- 01 Nov, 2023 27 commits
-
-
Xuan Zhuo authored
Some buggy devices, the common cfg size may not match the features. This patch checks the common cfg size for the features(VIRTIO_F_NOTIF_CONFIG_DATA, VIRTIO_F_RING_RESET). When the common cfg size does not match the corresponding feature, we fail the probe and print error message. Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by:
Jason Wang <jasowang@redhat.com> Message-Id: <20231019034902.7346-1-xuanzhuo@linux.alibaba.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
zhenwei pi authored
The following codes have an implicit conversion from size_t to u32: (u32)max_size = (size_t)virtio_max_dma_size(vdev); This may lead overflow, Ex (size_t)4G -> (u32)0. Once virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX instead. Signed-off-by:
zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com> Signed-off-by:
-
Xuan Zhuo authored
Add checks to the check_offsets(void) for queue_notify_data and queue_reset. Signed-off-by:
-
Xuan Zhuo authored
This patch adds the definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit in the relevant header file. This feature indicates that the driver uses the data provided by the device as a virtqueue identifier in available buffer notifications. It comes from here: https://github.com/oasis-tcs/virtio-spec/issues/89Signed-off-by: -
Greg Kroah-Hartman authored
Now that the driver core allows for struct class to be in read-only memory, we should make all 'class' structures declared at build time placing them into read-only memory, instead of having to be dynamically allocated at runtime. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Xie Yongji <xieyongji@bytedance.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Message-Id: <2023100643-tricolor-citizen-6c2d@gregkh> Signed-off-by:
Xie Yongji <xieyongji@bytedance.com> Acked-by:
-
Geert Uytterhoeven authored
Fix a misspelling of "preceding". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Message-Id: <b57b882675809f1f9dacbf42cf6b920b2bea9cba.1695903476.git.geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com>
-
Shannon Nelson authored
Finally following up to Simon's suggestion for some kdoc attention on struct virtio_pci_modern_device. Link: https://lore.kernel.org/netdev/ZE%2FQS0lnUvxFacjf@corigine.com/ Cc: Simon Horman <simon.horman@corigine.com> Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Acked-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230911213104.14391-1-shannon.nelson@amd.com> Signed-off-by:
-
Shawn.Shao authored
Fix the wrong drivers_autoprobe path name in the document Signed-off-by:
Shawn.Shao <shawn.shao@jaguarmicro.com> Message-Id: <20230821011535.1117-1-shawn.shao@jaguarmicro.com> Signed-off-by:
-
Dragos Tatulea authored
As Eli Cohen moved to other work, I'll be the contact point for mlx5_vdpa. Acked-by:
Dragos Tatulea <dtatulea@nvidia.com> Message-Id: <20230925160654.1558627-1-dtatulea@nvidia.com> Signed-off-by:
-
Xueshi Hu authored
After commit 68f2736a ("mm: Convert all PageMovable users to movable_operations"), the execution path has been changed to move_to_new_folio movable_operations->migrate_page balloon_page_migrate balloon_page_migrate->balloon_page_migrate balloon_page_migrate Correct the outdated comment. Signed-off-by:
Xueshi Hu <xueshi.hu@smartx.com> Message-Id: <20230813140709.835536-1-xueshi.hu@smartx.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
-
Eugenio Pérez authored
Offer this backend feature as mlx5 is compatible with it. It allows it to do live migration with CVQ, dynamically switching between passthrough and shadow virtqueue. Signed-off-by:
-
Dragos Tatulea authored
For the following sequence: - cvq group is in ASID 0 - .set_map(1, cvq_iotlb) - .set_group_asid(cvq_group, 1) ... the cvq mapping from ASID 0 will be used. This is not always correct behaviour. This patch adds support for the above mentioned flow by saving the iotlb on each .set_map and updating the cvq iotlb with it on a cvq group change. Acked-by:
Si-Wei Liu <si-wei.liu@oracle.com> Tested-by:
Lei Yang <leiyang@redhat.com>
-
Dragos Tatulea authored
They will be used in a follow-up patch. For dup_iotlb, avoid the src == dst case. This is an error. Acked-by:
-
Dragos Tatulea authored
Vq descriptor mappings are supported in hardware by filling in an additional mkey which contains the descriptor mappings to the hw vq. A previous patch in this series added support for hw mkey (mr) creation for ASID 1. This patch fills in both the vq data and vq descriptor mkeys based on group ASID mapping. The feature is signaled to the vdpa core through the presence of the .get_vq_desc_group op. Acked-by:
-
Dragos Tatulea authored
Introduce the vq descriptor group and mr per ASID. Until now .set_map on ASID 1 was only updating the cvq iotlb. From now on it also creates a mkey for it. The current patch doesn't use it but follow-up patches will add hardware support for mapping the vq descriptors. Acked-by:
-
Dragos Tatulea authored
The current flow for updating an mr works directly on mvdev->mr which makes it cumbersome to handle multiple new mr structs. This patch makes the flow more straightforward by having mlx5_vdpa_create_mr return a new mr which will update the old mr (if any). The old mr will be deleted and unlinked from mvdev. For the case when the iotlb is empty (not NULL), the old mr will be cleared. This change paves the way for adding mrs for different ASIDs. The initialized bool is no longer needed as mr is now a pointer in the mlx5_vdpa_dev struct which will be NULL when not initialized. Acked-by:
-
Dragos Tatulea authored
The mutex is named like it is supposed to protect only the mkey but in reality it is a global lock for all mr resources. Shift the mutex to it's rightful location (struct mlx5_vdpa_dev) and give it a more appropriate name. Signed-off-by:
-
Dragos Tatulea authored
This patch adapts the mr creation/deletion code to be able to work with any given mr struct pointer. All the APIs are adapted to take an extra parameter for the mr. mlx5_vdpa_create/delete_mr doesn't need a ASID parameter anymore. The check is done in the caller instead (mlx5_set_map). This change is needed for a followup patch which will introduce an additional mr for the vq descriptor data. Signed-off-by:
-
Dragos Tatulea authored
Make mlx5_destroy_mr symmetric to mlx5_create_mr. Acked-by:
-
Dragos Tatulea authored
Now that the cvq code is out of mlx5_vdpa_create/destroy_mr, the "dvq" functions can be folded into their callers. Having "dvq" in the naming will no longer be accurate in the downstream patches. Acked-by:
-
Dragos Tatulea authored
The reslock is taken while refresh is called but iommu_lock is more specific to this resource. So take the iommu_lock during cvq iotlb refresh. Based on Eugenio's patch [0]. [0] https://lore.kernel.org/lkml/20230112142218.725622-4-eperezma@redhat.com/Acked-by:
-
Dragos Tatulea authored
The handling of the cvq iotlb is currently coupled with the creation and destruction of the hardware mkeys (mr). This patch moves cvq iotlb handling into its own function and shifts it to a scope that is not related to mr handling. As cvq handling is just a prune_iotlb + dup_iotlb cycle, put it all in the same "update" function. Finally, the destruction path is handled by directly pruning the iotlb. After this move is done the ASID mr code can be collapsed into a single function. Acked-by:
-
Dragos Tatulea authored
Necessary for upcoming cvq separation from mr allocation. Acked-by:
-
Si-Wei Liu authored
With _F_DESC_ASID backend feature, the device can now support the VHOST_VDPA_GET_VRING_DESC_GROUP ioctl, and it may expose the descriptor table (including avail and used ring) in a different group than the buffers it contains. This new uAPI will fetch the group ID of the descriptor table. Signed-off-by:
-
Si-Wei Liu authored
Userspace knows if the device has dedicated descriptor group or not by checking this feature bit. It's only exposed if the vdpa driver backend implements the .get_vq_desc_group() operation callback. Userspace trying to negotiate this feature when it or the dependent _F_IOTLB_ASID feature hasn't been exposed will result in an error. Signed-off-by:
-
Si-Wei Liu authored
In some cases, the access to the virtqueue's descriptor area, device and driver areas (precluding indirect descriptor table in guest memory) may have to be confined to a different address space than where its buffers reside. Without loss of simplicity and generality with already established terminology, let's fold up these 3 areas and call them as a whole as descriptor table group, or descriptor group for short. Specifically, in case of split virtqueues, descriptor group consists of regions for Descriptor Table, Available Ring and Used Ring; for packed virtqueues layout, descriptor group contains Descriptor Ring, Driver and Device Event Suppression structures. The group ID for a dedicated descriptor group can be obtained through a new .get_vq_desc_group() op. If driver implements this op, it means that the descriptor, device and driver areas of the virtqueue may reside in a dedicated group than where its buffers reside, a.k.a the default virtqueue group through the .get_vq_group() op. In principle, the descriptor group may or may not have same group ID as the default group. Even if the descriptor group has a different ID, meaning the vq's descriptor group areas can optionally move to a separate address space than where guest memory resides, the descriptor group may still start from a default address space, same as where its buffers reside. To move the descriptor group to a different address space, .set_group_asid() has to be called to change the ASID binding for the group, which is no different than what needs to be done on any other virtqueue group. On the other hand, the .reset() semantics also applies on descriptor table group, meaning the device reset will clear all ASID bindings and move all virtqueue groups including descriptor group back to the default address space, i.e. in ASID 0. QEMU's shadow virtqueue is going to utilize dedicated descriptor group to speed up map and unmap operations, yielding tremendous downtime reduction by avoiding the full and slow remap cycle in SVQ switching. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.gitMichael S. Tsirkin authored
This merges a single commit that contains changes to mlx5_ifc.h It's required to support vq descriptor mappings in mlx5/vdpa Signed-off-by:
-
- 30 Oct, 2023 1 commit
-
-
Linus Torvalds authored
-
- 28 Oct, 2023 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull misc x86 fixes from Ingo Molnar: - Fix a possible CPU hotplug deadlock bug caused by the new TSC synchronization code - Fix a legacy PIC discovery bug that results in device troubles on affected systems, such as non-working keybards, etc - Add a new Intel CPU model number to <asm/intel-family.h> * tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Defer marking TSC unstable to a worker x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility x86/cpu: Add model number for Intel Arrow Lake mobile processor
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Ingo Molnar: "Restore unintentionally lost quirk settings in the GIC irqchip driver, which broke certain devices" * tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Don't override quirk settings with default values
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf event fix from Ingo Molnar: "Fix a potential NULL dereference bug" * tag 'perf-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix potential NULL deref
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - tracing/kprobes: Fix kernel-doc warnings for the variable length arguments - tracing/kprobes: Fix to count the symbols in modules even if the module name is not specified so that user can probe the symbols in the modules without module name * tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix symbol counting logic by looking at modules as well tracing/kprobes: Fix the description of variable length arguments
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fix from Christoph Hellwig: - reduce the initialy dynamic swiotlb size to remove an annoying but harmless warning from the page allocator (Petr Tesarik) * tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some very small driver fixes for 6.6-final that have shown up in the past two weeks. Included in here are: - tiny fastrpc bugfixes for reported errors - nvmem register fixes - iio driver fixes for some reported problems - fpga test fix - MAINTAINERS file update for fpga All of these have been in linux-next this week with no reported problems" * tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: fpga: Fix memory leak for fpga_region_test_class_find() fpga: m10bmc-sec: Change contact for secure update driver fpga: disable KUnit test suites when module support is enabled iio: afe: rescale: Accept only offset channels nvmem: imx: correct nregs for i.MX6ULL nvmem: imx: correct nregs for i.MX6UL nvmem: imx: correct nregs for i.MX6SLL misc: fastrpc: Unmap only if buffer is unmapped from DSP misc: fastrpc: Clean buffers on remote invocation failures misc: fastrpc: Free DMA handles for RPC calls with no arguments misc: fastrpc: Reset metadata buffer to avoid incorrect free iio: exynos-adc: request second interupt only when touchscreen mode is used iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds dt-bindings: iio: add missing reset-gpios constrain
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Bugfixes for Axxia when it is a target and for PEC handling of stm32f7. Plus, fix an OF node leak pattern in the mux subsystem" * tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: stm32f7: Fix PEC handling in case of SMBUS transfers i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node() i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node() i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node() i2c: aspeed: Fix i2c bus hang in slave read
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Three fixes, one for the clk framework and two for clk drivers: - Avoid an oops in possible_parent_show() by checking for no parent properly when a DT index based lookup is used - Handle errors returned from divider_ro_round_rate() in clk_stm32_composite_determine_rate() - Fix clk_ops::determine_rate() implementation of socfpga's gateclk_ops that was ruining uart output because the divider was forgotten about" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: stm32: Fix a signedness issue in clk_stm32_composite_determine_rate() clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name clk: socfpga: gate: Account for the divider in determine_rate -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc filesystem fixes from Al Viro: "Assorted fixes all over the place: literally nothing in common, could have been three separate pull requests. All are simple regression fixes, but not for anything from this cycle" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed sparc32: fix a braino in fault handling in csum_and_copy_..._user()
-
Andrii Nakryiko authored
Recent changes to count number of matching symbols when creating a kprobe event failed to take into account kernel modules. As such, it breaks kprobes on kernel module symbols, by assuming there is no match. Fix this my calling module_kallsyms_on_each_symbol() in addition to kallsyms_on_each_match_symbol() to perform a proper counting. Link: https://lore.kernel.org/all/20231027233126.2073148-1-andrii@kernel.org/ Cc: Francis Laniel <flaniel@linux.microsoft.com> Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Fixes: b022f0c7 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols") Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
Song Liu <song@kernel.org> Signed-off-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org>
-
Al Viro authored
Use of dget() after we'd dropped ->d_lock is too late - dentry might be gone by that point. Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
->ki_pos value is unreliable in such cases. For an obvious example, consider O_DSYNC write - we feed the data to page cache and start IO, then we make sure it's completed. Update of ->ki_pos is dealt with by the first part; failure in the second ends up with negative value returned _and_ ->ki_pos left advanced as if sync had been successful. In the same situation write(2) does not advance the file position at all. Reviewed-by:
Christian Brauner <brauner@kernel.org> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
