- 15 Jul, 2022 36 commits
-
-
Hans Verkuil authored
Add a dynamic array test control to help test support for this feature. Acked-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Tested-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Hans Verkuil authored
Implement support for dynamically allocated arrays. Most of the changes concern keeping track of the number of elements of the array and the number of elements allocated for the array and reallocating memory if needed. Acked-by:
-
Hans Verkuil authored
Add a new flag that indicates that this control is a dynamically sized array. Also document this flag. Currently dynamically sized arrays are limited to one dimensional arrays, but that might change in the future if there is a need for it. The initial use-case of dynamic arrays are stateless codecs. A frame can be divided in many slices, so you want to provide an array containing slice information for each slice. Typically the number of slices is small, but the standard allow for hundreds or thousands of slices. Dynamic arrays are a good solution since sizing the array for the worst case would waste substantial amounts of memory. Acked-by:
-
Vikash Garodia authored
UBWC configuration parameters would vary across video hardware generations. At the same time, driver is expected to configure these parameters, without relying on video firmware to use the default configurations. Setting the configuration parameters for sc7280. Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Hans Verkuil authored
Fix a smatch error: drivers/media/platform/qcom/venus/helpers.c: drivers/media/platform/qcom/venus/helpers.c:678 venus_helper_get_bufreq() error: we previously assumed 'req' could be null (see line 674) After checking how venus_helper_get_bufreq() is called it is clear that req is never NULL, so just drop the checks. Signed-off-by:
-
Tommaso Merciai authored
Add ov5693_of_match. Device tree support Signed-off-by:
Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Reviewed-by:
Daniel Scally <djrscally@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Tommaso Merciai authored
Add documentation of device tree in YAML schema for the OV5693 CMOS image sensor from Omnivision Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Tommaso Merciai authored
Add support for ACPI-based platforms that specify the clock frequency by using the "clock-frequency" property instead of specifying a clock provider reference Signed-off-by:
-
Tommaso Merciai authored
Rename clk pdata pointer into xvclk (system clock input). Same for clk_rate into xvclk_rate. This is more explicit Signed-off-by:
-
Tommaso Merciai authored
Add missing "dvdd" (Digital circuit power) entry into ov5693_supply_names array Signed-off-by:
-
Tommaso Merciai authored
Instead of hardcode OV5693_NUM_SUPPLIES in a define is better use ARRAY_SIZE function to count the number of supplies from ov5693_supply_names array Signed-off-by:
-
Daniel Scally authored
Where iteration over links for an entity is clearly assuming that all of those links are data links, use the new iterator to guarantee that assumption is met. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Scally authored
Iterating over the links for an entity is a somewhat common need through the media subsystem, but generally the assumption is that they will all be data links. To meet that assumption add a new macro that iterates through an entity's links and skips non-data links. Signed-off-by:
-
Marek Vasut authored
Implement V4L2_SEL_TGT_CROP_BOUNDS query in get_selection subdev op for this sensor. This is required e.g. to bind it to STM32MP15x DCMI. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by:
-
Tomi Valkeinen authored
stm32-dcmi calls its source subdev with v4l2_subdev_call() using a v4l2_subdev_state constructed on stack. This means that init_cfg is never called for that state, and a source subdev that depends on the init_cfg call may break. A new macro has been added for this particular purpose, which properly initializes the state, so let's use v4l2_subdev_call_state_try() here. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
-
Tomi Valkeinen authored
Add a helper macro for the situations where a non-MC driver needs to call a state-operation (operation which takes a subdev state as a parameter) in try-context in another subdev. The macro allocates a new subdev state for the called subdev and frees the state afterwards. An example use case is a media platform driver testing if a v4l2_subdev_format would be accepted by a source subdev. This should not be used in MC drivers. Signed-off-by:
-
Hans Verkuil authored
VIDEO_V4L2 no longer exists, instead use VIDEO_DEV. Without this change this driver cannot be selected. Signed-off-by:
-
Laurent Pinchart authored
The VIDEO_V4L2_SUBDEV_API Kconfig symbol is mostly selected automatically, with a a handful of drivers still using it as a dependency. Fix them to use selection, and drop the symbol title text to not expose it for manual selection. Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Yang Yingliang authored
Add the missing gpiod_set_value_cansleep() and clk_disable_unprepare() before return from ov7251_set_power_on() in the error handling case. Fixes: 9e1d3012 ("media: i2c: Remove .s_power() from ov7251") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
The sun6i-mipi-csi2 and sun6i-a83t-mipi-csi2 drivers depend on the generic MIPI D-PHY support. Select it. This fixes a linking problem when either of these drivers is enabled and GENERIC_PHY_MIPI_DPHY is disabled. Signed-off-by:
-
Laurent Pinchart authored
Extend the format sanitization code in the framework to handle invalid values for the colorspace-related fields. Signed-off-by:
-
Laurent Pinchart authored
The helper functions that test validity of colorspace-related fields use the last value of the corresponding enums. This isn't very future-proof, as there's a high chance someone adding a new value may forget to update the helpers. Add new "LAST" entries to the enumerations to improve this, and keep them private to the kernel. Signed-off-by:
-
Laurent Pinchart authored
Extend vivid to support the newly added YUVA and YUVX pixel formats through the TPG. Signed-off-by:
-
Laurent Pinchart authored
Extend the TPG to support generating the newly added YUVA and YUVX pixel formats. Signed-off-by:
-
Laurent Pinchart authored
The new YUVA and YUVX are permutations of the existing AYUV and XYUV formats. They are use by the NXP i.MX8 ISI hardware. Signed-off-by:
-
Chen-Yu Tsai authored
This partially reverts commit fd9f8050, and changes things so that the capability string fields of the encoder conform to their requirements. The driver name field should contain the actual driver name, not some otherwise unused string macro from the driver. To make this clear, copy the name from the driver's name field. The card name for the video encoder previously held a static platform name that was fixed to match MT8173. This obviously doesn't make sense for newer chips. Since commit fd9f8050 ("media: mediatek: vcodec: Change encoder v4l2 capability value"), this field was changed to hold the driver's name, or "mtk-vcodec-dec". This doesn't make much sense either, since this still doesn't reflect what chip this is. Instead, fill in the card name with "MTxxxx video encoder" with the proper chip number. Since commit f2d8b691 ("media: v4l: ioctl: Set bus_info in v4l_querycap()"), the V4L2 core provides a default value for the bus_info field for platform and PCI devices. This value will match the default value for media devices added by commit cef69974 ("media: mc: Set bus_info in media_device_init()"). These defaults are stable and device-specific. Drop the custom capability bus_info from the mtk-vcodec encoder driver, and use the defaults. As this patch removes the last usage of MTK_VCODEC_DRV_NAME, remove the macro as well. Fixes: fd9f8050 ("media: mediatek: vcodec: Change encoder v4l2 capability value") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Signed-off-by:
-
Chen-Yu Tsai authored
This partially reverts commit a8a7a278, and changes things so that the capability string fields of the decoder conform to their requirements. This recent change caused ChromeOS's decoder to no longer function. This is due to ChromeOS using the driver name field to match the video device with its accompanying media device. After the change, they no longer matched. The driver name field should contain the actual driver name, not some otherwise unused string macro from the driver. To make this clear, copy the name from the driver's name field. The card name for the video decoder previously held a static platform name that was fixed to match MT8173. This obviously doesn't make sense for newer chips. Since commit a8a7a278 ("media: mediatek: vcodec: Change decoder v4l2 capability value"), this field was changed to hold the driver's name, or "mtk-vcodec-dec". This doesn't make much sense either, since this still doesn't reflect what chip this is. Instead, fill in the card name with "MTxxxx video decoder" with the proper chip number. Since commit f2d8b691 ("media: v4l: ioctl: Set bus_info in v4l_querycap()"), the V4L2 core provides a default value for the bus_info field for platform and PCI devices. This value will match the default value for media devices added by commit cef69974 ("media: mc: Set bus_info in media_device_init()"). These defaults are stable and device-specific. Drop the custom capability bus_info from the mtk-vcodec decoder driver, and use the defaults. This also fixes the long standing issue where the media device used for the stateless decoder didn't have its bus_info set, and would never match its accompanying video device. Fixes: a8a7a278 ("media: mediatek: vcodec: Change decoder v4l2 capability value") Signed-off-by:
-
Marko Mäkelä authored
Pressing a button on a remote control unit will typically lead to messages being sent several times per second until the button is released. Some remote control units indicate long key presses by sending special "repeat" messages, for which the protocol driver calls rc_repeat(). Other units repeat the same message over and over, which will be handled by calling rc_keydown(). The function rc_keydown() never set the LIRC "repeat" flag to distinguish repeated messages that were sent due to a long keypress, and messages sent due to repeated short keypresses. While a user-space program may implement special logic to distinguish long keypresses, it is much simpler to be able to rely on the flag. Commit de142c32 ("media: lirc: implement reading scancode") would never set the LIRC_SCANCODE_FLAG_REPEAT flag. Commit b66218fd ("media: lirc: ensure lirc device receives nec repeats") fixed it up for rc_repeat() but not rc_keydown(). Signed-off-by:
Marko Mäkelä <marko.makela@iki.fi> Co-developed-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Oliver Neukum authored
Drivers should use dev_err() Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Yang Yingliang authored
After 'buf_in' change to pointer, the sizeof() is not correct buffer size, it should be MAX_PACKET. Fixes: b3f820b9 ("media: igorplugusb: respect DMA coherency") Reported-by:
-
Yunke Cao authored
Add documentation for vimc-lens. Add a lens into the vimc topology graph. Signed-off-by:
Yunke Cao <yunkec@google.com> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Daniel Oakley authored
Future additions to the ent_config[] could break the association between the index of the struct vimc_ent_config entries in the ent_config[] array, and the index defined by the enum proposed in the previous patch. Using designated initializers solves this by linking the 2 together clearly in code and prevents the array not reflecting the enum. There is no functional change intended. Suggested-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
Daniel Oakley <daniel.oakley@ideasonboard.com> Signed-off-by:
-
Daniel Oakley authored
The data_links array was hard to read and understand. By implementing enumerated vimc data link entities, clarity has been improved when defining data_links. This therefore should help new programmers to understand the codebase better. There is no functional change intended. Suggested-by:
-
Daniel Oakley authored
When introducing the lens controller, it became apparent that the vimc entity type names were hard to understand, e.g. vimc_len_type refers to the lens. The names of the vimc entity types have been expanded to make the code easier to understand. There is no functional change intended. Suggested-by:
-
Yunke Cao authored
Add lens to vimc driver and link them with sensors using ancillary links. Provides an example of ancillary link usage.The lens supports FOCUS_ABSOLUTE control. Test example: With default vimc topology > media-ctl -p Media controller API version 5.18.0 ... - entity 28: Lens A (0 pad, 0 link) type V4L2 subdev subtype Lens flags 0 device node name /dev/v4l-subdev6 - entity 29: Lens B (0 pad, 0 link) type V4L2 subdev subtype Lens flags 0 device node name /dev/v4l-subdev7 > v4l2-ctl -d /dev/v4l-subdev7 -C focus_absolute focus_absolute: 0 Reviewed-by: -
Sakari Ailus authored
For camera sensor devices the firmware information of which comes from non-DT (or some ACPI variants), the kernel makes the information visible to the drivers in a form similar to DT. This takes place through device's secondary fwnodes, in which case also the secondary fwnode needs to be heterogenously (endpoint vs. device) matched. Fixes: 1f391df4 ("media: v4l2-async: Use endpoints in __v4l2_async_nf_add_fwnode_remote()") Signed-off-by:
-
- 08 Jul, 2022 4 commits
-
-
Ming Qian authored
For format V4L2_PIX_FMT_VC1_ANNEX_L, the amphion vpu requires driver to help insert some custom startcode before sequence and frame. but only the first sequence startcode is needed, the extra startcode will cause decoding error. So after seek, we don't need to insert the sequence startcode. In other words, for V4L2_PIX_FMT_VC1_ANNEX_L, the vpu doesn't support dynamic resolution change. Fixes: 145e9363 ("media: amphion: implement malone decoder rpc interface") Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
-
Ming Qian authored
1. prevent to allocate buffer to firmware during abort 2. release buffer when clear the slots Fixes: 6de8d628 ("media: amphion: add v4l2 m2m vpu decoder stateful driver") Signed-off-by:
-
Ezequiel Garcia authored
Commit 1f82f2df ("media: hantro: Enable H.264 on Rockchip VDPU2") enabled H.264 on some SoCs with VDPU2 cores. This had the side-effect of exposing H.264 coded format as supported on RK3399. Fix this and clarify how the codec is explicitly disabled on RK3399 on this driver. Fixes: 1f82f2df ("media: hantro: Enable H.264 on Rockchip VDPU2") Signed-off-by:
-
Akira Yokosawa authored
The \endgroup command at the bottom of a table added in commit 5374d8fb ("media: Add P010 video format") doesn't have a corresponding \begingroup command preceding it. This imbalance causes an build error in "make pdfdocs". Fix the issue by removing it. Signed-off-by:
Akira Yokosawa <akiyks@gmail.com> Fixes: 5374d8fb ("media: Add P010 video format") Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com> Cc: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
