- 23 May, 2023 13 commits
-
-
Paul Blakey authored
Cited patch is using the eswitch object mapping pool while in nic mode where it isn't initialized. This results in the trace below [0]. Fix that by using either nic or eswitch object mapping pool depending if eswitch is enabled or not. [0]: [ 826.446057] ================================================================== [ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233 [ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1 [ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 826.449785] Call Trace: [ 826.450052] <TASK> [ 826.450302] dump_stack_lvl+0x33/0x50 [ 826.450650] print_report+0xc2/0x610 [ 826.450998] ? __virt_addr_valid+0xb1/0x130 [ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.451935] kasan_report+0xae/0xe0 [ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.453368] ? __kmalloc_node+0x5a/0x120 [ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core] [ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core] [ 826.455011] ? mutex_unlock+0x80/0xd0 [ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core] [ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core] [ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core] [ 826.457636] ? __kasan_kmalloc+0x77/0x90 [ 826.458000] ? __kmalloc+0x57/0x120 [ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core] [ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0 [ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core] [ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core] [ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core] [ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core] [ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core] [ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0 [ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core] [ 826.463163] ? kasan_save_stack+0x2e/0x40 [ 826.463534] ? down_read+0x115/0x1b0 [ 826.463878] ? down_write_killable+0x110/0x110 [ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0 [ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core] [ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core] [ 826.465878] tc_setup_cb_add+0x112/0x250 [ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower] [ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower] [ 826.467212] fl_change+0x14e1/0x2030 [cls_flower] [ 826.467636] ? sock_def_readable+0x89/0x120 [ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.468509] ? kasan_unpoison+0x23/0x50 [ 826.468873] ? get_random_u16+0x180/0x180 [ 826.469244] ? __radix_tree_lookup+0x2b/0x130 [ 826.469640] ? fl_get+0x7b/0x140 [cls_flower] [ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower] [ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.471427] tc_new_tfilter+0x644/0x1050 [ 826.471795] ? tc_get_tfilter+0x860/0x860 [ 826.472170] ? __thaw_task+0x130/0x130 [ 826.472525] ? arch_stack_walk+0x98/0xf0 [ 826.472892] ? cap_capable+0x9f/0xd0 [ 826.473235] ? security_capable+0x47/0x60 [ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550 [ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.474383] ? __stack_depot_save+0x35/0x4c0 [ 826.474779] ? kasan_save_stack+0x2e/0x40 [ 826.475149] ? kasan_save_stack+0x1e/0x40 [ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.475939] ? task_work_add+0x77/0x1c0 [ 826.476305] netlink_rcv_skb+0xe0/0x210 [ 826.476661] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.477057] ? netlink_ack+0x7c0/0x7c0 [ 826.477412] ? rhashtable_jhash2+0xef/0x150 [ 826.477796] ? _copy_from_iter+0x105/0x770 [ 826.484386] netlink_unicast+0x346/0x490 [ 826.484755] ? netlink_attachskb+0x400/0x400 [ 826.485145] ? kernel_text_address+0xc2/0xd0 [ 826.485535] netlink_sendmsg+0x3b0/0x6c0 [ 826.485902] ? kernel_text_address+0xc2/0xd0 [ 826.486296] ? netlink_unicast+0x490/0x490 [ 826.486671] ? iovec_from_user.part.0+0x7a/0x1a0 [ 826.487083] ? netlink_unicast+0x490/0x490 [ 826.487461] sock_sendmsg+0x73/0xc0 [ 826.487803] ____sys_sendmsg+0x364/0x380 [ 826.488186] ? import_iovec+0x7/0x10 [ 826.488531] ? kernel_sendmsg+0x30/0x30 [ 826.488893] ? __copy_msghdr+0x180/0x180 [ 826.489258] ? kasan_save_stack+0x2e/0x40 [ 826.489629] ? kasan_save_stack+0x1e/0x40 [ 826.490002] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.490424] ? __call_rcu_common.constprop.0+0x46/0x580 [ 826.490876] ___sys_sendmsg+0xdf/0x140 [ 826.491231] ? copy_msghdr_from_user+0x110/0x110 [ 826.491649] ? fget_raw+0x120/0x120 [ 826.491988] ? ___sys_recvmsg+0xd9/0x130 [ 826.492355] ? folio_batch_add_and_move+0x80/0xa0 [ 826.492776] ? _raw_spin_lock+0x7a/0xd0 [ 826.493137] ? _raw_spin_lock+0x7a/0xd0 [ 826.493500] ? _raw_read_lock_irq+0x30/0x30 [ 826.493880] ? kasan_set_track+0x21/0x30 [ 826.494249] ? kasan_save_free_info+0x2a/0x40 [ 826.494650] ? do_sys_openat2+0xff/0x270 [ 826.495016] ? __fget_light+0x1b5/0x200 [ 826.495377] ? __virt_addr_valid+0xb1/0x130 [ 826.495763] __sys_sendmsg+0xb2/0x130 [ 826.496118] ? __sys_sendmsg_sock+0x20/0x20 [ 826.496501] ? __x64_sys_rseq+0x2e0/0x2e0 [ 826.496874] ? do_user_addr_fault+0x276/0x820 [ 826.497273] ? fpregs_assert_state_consistent+0x52/0x60 [ 826.497727] ? exit_to_user_mode_prepare+0x30/0x120 [ 826.498158] do_syscall_64+0x3d/0x90 [ 826.498502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.498949] RIP: 0033:0x7f9b67f4f887 [ 826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887 [ 826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003 [ 826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001 [ 826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400 [ 826.504304] </TASK> [ 826.504753] Allocated by task 3764: [ 826.505090] kasan_save_stack+0x1e/0x40 [ 826.505453] kasan_set_track+0x21/0x30 [ 826.505810] __kasan_kmalloc+0x77/0x90 [ 826.506164] __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core] [ 826.506742] esw_offloads_enable+0x60d/0xfb0 [mlx5_core] [ 826.507292] mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core] [ 826.507885] mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core] [ 826.508513] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.508969] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.509427] genl_rcv_msg+0x28d/0x3e0 [ 826.509772] netlink_rcv_skb+0xe0/0x210 [ 826.510133] genl_rcv+0x24/0x40 [ 826.510448] netlink_unicast+0x346/0x490 [ 826.510810] netlink_sendmsg+0x3b0/0x6c0 [ 826.511179] sock_sendmsg+0x73/0xc0 [ 826.511519] __sys_sendto+0x18d/0x220 [ 826.511867] __x64_sys_sendto+0x72/0x80 [ 826.512232] do_syscall_64+0x3d/0x90 [ 826.512576] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.513220] Freed by task 5674: [ 826.513535] kasan_save_stack+0x1e/0x40 [ 826.513893] kasan_set_track+0x21/0x30 [ 826.514245] kasan_save_free_info+0x2a/0x40 [ 826.514629] ____kasan_slab_free+0x11a/0x1b0 [ 826.515021] __kmem_cache_free+0x14d/0x280 [ 826.515399] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.515907] mlx5_destroy_flow_table+0x119/0x630 [mlx5_core] [ 826.516481] esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core] [ 826.517084] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.517632] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.518225] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.518834] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.519286] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.519748] genl_rcv_msg+0x28d/0x3e0 [ 826.520101] netlink_rcv_skb+0xe0/0x210 [ 826.520458] genl_rcv+0x24/0x40 [ 826.520771] netlink_unicast+0x346/0x490 [ 826.521137] netlink_sendmsg+0x3b0/0x6c0 [ 826.521505] sock_sendmsg+0x73/0xc0 [ 826.521842] __sys_sendto+0x18d/0x220 [ 826.522191] __x64_sys_sendto+0x72/0x80 [ 826.522554] do_syscall_64+0x3d/0x90 [ 826.522894] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.523540] Last potentially related work creation: [ 826.523969] kasan_save_stack+0x1e/0x40 [ 826.524331] __kasan_record_aux_stack+0x9f/0xb0 [ 826.524739] insert_work+0x30/0x130 [ 826.525078] __queue_work+0x34b/0x690 [ 826.525426] queue_work_on+0x48/0x50 [ 826.525766] __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core] [ 826.526365] del_sw_flow_group+0x1b5/0x270 [mlx5_core] [ 826.526898] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.527407] esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core] [ 826.528009] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.528616] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.529218] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.529823] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.530276] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.530733] genl_rcv_msg+0x28d/0x3e0 [ 826.531079] netlink_rcv_skb+0xe0/0x210 [ 826.531439] genl_rcv+0x24/0x40 [ 826.531755] netlink_unicast+0x346/0x490 [ 826.532123] netlink_sendmsg+0x3b0/0x6c0 [ 826.532487] sock_sendmsg+0x73/0xc0 [ 826.532825] __sys_sendto+0x18d/0x220 [ 826.533175] __x64_sys_sendto+0x72/0x80 [ 826.533533] do_syscall_64+0x3d/0x90 [ 826.533877] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.534521] The buggy address belongs to the object at ffff888194485800 which belongs to the cache kmalloc-512 of size 512 [ 826.535506] The buggy address is located 48 bytes inside of freed 512-byte region [ffff888194485800, ffff888194485a00) [ 826.536666] The buggy address belongs to the physical page: [ 826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480 [ 826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002 [ 826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 826.540417] page dumped because: kasan: bad access detected [ 826.541095] Memory state around the buggy address: [ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.543400] ^ [ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.545079] ================================================================== Fixes: 67027828 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Rahul Rameshbabu authored
Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up. Fixes: 1880bc4e ("net/mlx5e: Add TX port timestamp support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Vlad Buslov authored
Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196bd ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
Fix spacing for the error and also the correct error code pointer. Fixes: c9b9dcb4 ("net/mlx5: Move device memory management to mlx5_core") Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Vlad Buslov authored
With introduction of post action infrastructure most of the users of encap attribute had been modified in order to obtain the correct attribute by calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action is always on default attribute. However, the cited commit didn't modify mlx5e_invalidate_encap() which prevents it from destroying correct modify header action which leads to a warning [0]. Fix the issue by using correct attribute. [0]: Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace: Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK> Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230 Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90 Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0 Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Yevgeny Kliteynik authored
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB (loopback), and FL (force-loopback) QP is preferred for performance. FL is available when RoCE is enabled or disabled based on RoCE caps. This patch adds reading of FL capability from HCA caps in addition to the existing reading from RoCE caps, thus fixing the case where we didn't have loopback enabled when RoCE was disabled. Fixes: 7304d603 ("net/mlx5: DR, Add support for force-loopback QP") Signed-off-by: Itamar Gozlan <igozlan@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Erez Shitrit authored
When calculating crc for hash index we use the function crc32 that calculates for little-endian (LE) arch. Then we convert it to network endianness using htonl(), but it's wrong to do the conversion in BE archs since the crc32 value is already LE. The solution is to switch the bytes from the crc result for all types of arc. Fixes: 40416d8e ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib") Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Shay Drory authored
In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [1] In case VF_LAG is used, every tc fdb flow is duplicated to the peer esw. However, the original esw keeps a pointer to this duplicated flow, not the peer esw. e.g.: if user create tc fdb flow over esw0, the flow is duplicated over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated flow. During module unload while a peer tc fdb flow is still offloaded, in case the first device to be removed is the peer device (esw1 in the example above), the peer net-dev is destroyed, and so the mlx5e_priv is memset to 0. Afterwards, the peer device is trying to unpair himself from the original device (esw0 in the example above). Unpair API invoke the original device to clear peer flow from its eswitch (esw0), but the peer flow, which is stored over the original eswitch (esw0), is trying to use the peer mlx5e_priv, which is memset to 0 and result in bellow kernel-oops. [ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60 [ 157.964662 ] #PF: supervisor read access in kernel mode [ 157.965123 ] #PF: error_code(0x0000) - not-present page [ 157.965582 ] PGD 0 P4D 0 [ 157.965866 ] Oops: 0000 [#1] SMP [ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core] [ 157.976164 ] Call Trace: [ 157.976437 ] <TASK> [ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core] [ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core] [ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core] [ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core] [ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core] [ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core] [ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core] [ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core] [ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core] [ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core] [ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core] [ 157.988549 ] pci_device_remove+0x31/0xa0 [ 157.988933 ] device_release_driver_internal+0x18f/0x1f0 [ 157.989402 ] driver_detach+0x3f/0x80 [ 157.989754 ] bus_remove_driver+0x70/0xf0 [ 157.990129 ] pci_unregister_driver+0x34/0x90 [ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core] [ 157.990972 ] __x64_sys_delete_module+0x15a/0x250 [ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110 [ 157.991840 ] do_syscall_64+0x3d/0x90 [ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 04de7dda ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Fixes: 1418ddd9 ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Shay Drory authored
DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data. Fixes: 34f46ae0 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Chuck Lever authored
sock->file = sock_alloc_file(sock, O_NONBLOCK, NULL); ^^^^ ^^^^ sock_alloc_file() calls release_sock() on error but the left hand side of the assignment dereferences "sock". This isn't the bug and I didn't report this earlier because there is an assert that it doesn't fail. net/handshake/handshake-test.c:221 handshake_req_submit_test4() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:233 handshake_req_submit_test4() warn: 'req' was already freed. net/handshake/handshake-test.c:254 handshake_req_submit_test5() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:290 handshake_req_submit_test6() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:321 handshake_req_cancel_test1() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:355 handshake_req_cancel_test2() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:367 handshake_req_cancel_test2() warn: 'req' was already freed. net/handshake/handshake-test.c:395 handshake_req_cancel_test3() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:407 handshake_req_cancel_test3() warn: 'req' was already freed. net/handshake/handshake-test.c:451 handshake_req_destroy_test1() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:463 handshake_req_destroy_test1() warn: 'req' was already freed. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 88232ec1 ("net/handshake: Add Kunit tests for the handshake consumer API") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/168451609436.45209.15407022385441542980.stgit@oracle-102.nfsv4bat.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Chuck Lever authored
The "handshake_req_alloc excessive privsize" kunit test is intended to check what happens when the maximum privsize is exceeded. The WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for this test. Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 88232ec1 ("net/handshake: Add Kunit tests for the handshake consumer API") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/168451636052.47152.9600443326570457947.stgit@oracle-102.nfsv4bat.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christophe JAILLET authored
Should tc589_config() fail, some resources need to be released as already done in the remove function. Fixes: 15b99ac1 ("[PATCH] pcmcia: add return value to _config() functions") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christophe JAILLET authored
If an error occures after calling nv_mgmt_acquire_sema(), it should be undone with a corresponding nv_mgmt_release_sema() call. Add it in the error handling path of the probe as already done in the remove function. Fixes: cac1c52c ("forcedeth: mgmt unit interface") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 22 May, 2023 1 commit
-
-
Xin Long authored
When doing plpmtu probe, the probe size is growing every time when it receives the ACK during the Search state until the probe fails. When the failure occurs, pl.probe_high is set and it goes to the Complete state. However, if the link pmtu is huge, like 65535 in loopback_dev, the probe eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails. Because of that, pl.probe_high can not be set, and the plpmtu probe can never go to the Complete state. Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow the probe size greater than SCTP_MAX_PLPMTU in the Complete state. Fixes: b87641af ("sctp: do state transition when a probe succeeds on HB ACK recv path") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 May, 2023 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix compiler warnings on btnxpuart - Fix potential double free on hci_conn_unlink - Fix UAF on hci_conn_hash_flush * tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btnxpuart: Fix compiler warnings Bluetooth: Unlink CISes when LE disconnects in hci_conn_del Bluetooth: Fix UAF in hci_conn_hash_flush again Bluetooth: Refcnt drop must be placed last in hci_conn_unlink Bluetooth: Fix potential double free caused by hci_conn_unlink ==================== Link: https://lore.kernel.org/r/20230519233056.2024340-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Taehee Yoo authored
When the virtual interface's feature is updated, it synchronizes the updated feature for its own lower interface. This propagation logic should be worked as the iteration, not recursively. But it works recursively due to the netdev notification unexpectedly. This problem occurs when it disables LRO only for the team and bonding interface type. team0 | +------+------+-----+-----+ | | | | | team1 team2 team3 ... team200 If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE event to its own lower interfaces(team1 ~ team200). It is worked by netdev_sync_lower_features(). So, the NETDEV_FEAT_CHANGE notification logic of each lower interface work iteratively. But generated NETDEV_FEAT_CHANGE event is also sent to the upper interface too. upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own lower interfaces again. lower and upper interfaces receive this event and generate this event again and again. So, the stack overflow occurs. But it is not the infinite loop issue. Because the netdev_sync_lower_features() updates features before generating the NETDEV_FEAT_CHANGE event. Already synchronized lower interfaces skip notification logic. So, it is just the problem that iteration logic is changed to the recursive unexpectedly due to the notification mechanism. Reproducer: ip link add team0 type team ethtool -K team0 lro on for i in {1..200} do ip link add team$i master team0 type team ethtool -K team$i lro on done ethtool -K team0 lro off In order to fix it, the notifier_ctx member of bonding/team is introduced. Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 19 May, 2023 21 commits
-
-
Neeraj Sanjay Kale authored
This fixes the follwing compiler warning reported by kernel test robot: drivers/bluetooth/btnxpuart.c:1332:34: warning: unused variable 'nxpuart_of_match_table' [-Wunused-const-variable] Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305161345.eClvTYQ9-lkp@intel.com/Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Ruihan Li authored
Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and CIS connections, i.e., everything except LE connections. However, if (e)SCO connections are unlinked when BR/EDR disconnects, CIS connections should also be unlinked when LE disconnects. In terms of disconnection behavior, CIS and (e)SCO connections are not too different. One peculiarity of CIS is that when CIS connections are disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command: All SCO, eSCO, and CIS connections on a physical link should be disconnected before the ACL connection on the same physical connection is disconnected. If it does not, they will be implicitly disconnected as part of the ACL disconnection. ... Note: As specified in Section 7.7.5, on the Central, the handle for a CIS remains valid even after disconnection and, therefore, the Host can recreate a disconnected CIS at a later point in time using the same connection handle. Since hci_conn_link invokes both hci_conn_get and hci_conn_hold, hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as well. However, currently it performs only hci_conn_put. This patch makes hci_conn_unlink call hci_conn_drop as well, which simplifies the logic in hci_conn_del a bit and may benefit future users of hci_conn_unlink. But it is noted that this change additionally implies that hci_conn_unlink can queue disc_work on conn itself, with the following call stack: hci_conn_unlink(conn) [conn->parent == NULL] -> hci_conn_unlink(child) [child->parent == conn] -> hci_conn_drop(child->parent) -> queue_delayed_work(&conn->disc_work) Queued disc_work after hci_conn_del can be spurious, so during the process of hci_conn_del, it is necessary to make the call to cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink. Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Ruihan Li authored
Commit 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon") reintroduced a previously fixed bug [1] ("KASAN: slab-use-after-free Read in hci_conn_hash_flush"). This bug was originally fixed by commit 5dc7d23e ("Bluetooth: hci_conn: Fix possible UAF"). The hci_conn_unlink function was added to avoid invalidating the link traversal caused by successive hci_conn_del operations releasing extra connections. However, currently hci_conn_unlink itself also releases extra connections, resulted in the reintroduced bug. This patch follows a more robust solution for cleaning up all connections, by repeatedly removing the first connection until there are none left. This approach does not rely on the inner workings of hci_conn_del and ensures proper cleanup of all connections. Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it doesn't, as it now always returns zero. To make this a bit clearer, this patch also changes its return type to void. Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/000000000000aa920505f60d25ad@google.com/ Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Ruihan Li authored
If hci_conn_put(conn->parent) reduces conn->parent's reference count to zero, it can immediately deallocate conn->parent. At the same time, conn->link->list has its head in conn->parent, causing use-after-free problems in the latter list_del_rcu(&conn->link->list). This problem can be easily solved by reordering the two operations, i.e., first performing the list removal with list_del_rcu and then decreasing the refcnt with hci_conn_put. Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Closes: https://lore.kernel.org/linux-bluetooth/CABBYNZ+1kce8_RJrLNOXd_8=Mdpb=2bx4Nto-hFORk=qiOkoCg@mail.gmail.com/ Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Ruihan Li authored
The hci_conn_unlink function is being called by hci_conn_del, which means it should not call hci_conn_del with the input parameter conn again. If it does, conn may have already been released when hci_conn_unlink returns, leading to potential UAF and double-free issues. This patch resolves the problem by modifying hci_conn_unlink to release only conn's child links when necessary, but never release conn itself. Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/000000000000484a8205faafe216@google.com/ Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon") Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
-
Shenwei Wang authored
Two dma_wmb() are added in the XDP TX path to ensure proper ordering of descriptor and buffer updates: 1. A dma_wmb() is added after updating the last BD to make sure the updates to rest of the descriptor are visible before transferring ownership to FEC. 2. A dma_wmb() is also added after updating the bdp to ensure these updates are visible before updating txq->bd.cur. 3. Start the xmit of the frame immediately right after configuring the tx descriptor. Fixes: 6d6b39f1 ("net: fec: add initial XDP support") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
I would like to be copied on new patches submitted on this driver. I am relatively familiar with the code, having practically maintained it for a while. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
HW adds segment size to the payload length in the IPv6 header. Fix payload length to just TCP header length instead of 'TCP header size + IPv6 header size'. Fixes: 86d74760 ("octeontx2-pf: TCP segmentation offload support") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alejandro Lucero authored
Avoid early devlink info return if errors arise with MCDI commands executed for getting the required info from the device. The rationale is some commands can fail but later ones could still give useful data. Moreover, some nvram partitions could not be present which needs to be handled as a non error. The specific errors are reported through system messages and if any error appears, it will be reported generically through extack. Fixes 14743ddd ("sfc: add devlink info support for ef100") Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wen Gu authored
We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It can be reproduced by: - smc_run nginx - smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port> BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc] RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00 RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib] ? smcr_buf_map_link+0x24b/0x290 [smc] ? __smc_buf_create+0x4ee/0x9b0 [smc] smc_clc_send_accept+0x4c/0xb0 [smc] smc_listen_work+0x346/0x650 [smc] ? __schedule+0x279/0x820 process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> During the CLC handshake, server sequentially tries available SMCRv2 and SMCRv1 devices in smc_listen_work(). If an SMCRv2 device is found. SMCv2 based link group and link will be assigned to the connection. Then assumed that some buffer assignment errors happen later in the CLC handshake, such as RMB registration failure, server will give up SMCRv2 and try SMCRv1 device instead. But the resources assigned to the connection won't be reset. When server tries SMCRv1 device, the connection creation process will be executed again. Since conn->lnk has been assigned when trying SMCRv2, it will not be set to the correct SMCRv1 link in smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to correct SMCRv1 link group but conn->lnk points to the SMCRv2 link mistakenly. Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx] will be accessed. Since the link->link_idx is not correct, the related MR may not have been initialized, so crash happens. | Try SMCRv2 device first | |-> conn->lgr: assign existed SMCRv2 link group; | |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC); | |-> sndbuf & RMB creation fails, quit; | | Try SMCRv1 device then | |-> conn->lgr: create SMCRv1 link group and assign; | |-> conn->link: keep SMCRv2 link mistakenly; | |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0] | initialized. | | Then smc_clc_send_confirm_accept() accesses | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash. v This patch tries to fix this by cleaning conn->lnk before assigning link. In addition, it is better to reset the connection and clean the resources assigned if trying SMCRv2 failed in buffer creation or registration. Fixes: e49300a6 ("net/smc: add listen processing for SMC-Rv2") Link: https://lore.kernel.org/r/20220523055056.2078994-1-liuyacan@corp.netease.com/Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Po-Hsu Lin authored
In the end of the test, there will be an error message induced by the `ip netns del ns1` command in cleanup() Tests passed: 201 Tests failed: 0 Cannot remove namespace file "/run/netns/ns1": No such file or directory This can even be reproduced with just `./fib_tests.sh -h` as we're calling cleanup() on exit. Redirect the error message to /dev/null to mute it. V2: Update commit message and fixes tag. V3: resubmit due to missing netdev ML in V2 Fixes: b60417a9 ("selftest: fib_tests: Always cleanup before exit") Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
NAPI gets called with budget of 0 from netpoll, which has interrupts disabled. We should try to free some space on Tx rings and nothing else. Specifically do not try to handle XDP TX or try to refill Rx buffers - we can't use the page pool from IRQ context. Don't check if IRQs moved, either, that makes no sense in netpoll. Netpoll calls _all_ the rings from whatever CPU it happens to be invoked on. In general do as little as possible, the work quickly adds up when there's tens of rings to poll. The immediate stack trace I was seeing is: __do_softirq+0xd1/0x2c0 __local_bh_enable_ip+0xc7/0x120 </IRQ> <TASK> page_pool_put_defragged_page+0x267/0x320 mlx5e_free_xdpsq_desc+0x99/0xd0 mlx5e_poll_xdpsq_cq+0x138/0x3b0 mlx5e_napi_poll+0xc3/0x8b0 netpoll_poll_dev+0xce/0x150 AFAIU page pool takes a BH lock, releases it and since BH is now enabled tries to run softirqs. Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Fixes: 60bbf7ee ("mlx5: use page_pool for xdp_return_frame call") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== tls: rx: strp: fix inline crypto offload The local strparser version I added to TLS does not preserve decryption status, which breaks inline crypto (NIC offload). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
When receive buffer is small, or the TCP rx queue looks too complicated to bother using it directly - we allocate a new skb and copy data into it. We already use sk->sk_allocation... but nothing actually sets it to GFP_ATOMIC on the ->sk_data_ready() path. Users of HW offload are far more likely to experience problems due to scheduling while atomic. "Copy mode" is very rarely triggered with SW crypto. Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by: Shai Amiram <samiram@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
When receive buffer is small we try to copy out the data from TCP into a skb maintained by TLS to prevent connection from stalling. Unfortunately if a single record is made up of a mix of decrypted and non-decrypted skbs combining them into a single skb leads to loss of decryption status, resulting in decryption errors or data corruption. Similarly when trying to use TCP receive queue directly we need to make sure that all the skbs within the record have the same status. If we don't the mixed status will be detected correctly but we'll CoW the anchor, again collapsing it into a single paged skb without decrypted status preserved. So the "fixup" code will not know which parts of skb to re-encrypt. Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by: Shai Amiram <samiram@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We'll need to copy input skbs individually in the next patch. Factor that code out (without assuming we're copying a full record). Tested-by: Shai Amiram <samiram@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We call tls_rx_msg_size(skb) before doing skb->len += chunk. So the tls_rx_msg_size() code will see old skb->len, most likely leading to an over-read. Worst case we will over read an entire record, next iteration will try to trim the skb but may end up turning frag len negative or discarding the subsequent record (since we already told TCP we've read it during previous read but now we'll trim it out of the skb). Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by: Shai Amiram <samiram@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
If a record is partially decrypted we'll have to CoW it, anyway, so go into copy mode and allocate a writable skb right away. This will make subsequent fix simpler because we won't have to teach tls_strp_msg_make_copy() how to copy skbs while preserving decrypt status. Tested-by: Shai Amiram <samiram@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
alloc_skb_with_frags() fills in page frag sizes but does not set skb->len and skb->data_len. Set those correctly otherwise device offload will most likely generate an empty skb and hit the BUG() at the end of __skb_nsg(). Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by: Shai Amiram <samiram@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
skb->len covers the entire skb, including the frag_list. In fact we're guaranteed that rxm->full_len <= skb->len, so since the change under Fixes we were not checking decrypt status of any skb but the first. Note that the skb_pagelen() added here may feel a bit costly, but it's removed by subsequent fixes, anyway. Reported-by: Tariq Toukan <tariqt@nvidia.com> Fixes: 86b259f6 ("tls: rx: device: bound the frag walk") Tested-by: Shai Amiram <samiram@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tudor Ambarus authored
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d1 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d3 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 18 May, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from can, xfrm, bluetooth and netfilter. Current release - regressions: - ipv6: fix RCU splat in ipv6_route_seq_show() - wifi: iwlwifi: disable RFI feature Previous releases - regressions: - tcp: fix possible sk_priority leak in tcp_v4_send_reset() - tipc: do not update mtu if msg_max is too small in mtu negotiation - netfilter: fix null deref on element insertion - devlink: change per-devlink netdev notifier to static one - phylink: fix ksettings_set() ethtool call - wifi: mac80211: fortify the spinlock against deadlock by interrupt - wifi: brcmfmac: check for probe() id argument being NULL - eth: ice: - fix undersized tx_flags variable - fix ice VF reset during iavf initialization - eth: hns3: fix sending pfc frames after reset issue Previous releases - always broken: - xfrm: release all offloaded policy memory - nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment() - vsock: avoid to close connected socket after the timeout - dsa: rzn1-a5psw: enable management frames for CPU port - eth: virtio_net: fix error unwinding of XDP initialization - eth: tun: fix memory leak for detached NAPI queue. Misc: - MAINTAINERS: sctp: move Neil to CREDITS" * tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits) MAINTAINERS: skip CCing netdev for Bluetooth patches mdio_bus: unhide mdio_bus_init prototype bridge: always declare tunnel functions atm: hide unused procfs functions net: isa: include net/Space.h Revert "ARM: dts: stm32: add CAN support on stm32f746" netfilter: nft_set_rbtree: fix null deref on element insertion netfilter: nf_tables: fix nft_trans type confusion netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT net: wwan: t7xx: Ensure init is completed before system sleep net: selftests: Fix optstring net: pcs: xpcs: fix C73 AN not getting enabled net: wwan: iosm: fix NULL pointer dereference when removing device vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit() mailmap: add entries for Nikolay Aleksandrov igb: fix bit_shift to be in [1..8] range net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset cassini: Fix a memory leak in the error handling path of cas_init_one() tun: Fix memory leak for detached NAPI queue. can: kvaser_pciefd: Disable interrupts in probe error path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Several fixes for the dvb core and drivers: - fix UAF and null pointer de-reference in DVB core - fix kernel runtime warning for blocking operation in wait_event*() in dvb core - fix write size bug in DVB conditional access core - fix dvb demux continuity counter debug check logic - randconfig build fixes in pvrusb2 and mn88443x - fix memory leak in ttusb-dec - fix netup_unidvb probe-time error check logic - improve error handling in dw2102 if it can't retrieve DVB MAC address" * tag 'media/v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221 media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*() media: dvb-core: Fix use-after-free due to race at dvb_register_device() media: dvb-core: Fix use-after-free due on race condition at dvb_net media: dvb-core: Fix use-after-free on race condition at dvb_frontend media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb() media: dvb_ca_en50221: fix a size write bug media: netup_unidvb: fix irq init by register it at the end of probe media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer() media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer() media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer() media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer() media: netup_unidvb: fix use-after-free at del_timer() media: dvb_demux: fix a bug for the continuity counter media: pvrusb2: fix DVB_CORE dependency
-
Paolo Abeni authored
Merge tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-05-18 this is a pull request of 7 patches for net/master. The first 6 patches are by Jimmy Assarsson and fix several bugs in the kvaser_pciefd driver. The latest patch is from me and reverts a change in stm32f746.dtsi that causes build errors due to a missing dependent patch. * tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: Revert "ARM: dts: stm32: add CAN support on stm32f746" can: kvaser_pciefd: Disable interrupts in probe error path can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt can: kvaser_pciefd: Empty SRB buffer in probe can: kvaser_pciefd: Call request_irq() before enabling interrupts can: kvaser_pciefd: Clear listen-only bit if not explicitly requested can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop() ==================== Link: https://lore.kernel.org/r/20230518073241.1110453-1-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-