- 13 Jan, 2024 10 commits
-
-
Jiri Pirko authored
Clsact/ingress qdisc is not the only one using shared block, red is also using it. The device tracking was originally introduced by commit 913b47d3 ("net/sched: Introduce tc block netdev tracking infra") for clsact/ingress only. Commit 94e2557d ("net: sched: move block device tracking into tcf_block_get/put_ext()") mistakenly enabled that for red as well. Fix that by adding a check for the binder type being clsact when adding device to the block->ports xarray. Reported-by:
Ido Schimmel <idosch@idosch.org> Closes: https://lore.kernel.org/all/ZZ6JE0odnu1lLPtu@shredder/ Fixes: 94e2557d ("net: sched: move block device tracking into tcf_block_get/put_ext()") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Tested-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Tested-by:
Victor Nogueira <victor@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
up->pending can be read without holding the socket lock, as pointed out by syzbot [1] Add READ_ONCE() in lockless contexts, and WRITE_ONCE() on write side. [1] BUG: KCSAN: data-race in udpv6_sendmsg / udpv6_sendmsg write to 0xffff88814e5eadf0 of 4 bytes by task 15547 on cpu 1: udpv6_sendmsg+0x1405/0x1530 net/ipv6/udp.c:1596 inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:657 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x257/0x310 net/socket.c:2192 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x78/0x90 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b read to 0xffff88814e5eadf0 of 4 bytes by task 15551 on cpu 0: udpv6_sendmsg+0x22c/0x1530 net/ipv6/udp.c:1373 inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:657 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2586 ___sys_sendmsg net/socket.c:2640 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2726 __do_sys_sendmmsg net/socket.c:2755 [inline] __se_sys_sendmmsg net/socket.c:2752 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2752 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b value changed: 0x00000000 -> 0x0000000a Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 15551 Comm: syz-executor.1 Tainted: G W 6.7.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+8d482d0e407f665d9d10@syzkaller.appspotmail.com Link: https://lore.kernel.org/netdev/0000000000009e46c3060ebcdffd@google.com/Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
-
Sneh Shah authored
Currently get/set_link_ksettings ethtool ops are dependent on PCS. When PCS is integrated, it will not have separate link config. Bypass configuring and checking PCS for integrated PCS. Fixes: aa571b62 ("net: stmmac: add new switch to struct plat_stmmacenet_data") Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by:
Sneh Shah <quic_snehshah@quicinc.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== mptcp: better validation of MPTCPOPT_MP_JOIN option Based on a syzbot report (see 4th patch in the series). We need to be more explicit about which one of the following flag is set by mptcp_parse_option(): - OPTION_MPTCP_MPJ_SYN - OPTION_MPTCP_MPJ_SYNACK - OPTION_MPTCP_MPJ_ACK Then select the appropriate values instead of OPTIONS_MPTCP_MPJ Paolo suggested to do the same for OPTIONS_MPTCP_MPC (5th patch) ==================== Link: https://lore.kernel.org/r/20240111194917.4044654-1-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
OPTIONS_MPTCP_MPC is a combination of three flags. It would be better to be strict about testing what flag is expected, at least for code readability. mptcp_parse_option() already makes the distinction. - subflow_check_req() should use OPTION_MPTCP_MPC_SYN. - mptcp_subflow_init_cookie_req() should use OPTION_MPTCP_MPC_ACK. - subflow_finish_connect() should use OPTION_MPTCP_MPC_SYNACK - subflow_syn_recv_sock should use OPTION_MPTCP_MPC_ACK Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <martineau@kernel.org> Fixes: 74c7dfbe ("mptcp: consolidate in_opt sub-options fields in a bitmask") Link: https://lore.kernel.org/r/20240111194917.4044654-6-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
syzbot reported that subflow_check_req() was using uninitialized data in subflow_check_req() [1] This is because mp_opt.token is only set when OPTION_MPTCP_MPJ_SYN is also set. While we are are it, fix mptcp_subflow_init_cookie_req() to test for OPTION_MPTCP_MPJ_ACK. [1] BUG: KMSAN: uninit-value in subflow_token_join_request net/mptcp/subflow.c:91 [inline] BUG: KMSAN: uninit-value in subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209 subflow_token_join_request net/mptcp/subflow.c:91 [inline] subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209 subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367 tcp_conn_request+0x153a/0x4240 net/ipv4/tcp_input.c:7164 subflow_v6_conn_request+0x3ee/0x510 tcp_rcv_state_process+0x2e1/0x4ac0 net/ipv4/tcp_input.c:6659 tcp_v6_do_rcv+0x11bf/0x1fe0 net/ipv6/tcp_ipv6.c:1669 tcp_v6_rcv+0x480b/0x4fb0 net/ipv6/tcp_ipv6.c:1900 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x1490 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Local variable mp_opt created at: subflow_check_req+0x6d/0x15d0 net/mptcp/subflow.c:145 subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367 CPU: 1 PID: 5924 Comm: syz-executor.3 Not tainted 6.7.0-rc8-syzkaller-00055-g5eff55d7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
subflow_finish_connect() uses four fields (backup, join_id, thmac, none) that may contain garbage unless OPTION_MPTCP_MPJ_SYNACK has been set in mptcp_parse_option() Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
-
Eric Dumazet authored
mp_opt->hmac contains uninitialized data unless OPTION_MPTCP_MPJ_ACK was set in mptcp_parse_option(). We must refine the condition before we call subflow_hmac_valid(). Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
-
Eric Dumazet authored
mptcp_parse_option() currently sets OPTIONS_MPTCP_MPJ, for the three possible cases handled for MPTCPOPT_MP_JOIN option. OPTIONS_MPTCP_MPJ is the combination of three flags: - OPTION_MPTCP_MPJ_SYN - OPTION_MPTCP_MPJ_SYNACK - OPTION_MPTCP_MPJ_ACK This is a problem, because backup, join_id, token, nonce and/or hmac fields could be left uninitialized in some cases. Distinguish the three cases, as following patches will need this step. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
-
Dmitry Antipov authored
When compiling with clang-18 and W=1, I've noticed the following warnings: drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1493:16: warning: cast from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to 'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to incompatible function type [-Wcast-function-type-strict] 1493 | mbox_cmd.fn = (octeon_mbox_callback_t)cn23xx_get_vf_stats_callback; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and: drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:432:16: warning: cast from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to 'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to incompatible function type [-Wcast-function-type-strict] 432 | mbox_cmd.fn = (octeon_mbox_callback_t)octeon_pfvf_hs_callback; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix both of the above by adjusting 'octeon_mbox_callback_t' to match actual callback definitions (at the cost of adding an extra forward declaration). Signed-off-by:Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by:
-
- 12 Jan, 2024 30 commits
-
-
Jakub Kicinski authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add a description to Wangxun's common code lib. Signed-off-by:
-
Claudiu Beznea authored
The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY is used with the ravb Ethernet driver. It has been discovered that when bringing the Ethernet interface down/up continuously, e.g., with the following sh script: $ while :; do ifconfig eth0 down; ifconfig eth0 up; done the link speed and duplex are wrong after interrupting the bring down/up operation even though the Ethernet interface is up. To recover from this state the following configuration sequence is necessary (executed manually): $ ifconfig eth0 down $ ifconfig eth0 up The behavior has been identified also on the Microchip SAMA7G5-EK board which runs the macb driver and uses the same PHY. The order of PHY-related operations in ravb_open() is as follows: ravb_open() -> ravb_phy_start() -> ravb_phy_init() -> of_phy_connect() -> phy_connect_direct() -> phy_attach_direct() -> phy_init_hw() -> phydev->drv->soft_reset() phydev->drv->config_init() phydev->drv->config_intr() phy_resume() kszphy_resume() The order of PHY-related operations in ravb_close is as follows: ravb_close() -> phy_stop() -> phy_suspend() -> kszphy_suspend() -> genphy_suspend() // set BMCR_PDOWN bit in MII_BMCR In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet). Thus, when opening the interface after it has been previously closed (via ravb_close()), the phydev->drv->config_init() and phydev->drv->config_intr() reach the KSZ9131 PHY driver via the ksz9131_config_init() and kszphy_config_intr() functions. KSZ9131 specifies that the MII management interface remains operational during SPD (Software Power-Down), but (according to manual): - Only access to the standard registers (0 through 31) is supported. - Access to MMD address spaces other than MMD address space 1 is possible if the spd_clock_gate_override bit is set. - Access to MMD address space 1 is not possible. The spd_clock_gate_override bit is not used in the KSZ9131 driver. ksz9131_config_init() configures RGMII delay, pad skews and LEDs by accessesing MMD registers other than those in address space 1. The datasheet for the KSZ9131 does not specify what happens if registers from an unsupported address space are accessed while the PHY is in SPD. To fix the issue the .soft_reset method has been instantiated for KSZ9131, too. This resets the PHY to the default state before doing any configurations to it, thus switching it out of SPD. Fixes: bff5b4b3 ("net: phy: micrel: add Microchip KSZ9131 initial driver") Signed-off-by:Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Horatiu Vultur authored
The HW has the capability to check each frame if it is a PTP frame, which domain it is, which ptp frame type it is, different ip address in the frame. And if one of these checks fail then the frame is not timestamp. Most of these checks were disabled except checking the field minorVersionPTP inside the PTP header. Meaning that once a partner sends a frame compliant to 8021AS which has minorVersionPTP set to 1, then the frame was not timestamp because the HW expected by default a value of 0 in minorVersionPTP. Fix this issue by removing this check so the userspace can decide on this. Fixes: cafc3662 ("net: micrel: Add PHC support for lan8841") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Divya Koppera <divya.koppera@microchip.com> Reviewed-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by:
-
Taehee Yoo authored
amt driver uses skb->cb for storing tunnel information. This job is worked before TC layer and then amt driver load tunnel info from skb->cb after TC layer. So, its cb area should not be overwrapped with CB area used by TC. In order to not use cb area used by TC, it skips the biggest cb structure used by TC, which was qdisc_skb_cb. But it's not anymore. Currently, biggest structure of TC's CB is tc_skb_cb. So, it should skip size of tc_skb_cb instead of qdisc_skb_cb. Fixes: ec624fe7 ("net/sched: Extend qdisc control block with tc control block") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Acked-by:
-
Jakub Kicinski authored
Sanjuán García, Jorge says: ==================== net: ethernet: ti: am65-cpsw: Allow for MTU values The am65-cpsw-nuss driver has a fixed definition for the maximum ethernet frame length of 1522 bytes (AM65_CPSW_MAX_PACKET_SIZE). This limits the switch ports to only operate at a maximum MTU of 1500 bytes. When combining this CPSW switch with a DSA switch connected to one of its ports this limitation shows up. The extra 8 bytes the DSA subsystem adds internally to the ethernet frame create resulting frames bigger than 1522 bytes (1518 for non VLAN + 8 for DSA stuff) so they get dropped by the switch. One of the issues with the the am65-cpsw-nuss driver is that the network device max_mtu was being set to the same fixed value defined for the max total frame length (1522 bytes). This makes the DSA subsystem believe that the MTU of the interface can be set to 1508 bytes to make room for the extra 8 bytes of the DSA headers. However, all packages created assuming the 1500 bytes payload get dropped by the switch as oversized. This series offers a solution to this problem. The max_mtu advertised on the network device and the actual max frame size configured on the switch registers are made consistent by letting the extra room needed for the ethernet headers and the frame checksum (22 bytes including VLAN). ==================== Link: https://lore.kernel.org/r/20240105085530.14070-1-jorge.sanjuangarcia@duagon.comSigned-off-by:
-
Sanjuán García, Jorge authored
The value of AM65_CPSW_MAX_PACKET_SIZE represents the maximum length of a received frame. This value is written to the register AM65_CPSW_PORT_REG_RX_MAXLEN. The maximum MTU configured on the network device should then leave some room for the ethernet headers and frame check. Otherwise, if the network interface is configured to its maximum mtu possible, the frames will be larger than AM65_CPSW_MAX_PACKET_SIZE and will get dropped as oversized. The switch supports ethernet frame sizes between 64 and 2024 bytes (including VLAN) as stated in the technical reference manual, so define AM65_CPSW_MAX_PACKET_SIZE with that maximum size. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Reviewed-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20240105085530.14070-2-jorge.sanjuangarcia@duagon.comSigned-off-by:
-
Zhu Yanjun authored
Fix the warnings when building virtio_net driver. " drivers/net/virtio_net.c: In function ‘init_vqs’: drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=] 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~ In function ‘virtnet_find_vqs’, inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8: drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534] 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~~~~~~~~~ drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/virtio_net.c: In function ‘init_vqs’: drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=] 4552 | sprintf(vi->sq[i].name, "output.%d", i); | ^~ In function ‘virtnet_find_vqs’, inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8: drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534] 4552 | sprintf(vi->sq[i].name, "output.%d", i); | ^~~~~~~~~~~ drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16 4552 | sprintf(vi->sq[i].name, "output.%d", i); " Reviewed-by:Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@linux.dev> Link: https://lore.kernel.org/r/20240104020902.2753599-1-yanjun.zhu@intel.comSigned-off-by:
-
Nithin Dabilpuram authored
RPM0 and RPM1 on the CN10KB SoC have 8 LMACs each, whereas RPM2 has only 4 LMACs. Similarly, the RPM0 and RPM1 have 256KB FIFO, whereas RPM2 has 128KB FIFO. This patch fixes an issue with improper TX credit programming for the RPM2 link. Fixes: b9d0fedc ("octeontx2-af: cn10kb: Add RPM_USX MAC support") Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by:
-
Jakub Kicinski authored
Nicolas Dichtel says: ==================== rtnetlink: allow to enslave with one msg an up interface The first patch fixes a regression, introduced in linux v6.1, by reverting a patch. The second patch adds a test to verify this API. ==================== Link: https://lore.kernel.org/r/20240108094103.2001224-1-nicolas.dichtel@6wind.comSigned-off-by:
-
Nicolas Dichtel authored
The goal is to check the following two sequences: > ip link set dummy0 up > ip link set dummy0 master bond0 down Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
-
Nicolas Dichtel authored
This reverts commit a4abfa62. The patch broke: > ip link set dummy0 up > ip link set dummy0 master bond0 down This last command is useful to be able to enslave an interface with only one netlink message. After discussion, there is no good reason to support: > ip link set dummy0 down > ip link set dummy0 master bond0 up because the bond interface already set the slave up when it is up. Cc: stable@vger.kernel.org Fixes: a4abfa62 ("net: rtnetlink: Enslave device before bringing it up") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240108094103.2001224-2-nicolas.dichtel@6wind.comSigned-off-by:
-
David Howells authored
rxrpc normally has the Don't Fragment flag set on the UDP packets it transmits, except when it has decided that DATA packets aren't getting through - in which case it turns it off just for the DATA transmissions. This can be a problem, however, for RESPONSE packets that convey authentication and crypto data from the client to the server as ticket may be larger than can fit in the MTU. In such a case, rxrpc gets itself into an infinite loop as the sendmsg returns an error (EMSGSIZE), which causes rxkad_send_response() to return -EAGAIN - and the CHALLENGE packet is put back on the Rx queue to retry, leading to the I/O thread endlessly attempting to perform the transmission. Fix this by disabling DF on RESPONSE packets for now. The use of DF and best data MTU determination needs reconsidering at some point in the future. Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org Acked-by:
-
Vladimir Oltean authored
After the blamed commit, we started doing this dereference for every NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system. static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev) { struct dsa_user_priv *p = netdev_priv(dev); return p->dp; } Which is obviously bogus, because not all net_devices have a netdev_priv() of type struct dsa_user_priv. But struct dsa_user_priv is fairly small, and p->dp means dereferencing 8 bytes starting with offset 16. Most drivers allocate that much private memory anyway, making our access not fault, and we discard the bogus data quickly afterwards, so this wasn't caught. But the dummy interface is somewhat special in that it calls alloc_netdev() with a priv size of 0. So every netdev_priv() dereference is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event with a VLAN as its new upper: $ ip link add dummy1 type dummy $ ip link add link dummy1 name dummy1.100 type vlan id 100 [ 43.309174] ================================================================== [ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8 [ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374 [ 43.330058] [ 43.342436] Call trace: [ 43.366542] dsa_user_prechangeupper+0x30/0xe8 [ 43.371024] dsa_user_netdevice_event+0xb38/0xee8 [ 43.375768] notifier_call_chain+0xa4/0x210 [ 43.379985] raw_notifier_call_chain+0x24/0x38 [ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8 [ 43.389120] netdev_upper_dev_link+0x70/0xa8 [ 43.393424] register_vlan_dev+0x1bc/0x310 [ 43.397554] vlan_newlink+0x210/0x248 [ 43.401247] rtnl_newlink+0x9fc/0xe30 [ 43.404942] rtnetlink_rcv_msg+0x378/0x580 Avoid the kernel oops by dereferencing after the type check, as customary. Fixes: 4c3f80d2 ("net: dsa: walk through all changeupper notifier functions") Reported-and-tested-by: syzbot+d81bcd883824180500c8@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/0000000000001d4255060e87545c@google.com/Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
-
Lin Ma authored
The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. Fixes: 14452ca3 ("net: qualcomm: rmnet: Export mux_id and flags to netlink") Signed-off-by:Lin Ma <linma@zju.edu.cn> Reviewed-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by:
-
Dmitry Safonov authored
The rules to link selftests are: > $(OUTPUT)/%_ipv4: %.c > $(LINK.c) $^ $(LDLIBS) -o $@ > > $(OUTPUT)/%_ipv6: %.c > $(LINK.c) -DIPV6_TEST $^ $(LDLIBS) -o $@ The intel test robot uses only selftest's Makefile, not the top linux Makefile: > make W=1 O=/tmp/kselftest -C tools/testing/selftests So, $(LINK.c) is determined by environment, rather than by kernel Makefiles. On my machine (as well as other people that ran tcp-ao selftests) GNU/Make implicit definition does use $(LDFLAGS): > [dima@Mindolluin ~]$ make -p -f/dev/null | grep '^LINK.c\>' > make: *** No targets. Stop. > LINK.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH) But, according to build robot report, it's not the case for them. While I could just avoid using pre-defined $(LINK.c), it's also used by selftests/lib.mk by default. Anyways, according to GNU/Make documentation [1], I should have used $(LDLIBS) instead of $(LDFLAGS) in the first place, so let's just do it: > LDFLAGS > Extra flags to give to compilers when they are supposed to invoke > the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added > to the LDLIBS variable instead. > LDLIBS > Library flags or names given to compilers when they are supposed > to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still > supported) alternative to LDLIBS. Non-library linker flags, such > as -L, should go in the LDFLAGS variable. [1]: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html Fixes: cfbab37b ("selftests/net: Add TCP-AO library") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401011151.veyYTJzq-lkp@intel.com/Signed-off-by:
Dmitry Safonov <dima@arista.com> Acked-by:
-
Arnd Bergmann authored
The ngbe driver needs phylink: arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset': wx_ethtool.c:(.text+0x458): undefined reference to `phylink_ethtool_nway_reset' arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_remove': ngbe_main.c:(.text+0x7c): undefined reference to `phylink_destroy' arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_open': ngbe_main.c:(.text+0xf90): undefined reference to `phylink_connect_phy' arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.o: in function `ngbe_mdio_init': ngbe_mdio.c:(.text+0x314): undefined reference to `phylink_create' Add the missing Kconfig description for this. Fixes: bc2426d7 ("net: ngbe: convert phylib to phylink") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Jakub Kicinski authored
I missed that Dany uses a different email address when tagging patches (drt@linux.ibm.com) and asked him if he's still actively working on ibmvnic. He doesn't really fall under our removal criteria, but he admitted that he already moved on to other projects. Reviewed-by:
-
Jakub Kicinski authored
We haven't heard from Ralf for two years, according to lore. We get a constant stream of "fixes" to ax25 from people using code analysis tools. Nobody is reviewing those, let's reflect this reality in MAINTAINERS. Subsystem AX.25 NETWORK LAYER Changes 9 / 59 (15%) (No activity) Top reviewers: [2]: mkl@pengutronix.de [2]: edumazet@google.com [2]: stefan@datenfreihafen.org INACTIVE MAINTAINER Ralf Baechle <ralf@linux-mips.org> Reviewed-by: -
Jakub Kicinski authored
Johan moved to maintaining the Zephyr Bluetooth stack, and we haven't heard from him on the ML in 3 years (according to lore), and seen any tags in git in 4 years. Trade the MAINTAINER entry for CREDITS, we can revert whenever Johan comes back to Linux hacking :) Subsystem BLUETOOTH SUBSYSTEM Changes 173 / 986 (17%) Last activity: 2023-12-22 Marcel Holtmann <marcel@holtmann.org>: Author 91cb4c19 2022-01-27 00:00:00 52 Committer edcb185f 2022-05-23 00:00:00 446 Tags 000c2fa2 2023-04-23 00:00:00 523 Johan Hedberg <johan.hedberg@gmail.com>: Luiz Augusto von Dentz <luiz.dentz@gmail.com>: Author d03376c1 2023-12-22 00:00:00 241 Committer da9065ca 2023-12-22 00:00:00 341 Tags da9065ca 2023-12-22 00:00:00 493 Top reviewers: [33]: alainm@chromium.org [31]: mcchou@chromium.org [27]: abhishekpandit@chromium.org INACTIVE MAINTAINER Johan Hedberg <johan.hedberg@gmail.com> Link: https://lore.kernel.org/r/20240109164517.3063131-6-kuba@kernel.orgSigned-off-by: -
Jakub Kicinski authored
We haven't seen much review activity from the liquidio maintainers for years. Reflect that reality in MAINTAINERS. Our scripts report: Subsystem CAVIUM LIQUIDIO NETWORK DRIVER Changes 30 / 87 (34%) Last activity: 2019-01-28 Derek Chickles <dchickles@marvell.com>: Tags ac93e2fa 2019-01-28 00:00:00 1 Satanand Burla <sburla@marvell.com>: Felix Manlunas <fmanlunas@marvell.com>: Tags ac93e2fa 2019-01-28 00:00:00 1 Top reviewers: [5]: simon.horman@corigine.com [4]: keescook@chromium.org [4]: jiri@nvidia.com INACTIVE MAINTAINER Satanand Burla <sburla@marvell.com> Acked-by:Derek Chickles <dchickles@marvell.com> Link: https://lore.kernel.org/r/20240109164517.3063131-5-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Thomas is still active in other bits of the kernel and beyond but not as much on the Marvell Ethernet devices. Our scripts report: Subsystem MARVELL MVNETA ETHERNET DRIVER Changes 54 / 176 (30%) (No activity) Top reviewers: [12]: hawk@kernel.org [9]: toke@redhat.com [9]: john.fastabend@gmail.com INACTIVE MAINTAINER Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by:Thomas Petazzoni <thomas.petazzoni@bootlin.com> Link: https://lore.kernel.org/r/20240109164517.3063131-4-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
mt7530 is a pretty active driver and last we have heard from Landen Chao on the list was March. There were total of 4 message from them in the last 2.5 years. I think it's time to move to CREDITS. Subsystem MEDIATEK SWITCH DRIVER Changes 94 / 169 (55%) Last activity: 2023-10-11 Arınç ÜNAL <arinc.unal@arinc9.com>: Author e94b590a 2023-08-19 00:00:00 12 Tags e94b590a 2023-08-19 00:00:00 16 Daniel Golle <daniel@makrotopia.org>: Author 91daa4f6 2023-04-19 00:00:00 17 Tags ac49b992 2023-10-11 00:00:00 20 Landen Chao <Landen.Chao@mediatek.com>: DENG Qingfang <dqfext@gmail.com>: Author 342afce1 2021-10-18 00:00:00 24 Tags 342afce1 2021-10-18 00:00:00 25 Sean Wang <sean.wang@mediatek.com>: Tags c288575f 2020-09-14 00:00:00 5 Top reviewers: [46]: f.fainelli@gmail.com [29]: andrew@lunn.ch [19]: olteanv@gmail.com INACTIVE MAINTAINER Landen Chao <Landen.Chao@mediatek.com> Acked-by:Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20240109164517.3063131-3-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
John is still active in other bits of the kernel but not much on the MediaTek ethernet switch side. Our scripts report: Subsystem MEDIATEK ETHERNET DRIVER Changes 81 / 384 (21%) Last activity: 2023-12-21 Felix Fietkau <nbd@nbd.name>: Author c6d96df9 2023-05-02 00:00:00 42 Tags c6d96df9 2023-05-02 00:00:00 48 John Crispin <john@phrozen.org>: Sean Wang <sean.wang@mediatek.com>: Author 880c2d4b 2019-06-03 00:00:00 5 Tags a5d75538 2020-04-07 00:00:00 7 Mark Lee <Mark-MC.Lee@mediatek.com>: Author 8d66a818 2019-11-14 00:00:00 4 Tags 8d66a818 2019-11-14 00:00:00 4 Lorenzo Bianconi <lorenzo@kernel.org>: Author 7cb8cd4d 2023-12-21 00:00:00 98 Tags 7cb8cd4d 2023-12-21 00:00:00 112 Top reviewers: [18]: horms@kernel.org [15]: leonro@nvidia.com [8]: rmk+kernel@armlinux.org.uk INACTIVE MAINTAINER John Crispin <john@phrozen.org> Reviewed-by:John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20240109164517.3063131-2-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Breno Leitao says: ==================== Fix MODULE_DESCRIPTION() for net (p1) There are hundreds of network modules that misses MODULE_DESCRIPTION(), causing a warnning when compiling with W=1. Example: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o ==================== Link: https://lore.kernel.org/r/20240108181610.2697017-1-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Neterion 10GbE (s2io) driver. Signed-off-by:
Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240108181610.2697017-10-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to Slic Maxim ds26522 card driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to Sun RPC modules. Signed-off-by:
Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20240108181610.2697017-6-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all NFC Controller Interface (NCI) modules. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240108181610.2697017-5-leitao@debian.orgSigned-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to High-availability Seamless Redundancy (HSR) driver. Signed-off-by:
-
Breno Leitao authored
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Serial Line (SLIP) protocol modules. Signed-off-by:
-
