- 26 May, 2016 17 commits
-
-
Dennis Dalessandro authored
The deletion of a cdev is not a fence for holding off references to the structure. The driver attempts to delete the cdev and then proceeds to free the parent structure, the hfi1_devdata, or dd. This can potentially lead to a kernel panic in situations where a user has an FD for the cdev open, and the pci device gets removed. If the user then closes the FD there will be a NULL dereference when trying to do put on the cdev's kobject. Fix this by pointing the cdev's kobject.parent at a new kobject embedded in its parent structure. Also take a reference when the device is opened and put it back when it is closed. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Dennis Dalessandro authored
Add a trace message to HFI1s user IOCTL handling. This allows debugging of which IOCTLs are being handled by the driver. Reviewed-by:
-
Dennis Dalessandro authored
Remove the write() handler for user space commands now that ioctl handling is available. User apps will need to change to use ioctl from this point forward. Reviewed-by:
-
Dennis Dalessandro authored
IOCTL is more suited to what user space commands need to do than the write() interface. Add IOCTL definitions for all existing write commands and the handling for those. The write() interface will be removed in a follow on patch. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
-
Dennis Dalessandro authored
The HFI1_CMD_SDMA_STATUS_UPD command was never implemented it has no reason to live in the driver. Remove it. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Dennis Dalessandro authored
The snoop/diag interface is better served by an implementation which is more general and usable by other drivers perhaps. Go ahead and remove the code now and get rid of the char dev. We can put the feature back when we have a more agreeable solution. Reviewed-by:
Dean Luick <dean.luick@intel.com> Reviewed-by:
-
Dennis Dalessandro authored
Remove EPROM handling from the cdev which is used for user application data traffic. Reviewed-by:
-
Dennis Dalessandro authored
Remove UI char device which exposes direct access to registers for user space. This was put in to aid in debugging the hardware. We are looking into alternatives means of providing the same functionality. This removes another char device from HFI1's footprint. Reviewed-by:
-
Dennis Dalessandro authored
hfi1 current exports a cdev that can be used to target all of the hfi's in the system. However there is a problem with this approach in that the devices could be on different subnets. This is a problem that user space can figure out and explicitly tell the driver on which device to create a context. Remove the multi-purpose cdev leaving a dedicated cdev for each port. Also remove the striping capability that is dependent upon the user choosing the multi-purpose cdev. It is now up to user space to determine how to stripe contexts. Reviewed-by:
-
Dennis Dalessandro authored
Remove the usage of an anti-pattern goto in hfi1_cdev_init to improve code readability. Suggested-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by:
-
Jianxin Xiong authored
During the processing of a user SDMA request, if there was an error before the request counter was increased, the state of the packet queue could be updated incorrectly, causing the counter to underflow. As the result, the process could get stuck later since the counter could never get back to 0. This patch adds a condition to guard the packet queue update so that the counter is only decreased if it has been increased before the error happens. Reviewed-by:
Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by:
-
Jubin John authored
Building the qib driver with gcc version 6.1.0 raises the following build warning: drivers/infiniband/hw/qib/qib_iba7322.c:1311:39: warning: 'qib_7322_intr_msgs' defined but not used [-Wunused-const-variable=] static const struct qib_hwerror_msgs qib_7322_intr_msgs[] = { ^~~~~~~~~~~~~~~~~~ Remove the unused qib_7322_intr_msgs[] Reviewed-by:Jubin John <jubin.john@intel.com> Signed-off-by:
-
Ira Weiny authored
This comment was old, the MTU enums have been defined. Reviewed-by:
-
Jubin John authored
sdma_event_names[] is only used within CONFIG_SDMA_VERBOSITY ifdefs, so when CONFIG_SDMA_VERBOSITY is disabled, it results in the following 0-day build warning: >> drivers/infiniband/hw/hfi1/sdma.c:137:27: warning: 'sdma_event_names' >> defined but not used [-Wunused-const-variable=] static const char * const sdma_event_names[] = { ^~~~~~~~~~~~~~~~ This occurs on the following compiler: compiler: gcc-6 (Debian 6.1.1-1) 6.1.1 20160430 For more information check: https://lists.01.org/pipermail/kbuild-all/2016-May/020060.html Fix this warning by defining sdma_event_name[] only within the CONFIG_SDMA_VERBOSITY ifdefs. Reported-by:kbuild test robot <fengguang.wu@intel.com> Reviewed-by:
-
Jubin John authored
Use kzalloc_node instead of kzalloc for rdmavt memory region segment allocation to optimize for performance on NUMA platforms. Reviewed-by:
-
Mike Marciniszyn authored
The usage of the various vmalloc APIs do not consistently zero memory when allocating the swqe. Insure zeroing variants are used. Reviewed-by:
-
Mitko Haralanov authored
Commit e88c9271 ("IB/hfi1: Fix buffer cache corner case which may cause corruption") introduced a bug which may cause a reference count of a interval RB node to be leaked in the case where an SDMA transfer from that node completes at the same time as the node is being extended. If a node is being extended, it is first removed from the RB tree in order to be processed without the risk of an invalidation event removing the node at the same time. If a SDMA completion happens during that time, the completion handler will fail to find the node in the RB tree and, therefore, fail to correctly decrement its refcount. This leaves the node in the tree and its pages pinned for the duration of the user process. To prevent this from happening the io vector adds a reference to the RB node, which is used during the SDMA completion instead of looking up the node in the RB tree. This change adds a performance improvement as a side effect by avoiding the RB tree lookup. Fixes: e88c9271 ("IB/hfi1: Fix buffer cache corner case which may cause corruption") Reviewed-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
- 13 May, 2016 16 commits
-
-
Muhammad Falak R Wani authored
It is safe to use RCU_INIT_POINTER() to NULL a pointer, instead of rcu_assign_pointer(). This results in slightly smaller/faster code. Signed-off-by:
Muhammad Falak R Wani <falakreyaz@gmail.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Ashutosh Dixit authored
If one iteration of the loop causes an error return and a later iteration doesn't, the later iteration causes the earlier error condition to be lost. This could result in driver probe succeeding when it should have failed. Therefore save off the error return in the loop itself rather than outside the loop. Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Jianxin Xiong authored
The opcode for "SEND Last with Invalidate" and "SEND Only with Invalidate" have been defined for RC in IBA Specification Vol 1 since Release 1.2. Add the definition to the header file in preparation of supporting these opcodes in rdmavt based drivers. Reviewed-by:
-
Jianxin Xiong authored
SC_USER needs to be the last send context type to ensure other send context types get their allocation when num_user_contexts is set to a large number. This fixes a panic when the module parameter num_user_contexts is set to 141 and larger. Reviewed-by:
-
Dean Luick authored
The handling of the congestion setting MAD packet only saved off the values, waiting for a congestion control table packet before going active. Instead, immediately apply the values. Reviewed-by:
-
Jakub Pawlak authored
Remove "IB" keyword from log messages. Correct comment for thermal sensor init function. Reviewed-by:
Jakub Pawlak <jakub.pawlak@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The priority of the send engines is higher than the CQ completion thread potentially causing completions to be starved for very fast interfaces. Change the CQ kthread to match the send engine threads to minimize this delay for ULP completion processing. Reviewed-by:
-
Jubin John authored
The hfi_rcvhdr tracepoint has the ctxt and eflags switched in the prototype of the trace event, compared to the args and usage of the trace function. Fix this by swapping these 2 fields in the trace event prototype. Reviewed-by:
-
Jubin John authored
While running perftests, there is a significant utilization of the random number daemon. This is due to the linux/random.h header being included in qp.c and verbs.c. However, none of the functions from this header are being used in these files, so remove the unnecessary header. Reviewed-by:
-
Mitko Haralanov authored
The interval RB tree management functions use handlers to store user-specific callback for the various tree operations. These handlers are put on a doubly-linked list. When a RB tree function is called, the list is searched for the handler of the particular tree. The list which holds the handlers is modified very rarely - when a handler is created and when a handler is removed. On the other hand, it is searched very often. This a perfect usage scenario for RCU. The result is a much lower overhead of traversing the list as most of the time no locking will be required. Reviewed-by:
-
Mike Marciniszyn authored
The guard is backwards, potentially causing the SDMA client to panic if a wait structure was not specified. psm and verbs are not exposed to the issue, but fix the code just to be correct. Fixes: a545f530 ("staging/rdma/hfi: fix CQ completion order issue") Reviewed-by:
-
Mike Marciniszyn authored
The code unconditionlly increments the pio wait counter making the counter inacurate and unusable. Fixes: 14553ca1 ("staging/rdma/hfi1: Adaptive PIO for short messages") Reviewed-by:
-
Dean Luick authored
The RESET_N bit of the ASIC_QSFPn_OE register is not used by the hardware. Remove code that tries to use it - it does nothing. Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
-
Easwar Hariharan authored
The external device configuration was incorrectly shifted to byte 3 of the 32 bit DC_HOST_COMM_SETTINGS instead of byte 0. This patch corrects the shift and provides the cable capability information in byte 0. Reviewed-by:
-
Easwar Hariharan authored
The function level reset in init_chip() and subsequent write of all 1s to the ASIC_QSFP registers effectively resets attached active and optical QSFP modules that pay attention to the RESET_N pin. We subsequently try to access the QSFP management interface to qualify and tune the channel and fabric SerDes before enough time (2 seconds per SFF 8679 spec for QSFP28 modules) has elapsed for the module to finish initialization. This fails and causes the failure of the channel tuning algorithm, preventing us from bringing the link up. This patch checks the port type prior to beginning channel and SerDes tuning, and if found to be QSFP, watches for the QSFP initialization complete interrupt, with a maximum timeout of 2 seconds, to allow the initialization to complete. Reviewed-by:
-
Easwar Hariharan authored
QSFP modules can raise an interrupt to inform us of expected conditions while the link is down, such as RX power low. Actively ignore these conditions when the link is down as they only add reporting noise. Continue reporting conditions that are valid at all times, such as temperature alarms and warnings. Reviewed-by:
-
- 12 May, 2016 7 commits
-
-
Doug Ledford authored
-
Saeed Mahameed authored
Adding the needed mlx5_ifc hardware bits and structs for the following features: * Add vport to steering commands for SRIOV ACL support * Add mlcr, pcmr and mcia registers for dump module EEPROM * Add support for FCS, beacon led and disable_link bits to hca caps * Add CQE period mode bit in CQ context for CQE based CQ moderation support * Add umr SQ bit for fragmented memory registration * Add needed bits and caps for Striding RQ support In-order to avoid possible future conflicts between rdma and net-next we added all expected updates to this file for this release. If more changes will be submitted, we plan to do it only through one of the subsystems, probably net-next. All updated bits in this patch will be later used in the up-coming submissions to net-next and rdma trees. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Matan Barak <matanb@mellanox.com> Acked-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
All reserved fields after early_vf_enable are off by 1, since early_vf_enable was not explicitly declared as array of size 1. Reserved field before cqe_zip had a wrong size, it should be 0x80 + 0x3f. Fixes: b0844444 ("net/mlx5_core: Introduce access function to read internal timer ") Fixes: b4ff3a36 ("net/mlx5: Use offset based reserved field names in the IFC header file") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by:
Sagi Grimberg <sai@grimberg.m> Reviewed-by:
-
Bart Van Assche authored
Since all srp_map_finish_fr() callers pass a non-zero value as the fourth argument (sg_nents), the sg_nents == 0 check in that function can be removed. Add a count == 0 check in the caller of that function. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
-
Bart Van Assche authored
The srp_queuecommand() function translates ENOMEM into QUEUE_FULL which causes the SCSI mid-layer to retry the command. All other error codes are translated into DID_ERROR which causes the SCSI command to fail. Return E2BIG if mapping will always fail to prevent that the SCSI mid-layer keeps resubmitting a command forever. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by:
-
