There is no point in having __KERNEL__ ifdefs in headers not exported to
userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Felker <dalias@libc.org>

Ensure there is an order for the selects.  Also remove a duplicate
one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Felker <dalias@libc.org>

The sh build is full of warnings when building with gcc 9.2.1.  While
fixing those would be great, at least avoid failing the build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Felker <dalias@libc.org>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Rich Felker <dalias@libc.org>

Drop all configs with the CONFIG_SOC_CAMERA prefix since those
have been removed.

SOC_CAMERA support for the sh architecture was removed a long time ago.
Drop it from the configs.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Rich Felker <dalias@libc.org>

The SH implementation never called stacktrace_ops.stack().
Presumably this was copied from the x86 implementation.

Hence remove the method, and all implementations (most of them are
dummies).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>

  - Convert from printk() to pr_*(),
  - Add missing continuations.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>

  - Convert from printk() to pr_*(),
  - Add missing continuations,
  - Join broken messages.

Note that printk(KERN_DEBUG ...) is retained, to preserve behavior
(pr_debug() is a dummy if DEBUG is not defined).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>

  - Convert from printk() to pr_*(),
  - Add missing continuation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>

Rejoin the broken lines by using pr_cont().
Convert the remaining printk() calls to pr_*() while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>

Rejoin the broken lines by dropping the log level parameters and using
pr_cont().
Use "%px" to print sensible addresses in call traces.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>

Rejoin the broken lines by using pr_cont().
Convert the remaining printk() calls to pr_*() while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rich Felker <dalias@libc.org>

This reverts commit 8b92f348.

"data" became the log level in commit 539e786c ("sh: add loglvl
to show_trace()"), so we do need to keep the printk() before the
continuation in print_trace_address().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>

This reverts commit 2deebe4d.

printk_address() is always used as a continuation of the previous
logging, hence it should not include a log level.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>

Somewhere along the patch handling path, both the old "printk(KERN_ALERT
....)" and the new "pr_alert(...)" were retained, leading to the
duplicate printing of "PC:".

Drop the old one.

Fixes: eaabf98b ("sh: fault: modernize printing of kernel messages")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>

As of commit 37744fee ("sh: remove sh5 support"), support for
the SH5-based Cayman platform can no longer be selected.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>

Since the removal of core support for SH5, Cayman support can no longer
be selected.

Fixes: 37744fee ("sh: remove sh5 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>

Fix typo: "triger" --> "trigger"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: Rich Felker <dalias@libc.org>

This reverts commit d1f56f31.

__delay() is an internal implementation detail on several architectures.
Drivers should not call __delay() directly, as it has non-standardized
semantics, or may not even exist.
Hence there is no need to export __delay() to modules.

See also include/asm-generic/delay.h:

    /* Undefined functions to get compile-time errors */
    ...
    extern void __delay(unsigned long loops);
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>

Trying to build the kernel with CONFIG_INFINIBAND_USER_ACCESS enabled fails

     ERROR: "__get_user_unknown" [drivers/infiniband/core/ib_uverbs.ko] undefined!

with on SH since the kernel misses a 64-bit implementation of get_user().

Implement the missing 64-bit get_user() as __get_user_u64(), matching the
already existing __put_user_u64() which implements the 64-bit put_user().
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Rich Felker <dalias@libc.org>

Function dma_alloc_coherent use in buf already zeroes out memory,
so memset is not needed.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Rich Felker <dalias@libc.org>

The pgd kmem_cache allocation both specified __GFP_ZERO and had a
constructor which makes no sense.  Remove __GFP_ZERO and zero the user
parts of the pgd explicitly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Rich Felker <dalias@libc.org>

Pull x86 fix from Ingo Molnar:
 "A single fix for a potential deadlock when printing a message about
  spurious interrupts"

* tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/i8259: Use printk_deferred() to prevent deadlock

Merge tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - clean the generated moc file for xconfig

 - fix xconfig bugs, and revert some bad commits

* tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove redundant FORCE definition in scripts/Makefile.modpost
  kconfig: qconf: remove wrong ConfigList::firstChild()
  Revert "kconfig: qconf: don't show goback button on splitMode"
  Revert "kconfig: qconf: Change title for the item window"
  kconfig: qconf: remove "goBack" debug message
  kconfig: qconf: use delete[] instead of delete to free array
  kconfig: qconf: compile moc object separately
  kconfig: qconf: use if_changed for qconf.moc rule
  modpost: explain why we can't use strsep

Pull KVM fixes from Paolo Bonzini:
 "Bugfixes and strengthening the validity checks on inputs from new
  userspace APIs.

  Now I know why I shouldn't prepare pull requests on the weekend, it's
  hard to concentrate if your son is shouting about his latest Minecraft
  builds in your ear. Fortunately all the patches were ready and I just
  had to check the test results..."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM
  KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
  KVM: arm64: Don't inherit exec permission across page-table levels
  KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions
  KVM: nVMX: check for invalid hdr.vmx.flags
  KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE
  selftests: kvm: do not set guest mode flag

The same code exists a few lines above.

Fixes: 436b2ac6 ("modpost: invoke modpost only when input files are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This function returns the first child object, but the returned pointer
is not compatible with (ConfigItem *).

Commit cc1c08ed ("kconfig: qconf: don't show goback button on
splitMode") uncovered this issue because using the pointer from this
function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411)

This function does not work. Remove.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull networking fixes from David Miller:

 1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.

 2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.

 3) Fix several clang issues on powerpc in selftests, from Tanner Love.

 4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
    Viro.

 5) Out of bounds access in mlx5e driver, from Raed Salem.

 6) Fix transfer buffer memleak in lan78xx, from Johan Havold.

 7) RCU fixups in rhashtable, from Herbert Xu.

 8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.

 9) vxlan FDB dump must be done under RCU, from Ido Schimmel.

10) Fix use after free in mlxsw, from Ido Schimmel.

11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.

12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
    Thiagarajan.

13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.

14) Fix bpf program reference count leaks in mlx5 during
    mlx5e_alloc_rq(), from Xin Xiong.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
  vxlan: fix memleak of fdb
  rds: Prevent kernel-infoleak in rds_notify_queue_get()
  net/sched: The error lable position is corrected in ct_init_module
  net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
  net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
  net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
  net/mlx5e: CT: Support restore ipv6 tunnel
  net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
  ionic: unlock queue mutex in error path
  atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
  net: ethernet: mtk_eth_soc: fix MTU warnings
  net: nixge: fix potential memory leak in nixge_probe()
  devlink: ignore -EOPNOTSUPP errors on dumpit
  rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
  MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
  selftests/bpf: fix netdevsim trap_flow_action_cookie read
  ipv6: fix memory leaks on IPV6_ADDRFORM path
  net/bpfilter: Initialize pos in __bpfilter_process_sockopt
  igb: reinit_locked() should be called with rtnl_lock
  e1000e: continue to init PHY even when failed to disable ULP
  ...

Pull thread fix from Christian Brauner:
 "A simple spelling fix for dequeue_synchronous_signal()"

* tag 'for-linus-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  signal: fix typo in dequeue_synchronous_signal()

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

 - Fix libtraceevent build with binutils 2.35

 - Fix memory leak in process_dynamic_array_len in libtraceevent

 - Fix 'perf test 68' zstd compression for s390

 - Fix record failure when mixed with ARM SPE event

* tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  libtraceevent: Fix build with binutils 2.35
  perf tools: Fix record failure when mixed with ARM SPE event
  perf tests: Fix test 68 zstd compression for s390
  tools lib traceevent: Fix memory leak in process_dynamic_array_len

When vxlan interface is deleted, all fdbs are deleted by vxlan_flush().
vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains
all-zeros-mac because it is deleted by vxlan_uninit().
But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac
and default vni.
So, the fdb, which contains both all-zeros-mac and non-default vni
will not be deleted.

Test commands:
    ip link add vxlan0 type vxlan dstport 4789 external
    ip link set vxlan0 up
    bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \
	    src_vni 10000 self permanent
    ip link del vxlan0

kmemleak reports as follows:
unreferenced object 0xffff9486b25ced88 (size 96):
  comm "bridge", pid 2151, jiffies 4294701712 (age 35506.901s)
  hex dump (first 32 bytes):
    02 00 00 00 ac 00 00 01 40 00 09 b1 86 94 ff ff  ........@.......
    46 02 00 00 00 00 00 00 a7 03 00 00 12 b5 6a 6b  F.............jk
  backtrace:
    [<00000000c10cf651>] vxlan_fdb_append.part.51+0x3c/0xf0 [vxlan]
    [<000000006b31a8d9>] vxlan_fdb_create+0x184/0x1a0 [vxlan]
    [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
    [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
    [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
    [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
    [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
    [<00000000dff433e7>] netlink_unicast+0x18e/0x250
    [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
    [<000000002ed55153>] ____sys_sendmsg+0x237/0x260
    [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
    [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
    [<00000000a8f875d2>] do_syscall_64+0x56/0xe0
    [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff9486b1c40080 (size 128):
  comm "bridge", pid 2157, jiffies 4294701754 (age 35506.866s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 f8 dc 42 b2 86 94 ff ff  ..........B.....
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  backtrace:
    [<00000000a2981b60>] vxlan_fdb_create+0x67/0x1a0 [vxlan]
    [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
    [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
    [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
    [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
    [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
    [<00000000dff433e7>] netlink_unicast+0x18e/0x250
    [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
    [<000000002ed55153>] ____sys_sendmsg+0x237/0x260
    [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
    [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
    [<00000000a8f875d2>] do_syscall_64+0x56/0xe0
    [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 3ad7a4b1 ("vxlan: support fdb and learning in COLLECT_METADATA mode")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull pin control fix from Linus Walleij:
 "A single last minute pin control fix to the Qualcomm driver fixing
  missing dual edge PCH interrupts"

* tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180

This reverts commit cc1c08ed.

Maxim Levitsky reports 'make xconfig' crashes since that commit
(https://lkml.org/lkml/2020/7/18/411)

Or, the following is simple test code that makes it crash:

    menu "Menu"

    config FOO
            bool "foo"
            default y

    menuconfig BAR
            bool "bar"
            depends on FOO

    endmenu

Select the Split View mode, and double-click "bar" in the right
window, then you will see Segmentation fault.

When 'last' is not set for symbolMode, the following code in
ConfigList::updateList() calls firstChild().

  item = last ? last->nextSibling() : firstChild();

However, the pointer returned by ConfigList::firstChild() does not
seem to be compatible with (ConfigItem *), which seems another bug.

I'd rather want to reconsider whether hiding the goback icon is the
right thing to do.

In the following test code, the Split View shows "Menu2" and "Menu3"
in the right window. You can descend into "Menu3", but there is no way
to ascend back to "Menu2" from "Menu3".

    menu "Menu1"

    config FOO
            bool "foo"
            default y

    menu "Menu2"
            depends on FOO

    menu "Menu3"

    config BAZ
            bool "baz"

    endmenu

    endmenu

    endmenu

It is true that the goback button is currently not functional due to
yet another bug, but hiding the problem is not the right way to go.

Anyway, Segmentation fault is fatal. Revert the offending commit for
now, and we should find the right solution.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This reverts commit 5752ff07.

It added dead code to ConfigList:ConfigList().

The constructor of ConfigList has the initializer, mode(singleMode).

    if (mode == symbolMode)
           setHeaderLabels(QStringList() << "Item" << "Name" << "N" << "M" << "Y" << "Value");
    else
           setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");

... always takes the else part.

The change to ConfigList::updateSelection() is strange too.
When you click the split view icon for the first time, the titles in
both windows show "Option". After you click something in the right
window, the title suddenly changes to "Item".

ConfigList::updateSelection() is not the right place to do this,
at least. It was not a good idea, I think.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Every time the goback icon is clicked, the annoying message "goBack"
is displayed on the console.

I guess this line is the left-over debug code of commit af737b4d
("kconfig: qconf: simplify the goBack() logic").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

cppcheck reports "Mismatching allocation and deallocation".

$ cppcheck scripts/kconfig/qconf.cc
Checking scripts/kconfig/qconf.cc ...
scripts/kconfig/qconf.cc:1242:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
  delete data;
         ^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
 char *data = new char[count + 1];
              ^
scripts/kconfig/qconf.cc:1242:10: note: Mismatching allocation and deallocation: data
  delete data;
         ^
scripts/kconfig/qconf.cc:1255:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
  delete data;
         ^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
 char *data = new char[count + 1];
              ^
scripts/kconfig/qconf.cc:1255:10: note: Mismatching allocation and deallocation: data
  delete data;
         ^

Fixes: c4f7398b ("kconfig: qconf: make debug links work again")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Currently, qconf.moc is included from qconf.cc but they can be compiled
independently.

When you modify qconf.cc, qconf.moc does not need recompiling.

Rename qconf.moc to qconf-moc.cc, and split it out as an independent
compilation unit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Regenerate qconf.moc when the moc command is changed.

This also allows 'make mrproper' to clean it up. Previously, it was
not cleaned up because 'clean-files += qconf.moc' was missing.
Now 'make mrproper' correctly cleans it up because files listed in
'targets' are cleaned.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2020-07-31

The following pull-request contains BPF updates for your *net* tree.

We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).

The main changes are:

1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.

2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
   btf_vmlinux is available, from Peilin Ye.

3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.

4) Fix a cgroup sockopt verifier test by specifying expected attach type,
   from Jean-Philippe Brucker.

Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a05 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.

Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:

int btf_resolve_helper_id(struct bpf_verifier_log *log,
                          const struct bpf_func_proto *fn, int arg)
{
        int id;

        if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
                return -EINVAL;
        id = fn->btf_id[arg];
        if (!id || id > btf_vmlinux->nr_types)
                return -EINVAL;
        return id;
}

Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>