- 28 Dec, 2022 4 commits
-
-
Vitaly Kuznetsov authored
hyperv_features test needs to set certain CPUID bits in Hyper-V feature leaves but instead of open coding this, common KVM_X86_CPU_FEATURE() infrastructure can be used. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20221013095849.705943-6-vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
It may not be clear what 'msr->available' means. The test actually checks that accessing the particular MSR doesn't cause #GP, rename the variable accordingly. While on it, use 'true'/'false' instead of '1'/'0' for 'write'/ 'fault_expected' as these are boolean. Signed-off-by:
-
Vitaly Kuznetsov authored
Normally, genuine Hyper-V doesn't expose architectural invariant TSC (CPUID.80000007H:EDX[8]) to its guests by default. A special PV MSR (HV_X64_MSR_TSC_INVARIANT_CONTROL, 0x40000118) and corresponding CPUID feature bit (CPUID.0x40000003.EAX[15]) were introduced. When bit 0 of the PV MSR is set, invariant TSC bit starts to show up in CPUID. When the feature is exposed to Hyper-V guests, reenlightenment becomes unneeded. Add the feature to KVM. Keep CPUID output intact when the feature wasn't exposed to L1 and implement the required logic for hiding invariant TSC when the feature was exposed and invariant TSC control MSR wasn't written to. Copy genuine Hyper-V behavior and forbid to disable the feature once it was enabled. For the reference, for linux guests, support for the feature was added in commit dce7cd62 ("x86/hyperv: Allow guests to enable InvariantTSC"). Signed-off-by:
-
Vitaly Kuznetsov authored
CPUID_8000_0007_EDX may come handy when X86_FEATURE_CONSTANT_TSC needs to be checked. No functional change intended. Signed-off-by:
-
- 27 Dec, 2022 36 commits
-
-
Vitaly Kuznetsov authored
Avoid open coding BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL by adding a dedicated define. While there's only one user at this moment, the upcoming KVM implementation of Hyper-V Invariant TSC feature will need to use it as well. Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
Sean Christopherson authored
When handling direct page faults, pivot on the TDP MMU being globally enabled instead of checking if the target MMU is a TDP MMU. Now that the TDP MMU is all-or-nothing, if the TDP MMU is enabled, KVM will reach direct_page_fault() if and only if the MMU is a TDP MMU. When TDP is enabled (obviously required for the TDP MMU), only non-nested TDP page faults reach direct_page_fault(), i.e. nonpaging MMUs are impossible, as NPT requires paging to be enabled and EPT faults use ept_page_fault(). Signed-off-by:
-
Sean Christopherson authored
Simplify and optimize the logic for detecting if the current/active MMU is a TDP MMU. If the TDP MMU is globally enabled, then the active MMU is a TDP MMU if it is direct. When TDP is enabled, so called nonpaging MMUs are never used as the only form of shadow paging KVM uses is for nested TDP, and the active MMU can't be direct in that case. Rename the helper and take the vCPU instead of an arbitrary MMU, as nonpaging MMUs can show up in the walk_mmu if L1 is using nested TDP and L2 has paging disabled. Taking the vCPU has the added bonus of cleaning up the callers, all of which check the current MMU but wrap code that consumes the vCPU. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use is_tdp_mmu_page() instead of querying sp->tdp_mmu_page directly so that all users benefit if KVM ever finds a way to optimize the logic. No functional change intended. Signed-off-by:
-
David Matlack authored
Rename __direct_map() to direct_map() since the leading underscores are unnecessary. This also makes the page fault handler names more consistent: kvm_tdp_mmu_page_fault() calls kvm_tdp_mmu_map() and direct_page_fault() calls direct_map(). Opportunistically make some trivial cleanups to comments that had to be modified anyway since they mentioned __direct_map(). Specifically, use "()" when referring to functions, and include kvm_tdp_mmu_map() among the various callers of disallowed_hugepage_adjust(). No functional change intended. Signed-off-by:
David Matlack <dmatlack@google.com> Reviewed-by:
Isaku Yamahata <isaku.yamahata@intel.com> Signed-off-by:
-
David Matlack authored
Stop calling make_mmu_pages_available() when handling TDP MMU faults. The TDP MMU does not participate in the "available MMU pages" tracking and limiting so calling this function is unnecessary work when handling TDP MMU faults. Signed-off-by:
-
David Matlack authored
Split out the page fault handling for the TDP MMU to a separate function. This creates some duplicate code, but makes the TDP MMU fault handler simpler to read by eliminating branches and will enable future cleanups by allowing the TDP MMU and non-TDP MMU fault paths to diverge. Only compile in the TDP MMU fault handler for 64-bit builds since kvm_tdp_mmu_map() does not exist in 32-bit builds. No functional change intended. Signed-off-by:
-
David Matlack authored
Move the initialization of fault.{gfn,slot} earlier in the page fault handling code for fully direct MMUs. This will enable a future commit to split out TDP MMU page fault handling without needing to duplicate the initialization of these 2 fields. Opportunistically take advantage of the fact that fault.gfn is initialized in kvm_tdp_page_fault() rather than recomputing it from fault->addr. No functional change intended. Signed-off-by: -
David Matlack authored
Handle faults on GFNs that do not have a backing memslot in kvm_faultin_pfn() and drop handle_abnormal_pfn(). This eliminates duplicate code in the various page fault handlers. Opportunistically tweak the comment about handling gfn > host.MAXPHYADDR to reflect that the effect of returning RET_PF_EMULATE at that point is to avoid creating an MMIO SPTE for such GFNs. No functional change intended. Signed-off-by:
-
David Matlack authored
Pass the kvm_page_fault struct down to kvm_handle_error_pfn() to avoid a memslot lookup when handling KVM_PFN_ERR_HWPOISON. Opportunistically move the gfn_to_hva_memslot() call and @current down into kvm_send_hwpoison_signal() to cut down on line lengths. No functional change intended. Signed-off-by:
-
David Matlack authored
Handle error PFNs in kvm_faultin_pfn() rather than relying on the caller to invoke handle_abnormal_pfn() after kvm_faultin_pfn(). Opportunistically rename kvm_handle_bad_page() to kvm_handle_error_pfn() to make it more consistent with is_error_pfn(). This commit moves KVM closer to being able to drop handle_abnormal_pfn(), which will reduce the amount of duplicate code in the various page fault handlers. No functional change intended. Signed-off-by:
-
David Matlack authored
Grab mmu_invalidate_seq in kvm_faultin_pfn() and stash it in struct kvm_page_fault. The eliminates duplicate code and reduces the amount of parameters needed for is_page_fault_stale(). Preemptively split out __kvm_faultin_pfn() to a separate function for use in subsequent commits. No functional change intended. Signed-off-by:
-
David Matlack authored
Move kvm_mmu_{init,uninit}_tdp_mmu() behind tdp_mmu_enabled. This makes these functions consistent with the rest of the calls into the TDP MMU from mmu.c, and which is now possible since tdp_mmu_enabled is only modified when the x86 vendor module is loaded. i.e. It will never change during the lifetime of a VM. This change also enabled removing the stub definitions for 32-bit KVM, as the compiler will just optimize the calls out like it does for all the other TDP MMU functions. No functional change intended. Signed-off-by: -
David Matlack authored
Change tdp_mmu to a read-only parameter and drop the per-vm tdp_mmu_enabled. For 32-bit KVM, make tdp_mmu_enabled a macro that is always false so that the compiler can continue omitting cals to the TDP MMU. The TDP MMU was introduced in 5.10 and has been enabled by default since 5.15. At this point there are no known functionality gaps between the TDP MMU and the shadow MMU, and the TDP MMU uses less memory and scales better with the number of vCPUs. In other words, there is no good reason to disable the TDP MMU on a live system. Purposely do not drop tdp_mmu=N support (i.e. do not force 64-bit KVM to always use the TDP MMU) since tdp_mmu=N is still used to get test coverage of KVM's shadow MMU TDP support, which is used in 32-bit KVM. Signed-off-by:
Kai Huang <kai.huang@intel.com> Signed-off-by:
-
Thomas Huth authored
Let's add some output here so that the user has some feedback about what is being run. Signed-off-by:
Thomas Huth <thuth@redhat.com> Message-Id: <20221004093131.40392-4-thuth@redhat.com> Signed-off-by:
-
Thomas Huth authored
The kvm_binary_stats_test test currently does not have any output (unless one of the TEST_ASSERT statement fails), so it's hard to say for a user how far it did proceed already. Thus let's make this a little bit more user-friendly and include some TAP output via the kselftest.h interface. Signed-off-by:
Andrew Jones <andrew.jones@linux.dev> Message-Id: <20221004093131.40392-2-thuth@redhat.com> Signed-off-by:
-
Lai Jiangshan authored
Since the commit 65855ed8 ("KVM: X86: Synchronize the shadow pagetable before link it"), no sp would be linked with sp->unsync_children = 1. So make it WARN if it is the case. Signed-off-by:
Lai Jiangshan <jiangshan.ljs@antgroup.com> Message-Id: <20221212090106.378206-1-jiangshanlai@gmail.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Commit 9bcb9065 ("KVM: VMX: Get rid of eVMCS specific VMX controls sanitization") dropped 'vmcs_conf' sanitization for KVM-on-Hyper-V because there's no known Hyper-V version which would expose a feature unsupported in eVMCS in VMX feature MSRs. This works well for all currently existing Hyper-V version, however, future Hyper-V versions may add features which are supported by KVM and are currently missing in eVMCSv1 definition (e.g. APIC virtualization, PML,...). When this happens, existing KVMs will get broken. With the inverted 'unsupported by eVMCSv1' checks, we can resurrect vmcs_conf sanitization and make KVM future proof. Signed-off-by:
-
Vitaly Kuznetsov authored
In preparation to restoring vmcs_conf sanitization for KVM-on-Hyper-V, (and for completeness) add tertiary VM-execution controls to 'evmcs_supported_ctrls'. No functional change intended as KVM doesn't yet expose MSR_IA32_VMX_PROCBASED_CTLS3 to its guests. Signed-off-by:
-
Vitaly Kuznetsov authored
When a new feature gets implemented in KVM, EVMCS1_UNSUPPORTED_* defines need to be adjusted to avoid the situation when the feature is exposed to the guest but there's no corresponding eVMCS field[s] for it. This is not obvious and fragile. Invert 'unsupported by eVMCSv1' check and make it 'supported by eVMCSv1' instead, this way it's much harder to make a mistake. New features will get added to EVMCS1_SUPPORTED_* defines when the corresponding fields are added to eVMCS definition. No functional change intended. EVMCS1_SUPPORTED_* defines are composed by taking KVM_{REQUIRED,OPTIONAL}_VMX_ defines and filtering out what was previously known as EVMCS1_UNSUPPORTED_*. From all the controls, SECONDARY_EXEC_TSC_SCALING requires special handling as it's actually present in eVMCSv1 definition but is not currently supported for Hyper-V-on-KVM, just for KVM-on-Hyper-V. As evmcs_supported_ctrls will be used for both scenarios, just add it there instead of EVMCS1_SUPPORTED_2NDEXEC. Signed-off-by: -
Vitaly Kuznetsov authored
The only unsupported primary processor-based VM-execution control at the moment is CPU_BASED_ACTIVATE_TERTIARY_CONTROLS and KVM doesn't expose it in nested VMX feature MSRs anyway (see nested_vmx_setup_ctls_msrs()) but in preparation to inverting "unsupported with eVMCS" checks (and for completeness) it's better to sanitize MSR_IA32_VMX_PROCBASED_CTLS/ MSR_IA32_VMX_TRUE_PROCBASED_CTLS too. No functional change intended. Signed-off-by:
-
David Woodhouse authored
Most notably, the KVM_XEN_EVTCHN_RESET feature had escaped documentation entirely. Along with how to turn most stuff off on SHUTDOWN_soft_reset. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-6-dwmw2@infradead.org> Signed-off-by:
-
David Woodhouse authored
These are (uint64_t)-1 magic values are a userspace ABI, allowing the shared info pages and other enlightenments to be disabled. This isn't a Xen ABI because Xen doesn't let the guest turn these off except with the full SHUTDOWN_soft_reset mechanism. Under KVM, the userspace VMM is expected to handle soft reset, and tear down the kernel parts of the enlightenments accordingly. Suggested-by:
-
Michal Luczaj authored
Port number is validated in kvm_xen_setattr_evtchn(). Remove superfluous checks in kvm_xen_eventfd_assign() and kvm_xen_eventfd_update(). Signed-off-by:
Michal Luczaj <mhal@rbox.co> Message-Id: <20221222203021.1944101-3-mhal@rbox.co> Signed-off-by:
-
Paolo Bonzini authored
The evtchnfd structure itself must be protected by either kvm->lock or SRCU. Use the former in kvm_xen_eventfd_update(), since the lock is being taken anyway; kvm_xen_hcall_evtchn_send() instead is a reader and does not need kvm->lock, and is called in SRCU critical section from the kvm_x86_handle_exit function. It is also important to use rcu_read_{lock,unlock}() in kvm_xen_hcall_evtchn_send(), because idr_remove() will *not* use synchronize_srcu() to wait for readers to complete. Remove a superfluous if (kvm) check before calling synchronize_srcu() in kvm_xen_eventfd_deassign() where kvm has been dereferenced already. Co-developed-by: -
David Woodhouse authored
In particular, we shouldn't assume that being contiguous in guest virtual address space means being contiguous in guest *physical* address space. In dropping the manual calls to kvm_mmu_gva_to_gpa_system(), also drop the srcu_read_lock() that was around them. All call sites are reached from kvm_xen_hypercall() which is called from the handle_exit function with the read lock already held. 53639526 ("KVM: x86/xen: handle PV timers oneshot mode") 1a65105a ("KVM: x86/xen: handle PV spinlocks slowpath") Fixes: 2fd6df2f ("KVM: x86/xen: intercept EVTCHNOP_send from guests") Signed-off-by: -
Michal Luczaj authored
Release page irrespectively of kvm_vcpu_write_guest() return value. Suggested-by:
Paul Durrant <paul@xen.org> Fixes: 23200b7a ("KVM: x86/xen: intercept xen hypercalls if enabled") Signed-off-by:
-
Sean Christopherson authored
Delete an extra block of code/documentation that snuck in when KVM's documentation was converted to ReST format. Fixes: 106ee47d ("docs: kvm: Convert api.txt to ReST format") Signed-off-by:
-
Lai Jiangshan authored
"be split be split" -> "be split" Signed-off-by:
-
Lai Jiangshan authored
No code is using KVM_MMU_READ_LOCK() or KVM_MMU_READ_UNLOCK(). They used to be in virt/kvm/pfncache.c: KVM_MMU_READ_LOCK(kvm); retry = mmu_notifier_retry_hva(kvm, mmu_seq, uhva); KVM_MMU_READ_UNLOCK(kvm); However, since 58cd407c ("KVM: Fix multiple races in gfn=>pfn cache refresh", 2022-05-25) the code is only relying on the MMU notifier's invalidation count and sequence number. Signed-off-by: -
Lukas Bulwahn authored
Commit a789aeba ("KVM: VMX: Rename "vmx/evmcs.{ch}" to "vmx/hyperv.{ch}"") renames the VMX specific Hyper-V files, but does not adjust the entry in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in KVM X86 HYPER-V (KVM/hyper-v). Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Fixes: a789aeba ("KVM: VMX: Rename "vmx/evmcs.{ch}" to "vmx/hyperv.{ch}"") Reviewed-by:
-
Oliver Upton authored
The loop marks vaddr as mapped after incrementing it by page size, thereby marking the *next* page as mapped. Set the bit in vpages_mapped first instead. Fixes: 56fc7732 ("KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too") Signed-off-by:
Oliver Upton <oliver.upton@linux.dev> Message-Id: <20221209015307.1781352-4-oliver.upton@linux.dev> Signed-off-by:
-
Oliver Upton authored
Currently the ucall MMIO hole is placed immediately after slot0, which is a relatively safe address in the PA space. However, it is possible that the same address has already been used for something else (like the guest program image) in the VA space. At least in my own testing, building the vgic_irq test with clang leads to the MMIO hole appearing underneath gicv3_ops. Stop identity mapping the MMIO hole and instead find an unused VA to map to it. Yet another subtle detail of the KVM selftests library is that virt_pg_map() does not update vm->vpages_mapped. Switch over to virt_map() instead to guarantee that the chosen VA isn't to something else. Signed-off-by:
-
Paolo Bonzini authored
Explain the meaning of the bit manipulations of vm_vaddr_populate_bitmap. These correspond to the "canonical addresses" of x86 and other architectures, but that is not obvious. Signed-off-by: -
Sean Christopherson authored
Use a magic value to signal a ucall_alloc() failure instead of simply doing GUEST_ASSERT(). GUEST_ASSERT() relies on ucall_alloc() and so a failure puts the guest into an infinite loop. Use -1 as the magic value, as a real ucall struct should never wrap. Reported-by:
-
Sean Christopherson authored
Disable gnu-variable-sized-type-not-at-end so that tests and libraries can create overlays of variable sized arrays at the end of structs when using a fixed number of entries, e.g. to get/set a single MSR. It's possible to fudge around the warning, e.g. by defining a custom struct that hardcodes the number of entries, but that is a burden for both developers and readers of the code. lib/x86_64/processor.c:664:19: warning: field 'header' with variable sized type 'struct kvm_msrs' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct kvm_msrs header; ^ lib/x86_64/processor.c:772:19: warning: field 'header' with variable sized type 'struct kvm_msrs' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct kvm_msrs header; ^ lib/x86_64/processor.c:787:19: warning: field 'header' with variable sized type 'struct kvm_msrs' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct kvm_msrs header; ^ 3 warnings generated. x86_64/hyperv_tlb_flush.c:54:18: warning: field 'hv_vp_set' with variable sized type 'struct hv_vpset' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct hv_vpset hv_vp_set; ^ 1 warning generated. x86_64/xen_shinfo_test.c:137:25: warning: field 'info' with variable sized type 'struct kvm_irq_routing' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct kvm_irq_routing info; ^ 1 warning generated. Signed-off-by:
-
