry_offset + 1 (20 + 1), so we decide to log again a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and an end range of 21 (key.offset - 1 == 22 - 1 == 21), which results in an -EEXIST error from insert_dir_log_key(), as we have already inserted that key at step 2, triggering the assertion at process_dir_items_leaf(). The trace produced in dmesg is like the following: assertion failed: ret != -EEXIST, in fs/btrfs/tree-log.c:3857 [198255.980839][ T7460] ------------[ cut here ]------------ [198255.981666][ T7460] kernel BUG at fs/btrfs/ctree.h:3617! [198255.983141][ T7460] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [198255.984080][ T7460] CPU: 0 PID: 7460 Comm: repro-ghost-dir Not tainted 5.18.0-5314c78ac373-misc-next+ [198255.986027][ T7460] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [198255.988600][ T7460] RIP: 0010:assertfail.constprop.0+0x1c/0x1e [198255.989465][ T7460] Code: 8b 4c 89 (...) [198255.992599][ T7460] RSP: 0018:ffffc90007387188 EFLAGS: 00010282 [198255.993414][ T7460] RAX: 000000000000003d RBX: 0000000000000065 RCX: 0000000000000000 [198255.996056][ T7460] RDX: 0000000000000001 RSI: ffffffff8b62b180 RDI: fffff52000e70e24 [198255.997668][ T7460] RBP: ffffc90007387188 R08: 000000000000003d R09: ffff8881f0e16507 [198255.999199][ T7460] R10: ffffed103e1c2ca0 R11: 0000000000000001 R12: 00000000ffffffef [198256.000683][ T7460] R13: ffff88813befc630 R14: ffff888116c16e70 R15: ffffc90007387358 [198256.007082][ T7460] FS: 00007fc7f7c24640(0000) GS:ffff8881f0c00000(0000) knlGS:0000000000000000 [198256.009939][ T7460] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [198256.014133][ T7460] CR2: 0000560bb16d0b78 CR3: 0000000140b34005 CR4: 0000000000170ef0 [198256.015239][ T7460] Call Trace: [198256.015674][ T7460] <TASK> [198256.016313][ T7460] log_dir_items.cold+0x16/0x2c [198256.018858][ T7460] ? replay_one_extent+0xbf0/0xbf0 [198256.025932][ T7460] ? release_extent_buffer+0x1d2/0x270 [198256.029658][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.031114][ T7460] ? lock_acquired+0xbe/0x660 [198256.032633][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.034386][ T7460] ? lock_release+0xcf/0x8a0 [198256.036152][ T7460] log_directory_changes+0xf9/0x170 [198256.036993][ T7460] ? log_dir_items+0xba0/0xba0 [198256.037661][ T7460] ? do_raw_write_unlock+0x7d/0xe0 [198256.038680][ T7460] btrfs_log_inode+0x233b/0x26d0 [198256.041294][ T7460] ? log_directory_changes+0x170/0x170 [198256.042864][ T7460] ? btrfs_attach_transaction_barrier+0x60/0x60 [198256.045130][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.046568][ T7460] ? lock_release+0xcf/0x8a0 [198256.047504][ T7460] ? lock_downgrade+0x420/0x420 [198256.048712][ T7460] ? ilookup5_nowait+0x81/0xa0 [198256.049747][ T7460] ? lock_downgrade+0x420/0x420 [198256.050652][ T7460] ? do_raw_spin_unlock+0xa9/0x100 [198256.051618][ T7460] ? __might_resched+0x128/0x1c0 [198256.052511][ T7460] ? __might_sleep+0x66/0xc0 [198256.053442][ T7460] ? __kasan_check_read+0x11/0x20 [198256.054251][ T7460] ? iget5_locked+0xbd/0x150 [198256.054986][ T7460] ? run_delayed_iput_locked+0x110/0x110 [198256.055929][ T7460] ? btrfs_iget+0xc7/0x150 [198256.056630][ T7460] ? btrfs_orphan_cleanup+0x4a0/0x4a0 [198256.057502][ T7460] ? free_extent_buffer+0x13/0x20 [198256.058322][ T7460] btrfs_log_inode+0x2654/0x26d0 [198256.059137][ T7460] ? log_directory_changes+0x170/0x170 [198256.060020][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.060930][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.061905][ T7460] ? lock_contended+0x770/0x770 [198256.062682][ T7460] ? btrfs_log_inode_parent+0xd04/0x1750 [198256.063582][ T7460] ? lock_downgrade+0x420/0x420 [198256.064432][ T7460] ? preempt_count_sub+0x18/0xc0 [198256.065550][ T7460] ? __mutex_lock+0x580/0xdc0 [198256.066654][ T7460] ? stack_trace_save+0x94/0xc0 [198256.068008][ T7460] ? __kasan_check_write+0x14/0x20 [198256.072149][ T7460] ? __mutex_unlock_slowpath+0x12a/0x430 [198256.073145][ T7460] ? mutex_lock_io_nested+0xcd0/0xcd0 [198256.074341][ T7460] ? wait_for_completion_io_timeout+0x20/0x20 [198256.075345][ T7460] ? lock_downgrade+0x420/0x420 [198256.076142][ T7460] ? lock_contended+0x770/0x770 [198256.076939][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0 [198256.078401][ T7460] ? btrfs_sync_file+0x5e6/0xa40 [198256.080598][ T7460] btrfs_log_inode_parent+0x523/0x1750 [198256.081991][ T7460] ? wait_current_trans+0xc8/0x240 [198256.083320][ T7460] ? lock_downgrade+0x420/0x420 [198256.085450][ T7460] ? btrfs_end_log_trans+0x70/0x70 [198256.086362][ T7460] ? rcu_read_lock_sched_held+0x16/0x80 [198256.087544][ T7460] ? lock_release+0xcf/0x8a0 [198256.088305][ T7460] ? lock_downgrade+0x420/0x420 [198256.090375][ T7460] ? dget_parent+0x8e/0x300 [198256.093538][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0 [198256.094918][ T7460] ? lock_downgrade+0x420/0x420 [198256.097815][ T7460] ? do_raw_spin_unlock+0xa9/0x100 [198256.101822][ T7460] ? dget_parent+0xb7/0x300 [198256.103345][ T7460] btrfs_log_dentry_safe+0x48/0x60 [198256.105052][ T7460] btrfs_sync_file+0x629/0xa40 [198256.106829][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120 [198256.109655][ T7460] ? __fget_files+0x161/0x230 [198256.110760][ T7460] vfs_fsync_range+0x6d/0x110 [198256.111923][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120 [198256.113556][ T7460] __x64_sys_fsync+0x45/0x70 [198256.114323][ T7460] do_syscall_64+0x5c/0xc0 [198256.115084][ T7460] ? syscall_exit_to_user_mode+0x3b/0x50 [198256.116030][ T7460] ? do_syscall_64+0x69/0xc0 [198256.116768][ T7460] ? do_syscall_64+0x69/0xc0 [198256.117555][ T7460] ? do_syscall_64+0x69/0xc0 [198256.118324][ T7460] ? sysvec_call_function_single+0x57/0xc0 [198256.119308][ T7460] ? asm_sysvec_call_function_single+0xa/0x20 [198256.120363][ T7460] entry_SYSCALL_64_after_hwframe+0x44/0xae [198256.121334][ T7460] RIP: 0033:0x7fc7fe97b6ab [198256.122067][ T7460] Code: 0f 05 48 (...) [198256.125198][ T7460] RSP: 002b:00007fc7f7c23950 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [198256.126568][ T7460] RAX: ffffffffffffffda RBX: 00007fc7f7c239f0 RCX: 00007fc7fe97b6ab [198256.127942][ T7460] RDX: 0000000000000002 RSI: 000056167536bcf0 RDI: 0000000000000004 [198256.129302][ T7460] RBP: 0000000000000004 R08: 0000000000000000 R09: 000000007ffffeb8 [198256.130670][ T7460] R10: 00000000000001ff R11: 0000000000000293 R12: 0000000000000001 [198256.132046][ T7460] R13: 0000561674ca8140 R14: 00007fc7f7c239d0 R15: 000056167536dab8 [198256.133403][ T7460] </TASK> Fix this by treating -EEXIST as expected at insert_dir_log_key() and have it update the item with an end offset corresponding to the maximum between the previously logged end offset and the new requested end offset. The end offsets may be different due to dir index key deletions that happened as part of unlink operations while we are logging a directory (triggered when fsyncing some other inode parented by the directory) or during renames which always attempt to log a single dir index deletion. Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Link: https://lore.kernel.org/linux-btrfs/YmyefE9mc2xl5ZMz@hungrycats.org/ Fixes: 732d591a ("btrfs: stop copying old dir items when logging a directory") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
btrfs_zone_activate() checks if it activated all the underlying zones in the loop. However, that check never hit on an unlimited activate zone device (max_active_zones == 0). Fortunately, it still works without ENOSPC because btrfs_zone_activate() returns true in the end, even if block_group->zone_is_active == 0. But, it is confusing to have non zone_is_active block group still usable for allocation. Also, we are wasting CPU time to iterate the loop every time btrfs_zone_activate() is called for the blog groups. Since error case in the loop is handled by out_unlock, we can just set zone_is_active and do the list stuff after the loop. Fixes: f9a912a3 ("btrfs: zoned: make zone activation multi stripe capable") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
btrfs_zone_activate() checks if block_group->alloc_offset == block_group->zone_capacity every time it iterates the loop. But, it is not depending on the index. Move out the check and do it only once. Fixes: f9a912a3 ("btrfs: zoned: make zone activation multi stripe capable") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
[BUG] For a 4K sector sized btrfs with v1 cache enabled and only mounted on systems with 4K page size, if it's mounted on subpage (64K page size) systems, it can cause the following warning on v1 space cache: BTRFS error (device dm-1): csum mismatch on free space cache BTRFS warning (device dm-1): failed to load free space cache for block group 84082688, rebuilding it now Although not a big deal, as kernel can rebuild it without problem, such warning will bother end users, especially if they want to switch the same btrfs seamlessly between different page sized systems. [CAUSE] V1 free space cache is still using fixed PAGE_SIZE for various bitmap, like BITS_PER_BITMAP. Such hard-coded PAGE_SIZE usage will cause various mismatch, from v1 cache size to checksum. Thus kernel will always reject v1 cache with a different PAGE_SIZE with csum mismatch. [FIX] Although we should fix v1 cache, it's already going to be marked deprecated soon. And we have v2 cache based on metadata (which is already fully subpage compatible), and it has almost everything superior than v1 cache. So just force subpage mount to use v2 cache on mount. Reported-by: Matt Corallo <blnxfsl@bluematt.me> CC: stable@vger.kernel.org # 5.15+ Link: https://lore.kernel.org/linux-btrfs/61aa27d1-30fc-c1a9-f0f4-9df544395ec3@bluematt.me/Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - Disable -Warray-bounds warning for gcc12, since the only known way to workaround false positive warnings on lowcore accesses would result in worse code on fast paths. - Avoid lockdep_assert_held() warning in kvm vm memop code. - Reduce overhead within gmap_rmap code to get rid of long latencies when e.g. shutting down 2nd level guests. * tag 's390-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: KVM: s390: vsie/gmap: reduce gmap_rmap overhead KVM: s390: Fix lockdep issue in vm memop s390: disable -Warray-bounds
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fix from Thomas Bogendoerfer: "Extend R4000/R4400 CPU erratum workaround to all revisions" * tag 'mips-fixes_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Fix CP0 counter erratum detection for R4k CPUs
-