- 24 Mar, 2018 40 commits
-
-
Scott Wood authored
[ Upstream commit 9b70de6d ] The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics. Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses. This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops: Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761daf #2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761daf) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160 Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Kleiner authored
[ Upstream commit 60b95d70 ] So far we only allowed for 1 retry and just failed the query - and thereby high precision vblank timestamping - if we did not get a reasonable result, as such a failure wasn't considered all too horrible. There are a few NVidia gpu models out there which may need a bit more than 1 retry to get a successful query result under some conditions. Since Linux 4.4 the update code for vblank counter and timestamp in drm_update_vblank_count() changed so that the implementation assumes that high precision vblank timestamping of a kms driver either consistently succeeds or consistently fails for a given video mode and encoder/connector combo. Iow. switching from success to fail or vice versa on a modeset or connector change is ok, but spurious temporary failure for a given setup can confuse the core code and potentially cause bad miscounting of vblanks and confusion or hangs in userspace clients which rely on vblank stuff, e.g., desktop compositors. Therefore change the max retry count to a larger number - more than any gpu so far is known to need to succeed, but still low enough so that these queries which do also happen in vblank interrupt are still fast enough to be not disastrously long if something would go badly wrong with them. As such sporadic retries only happen seldom even on affected gpu's, this could mean a vblank irq could take a few dozen microseconds longer every few hours of uptime -- better than a desktop compositor randomly hanging every couple of hours or days of uptime in a hard to reproduce manner. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 2bde7c32 ] The power table addresses should be contiguous, but there was a hole where 0x34 was missing. On most devices this is not a problem as addresses above 0x34 are used for the BUC# convertors which are not used in the DSDTs I've access to but after the BUC# convertors there is a field named GPI1 in the DSTDs, which does get used in some cases and ended up turning BUC6 on and off due to the wrong addresses, resulting in turning the entire device off (or causing it to reboot). Removing the hole in the addresses fixes this, fixing one of my Bay Trail tablets turning off while booting the mainline kernel. While at it add comments with the field names used in the DSDTs to make it easier to compare the register and bits used at each address with the datasheet. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Robert Lippert authored
[ Upstream commit 2c1175c2 ] Commit c49c0976 ("ipmi: Don't call receive handler in the panic context") means that the panic_recv_free is not called during a panic and the atomic count does not drop to 0. Fix this by only expecting one decrement of the atomic variable which comes from panic_smi_free. Signed-off-by:
Robert Lippert <rlippert@google.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit 2c949ce3 ] The PCIe programming sequence in TRM suggests CLKSTCTRL of PCIe should be set to SW_WKUP. There are no issues when CLKSTCTRL is set to HW_AUTO in RC mode. However in EP mode, the host system is not able to access the MEMSPACE and setting the CLKSTCTRL to SW_WKUP fixes it. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
yangbo lu authored
[ Upstream commit a627f025 ] The ls1046a datasheet specified that the max SD clock frequency for eSDHC SDR104/HS200 was 167MHz, and the ls1012a datasheet specified it's 125MHz for ls1012a. So this patch is to add the limitation. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 9e966527 ] Function dev_alloc_skb() will return a NULL pointer if there is no enough memory. However, in function WILC_WFI_mon_xmit(), its return value is used without validation. This may result in a bad memory access bug. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Sameer Wadgaonkar authored
[ Upstream commit 3c2bf0bd ] The root issue is that we are not allowed to have items on the stack being passed to "DMA" like operations. In this case we have a vmcall and an inline completion of scsi command. This patch fixes the issue by moving the variables on stack in do_scsi_nolinuxstat() to heap memory. Signed-off-by:
Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com> Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
-
Ming Lei authored
[ Upstream commit a4e84aae ] mtip32xx supposes that 'request_idx' passed to .init_request() is tag of the request, and use that as request's tag to initialize command header. After MQ IO scheduler is in, request tag assigned isn't same with the request index anymore, so cause strange hardware failure on mtip32xx, even whole system panic is triggered. This patch fixes the issue by initializing command header via request's real tag. Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Keerthy authored
[ Upstream commit 85fdaf8e ] POWERHOLD signal has higher priority over the DEV_ON bit. So power off will not happen if the POWERHOLD is held high. Hence reset the MUX to GPIO_7 mode to release the POWERHOLD and the DEV_ON bit to take effect to power off the PMIC. PMIC Power off happens in dire situations like thermal shutdown so irrespective of the POWERHOLD setting go ahead and turn off the powerhold. Currently poweroff is broken on boards that have powerhold enabled. This fixes poweroff on those boards. Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit cf147085 ] ieee80211_frame_acked is called when a frame is acked by the peer. In case this is a management frame, we check if this an SMPS frame, in which case we can update our antenna configuration. When we parse the management frame we look at the category in case it is an action frame. That byte sits after the IV in case the frame was encrypted. This means that if the frame was encrypted, we basically look at the IV instead of looking at the category. It is then theorically possible that we think that an SMPS action frame was acked where really we had another frame that was encrypted. Since the only management frame whose ack needs to be tracked is the SMPS action frame, and that frame is not a robust management frame, it will never be encrypted. The easiest way to fix this problem is then to not look at frames that were encrypted. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit e1cbfd7b ] Normally we don't have inline extents followed by regular extents, but there's currently at least one harmless case where this happens. For example, when the page size is 4Kb and compression is enabled: $ mkfs.btrfs -f /dev/sdb $ mount -o compress /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar $ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar In this case we get a compressed inline extent, representing 4Kb of data, followed by a hole extent and then a regular data extent. The inline extent was not expanded/converted to a regular extent exactly because it represents 4Kb of data. This does not cause any apparent problem (such as the issue solved by commit e1699d2d ("btrfs: add missing memset while reading compressed inline extents")) except trigger an unexpected case in the incremental send code path that makes us issue an operation to write a hole when it's not needed, resulting in more writes at the receiver and wasting space at the receiver. So teach the incremental send code to deal with this particular case. The issue can be currently triggered by running fstests btrfs/137 with compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137). Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 9dc7efd3 ] Function create_singlethread_workqueue() will return a NULL pointer if there is no enough memory, and its return value should be validated before using. However, in function rndis_wlan_bind(), its return value is not checked. This may cause NULL dereference bugs. This patch fixes it. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 5fb01e91 ] Function alloc_skb() will return a NULL pointer if there is no enough memory. However, in function mt7601u_mcu_msg_alloc(), its return value is not validated before it is used. This patch fixes it. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
Shrirang Bagul authored
[ Upstream commit 7383d44b ] This patch fixes the sensor platform data initialisation for st_pressure and st_accel device drivers. Without this patch, the driver fails to register the sensors when the user removes and re-loads the driver. 1. Unload the kernel modules for st_pressure $ sudo rmmod st_pressure_i2c $ sudo rmmod st_pressure 2. Re-load the driver $ sudo insmod st_pressure $ sudo insmod st_pressure_i2c Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 99bbf6ec ] consider the sequence of commands: mkdir -p /import/nfs /import/bind /import/etc mount --bind / /import/bind mount --make-private /import/bind mount --bind /import/etc /import/bind/etc exportfs -o rw,no_root_squash,crossmnt,async,no_subtree_check localhost:/ mount -o vers=4 localhost:/ /import/nfs ls -l /import/nfs/etc You would not expect this to report a stale file handle. Yet it does. The manipulations under /import/bind cause the dentry for /etc to get the DCACHE_MOUNTED flag set, even though nothing is mounted on /etc. This causes nfsd to call nfsd_cross_mnt() even though there is no mountpoint. So an upcall to mountd for "/etc" is performed. The 'crossmnt' flag on the export of / causes mountd to report that /etc is exported as it is a descendant of /. It assumes the kernel wouldn't ask about something that wasn't a mountpoint. The filehandle returned identifies the filesystem and the inode number of /etc. When this filehandle is presented to rpc.mountd, via "nfsd.fh", the inode cannot be found associated with any name in /etc/exports, or with any mountpoint listed by getmntent(). So rpc.mountd says the filehandle doesn't exist. Hence ESTALE. This is fixed by teaching nfsd not to trust DCACHE_MOUNTED too much. It is just a hint, not a guarantee. Change nfsd_mountpoint() to return '1' for a certain mountpoint, '2' for a possible mountpoint, and 0 otherwise. Then change nfsd_crossmnt() to check if follow_down() actually found a mountpount and, if not, to avoid performing a lookup if the location is not known to certainly require an export-point. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Vlad Tsyrklevich authored
[ Upstream commit 4f7f4dcf ] The 'num_sge' variable is verfied to be smaller than the 'sge_count' variable; however, since both are user-controlled it's possible to cause an integer overflow for the kmalloc multiply on 32-bit platforms (num_sge and sge_count are both defined u32). By crafting an input that causes a smaller-than-expected allocation it's possible to write controlled data out-of-bounds. Signed-off-by:
Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 4da2b1eb ] Commit da244654 ("[SCSI] mac_esp: fix for quadras with two esp chips") added mac_scsi_esp_intr() to handle the IRQ lines from a pair of on-board ESP chips (a normal shared IRQ did not work). Proper mutual exclusion was missing from that patch. This patch fixes race conditions between comparison and assignment of esp_chips[] pointers. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 91ec701a ] Function pci_find_ext_capability() may return 0, which is an invalid address. In function qlcnic_sriov_virtid_fn(), its return value is used without validation. This may result in invalid memory access bugs. This patch fixes the bug. Signed-off-by:
-
Pan Bian authored
[ Upstream commit 2a39e7aa ] In function pc300_pci_init_one(), on the ioremap error path, function pc300_pci_remove_one() is called to free the allocated memory. However, the path is not terminated, and the freed memory will be used later, resulting in use-after-free bugs. This path fixes the bug. Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit ec5ab893 ] devm_pinctrl_get() returns error pointers, it never returns NULL. Fixes: 455e5cd6 ("mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Jarno Rajahalme authored
[ Upstream commit cf5d7091 ] Conntrack helpers do not check for a potentially clashing conntrack entry when creating a new expectation. Also, nf_conntrack_in() will check expectations (via init_conntrack()) only if a conntrack entry can not be found. The expectation for a packet which also matches an existing conntrack entry will not be removed by conntrack, and is currently handled inconsistently by OVS, as OVS expects the expectation to be removed when the connection tracking entry matching that expectation is confirmed. It should be noted that normally an IP stack would not allow reuse of a 5-tuple of an old (possibly lingering) connection for a new data connection, so this is somewhat unlikely corner case. However, it is possible that a misbehaving source could cause conntrack entries be created that could then interfere with new related connections. Fix this in the OVS module by deleting the clashing conntrack entry after an expectation has been matched. This causes the following nf_conntrack_in() call also find the expectation and remove it when creating the new conntrack entry, as well as the forthcoming reply direction packets to match the new related connection instead of the old clashing conntrack entry. Fixes: 7f8a436e ("openvswitch: Add conntrack action") Reported-by:
Yang Song <yangsong@vmware.com> Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Gao Feng authored
[ Upstream commit 470acf55 ] There are two cases which causes refcnt leak. 1. When nf_ct_timeout_ext_add failed in xt_ct_set_timeout, it should free the timeout refcnt. Now goto the err_put_timeout error handler instead of going ahead. 2. When the time policy is not found, we should call module_put. Otherwise, the related cthelper module cannot be removed anymore. It is easy to reproduce by typing the following command: # iptables -t raw -A OUTPUT -p tcp -j CT --helper ftp --timeout xxx Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 3f247de7 ] There are two versions of a structure for queue creation and setup that the driver shares with FW. The driver was only treating as version 0. Verify WQ_CREATE with 128B WQEs in V0 and V1. Code review of another bug showed the driver passing 128B WQEs and 8 pages in WQ CREATE and V0. Code inspection/instrumentation showed that the driver uses V0 in WQ_CREATE and if the caller passes queue->entry_size 128B, the driver sets the hdr_version to V1 so all is good. When I tested the V1 WQ_CREATE, the mailbox failed causing the driver to unload. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e6a33532 ] My static checker complains that if snd_hdac_bus_get_response() returns -EIO then "res" is uninitialized. Fix this by initializing it to -1 so that the error is handled correctly. Fixes: d8c2dab8 ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Maor Gottlieb authored
[ Upstream commit ca37a664 ] Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise it would lead to SIGBUS. Remove the shared flags from the vma after we change it to be anonymous. This is easily reproduced by doing modprobe -r while running a user-space application such as raw_ethernet_bw. Fixes: ae184dde ('IB/mlx4_ib: Disassociate support') Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Maor Gottlieb authored
[ Upstream commit 22c3653d ] When the driver disassociate user context, it changes the vma to anonymous by setting the vm_ops to null and zap the vma ptes. In order to avoid race in the kernel, we need to take write lock before we change the vma entries. Fixes: ae184dde ('IB/mlx4_ib: Disassociate support') Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 30260501 ] If skb_pad() fails then it frees skb and we don't need to free it again at the end of the function. Fixes: dc7bf5d7 ("HSI: Introduce driver for SSI Protocol") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Feras Daoud authored
[ Upstream commit 9a9b8112 ] Update the broadcast address in the priv->broadcast object when the Pkey value changes in index 0, otherwise the multicast GID value will keep the previous value of the PKey, and will not be updated. This leads to interface state down because the interface will keep the old PKey value. For example, in SR-IOV environment, if the PF changes the value of PKey index 0 for one of the VFs, then the VF receives PKey change event that triggers heavy flush. This flush calls update_parent_pkey that update the broadcast object and its relevant members. If in this case the multicast GID will not be updated, the interface state will be down. Fixes: c2904141 ("IPoIB: Fix pkey change flow for virtualization environments") Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Feras Daoud authored
[ Upstream commit 3e31a490 ] Before calling ipoib_stop, rtnl_lock should be taken, then the flow clears the IPOIB_FLAG_ADMIN_UP and IPOIB_FLAG_OPER_UP flags, and waits for mcast completion if IPOIB_MCAST_FLAG_BUSY is set. On the other hand, the flow of multicast join task initializes a mcast completion, sets the IPOIB_MCAST_FLAG_BUSY and calls ipoib_mcast_join. If IPOIB_FLAG_OPER_UP flag is not set, this call returns EINVAL without setting the mcast completion and leads to a deadlock. ipoib_stop | | | clear_bit(IPOIB_FLAG_ADMIN_UP) | | | Context Switch | | ipoib_mcast_join_task | | | spin_lock_irq(lock) | | | init_completion(mcast) | | | set_bit(IPOIB_MCAST_FLAG_BUSY) | | | Context Switch | | clear_bit(IPOIB_FLAG_OPER_UP) | | | spin_lock_irqsave(lock) | | | Context Switch | | ipoib_mcast_join | return (-EINVAL) | | | spin_unlock_irq(lock) | | | Context Switch | | ipoib_mcast_dev_flush | wait_for_completion(mcast) | ipoib_stop will wait for mcast completion for ever, and will not release the rtnl_lock. As a result panic occurs with the following trace: [13441.639268] Call Trace: [13441.640150] [<ffffffff8168b579>] schedule+0x29/0x70 [13441.641038] [<ffffffff81688fc9>] schedule_timeout+0x239/0x2d0 [13441.641914] [<ffffffff810bc017>] ? complete+0x47/0x50 [13441.642765] [<ffffffff810a690d>] ? flush_workqueue_prep_pwqs+0x16d/0x200 [13441.643580] [<ffffffff8168b956>] wait_for_completion+0x116/0x170 [13441.644434] [<ffffffff810c4ec0>] ? wake_up_state+0x20/0x20 [13441.645293] [<ffffffffa05af170>] ipoib_mcast_dev_flush+0x150/0x190 [ib_ipoib] [13441.646159] [<ffffffffa05ac967>] ipoib_ib_dev_down+0x37/0x60 [ib_ipoib] [13441.647013] [<ffffffffa05a4805>] ipoib_stop+0x75/0x150 [ib_ipoib] Fixes: 08bc3276 ("IB/ipoib: fix for rare multicast join race condition") Signed-off-by:
-
Mikhail Paulyshka authored
[ Upstream commit fc7438b1 ] Headset microphone does not work out of the box on ASUS Nx51 laptops. This patch fixes it. Patch tested on Asus N551 laptop. Asus N751 part is not tested, but according to [1] this laptop uses the same audiosystem. 1. https://bugzilla.kernel.org/show_bug.cgi?id=117781 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195437Signed-off-by:
Mikhail Paulyshka <me@mixaill.tk> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Bernd Faust authored
[ Upstream commit 5313eecc ] After an upgrade to Linux kernel v4.x the hardware timestamps of the 82579 Gigabit Ethernet Controller are different than expected. The values that are being read are almost four times as big as before the kernel upgrade. The difference is that after the upgrade the driver sets the clock frequency to 25MHz, where before the upgrade it was set to 96MHz. Intel confirmed that the correct frequency for this network adapter is 96MHz. Signed-off-by:
Bernd Faust <berndfaust@gmail.com> Acked-by:
Sasha Neftin <sasha.neftin@intel.com> Acked-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 0f9fa831 ] When using TCP FastOpen for an active session, we send one wakeup event from tcp_finish_connect(), right before the data eventually contained in the received SYNACK is queued to sk->sk_receive_queue. This means that depending on machine load or luck, poll() users might receive POLLOUT events instead of POLLIN|POLLOUT To fix this, we need to move the call to sk->sk_state_change() after the (optional) call to tcp_rcv_fastopen_synack() Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Benjamin Coddington authored
[ Upstream commit 43b7d964 ] Commit a7d42ddb ("nfs: add mirroring support to pgio layer") moved pg_cleanup out of the path when there was non-sequental I/O that needed to be flushed. The result is that for layouts that have more than one layout segment per file, the pg_lseg is not cleared, so we can end up hitting the WARN_ON_ONCE(req_start >= seg_end) in pnfs_generic_pg_test since the pg_lseg will be pointing to that previously-flushed layout segment. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: a7d42ddb ("nfs: add mirroring support to pgio layer") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Guoqing Jiang authored
[ Upstream commit cf25ae78 ] Since nr_queued is changed, we need to call wake_up here if the array is already frozen and waiting for condition "nr_pending == nr_queued + extra" to be true. And commit 824e47da ("RAID1: avoid unnecessary spin locks in I/O barrier code") which has already added the wake_up for raid1. Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Reviewed-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Suman Anna authored
[ Upstream commit abaa7e5b ] Move the registration of the OMAP IOMMU platform driver before setting the IOMMU callbacks on the platform bus. This causes the IOMMU devices to be probed first before the .add_device() callback is invoked for all registered devices, and allows the iommu_group support to be added to the OMAP IOMMU driver. While at this, also check for the return status from bus_set_iommu. Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Abel Vesa authored
[ Upstream commit 6f05d076 ] The support for dynamic ftrace with CONFIG_DEBUG_RODATA involves overriding the weak arch_ftrace_update_code() with a variant which makes the kernel text writable around the patching. This override was however added under the CONFIG_OLD_MCOUNT ifdef, and CONFIG_OLD_MCOUNT is only enabled if frame pointers are enabled. This leads to non-functional dynamic ftrace (ftrace triggers a WARN_ON()) when CONFIG_DEBUG_RODATA is enabled and CONFIG_FRAME_POINTER is not. Move the override out of that ifdef and into the CONFIG_DYNAMIC_FTRACE ifdef where it belongs. Fixes: 80d6b0c2 ("ARM: mm: allow text and rodata sections to be read-only") Suggested-by:
Nicolai Stange <nicstange@gmail.com> Suggested-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
Abel Vesa <abelvesa@gmail.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit bd9166ff ] At the moment kvmppc_mmu_map_page() returns -1 if mmu_hash_ops.hpte_insert() fails for any reason so the page fault handler resumes the guest and it faults on the same address again. This adds distinction to kvmppc_mmu_map_page() to return -EIO if mmu_hash_ops.hpte_insert() failed for a reason other than full pteg. At the moment only pSeries_lpar_hpte_insert() returns -2 if plpar_pte_enter() failed with a code other than H_PTEG_FULL. Other mmu_hash_ops.hpte_insert() instances can only fail with -1 "full pteg". With this change, if PR KVM fails to update HPT, it can signal the userspace about this instead of returning to guest and having the very same page fault over and over again. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
David Gibson authored
[ Upstream commit 25d1d50e ] Passed through SCSI targets may have transfer limits which come from the host SCSI controller or something on the host side other than the target itself. To make this work properly, the hypervisor can adjust the target's VPD information to advertise these limits. But for that to work, the guest has to look at the VPD pages, which we won't do by default if it is an SPC-2 device, even if it does actually support it. This adds a workaround to address this, forcing devices attached to a virtio-scsi controller to always check the VPD pages. This is modelled on a similar workaround for the storvsc (Hyper-V) SCSI controller, although that exists for slightly different reasons. A specific case which causes this is a volume from IBM's IPR RAID controller (which presents as an SPC-2 device, although it does support VPD) passed through with qemu's 'scsi-block' device. [mkp: fixed typo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Bharat Kumar Reddy Gooty authored
[ Upstream commit 8973aa4a ] Corrected the bits for power and iso. Signed-off-by:
Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Fixes: f7225a83 ("clk: ns2: add clock support for Broadcom Northstar 2 SoC") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
