SYN-ACK responses on a server in response to a SYN from a client
did not get the injected skb mark that was tagged on the SYN packet.

Fixes: 84f39b08 ("net: support marking accepting TCP sockets")
Reviewed-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lockdep found an inconsistent lock state when mtk_get_stats64 is called
in user context while NAPI updates MAC statistics in softirq.

Use spin_trylock_bh/spin_unlock_bh fix following lockdep warning.

[   81.321030] WARNING: inconsistent lock state
[   81.325266] 4.12.0-rc1-00035-gd9dda65 #32 Not tainted
[   81.330273] --------------------------------
[   81.334505] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   81.340464] ksoftirqd/0/7 [HC0[0]:SC1[1]:HE1:SE0] takes:
[   81.345731]  (&syncp->seq#2){+.?...}, at: [<c054ba3c>] mtk_handle_status_irq.part.6+0x70/0x84
[   81.354219] {SOFTIRQ-ON-W} state was registered at:
[   81.359062]   lock_acquire+0xfc/0x2b0
[   81.362696]   mtk_stats_update_mac+0x60/0x2c0
[   81.367017]   mtk_get_stats64+0x17c/0x18c
[   81.370995]   dev_get_stats+0x48/0xbc
[   81.374628]   rtnl_fill_stats+0x48/0x128
[   81.378520]   rtnl_fill_ifinfo+0x4ac/0xd1c
[   81.382584]   rtmsg_ifinfo_build_skb+0x7c/0xe0
[   81.386991]   rtmsg_ifinfo.part.5+0x24/0x54
[   81.391139]   rtmsg_ifinfo+0x24/0x28
[   81.394685]   __dev_notify_flags+0xa4/0xac
[   81.398749]   dev_change_flags+0x50/0x58
[   81.402640]   devinet_ioctl+0x768/0x85c
[   81.406444]   inet_ioctl+0x1a4/0x1d0
[   81.409990]   sock_ioctl+0x16c/0x33c
[   81.413538]   do_vfs_ioctl+0xb4/0xa34
[   81.417169]   SyS_ioctl+0x44/0x6c
[   81.420458]   ret_fast_syscall+0x0/0x1c
[   81.424260] irq event stamp: 3354692
[   81.427806] hardirqs last  enabled at (3354692): [<c0678168>] net_rx_action+0xc0/0x504
[   81.435660] hardirqs last disabled at (3354691): [<c0678134>] net_rx_action+0x8c/0x504
[   81.443515] softirqs last  enabled at (3354106): [<c0101944>] __do_softirq+0x4b4/0x614
[   81.451370] softirqs last disabled at (3354109): [<c012f0c4>] run_ksoftirqd+0x44/0x80
[   81.459134]
[   81.459134] other info that might help us debug this:
[   81.465608]  Possible unsafe locking scenario:
[   81.465608]
[   81.471478]        CPU0
[   81.473900]        ----
[   81.476321]   lock(&syncp->seq#2);
[   81.479701]   <Interrupt>
[   81.482294]     lock(&syncp->seq#2);
[   81.485847]
[   81.485847]  *** DEADLOCK ***
[   81.485847]
[   81.491720] 1 lock held by ksoftirqd/0/7:
[   81.495693]  #0:  (&(&mac->hw_stats->stats_lock)->rlock){+.+...}, at: [<c054ba14>] mtk_handle_status_irq.part.6+0x48/0x84
[   81.506579]
[   81.506579] stack backtrace:
[   81.510904] CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 4.12.0-rc1-00035-gd9dda65 #32
[   81.518668] Hardware name: Mediatek Cortex-A7 (Device Tree)
[   81.524208] [<c0113dc4>] (unwind_backtrace) from [<c010e3f0>] (show_stack+0x20/0x24)
[   81.531899] [<c010e3f0>] (show_stack) from [<c03f9c64>] (dump_stack+0xb4/0xe0)
[   81.539072] [<c03f9c64>] (dump_stack) from [<c017e970>] (print_usage_bug+0x234/0x2e0)
[   81.546846] [<c017e970>] (print_usage_bug) from [<c017f058>] (mark_lock+0x63c/0x7bc)
[   81.554532] [<c017f058>] (mark_lock) from [<c017fe90>] (__lock_acquire+0x654/0x1bfc)
[   81.562217] [<c017fe90>] (__lock_acquire) from [<c0181d04>] (lock_acquire+0xfc/0x2b0)
[   81.569990] [<c0181d04>] (lock_acquire) from [<c054b76c>] (mtk_stats_update_mac+0x60/0x2c0)
[   81.578283] [<c054b76c>] (mtk_stats_update_mac) from [<c054ba3c>] (mtk_handle_status_irq.part.6+0x70/0x84)
[   81.587865] [<c054ba3c>] (mtk_handle_status_irq.part.6) from [<c054c2b8>] (mtk_napi_tx+0x358/0x37c)
[   81.596845] [<c054c2b8>] (mtk_napi_tx) from [<c06782ec>] (net_rx_action+0x244/0x504)
[   81.604533] [<c06782ec>] (net_rx_action) from [<c01015c4>] (__do_softirq+0x134/0x614)
[   81.612306] [<c01015c4>] (__do_softirq) from [<c012f0c4>] (run_ksoftirqd+0x44/0x80)
[   81.619907] [<c012f0c4>] (run_ksoftirqd) from [<c0154680>] (smpboot_thread_fn+0x14c/0x25c)
[   81.628110] [<c0154680>] (smpboot_thread_fn) from [<c014f8cc>] (kthread+0x150/0x180)
[   81.635798] [<c014f8cc>] (kthread) from [<c0109290>] (ret_from_fork+0x14/0x24)
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Elena Reshetova says:

====================
v2 ipv4/ipv6 refcount conversions

Changes in v2:
 * rebase on top of net-next
 * currently by default refcount_t = atomic_t (*) and uses all
   atomic standard operations unless CONFIG_REFCOUNT_FULL is enabled.
   This is a compromise for the systems that are critical on
   performance (such as net) and cannot accept even slight delay
   on the refcounter operations.

This series, for ipv4/ipv6 network components, replaces atomic_t reference
counters with the new refcount_t type and API (see include/linux/refcount.h).
By doing this we prevent intentional or accidental
underflows or overflows that can led to use-after-free vulnerabilities.

The patches are fully independent and can be cherry-picked separately.
In order to try with refcount functionality enabled in run-time,
CONFIG_REFCOUNT_FULL must be enabled.

NOTE: automatic kernel builder for some reason doesn't like all my
network branches and regularly times out the builds on these branches.
Suggestion for "waiting a day for a good coverage" doesn't work, as
we have seen with generic network conversions. So please wait for the
full report from kernel test rebot before merging further up.
This has been compile-tested in 116 configs, but 71 timed out (including
all s390-related configs again). I am trying to see if they can fix
build coverage for me in meanwhile.

* The respective change is currently merged into -next as
  "locking/refcount: Create unchecked atomic_t implementation".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix compilation warning
qed_iwarp.c:1721:5: warning: ll2_syn_handle may be used
uninitialized in this function
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I was trying to wrap my head around meaning of mru, and realised
that the second line of the comment defining it had somehow
ended up after the line defining cutlen, leading to much confusion.

Reorder the lines to make sense.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2017-07-03' of https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.13

Last minute changes to get new hardware and firmware support for
iwlwifi and few other changes I was able to squeeze in. Also two
patches for ieee80211.h and nl80211 as Johannes is away.

Major changes:

iwlwifi

* some important fixes for 9000 HW

* support for version 30 of the FW API for 8000 and 9000 series

* a few new PCI IDs for 9000 series

* reorganization of common files

brcmfmac

* support 4-way handshake offloading for WPA/WPA2-PSK and 802.1X
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some overlapping changes in the mlx5 driver.

A merge conflict resolution posted by Stephen Rothwell was used as a
guide.
Signed-off-by: David S. Miller <davem@davemloft.net>

sk_ehashfn() is only used from a single file.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to use refcount_set() on a newly created rule to avoid
following error :

[   64.601749] ------------[ cut here ]------------
[   64.601757] WARNING: CPU: 0 PID: 6476 at lib/refcount.c:184 refcount_sub_and_test+0x75/0xa0
[   64.601758] Modules linked in: w1_therm wire cdc_acm ehci_pci ehci_hcd mlx4_en ib_uverbs mlx4_ib ib_core mlx4_core
[   64.601769] CPU: 0 PID: 6476 Comm: ip Tainted: G        W       4.12.0-smp-DEV #274
[   64.601771] task: ffff8837bf482040 task.stack: ffff8837bdc08000
[   64.601773] RIP: 0010:refcount_sub_and_test+0x75/0xa0
[   64.601774] RSP: 0018:ffff8837bdc0f5c0 EFLAGS: 00010286
[   64.601776] RAX: 0000000000000026 RBX: 0000000000000001 RCX: 0000000000000000
[   64.601777] RDX: 0000000000000026 RSI: 0000000000000096 RDI: ffffed06f7b81eae
[   64.601778] RBP: ffff8837bdc0f5d0 R08: 0000000000000004 R09: fffffbfff4a54c25
[   64.601779] R10: 00000000cbc500e5 R11: ffffffffa52a6128 R12: ffff881febcf6f24
[   64.601779] R13: ffff881fbf4eaf00 R14: ffff881febcf6f80 R15: ffff8837d7a4ed00
[   64.601781] FS:  00007ff5a2f6b700(0000) GS:ffff881fff800000(0000) knlGS:0000000000000000
[   64.601782] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   64.601783] CR2: 00007ffcdc70d000 CR3: 0000001f9c91e000 CR4: 00000000001406f0
[   64.601783] Call Trace:
[   64.601786]  refcount_dec_and_test+0x11/0x20
[   64.601790]  fib_nl_delrule+0xc39/0x1630
[   64.601793]  ? is_bpf_text_address+0xe/0x20
[   64.601795]  ? fib_nl_newrule+0x25e0/0x25e0
[   64.601798]  ? depot_save_stack+0x133/0x470
[   64.601801]  ? ns_capable+0x13/0x20
[   64.601803]  ? __netlink_ns_capable+0xcc/0x100
[   64.601806]  rtnetlink_rcv_msg+0x23a/0x6a0
[   64.601808]  ? rtnl_newlink+0x1630/0x1630
[   64.601811]  ? memset+0x31/0x40
[   64.601813]  netlink_rcv_skb+0x2d7/0x440
[   64.601815]  ? rtnl_newlink+0x1630/0x1630
[   64.601816]  ? netlink_ack+0xaf0/0xaf0
[   64.601818]  ? kasan_unpoison_shadow+0x35/0x50
[   64.601820]  ? __kmalloc_node_track_caller+0x4c/0x70
[   64.601821]  rtnetlink_rcv+0x28/0x30
[   64.601823]  netlink_unicast+0x422/0x610
[   64.601824]  ? netlink_attachskb+0x650/0x650
[   64.601826]  netlink_sendmsg+0x7b7/0xb60
[   64.601828]  ? netlink_unicast+0x610/0x610
[   64.601830]  ? netlink_unicast+0x610/0x610
[   64.601832]  sock_sendmsg+0xba/0xf0
[   64.601834]  ___sys_sendmsg+0x6a9/0x8c0
[   64.601835]  ? copy_msghdr_from_user+0x520/0x520
[   64.601837]  ? __alloc_pages_nodemask+0x160/0x520
[   64.601839]  ? memcg_write_event_control+0xd60/0xd60
[   64.601841]  ? __alloc_pages_slowpath+0x1d50/0x1d50
[   64.601843]  ? kasan_slab_free+0x71/0xc0
[   64.601845]  ? mem_cgroup_commit_charge+0xb2/0x11d0
[   64.601847]  ? lru_cache_add_active_or_unevictable+0x7d/0x1a0
[   64.601849]  ? __handle_mm_fault+0x1af8/0x2810
[   64.601851]  ? may_open_dev+0xc0/0xc0
[   64.601852]  ? __pmd_alloc+0x2c0/0x2c0
[   64.601853]  ? __fdget+0x13/0x20
[   64.601855]  __sys_sendmsg+0xc6/0x150
[   64.601856]  ? __sys_sendmsg+0xc6/0x150
[   64.601857]  ? SyS_shutdown+0x170/0x170
[   64.601859]  ? handle_mm_fault+0x28a/0x650
[   64.601861]  SyS_sendmsg+0x12/0x20
[   64.601863]  entry_SYSCALL_64_fastpath+0x13/0x94

Fixes: 717d1e99 ("net: convert fib_rule.refcnt from atomic_t to refcount_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable mlx4_log_num_mgm_entry_size is only called in main.c.

CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 9256645a ("net/core: relax BUILD_BUG_ON in
netdev_stats_to_stats64") made an attempt to read beyond
the size of the source a possibility.

Fix to only copy src size to dest. As dest might be bigger than src.

 ==================================================================
 BUG: KASAN: slab-out-of-bounds in netdev_stats_to_stats64+0xe/0x30 at addr ffff8801be248b20
 Read of size 192 by task VBoxNetAdpCtl/6734
 CPU: 1 PID: 6734 Comm: VBoxNetAdpCtl Tainted: G           O    4.11.4prahal+intel+ #118
 Hardware name: LENOVO 20CDCTO1WW/20CDCTO1WW, BIOS GQET52WW (1.32 ) 05/04/2017
 Call Trace:
  dump_stack+0x63/0x86
  kasan_object_err+0x1c/0x70
  kasan_report+0x270/0x520
  ? netdev_stats_to_stats64+0xe/0x30
  ? sched_clock_cpu+0x1b/0x190
  ? __module_address+0x3e/0x3b0
  ? unwind_next_frame+0x1ea/0xb00
  check_memory_region+0x13c/0x1a0
  memcpy+0x23/0x50
  netdev_stats_to_stats64+0xe/0x30
  dev_get_stats+0x1b9/0x230
  rtnl_fill_stats+0x44/0xc00
  ? nla_put+0xc6/0x130
  rtnl_fill_ifinfo+0xe9e/0x3700
  ? rtnl_fill_vfinfo+0xde0/0xde0
  ? sched_clock+0x9/0x10
  ? sched_clock+0x9/0x10
  ? sched_clock_local+0x120/0x130
  ? __module_address+0x3e/0x3b0
  ? unwind_next_frame+0x1ea/0xb00
  ? sched_clock+0x9/0x10
  ? sched_clock+0x9/0x10
  ? sched_clock_cpu+0x1b/0x190
  ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
  ? depot_save_stack+0x1d8/0x4a0
  ? depot_save_stack+0x34f/0x4a0
  ? depot_save_stack+0x34f/0x4a0
  ? save_stack+0xb1/0xd0
  ? save_stack_trace+0x16/0x20
  ? save_stack+0x46/0xd0
  ? kasan_slab_alloc+0x12/0x20
  ? __kmalloc_node_track_caller+0x10d/0x350
  ? __kmalloc_reserve.isra.36+0x2c/0xc0
  ? __alloc_skb+0xd0/0x560
  ? rtmsg_ifinfo_build_skb+0x61/0x120
  ? rtmsg_ifinfo.part.25+0x16/0xb0
  ? rtmsg_ifinfo+0x47/0x70
  ? register_netdev+0x15/0x30
  ? vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp]
  ? vboxNetAdpCreate+0x210/0x400 [vboxnetadp]
  ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
  ? do_vfs_ioctl+0x17f/0xff0
  ? SyS_ioctl+0x74/0x80
  ? do_syscall_64+0x182/0x390
  ? __alloc_skb+0xd0/0x560
  ? __alloc_skb+0xd0/0x560
  ? save_stack_trace+0x16/0x20
  ? init_object+0x64/0xa0
  ? ___slab_alloc+0x1ae/0x5c0
  ? ___slab_alloc+0x1ae/0x5c0
  ? __alloc_skb+0xd0/0x560
  ? sched_clock+0x9/0x10
  ? kasan_unpoison_shadow+0x35/0x50
  ? kasan_kmalloc+0xad/0xe0
  ? __kmalloc_node_track_caller+0x246/0x350
  ? __alloc_skb+0xd0/0x560
  ? kasan_unpoison_shadow+0x35/0x50
  ? memset+0x31/0x40
  ? __alloc_skb+0x31f/0x560
  ? napi_consume_skb+0x320/0x320
  ? br_get_link_af_size_filtered+0xb7/0x120 [bridge]
  ? if_nlmsg_size+0x440/0x630
  rtmsg_ifinfo_build_skb+0x83/0x120
  rtmsg_ifinfo.part.25+0x16/0xb0
  rtmsg_ifinfo+0x47/0x70
  register_netdevice+0xa2b/0xe50
  ? __kmalloc+0x171/0x2d0
  ? netdev_change_features+0x80/0x80
  register_netdev+0x15/0x30
  vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp]
  vboxNetAdpCreate+0x210/0x400 [vboxnetadp]
  ? vboxNetAdpComposeMACAddress+0x1d0/0x1d0 [vboxnetadp]
  ? kasan_check_write+0x14/0x20
  VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
  ? VBoxNetAdpLinuxOpen+0x20/0x20 [vboxnetadp]
  ? lock_acquire+0x11c/0x270
  ? __audit_syscall_entry+0x2fb/0x660
  do_vfs_ioctl+0x17f/0xff0
  ? __audit_syscall_entry+0x2fb/0x660
  ? ioctl_preallocate+0x1d0/0x1d0
  ? __audit_syscall_entry+0x2fb/0x660
  ? kmem_cache_free+0xb2/0x250
  ? syscall_trace_enter+0x537/0xd00
  ? exit_to_usermode_loop+0x100/0x100
  SyS_ioctl+0x74/0x80
  ? do_sys_open+0x350/0x350
  ? do_vfs_ioctl+0xff0/0xff0
  do_syscall_64+0x182/0x390
  entry_SYSCALL64_slow_path+0x25/0x25
 RIP: 0033:0x7f7e39a1ae07
 RSP: 002b:00007ffc6f04c6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
 RAX: ffffffffffffffda RBX: 00007ffc6f04c730 RCX: 00007f7e39a1ae07
 RDX: 00007ffc6f04c730 RSI: 00000000c0207601 RDI: 0000000000000007
 RBP: 00007ffc6f04c700 R08: 00007ffc6f04c780 R09: 0000000000000008
 R10: 0000000000000541 R11: 0000000000000206 R12: 0000000000000007
 R13: 00000000c0207601 R14: 00007ffc6f04c730 R15: 0000000000000012
 Object at ffff8801be248008, in cache kmalloc-4096 size: 4096
 Allocated:
 PID = 6734
  save_stack_trace+0x16/0x20
  save_stack+0x46/0xd0
  kasan_kmalloc+0xad/0xe0
  __kmalloc+0x171/0x2d0
  alloc_netdev_mqs+0x8a7/0xbe0
  vboxNetAdpOsCreate+0x65/0x1c0 [vboxnetadp]
  vboxNetAdpCreate+0x210/0x400 [vboxnetadp]
  VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
  do_vfs_ioctl+0x17f/0xff0
  SyS_ioctl+0x74/0x80
  do_syscall_64+0x182/0x390
  return_from_SYSCALL_64+0x0/0x6a
 Freed:
 PID = 5600
  save_stack_trace+0x16/0x20
  save_stack+0x46/0xd0
  kasan_slab_free+0x73/0xc0
  kfree+0xe4/0x220
  kvfree+0x25/0x30
  single_release+0x74/0xb0
  __fput+0x265/0x6b0
  ____fput+0x9/0x10
  task_work_run+0xd5/0x150
  exit_to_usermode_loop+0xe2/0x100
  do_syscall_64+0x26c/0x390
  return_from_SYSCALL_64+0x0/0x6a
 Memory state around the buggy address:
  ffff8801be248a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff8801be248b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 >ffff8801be248b80: 00 00 00 00 00 00 00 00 00 00 00 07 fc fc fc fc
                                                     ^
  ffff8801be248c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff8801be248c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ==================================================================
Signed-off-by: Alban Browaeys <alban.browaeys@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pointer hdr in netxen_setup_minidump() is set but never used, thus
should be removed.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Benc says:

====================
vxlan, geneve: fix hlist corruption

Fix memory corruption introduced with the support of both IPv4 and IPv6
sockets in a single device. The same bug is present in VXLAN and Geneve.
====================
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's not a good idea to add the same hlist_node to two different hash lists.
This leads to various hard to debug memory corruptions.

Fixes: 8ed66f0e ("geneve: implement support for IPv6-based tunnels")
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's not a good idea to add the same hlist_node to two different hash lists.
This leads to various hard to debug memory corruptions.

Fixes: b1be00a6 ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If mlx5 is set to be built-in and mlxfw as a module, we
get a link error:

drivers/built-in.o: In function `mlx5_firmware_flash':
(.text+0x5aed72): undefined reference to `mlxfw_firmware_flash'

Since we don't want to mandate selecting mlxfw for mlx5 users, we
use the IS_REACHABLE macro to make sure that a stub is exposed
to the caller.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Misc BPF helper/verifier improvements

Miscellanous improvements I still had in my queue, it adds a new
bpf_skb_adjust_room() helper for cls_bpf, exports to fdinfo whether
tail call array owner is JITed, so iproute2 error reporting can be
improved on that regard, a small cleanup and extension to trace
printk, two verifier patches, one to make the code around narrower
ctx access a bit more straight forward and one to allow for imm += x
operations, that we've seen LLVM generating and the verifier currently
rejecting. We've included the patch 6 given it's rather small and
we ran into it from LLVM side, it would be great if it could be
queued for stable as well after the merge window. Last but not least,
test cases are added also related to imm alu improvement.

Thanks a lot!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add couple of verifier test cases for x|imm += pkt_ptr, including the
imm += x extension.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the verifier does not track imm across alu operations when
the source register is of unknown type. This adds additional pattern
matching to catch this and track imm. We've seen LLVM generating this
pattern while working on cilium.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, bpf_trace_printk does not support common formatting
symbol '%i' however vsprintf does and is what eventually gets
called by bpf helper. If users are used to '%i' and currently
make use of it, then bpf_trace_printk will just return with
error without dumping anything to the trace pipe, so just add
support for '%i' to the helper.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We do export through fdinfo already whether a prog is JITed or not,
given a program load can fail in case of either prog or tail call map
has JITed property, but neither both are JITed or not JITed, we can
facilitate error reporting in loaders like iproute2 through exporting
owner_jited of tail call map. We already do export owner_prog_type
through this facility, so parser can pick up both for comparison.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This work tries to make the semantics and code around the
narrower ctx access a bit easier to follow. Right now
everything is done inside the .is_valid_access(). Offset
matching is done differently for read/write types, meaning
writes don't support narrower access and thus matching only
on offsetof(struct foo, bar) is enough whereas for read
case that supports narrower access we must check for
offsetof(struct foo, bar) + offsetof(struct foo, bar) +
sizeof(<bar>) - 1 for each of the cases. For read cases of
individual members that don't support narrower access (like
packet pointers or skb->cb[] case which has its own narrow
access logic), we check as usual only offsetof(struct foo,
bar) like in write case. Then, for the case where narrower
access is allowed, we also need to set the aux info for the
access. Meaning, ctx_field_size and converted_op_size have
to be set. First is the original field size e.g. sizeof(<bar>)
as in above example from the user facing ctx, and latter
one is the target size after actual rewrite happened, thus
for the kernel facing ctx. Also here we need the range match
and we need to keep track changing convert_ctx_access() and
converted_op_size from is_valid_access() as both are not at
the same location.

We can simplify the code a bit: check_ctx_access() becomes
simpler in that we only store ctx_field_size as a meta data
and later in convert_ctx_accesses() we fetch the target_size
right from the location where we do convert. Should the verifier
be misconfigured we do reject for BPF_WRITE cases or target_size
that are not provided. For the subsystems, we always work on
ranges in is_valid_access() and add small helpers for ranges
and narrow access, convert_ctx_accesses() sets target_size
for the relevant instruction.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This work adds a helper that can be used to adjust net room of an
skb. The helper is generic and can be further extended in future.
Main use case is for having a programmatic way to add/remove room to
v4/v6 header options along with cls_bpf on egress and ingress hook
of the data path. It reuses most of the infrastructure that we added
for the bpf_skb_change_type() helper which can be used in nat64
translations. Similarly, the helper only takes care of adjusting the
room so that related data is populated and csum adapted out of the
BPF program using it.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a small skb_mac_header_len() helper similarly as the
skb_network_header_len() we have and replace open coded
places in BPF's bpf_skb_change_proto() helper. Will also
be used in upcoming work.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The HP lt4132 LTE/HSPA+ 4G Module (03f0:a31d) is a rebranded Huawei
ME906s-158 device. It, like the ME906s-158, requires the "NDP to end"
quirk for correct operation.
Signed-off-by: Tore Anderson <tore@fud.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the IPVLAN documentation there is an example command line where the
master and slave interface names are inverted.
Fix the command line and also add the optional `name' keyword to better
describe what the command is doing.

v2: added commit message
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit a985343b ("vxlan: refactor verification and application of
configuration") modified vxlan device creation, and replaced the
assignment of vxlan->net to src_net with dev_net(netdev) in ->setup().

But dev_net(netdev) is not the same as src_net. At the time ->setup()
is called, dev_net hasn't been set yet, so we end up creating the
socket for the vxlan device in init_net.

Fix this by bringing back the assignment of vxlan->net during device
creation.

Fixes: a985343b ("vxlan: refactor verification and application of configuration")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lin Yun Sheng says:

====================
Add loopback support in phy_driver and hns ethtool fix

This Patch Set add set_loopback in phy_driver and use it to setup loopback
when doing ethtool phy self_test.

Patch V8:
	Respin the Patch based on net-next

Patch V7:
	1. Add comment why resume the phy in hns_nic_config_phy_loopback.
	2. Fix a typo error in patch description.

Patch V6:
	Fix Or'ing error code in __lb_setup.

Patch V5:
	Removing non loopback related code change.

Patch V4:
	1. Remove c45 checking
	2. Add -ENOTSUPP when function pointer is null,
	   take mutex in phy_loopback.

Patch V3:
	Calling phy_loopback enable and disable in pair in hns mac driver.

Patch V2:
	1. Add phy_loopback in phy_device.c.
	2. Do error checking and do the read and write once in
	   genphy_loopback.
	3. Remove gen10g_loopback in phy_device.c.

Patch V1:
	Initial Submit
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use function set_loopback in phy_driver to setup phy loopback
when doing ethtool self test.
Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>