Skip to content

L
linux
Switch branch/tag
  1. 18 Dec, 2013 2 commits
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Don't drop low-order page address bits · df9059bb
      Paul Mackerras authored 
      Commit caaa4c80 ("KVM: PPC: Book3S HV: Fix physical address
calculations") unfortunately resulted in some low-order address bits
getting dropped in the case where the guest is creating a 4k HPTE
and the host page size is 64k.  By getting the low-order bits from
hva rather than gpa we miss out on bits 12 - 15 in this case, since
hva is at page granularity.  This puts the missing bits back in.
Reported-by: default avatarAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      df9059bb
    • Aneesh Kumar K.V's avatar
      powerpc: book3s: kvm: Don't abuse host r2 in exit path · 36e7bb38
      Aneesh Kumar K.V authored 
      We don't use PACATOC for PR. Avoid updating HOST_R2 with PR
KVM mode when both HV and PR are enabled in the kernel. Without this we
get the below crash

(qemu)
Unable to handle kernel paging request for data at address 0xffffffffffff8310
Faulting instruction address: 0xc00000000001d5a4
cpu 0x2: Vector: 300 (Data Access) at [c0000001dc53aef0]
    pc: c00000000001d5a4: .vtime_delta.isra.1+0x34/0x1d0
    lr: c00000000001d760: .vtime_account_system+0x20/0x60
    sp: c0000001dc53b170
   msr: 8000000000009032
   dar: ffffffffffff8310
 dsisr: 40000000
  current = 0xc0000001d76c62d0
  paca    = 0xc00000000fef1100   softe: 0        irq_happened: 0x01
    pid   = 4472, comm = qemu-system-ppc
enter ? for help
[c0000001dc53b200] c00000000001d760 .vtime_account_system+0x20/0x60
[c0000001dc53b290] c00000000008d050 .kvmppc_handle_exit_pr+0x60/0xa50
[c0000001dc53b340] c00000000008f51c kvm_start_lightweight+0xb4/0xc4
[c0000001dc53b510] c00000000008cdf0 .kvmppc_vcpu_run_pr+0x150/0x2e0
[c0000001dc53b9e0] c00000000008341c .kvmppc_vcpu_run+0x2c/0x40
[c0000001dc53ba50] c000000000080af4 .kvm_arch_vcpu_ioctl_run+0x54/0x1b0
[c0000001dc53bae0] c00000000007b4c8 .kvm_vcpu_ioctl+0x478/0x730
[c0000001dc53bca0] c0000000002140cc .do_vfs_ioctl+0x4ac/0x770
[c0000001dc53bd80] c0000000002143e8 .SyS_ioctl+0x58/0xb0
[c0000001dc53be30] c000000000009e58 syscall_exit+0x0/0x98
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      36e7bb38
  3. 10 Dec, 2013 1 commit
    • Scott Wood's avatar
      powerpc/kvm/booke: Fix build break due to stack frame size warning · f5f97210
      Scott Wood authored 
      Commit ce11e48b ("KVM: PPC: E500: Add
userspace debug stub support") added "struct thread_struct" to the
stack of kvmppc_vcpu_run().  thread_struct is 1152 bytes on my build,
compared to 48 bytes for the recently-introduced "struct debug_reg".
Use the latter instead.

This fixes the following error:

cc1: warnings being treated as errors
arch/powerpc/kvm/booke.c: In function 'kvmppc_vcpu_run':
arch/powerpc/kvm/booke.c:760:1: error: the frame size of 1424 bytes is larger than 1024 bytes
make[2]: *** [arch/powerpc/kvm/booke.o] Error 1
make[1]: *** [arch/powerpc/kvm] Error 2
make[1]: *** Waiting for unfinished jobs....
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      f5f97210
  5. 09 Dec, 2013 4 commits
    • Alexander Graf's avatar
      KVM: PPC: Book3S: PR: Enable interrupts earlier · 3d3319b4
      Alexander Graf authored 
      Now that the svcpu sync is interrupt aware we can enable interrupts
earlier in the exit code path again, moving 32bit and 64bit closer
together.

While at it, document the fact that we're always executing the exit
path with interrupts enabled so that the next person doesn't trap
over this.
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      3d3319b4
    • Alexander Graf's avatar
      KVM: PPC: Book3S: PR: Make svcpu -> vcpu store preempt savvy · 40fdd8c8
      Alexander Graf authored 
      As soon as we get back to our "highmem" handler in virtual address
space we may get preempted. Today the reason we can get preempted is
that we replay interrupts and all the lazy logic thinks we have
interrupts enabled.

However, it's not hard to make the code interruptible and that way
we can enable and handle interrupts even earlier.

This fixes random guest crashes that happened with CONFIG_PREEMPT=y
for me.
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      40fdd8c8
    • Alexander Graf's avatar
      KVM: PPC: Book3S: PR: Export kvmppc_copy_to|from_svcpu · c9dad7f9
      Alexander Graf authored 
      The kvmppc_copy_{to,from}_svcpu functions are publically visible,
so we should also export them in a header for others C files to
consume.

So far we didn't need this because we only called it from asm code.
The next patch will introduce a C caller.
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      c9dad7f9
    • Alexander Graf's avatar
      KVM: PPC: Book3S: PR: Don't clobber our exit handler id · d825a043
      Alexander Graf authored 
      We call a C helper to save all svcpu fields into our vcpu. The C
ABI states that r12 is considered volatile. However, we keep our
exit handler id in r12 currently.

So we need to save it away into a non-volatile register instead
that definitely does get preserved across the C call.

This bug usually didn't hit anyone yet since gcc is smart enough
to generate code that doesn't even need r12 which means it stayed
identical throughout the call by sheer luck. But we can't rely on
that.
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      d825a043
  7. 18 Nov, 2013 5 commits
    • pingfan liu's avatar
      powerpc: kvm: fix rare but potential deadlock scene · 91648ec0
      pingfan liu authored 
      Since kvmppc_hv_find_lock_hpte() is called from both virtmode and
realmode, so it can trigger the deadlock.

Suppose the following scene:

Two physical cpuM, cpuN, two VM instances A, B, each VM has a group of
vcpus.

If on cpuM, vcpu_A_1 holds bitlock X (HPTE_V_HVLOCK), then is switched
out, and on cpuN, vcpu_A_2 try to lock X in realmode, then cpuN will be
caught in realmode for a long time.

What makes things even worse if the following happens,
  On cpuM, bitlockX is hold, on cpuN, Y is hold.
  vcpu_B_2 try to lock Y on cpuM in realmode
  vcpu_A_2 try to lock X on cpuN in realmode

Oops! deadlock happens
Signed-off-by: default avatarLiu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: default avatarPaul Mackerras <paulus@samba.org>
CC: stable@vger.kernel.org
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      91648ec0
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Take SRCU read lock around kvm_read_guest() call · c9438092
      Paul Mackerras authored 
      Running a kernel with CONFIG_PROVE_RCU=y yields the following diagnostic:

===============================
[ INFO: suspicious RCU usage. ]
3.12.0-rc5-kvm+ #9 Not tainted
-------------------------------

include/linux/kvm_host.h:473 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-ppc/4831:

stack backtrace:
CPU: 28 PID: 4831 Comm: qemu-system-ppc Not tainted 3.12.0-rc5-kvm+ #9
Call Trace:
[c000000be462b2a0] [c00000000001644c] .show_stack+0x7c/0x1f0 (unreliable)
[c000000be462b370] [c000000000ad57c0] .dump_stack+0x88/0xb4
[c000000be462b3f0] [c0000000001315e8] .lockdep_rcu_suspicious+0x138/0x180
[c000000be462b480] [c00000000007862c] .gfn_to_memslot+0x13c/0x170
[c000000be462b510] [c00000000007d384] .gfn_to_hva_prot+0x24/0x90
[c000000be462b5a0] [c00000000007d420] .kvm_read_guest_page+0x30/0xd0
[c000000be462b630] [c00000000007d528] .kvm_read_guest+0x68/0x110
[c000000be462b6e0] [c000000000084594] .kvmppc_rtas_hcall+0x34/0x180
[c000000be462b7d0] [c000000000097934] .kvmppc_pseries_do_hcall+0x74/0x830
[c000000be462b880] [c0000000000990e8] .kvmppc_vcpu_run_hv+0xff8/0x15a0
[c000000be462b9e0] [c0000000000839cc] .kvmppc_vcpu_run+0x2c/0x40
[c000000be462ba50] [c0000000000810b4] .kvm_arch_vcpu_ioctl_run+0x54/0x1b0
[c000000be462bae0] [c00000000007b508] .kvm_vcpu_ioctl+0x478/0x730
[c000000be462bca0] [c00000000025532c] .do_vfs_ioctl+0x4dc/0x7a0
[c000000be462bd80] [c0000000002556b4] .SyS_ioctl+0xc4/0xe0
[c000000be462be30] [c000000000009ee4] syscall_exit+0x0/0x98

To fix this, we take the SRCU read lock around the kvmppc_rtas_hcall()
call.
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      c9438092
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Make tbacct_lock irq-safe · bf3d32e1
      Paul Mackerras authored 
      Lockdep reported that there is a potential for deadlock because
vcpu->arch.tbacct_lock is not irq-safe, and is sometimes taken inside
the rq_lock (run-queue lock) in the scheduler, which is taken within
interrupts.  The lockdep splat looks like:

======================================================
[ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
3.12.0-rc5-kvm+ #8 Not tainted
------------------------------------------------------
qemu-system-ppc/4803 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
(&(&vcpu->arch.tbacct_lock)->rlock){+.+...}, at: [<c0000000000947ac>] .kvmppc_core_vcpu_put_hv+0x2c/0xa0

and this task is already holding:
(&rq->lock){-.-.-.}, at: [<c000000000ac16c0>] .__schedule+0x180/0xaa0
which would create a new lock dependency:
(&rq->lock){-.-.-.} -> (&(&vcpu->arch.tbacct_lock)->rlock){+.+...}

but this new dependency connects a HARDIRQ-irq-safe lock:
(&rq->lock){-.-.-.}
... which became HARDIRQ-irq-safe at:
 [<c00000000013797c>] .lock_acquire+0xbc/0x190
 [<c000000000ac3c74>] ._raw_spin_lock+0x34/0x60
 [<c0000000000f8564>] .scheduler_tick+0x54/0x180
 [<c0000000000c2610>] .update_process_times+0x70/0xa0
 [<c00000000012cdfc>] .tick_periodic+0x3c/0xe0
 [<c00000000012cec8>] .tick_handle_periodic+0x28/0xb0
 [<c00000000001ef40>] .timer_interrupt+0x120/0x2e0
 [<c000000000002868>] decrementer_common+0x168/0x180
 [<c0000000001c7ca4>] .get_page_from_freelist+0x924/0xc10
 [<c0000000001c8e00>] .__alloc_pages_nodemask+0x200/0xba0
 [<c0000000001c9eb8>] .alloc_pages_exact_nid+0x68/0x110
 [<c000000000f4c3ec>] .page_cgroup_init+0x1e0/0x270
 [<c000000000f24480>] .start_kernel+0x3e0/0x4e4
 [<c000000000009d30>] .start_here_common+0x20/0x70

to a HARDIRQ-irq-unsafe lock:
(&(&vcpu->arch.tbacct_lock)->rlock){+.+...}
... which became HARDIRQ-irq-unsafe at:
...  [<c00000000013797c>] .lock_acquire+0xbc/0x190
 [<c000000000ac3c74>] ._raw_spin_lock+0x34/0x60
 [<c0000000000946ac>] .kvmppc_core_vcpu_load_hv+0x2c/0x100
 [<c00000000008394c>] .kvmppc_core_vcpu_load+0x2c/0x40
 [<c000000000081000>] .kvm_arch_vcpu_load+0x10/0x30
 [<c00000000007afd4>] .vcpu_load+0x64/0xd0
 [<c00000000007b0f8>] .kvm_vcpu_ioctl+0x68/0x730
 [<c00000000025530c>] .do_vfs_ioctl+0x4dc/0x7a0
 [<c000000000255694>] .SyS_ioctl+0xc4/0xe0
 [<c000000000009ee4>] syscall_exit+0x0/0x98

Some users have reported this deadlock occurring in practice, though
the reports have been primarily on 3.10.x-based kernels.

This fixes the problem by making tbacct_lock be irq-safe.
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      bf3d32e1
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Refine barriers in guest entry/exit · f019b7ad
      Paul Mackerras authored 
      Some users have reported instances of the host hanging with secondary
threads of a core waiting for the primary thread to exit the guest,
and the primary thread stuck in nap mode.  This prompted a review of
the memory barriers in the guest entry/exit code, and this is the
result.  Most of these changes are the suggestions of Dean Burdick
<deanburdick@us.ibm.com>.

The barriers between updating napping_threads and reading the
entry_exit_count on the one hand, and updating entry_exit_count and
reading napping_threads on the other, need to be isync not lwsync,
since we need to ensure that either the napping_threads update or the
entry_exit_count update get seen.  It is not sufficient to order the
load vs. lwarx, as lwsync does; we need to order the load vs. the
stwcx., so we need isync.

In addition, we need a full sync before sending IPIs to wake other
threads from nap, to ensure that the write to the entry_exit_count is
visible before the IPI occurs.
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      f019b7ad
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Fix physical address calculations · caaa4c80
      Paul Mackerras authored 
      This fixes a bug in kvmppc_do_h_enter() where the physical address
for a page can be calculated incorrectly if transparent huge pages
(THP) are active.  Until THP came along, it was true that if we
encountered a large (16M) page in kvmppc_do_h_enter(), then the
associated memslot must be 16M aligned for both its guest physical
address and the userspace address, and the physical address
calculations in kvmppc_do_h_enter() assumed that.  With THP, that
is no longer true.

In the case where we are using MMU notifiers and the page size that
we get from the Linux page tables is larger than the page being mapped
by the guest, we need to fill in some low-order bits of the physical
address.  Without THP, these bits would be the same in the guest
physical address (gpa) and the host virtual address (hva).  With THP,
they can be different, and we need to use the bits from hva rather
than gpa.

In the case where we are not using MMU notifiers, the host physical
address we get from the memslot->arch.slot_phys[] array already
includes the low-order bits down to the PAGE_SIZE level, even if
we are using large pages.  Thus we can simplify the calculation in
this case to just add in the remaining bits in the case where
PAGE_SIZE is 64k and the guest is mapping a 4k page.

The same bug exists in kvmppc_book3s_hv_page_fault().  The basic fix
is to use psize (the page size from the HPTE) rather than pte_size
(the page size from the Linux PTE) when updating the HPTE low word
in r.  That means that pfn needs to be computed to PAGE_SIZE
granularity even if the Linux PTE is a huge page PTE.  That can be
arranged simply by doing the page_to_pfn() before setting page to
the head of the compound page.  If psize is less than PAGE_SIZE,
then we need to make sure we only update the bits from PAGE_SIZE
upwards, in order not to lose any sub-page offset bits in r.
On the other hand, if psize is greater than PAGE_SIZE, we need to
make sure we don't bring in non-zero low order bits in pfn, hence
we mask (pfn << PAGE_SHIFT) with ~(psize - 1).
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
      caaa4c80
  9. 15 Nov, 2013 28 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7