Pull ACPI and power management fixes from Rafael J Wysocki:

 - Fix for a recent cpufreq regression related to acpi-cpufreq and
   suspend/resume from Viresh Kumar.

 - cpufreq stats reference counting fix from Viresh Kumar.

 - intel_pstate driver fixes from Dirk Brandewie and Konrad Rzeszutek
   Wilk.

 - New ACPI suspend blacklist entry for Sony Vaio VGN-FW21M from Fabio
   Valentini.

 - ACPI Platform Error Interface (APEI) fix from Chen Gong.

 - PCI root bridge hotplug locking fix from Yinghai Lu.

* tag 'pm+acpi-3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI / ACPI: hold acpi_scan_lock during root bus hotplug
  ACPI / APEI: fix error status check condition for CPER
  ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21M
  cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init()
  cpufreq: stats: do cpufreq_cpu_put() corresponding to cpufreq_cpu_get()
  intel-pstate: Use #defines instead of hard-coded values.
  cpufreq / intel_pstate: Fix calculation of current frequency
  cpufreq / intel_pstate: Add function to check that all MSRs are valid

Pull crypto fixes from Herbert Xu:
 "This removes IPsec ESN support from the talitos/caam drivers since
  they were implemented incorrectly, causing interoperability problems
  if ESN is used with them."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  Revert "crypto: caam - add IPsec ESN support"
  Revert "crypto: talitos - add IPsec ESN support"

Pull arm64 fix from Catalin Marinas:
 "Fix IS_ENABLED() usage typo (missing CONFIG_ prefix)."

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  ARM64: early_printk: Fix check for CONFIG_ARM64_64K_PAGES

Pull fbdev fixes from Tomi Valkeinen:
 "Since Florian is still away/inactive, I volunteered to collect fbdev
  fixes for 3.9 and changes for 3.10.  I didn't receive any other fbdev
  fixes than OMAP yet, but I didn't want to delay this further as
  there's a compilation fix for OMAP1.  So there could be still some
  fbdev fixes on the way a bit later.

  This contains:

   - Fix OMAP1 compilation
   - OMAP display fixes"

* tag 'fbdev-fixes-3.9-rc4' of git://gitorious.org/linux-omap-dss2/linux:
  omapdss: features: fix supported outputs for OMAP4
  OMAPDSS: tpo-td043 panel: fix data passing between SPI/DSS parts
  omapfb: fix broken build on OMAP1

Pull userns fixes from Eric W Biederman:
 "The bulk of the changes are fixing the worst consequences of the user
  namespace design oversight in not considering what happens when one
  namespace starts off as a clone of another namespace, as happens with
  the mount namespace.

  The rest of the changes are just plain bug fixes.

  Many thanks to Andy Lutomirski for pointing out many of these issues."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns: Restrict when proc and sysfs can be mounted
  ipc: Restrict mounting the mqueue filesystem
  vfs: Carefully propogate mounts across user namespaces
  vfs: Add a mount flag to lock read only bind mounts
  userns:  Don't allow creation if the user is chrooted
  yama:  Better permission check for ptraceme
  pid: Handle the exit of a multi-threaded init.
  scm: Require CAP_SYS_ADMIN over the current pidns to spoof pids.

* acpi-fixes:
  PCI / ACPI: hold acpi_scan_lock during root bus hotplug
  ACPI / APEI: fix error status check condition for CPER
  ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21M

* pm-fixes:
  cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init()
  cpufreq: stats: do cpufreq_cpu_put() corresponding to cpufreq_cpu_get()
  intel-pstate: Use #defines instead of hard-coded values.
  cpufreq / intel_pstate: Fix calculation of current frequency
  cpufreq / intel_pstate: Add function to check that all MSRs are valid

Pull powerpc build fixes from Stephen Rothwell:
 "Just a couple of build fixes for powerpc all{mod,yes}config.

  Submitted by me since BenH is on vacation."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
  powerpc: define the conditions where the ePAPR idle hcall can be supported
  powerpc: make additional room in exception vector area

Merge tag 'stable/for-linus-3.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 "This is mostly just the last stragglers of the regression bugs that
  this merge window had.  There are also two bug-fixes: one that adds an
  extra layer of security, and a regression fix for a change that was
  added in v3.7 (the v1 was faulty, the v2 works).

   - Regression fixes for C-and-P states not being parsed properly.
   - Fix possible security issue with guests triggering DoS via
     non-assigned MSI-Xs.
   - Fix regression (introduced in v3.7) with raising an event (v2).
   - Fix hastily introduced band-aid during c0 for the CR3 blowup."

* tag 'stable/for-linus-3.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/events: avoid race with raising an event in unmask_evtchn()
  xen/mmu: Move the setting of pvops.write_cr3 to later phase in bootup.
  xen/acpi-stub: Disable it b/c the acpi_processor_add is no longer called.
  xen-pciback: notify hypervisor about devices intended to be assigned to guests
  xen/acpi-processor: Don't dereference struct acpi_processor on all CPUs.

Pull HID fixes from Jiri Kosina:

 - fix for potential 3.9 regression in handling of buttons for touchpads
   following HID mt specification; potential because reportedly there is
   no retail product on the market that would be using this feature, but
   nevertheless we'd better follow the spec.  Fix by Benjamin Tissoires.

 - support for two quirky devices added by Josh Boyer.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: multitouch: fix touchpad buttons
  HID: usbhid: fix build problem
  HID: usbhid: quirk for MSI GX680R led panel
  HID: usbhid: quirk for Realtek Multi-card reader

Pull IOMMU fixes from Joerg Roedel:
 "Here are some fixes which have collected since Linux v3.9-rc1.

  The most important one fixes a long-standing regressen which make
  re-hotplugged devices unusable when AMD IOMMU is used.

  The other patches fix build issues (build regression on OMAP and a
  section mismatch).  One patch just removes a duplicate header include."

* tag 'iommu-fixes-v3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Make sure dma_ops are set for hotplug devices
  x86, io_apic: remove duplicated include from irq_remapping.c
  iommu: OMAP: build only on OMAP2+
  amd_iommu_init: remove __init from amd_iommu_erratum_746_workaround

Commit 06ae43f3 ("Don't bother with redoing rw_verify_area() from
default_file_splice_from()") lost the checks to test existence of the
write/aio_write methods.  My apologies ;-/

Eventually, we want that in fs/splice.c side of things (no point
repeating it for every buffer, after all), but for now this is the
obvious minimal fix.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In unmask_evtchn(), when the mask bit is cleared after testing for
pending and the event becomes pending between the test and clear, then
the upcall will not become pending and the event may be lost or
delayed.

Avoid this by always clearing the mask bit before checking for
pending.  If a hypercall is needed, remask the event as
EVTCHNOP_unmask will only retrigger pending events if they were
masked.

This fixes a regression introduced in 3.7 by
b5e57923 (xen/events: fix
unmask_evtchn for PV on HVM guests) which reordered the clear mask and
check pending operations.

Changes in v2:
- set mask before hypercall.

Cc: stable@vger.kernel.org
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We move the setting of write_cr3 from the early bootup variant
(see git commit 0cc9129d
"x86-64, xen, mmu: Provide an early version of write_cr3.")
to a more appropiate location.

This new location sets all of the other non-early variants
of pvops calls - and most importantly is before the
alternative_asm mechanism kicks in.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

With the Xen ACPI stub code (CONFIG_XEN_STUB=y) enabled, the power
C and P states are no longer uploaded to the hypervisor.

The reason is that the Xen CPU hotplug code: xen-acpi-cpuhotplug.c
and the xen-acpi-stub.c register themselves as the "processor" type object.

That means the generic processor (processor_driver.c) stops
working and it does not call (acpi_processor_add) which populates the

         per_cpu(processors, pr->id) = pr;

structure. The 'pr' is gathered from the acpi_processor_get_info function
which does the job of finding the C-states and figuring out PBLK address.

The 'processors->pr' is then later used by xen-acpi-processor.c (the one that
uploads C and P states to the hypervisor). Since it is NULL, we end
skip the gathering of _PSD, _PSS, _PCT, etc and never upload the power
management data.

The end result is that enabling the CONFIG_XEN_STUB in the build means that
xen-acpi-processor is not working anymore.

This temporary patch fixes it by marking the XEN_STUB driver as
BROKEN until this can be properly fixed.

CC: jinsong.liu@intel.com
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Only allow unprivileged mounts of proc and sysfs if they are already
mounted when the user namespace is created.

proc and sysfs are interesting because they have content that is
per namespace, and so fresh mounts are needed when new namespaces
are created while at the same time proc and sysfs have content that
is shared between every instance.

Respect the policy of who may see the shared content of proc and sysfs
by only allowing new mounts if there was an existing mount at the time
the user namespace was created.

In practice there are only two interesting cases: proc and sysfs are
mounted at their usual places, proc and sysfs are not mounted at all
(some form of mount namespace jail).

Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Only allow mounting the mqueue filesystem if the caller has CAP_SYS_ADMIN
rights over the ipc namespace.   The principle here is if you create
or have capabilities over it you can mount it, otherwise you get to live
with what other people have mounted.

This information is not particularly sensitive and mqueue essentially
only reports which posix messages queues exist.  Still when creating a
restricted environment for an application to live any extra
information may be of use to someone with sufficient creativity.  The
historical if imperfect way this information has been restricted has
been not to allow mounts and restricting this to ipc namespace
creators maintains the spirit of the historical restriction.

Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

As a matter of policy MNT_READONLY should not be changable if the
original mounter had more privileges than creator of the mount
namespace.

Add the flag CL_UNPRIVILEGED to note when we are copying a mount from
a mount namespace that requires more privileges to a mount namespace
that requires fewer privileges.

When the CL_UNPRIVILEGED flag is set cause clone_mnt to set MNT_NO_REMOUNT
if any of the mnt flags that should never be changed are set.

This protects both mount propagation and the initial creation of a less
privileged mount namespace.

Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

When a read-only bind mount is copied from mount namespace in a higher
privileged user namespace to a mount namespace in a lesser privileged
user namespace, it should not be possible to remove the the read-only
restriction.

Add a MNT_LOCK_READONLY mount flag to indicate that a mount must
remain read-only.

CC: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Guarantee that the policy of which files may be access that is
established by setting the root directory will not be violated
by user namespaces by verifying that the root directory points
to the root of the mount namespace at the time of user namespace
creation.

Changing the root is a privileged operation, and as a matter of policy
it serves to limit unprivileged processes to files below the current
root directory.

For reasons of simplicity and comprehensibility the privilege to
change the root directory is gated solely on the CAP_SYS_CHROOT
capability in the user namespace.  Therefore when creating a user
namespace we must ensure that the policy of which files may be access
can not be violated by changing the root directory.

Anyone who runs a processes in a chroot and would like to use user
namespace can setup the same view of filesystems with a mount
namespace instead.  With this result that this is not a practical
limitation for using user namespaces.

Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Commit "HID: multitouch: use the callback "report" instead..." breaks the
buttons of touchpads following the HID multitouch specification.
The buttons were emmitted through hid-input, but as now the events
are generated only in hid-multitouch, the buttons are not emmitted anymore.

The input_event() call is far much simpler than the hid-input one as
many of the different tests do not apply to multitouch touchpads.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

There is a bug introduced with commit 27c2127 that causes
devices which are hot unplugged and then hot-replugged to
not have per-device dma_ops set. This causes these devices
to not function correctly. Fixed with this patch.

Cc: stable@vger.kernel.org
Reported-by: Andreas Degert <andreas.degert@googlemail.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>

Pull vfs fixes from Al Viro:
 "stable fodder; assorted deadlock fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vt: synchronize_rcu() under spinlock is not nice...
  Nest rename_lock inside vfsmount_lock
  Don't bother with redoing rw_verify_area() from default_file_splice_from()

vcs_poll_data_free() calls unregister_vt_notifier(), which calls
atomic_notifier_chain_unregister(), which calls synchronize_rcu().
Do it *after* we'd dropped ->f_lock.

Cc: stable@vger.kernel.org (all kernels since 2.6.37)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

During merging the PCI tree with the PM/ACPI tree, Linus noticed
that we don't use the same lock using patten about ACPI PCI root as
acpiphp.

Here apply the same locking patten, and we need to execute
acpi_bus_hot_remove_device() via acpi_os_hotplug_execute()
as it also holds acpi_scan_lock.

[rjw: Changelog]
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
No-objection-from: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In Table 18-289, ACPI5.0 SPEC, the error data length in CPER
Generic Error Data Entry can be 0, which means this generic
error data entry can have only one header. So fix the check
conditon for it.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add Sony Vaio VGN-FW21M to the device blacklist in
drivers/acpi/sleep.c.

Fixes suspend/resume on this device (device no longer reboots
instead of resuming).

References: https://bugzilla.kernel.org/show_bug.cgi?id=55001Signed-off-by: Fabio Valentini <fafatheone@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

... lest we get livelocks between path_is_under() and d_path() and friends.

The thing is, wrt fairness lglocks are more similar to rwsems than to rwlocks;
it is possible to have thread B spin on attempt to take lock shared while thread
A is already holding it shared, if B is on lower-numbered CPU than A and there's
a thread C spinning on attempt to take the same lock exclusive.

As the result, we need consistent ordering between vfsmount_lock (lglock) and
rename_lock (seq_lock), even though everything that takes both is going to take
vfsmount_lock only shared.
Spotted-by: Brad Spengler <spender@grsecurity.net>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull networking fixes from David Miller:

 1) Always increment IPV4 ID field in encapsulated GSO packets, even
    when DF is set.  Regression fix from Pravin B Shelar.

 2) Fix per-net subsystem initialization in netfilter conntrack,
    otherwise we may access dynamically allocated memory before it is
    actually allocated.  From Gao Feng.

 3) Fix DMA buffer lengths in iwl3945 driver, from Stanislaw Gruszka.

 4) Fix race between submission of sync vs async commands in mwifiex
    driver, from Amitkumar Karwar.

 5) Add missing cancel of command timer in mwifiex driver, from Bing
    Zhao.

 6) Missing SKB free in rtlwifi USB driver, from Jussi Kivilinna.

 7) Thermal layer tries to use a genetlink multicast string that is
    longer than the 16 character limit.  Fix it and add a BUG check to
    prevent this kind of thing from happening in the future.

 From Masatake YAMATO.

 8) Fix many bugs in the handling of the teardown of L2TP connections,
    UDP encapsulation instances, and sockets.  From Tom Parkin.

 9) Missing socket release in IRDA, from Kees Cook.

10) Fix fec driver modular build, from Fabio Estevam.

11) Erroneous use of kfree() instead of free_netdev() in lantiq_etop,
    from Wei Yongjun.

12) Fix bugs in handling of queue numbers and steering rules in mlx4
    driver, from Moshe Lazer, Hadar Hen Zion, and Or Gerlitz.

13) Some FOO_DIAG_MAX constants were defined off by one, fix from Andrey
    Vagin.

14) TCP segmentation deferral is unintentionally done too strongly,
    breaking ACK clocking.  Fix from Eric Dumazet.

15) net_enable_timestamp() can legitimately be invoked from software
    interrupts, and in a way that is safe, so remove the WARN_ON().
    Also from Eric Dumazet.

16) Fix use after free in VLANs, from Cong Wang.

17) Fix TCP slow start retransmit storms after SACK reneging, from
    Yuchung Cheng.

18) Unix socket release should mark a socket dead before NULL'ing out
    sock->sk, otherwise we can race.  Fix from Paul Moore.

19) IPV6 addrconf code can try to free static memory, from Hong Zhiguo.

20) Fix register mis-programming, NULL pointer derefs, and wrong PHC
    clock frequency in IGB driver.  From Lior LevyAlex Williamson, Jiri
    Benc, and Jeff Kirsher.

21) skb->ip_summed logic in pch_gbe driver is reversed, breaking packet
    forwarding.  Fix from Veaceslav Falico.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  ipv4: Fix ip-header identification for gso packets.
  bonding: remove already created master sysfs link on failure
  af_unix: dont send SCM_CREDENTIAL when dest socket is NULL
  pch_gbe: fix ip_summed checksum reporting on rx
  igb: fix PHC stopping on max freq
  igb: make sensor info static
  igb: SR-IOV init reordering
  igb: Fix null pointer dereference
  igb: fix i350 anti spoofing config
  ixgbevf: don't release the soft entries
  ipv6: fix bad free of addrconf_init_net
  unix: fix a race condition in unix_release()
  tcp: undo spurious timeout after SACK reneging
  bnx2x: fix assignment of signed expression to unsigned variable
  bridge: fix crash when set mac address of br interface
  8021q: fix a potential use-after-free
  net: remove a WARN_ON() in net_enable_timestamp()
  tcp: preserve ACK clocking in TSO
  net: fix *_DIAG_MAX constants
  net/mlx4_core: Disallow releasing VF QPs which have steering rules
  ...

Pull NFS client bugfixes from Trond Myklebust:
 - Fix an NFSv4 idmapper regression
 - Fix an Oops in the pNFS blocks client
 - Fix up various issues with pNFS layoutcommit
 - Ensure correct read ordering of variables in
   rpc_wake_up_task_queue_locked

* tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked
  NFSv4.1: Add a helper pnfs_commit_and_return_layout
  NFSv4.1: Always clear the NFS_INO_LAYOUTCOMMIT in layoutreturn
  NFSv4.1: Fix a race in pNFS layoutcommit
  pnfs-block: removing DM device maybe cause oops when call dev_remove
  NFSv4: Fix the string length returned by the idmapper

Change the permission check for yama_ptrace_ptracee to the standard
ptrace permission check, testing if the traceer has CAP_SYS_PTRACE
in the tracees user namespace.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

ip-header id needs to be incremented even if IP_DF flag is set.
This behaviour was changed in commit 490ab081
(IP_GRE: Fix IP-Identification).

Following patch fixes it so that identification is always
incremented.
Reported-by: Cong Wang <amwang@redhat.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If slave sysfs symlink failes to be created - we end up without removing
the master sysfs symlink. Remove it in case of failure.
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SCM_SCREDENTIALS should apply to write() syscalls only either source or destination
socket asserted SOCK_PASSCRED. The original implememtation in maybe_add_creds is wrong,
and breaks several LSB testcases ( i.e. /tset/LSB.os/netowkr/recvfrom/T.recvfrom).
Origionally-authored-by: Karel Srot <ksrot@redhat.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
This series contains updates to ixgbevf and igb.

The ixgbevf calls to pci_disable_msix() and to free the msix_entries
memory should not occur if device open fails.  Instead they should be
called during device driver removal to balance with the call to
pci_enable_msix() and the call to allocate msix_entries memory
during the device probe and driver load.

The remaining 4 of 5 igb patches are simple 1-3 line patches to fix
several issues such as possible null pointer dereference, PHC stopping
on max frequency, make sensor info static and SR-IOV initialization
reordering.

The remaining igb patch to fix anti-spoofing config fixes a problem
in i350 where anti spoofing configuration was written into a wrong
register.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that
checksums were correct and CHECKSUM_NONE in any other case. They're
currently placed vice versa, which breaks the forwarding scenario. Fix it
by placing them as described above.
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Joerg Roedel <joro@8bytes.org>

When a multi-threaded init exits and the initial thread is not the
last thread to exit the initial thread hangs around as a zombie
until the last thread exits.  In that case zap_pid_ns_processes
needs to wait until there are only 2 hashed pids in the pid
namespace not one.

v2. Replace thread_pid_vnr(me) == 1 with the test thread_group_leader(me)
    as suggested by Oleg.

Cc: stable@vger.kernel.org
Cc: Oleg Nesterov <oleg@redhat.com>
Reported-by: Caj Larsson <caj@omnicloud.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

For 82576 MAC type, max_adj is reported as 1000000000 ppb. However, if
this value is passed to igb_ptp_adjfreq_82576, incvalue overflows out of
INCVALUE_82576_MASK, resulting in setting of zero TIMINCA.incvalue, stopping
the PHC (instead of going at twice the nominal speed).

Fix the advertised max_adj value to the largest value hardware can handle.
As there is no min_adj value available (-max_adj is used instead), this will
also prevent stopping the clock intentionally. It's probably not a big deal,
other igb MAC types don't support stopping the clock, either.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Trivial sparse warning.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>