- 12 Feb, 2021 1 commit
-
-
Tong Zhang authored
FSL_ENETC_MDIO use symbols from PHYLIB (MDIO_BUS) and MDIO_DEVRES, however there are no dependency specified in Kconfig ERROR: modpost: "__mdiobus_register" [drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko] undefined! ERROR: modpost: "mdiobus_unregister" [drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko] undefined! ERROR: modpost: "devm_mdiobus_alloc_size" [drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko] undefined! add depends on MDIO_DEVRES && MDIO_BUS Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 11 Feb, 2021 7 commits
-
-
Nathan Rossi authored
The aq_nic_start function can fail in a variety of cases which leaves the device in broken state. An example case where the start function fails is the request_threaded_irq which can be interrupted, resulting in a EINTR result. This can be manually triggered by bringing the link up (e.g. ip link set up) and triggering a SIGINT on the initiating process (e.g. Ctrl+C). This would put the device into a half configured state. Subsequently bringing the link up again would cause the napi_enable to BUG. In order to correctly clean up the failed attempt to start a device call aq_nic_stop. Signed-off-by:
Nathan Rossi <nathan.rossi@digi.com> Reviewed-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: 2 bug fixes. Two unrelated fixes. The first one fixes intermittent false TX timeouts during ring reconfigurations. The second one fixes a formatting discrepancy between the stored and the running FW versions. Please also queue these for -stable. Thanks. ==================== Signed-off-by: -
Vasundhara Volam authored
The running fw.psid version is in decimal format but the stored fw.psid is in hex format. This can mislead the user to reset the NIC to activate the stored version to become the running version. Fix it to display the stored fw.psid in decimal format. Fixes: 1388875b ("bnxt_en: Add stored FW version info to devlink info_get cb.") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Edwin Peer authored
A TX queue can potentially immediately timeout after it is stopped and the last TX timestamp on that queue was more than 5 seconds ago with carrier still up. Prevent these intermittent false TX timeouts by bringing down carrier first before calling netif_tx_disable(). Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
If set_link_state() fails for any reason, we still cleanup the adapter state and cannot recover from a partial close anyway. So set the adapter to CLOSED state. That way if a new soft/hard reset is processed, the adapter will remain in the CLOSED state until the next ibmvnic_open(). Fixes: 01d9bd79 ("ibmvnic: Reorganize device close") Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reported-by:
Abdul Haleem <abdhalee@in.ibm.com> Signed-off-by:
-
Eric Dumazet authored
tcp_rmem[1] has been changed to 131072, we should update the documentation to reflect this. Fixes: a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Zhibin Liu <zhibinliu@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Jakub Kicinski authored
Point out where patchwork bot's code lives, and that we don't want people posting stuff that doesn't build. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
- 10 Feb, 2021 25 commits
-
-
wenxu authored
Reject the unsupported and invalid ct_state flags of cls flower rules. Fixes: e0ace68a ("net/sched: cls_flower: Add matching on conntrack info") Signed-off-by:
wenxu <wenxu@ucloud.cn> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "Address a performance regression related to scale-invariance on x86 that may prevent turbo CPU frequencies from being used in certain workloads on systems using acpi-cpufreq as the CPU performance scaling driver and schedutil as the scaling governor" * tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there cpufreq: ACPI: Extend frequency tables to cover boost frequencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Revert a problematic ACPICA commit that changed the code to attempt to update memory regions which may be read-only on some systems (Ard Biesheuvel)" * tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "Some late fixes for dmaengine: Core: - fix channel device_node deletion Driver fixes: - dw: revert of runtime pm enabling - idxd: device state fix, interrupt completion and list corruption - ti: resource leak * tag 'dmaengine-fix2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine dw: Revert "dmaengine: dw: Enable runtime PM" dmaengine: idxd: check device state before issue command dmaengine: ti: k3-udma: Fix a resource leak in an error handling path dmaengine: move channel device_node deletion to driver dmaengine: idxd: fix misc interrupt completion dmaengine: idxd: Fix list corruption in description completion
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Another pile of networing fixes: 1) ath9k build error fix from Arnd Bergmann 2) dma memory leak fix in mediatec driver from Lorenzo Bianconi. 3) bpf int3 kprobe fix from Alexei Starovoitov. 4) bpf stackmap integer overflow fix from Bui Quang Minh. 5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from Christoph Schemmel. 6) Don't update deleted entry in xt_recent netfilter module, from Jazsef Kadlecsik. 7) Use after free in nftables, fix from Pablo Neira Ayuso. 8) Header checksum fix in flowtable from Sven Auhagen. 9) Validate user controlled length in qrtr code, from Sabyrzhan Tasbolatov. 10) Fix race in xen/netback, from Juergen Gross, 11) New device ID in cxgb4, from Raju Rangoju. 12) Fix ring locking in rxrpc release call, from David Howells. 13) Don't return LAPB error codes from x25_open(), from Xie He. 14) Missing error returns in gsi_channel_setup() from Alex Elder. 15) Get skb_copy_and_csum_datagram working properly with odd segment sizes, from Willem de Bruijn. 16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean. 17) Do teardown on probe failure in DSA, from Vladimir Oltean. 18) Fix compilation failures of txtimestamp selftest, from Vadim Fedorenko. 19) Limit rx per-napi gro queue size to fix latency regression, from Eric Dumazet. 20) dpaa_eth xdp fixes from Camelia Groza. 21) Missing txq mode update when switching CBS off, in stmmac driver, from Mohammad Athari Bin Ismail. 22) Failover pending logic fix in ibmvnic driver, from Sukadev Bhattiprolu. 23) Null deref fix in vmw_vsock, from Norbert Slusarek. 24) Missing verdict update in xdp paths of ena driver, from Shay Agroskin. 25) seq_file iteration fix in sctp from Neil Brown. 26) bpf 32-bit src register truncation fix on div/mod, from Daniel Borkmann. 27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann. 28) Fix locking in vsock_shutdown(), from Stefano Garzarella. 29) Various missing index bound checks in hns3 driver, from Yufeng Mo. 30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from Vladimir Oltean. 31) Don't mix up stp and mrp port states in bridge layer, from Horatiu Vultur. 32) Fix locking during netif_tx_disable(), from Edwin Peer" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) bpf: Fix 32 bit src register truncation on div/mod bpf: Fix verifier jmp32 pruning decision logic bpf: Fix verifier jsgt branch analysis on max bound vsock: fix locking in vsock_shutdown() net: hns3: add a check for index in hclge_get_rss_key() net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx() net: hns3: add a check for queue_id in hclge_reset_vf_queue() net: dsa: felix: implement port flushing on .phylink_mac_link_down switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state net: watchdog: hold device global xmit lock during tx disable netfilter: nftables: relax check for stateful expressions in set definition netfilter: conntrack: skip identical origin tuple in same zone only vsock/virtio: update credit only if socket is not closed net: fix iteration for sctp transport seq_files net: ena: Update XDP verdict upon failure net/vmw_vsock: improve locking in vsock_connect_timeout() net/vmw_vsock: fix NULL pointer dereference ibmvnic: Clear failover_pending if unable to schedule net: stmmac: set TxQ mode back to DCB after disabling CBS ... -
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "14 patches. Subsystems affected by this patch series: mm (kasan, mremap, tmpfs, selftests, memcg, and slub), MAINTAINERS, squashfs, nilfs2, and firmware" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: nilfs2: make splice write available again mm, slub: better heuristic for number of cpus when calculating slab order Revert "mm: memcontrol: avoid workload stalls when lowering memory.high" MAINTAINERS: update Andrey Ryabinin's email address selftests/vm: rename file run_vmtests to run_vmtests.sh tmpfs: disallow CONFIG_TMPFS_INODE64 on alpha tmpfs: disallow CONFIG_TMPFS_INODE64 on s390 mm/mremap: fix BUILD_BUG_ON() error in get_extent firmware_loader: align .builtin_fw to 8 kasan: fix stack traces dependency for HW_TAGS squashfs: add more sanity checks in xattr id lookup squashfs: add more sanity checks in inode lookup squashfs: add more sanity checks in id lookup squashfs: avoid out of bounds writes in decompressors
-
Joachim Henke authored
Since 5.10, splice() or sendfile() to NILFS2 return EINVAL. This was caused by commit 36e2c742 ("fs: don't allow splice read/write without explicit ops"). This patch initializes the splice_write field in file_operations, like most file systems do, to restore the functionality. Link: https://lkml.kernel.org/r/1612784101-14353-1-git-send-email-konishi.ryusuke@gmail.comSigned-off-by:
Joachim Henke <joachim.henke@t-systems.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vlastimil Babka authored
When creating a new kmem cache, SLUB determines how large the slab pages will based on number of inputs, including the number of CPUs in the system. Larger slab pages mean that more objects can be allocated/free from per-cpu slabs before accessing shared structures, but also potentially more memory can be wasted due to low slab usage and fragmentation. The rough idea of using number of CPUs is that larger systems will be more likely to benefit from reduced contention, and also should have enough memory to spare. Number of CPUs used to be determined as nr_cpu_ids, which is number of possible cpus, but on some systems many will never be onlined, thus commit 045ab8c9 ("mm/slub: let number of online CPUs determine the slub page order") changed it to nr_online_cpus(). However, for kmem caches created early before CPUs are onlined, this may lead to permamently low slab page sizes. Vincent reports a regression [1] of hackbench on arm64 systems: "I'm facing significant performances regression on a large arm64 server system (224 CPUs). Regressions is also present on small arm64 system (8 CPUs) but in a far smaller order of magnitude On 224 CPUs system : 9 iterations of hackbench -l 16000 -g 16 v5.11-rc4 : 9.135sec (+/- 0.45%) v5.11-rc4 + revert this patch: 3.173sec (+/- 0.48%) v5.10: 3.136sec (+/- 0.40%)" Mel reports a regression [2] of hackbench on x86_64, with lockstat suggesting page allocator contention: "i.e. the patch incurs a 7% to 32% performance penalty. This bisected cleanly yesterday when I was looking for the regression and then found the thread. Numerous caches change size. For example, kmalloc-512 goes from order-0 (vanilla) to order-2 with the revert. So mostly this is down to the number of times SLUB calls into the page allocator which only caches order-0 pages on a per-cpu basis" Clearly num_online_cpus() doesn't work too early in bootup. We could change the order dynamically in a memory hotplug callback, but runtime order changing for existing kmem caches has been already shown as dangerous, and removed in 32a6f409 ("mm, slub: remove runtime allocation order changes"). It could be resurrected in a safe manner with some effort, but to fix the regression we need something simpler. We could use num_present_cpus() that should be the number of physically present CPUs even before they are onlined. That would work for PowerPC [3], which triggered the original commit, but that still doesn't work on arm64 [4] as explained in [5]. So this patch tries to determine the best available value without specific arch knowledge. - num_present_cpus() if the number is larger than 1, as that means the arch is likely setting it properly - nr_cpu_ids otherwise This should fix the reported regressions while also keeping the effect of 045ab8c9 for PowerPC systems. It's possible there are configurations where num_present_cpus() is 1 during boot while nr_cpu_ids is at the same time bloated, so these (if they exist) would keep the large orders based on nr_cpu_ids as was before 045ab8c9. [1] https://lore.kernel.org/linux-mm/CAKfTPtA_JgMf_+zdFbcb_V9rM7JBWNPjAz9irgwFj7Rou=xzZg@mail.gmail.com/ [2] https://lore.kernel.org/linux-mm/20210128134512.GF3592@techsingularity.net/ [3] https://lore.kernel.org/linux-mm/20210123051607.GC2587010@in.ibm.com/ [4] https://lore.kernel.org/linux-mm/CAKfTPtAjyVmS5VYvU6DBxg4-JEo5bdmWbngf-03YsY18cmWv_g@mail.gmail.com/ [5] https://lore.kernel.org/linux-mm/20210126230305.GD30941@willie-the-truck/ Link: https://lkml.kernel.org/r/20210208134108.22286-1-vbabka@suse.cz Fixes: 045ab8c9 ("mm/slub: let number of online CPUs determine the slub page order") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Vincent Guittot <vincent.guittot@linaro.org> Reported-by:
Mel Gorman <mgorman@techsingularity.net> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-02-10 The following pull-request contains BPF updates for your *net* tree. We've added 5 non-merge commits during the last 8 day(s) which contain a total of 3 files changed, 22 insertions(+), 21 deletions(-). The main changes are: 1) Fix missed execution of kprobes BPF progs when kprobe is firing via int3, from Alexei Starovoitov. 2) Fix potential integer overflow in map max_entries for stackmap on 32 bit archs, from Bui Quang Minh. 3) Fix a verifier pruning and a insn rewrite issue related to 32 bit ops, from Daniel Borkmann. ==================== Signed-off-by: -
Johannes Weiner authored
This reverts commit 536d3bf2, as it can cause writers to memory.high to get stuck in the kernel forever, performing page reclaim and consuming excessive amounts of CPU cycles. Before the patch, a write to memory.high would first put the new limit in place for the workload, and then reclaim the requested delta. After the patch, the kernel tries to reclaim the delta before putting the new limit into place, in order to not overwhelm the workload with a sudden, large excess over the limit. However, if reclaim is actively racing with new allocations from the uncurbed workload, it can keep the write() working inside the kernel indefinitely. This is causing problems in Facebook production. A privileged system-level daemon that adjusts memory.high for various workloads running on a host can get unexpectedly stuck in the kernel and essentially turn into a sort of involuntary kswapd for one of the workloads. We've observed that daemon busy-spin in a write() for minutes at a time, neglecting its other duties on the system, and expending privileged system resources on behalf of a workload. To remedy this, we have first considered changing the reclaim logic to break out after a couple of loops - whether the workload has converged to the new limit or not - and bound the write() call this way. However, the root cause that inspired the sequence change in the first place has been fixed through other means, and so a revert back to the proven limit-setting sequence, also used by memory.max, is preferable. The sequence was changed to avoid extreme latencies in the workload when the limit was lowered: the sudden, large excess created by the limit lowering would erroneously trigger the penalty sleeping code that is meant to throttle excessive growth from below. Allocating threads could end up sleeping long after the write() had already reclaimed the delta for which they were being punished. However, erroneous throttling also caused problems in other scenarios at around the same time. This resulted in commit b3ff9291 ("mm, memcg: reclaim more aggressively before high allocator throttling"), included in the same release as the offending commit. When allocating threads now encounter large excess caused by a racing write() to memory.high, instead of entering punitive sleeps, they will simply be tasked with helping reclaim down the excess, and will be held no longer than it takes to accomplish that. This is in line with regular limit enforcement - i.e. if the workload allocates up against or over an otherwise unchanged limit from below. With the patch breaking userspace, and the root cause addressed by other means already, revert it again. Link: https://lkml.kernel.org/r/20210122184341.292461-1-hannes@cmpxchg.org Fixes: 536d3bf2 ("mm: memcontrol: avoid workload stalls when lowering memory.high") Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-by:
Tejun Heo <tj@kernel.org> Acked-by:
Chris Down <chris@chrisdown.name> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: <stable@vger.kernel.org> [5.8+] Signed-off-by:
-
Andrey Ryabinin authored
Update my email, @virtuozzo.com will stop working shortly. Link: https://lkml.kernel.org/r/20210204223904.3824-1-ryabinin.a.a@gmail.comSigned-off-by:
Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by:
-
Rong Chen authored
Commit c2aa8afc has renamed run_vmtests in Makefile, but the file still uses the old name. The kernel test robot reported the following issue: # selftests: vm: run_vmtests.sh # Warning: file run_vmtests.sh is missing! not ok 1 selftests: vm: run_vmtests.sh Link: https://lkml.kernel.org/r/20210205085507.1479894-1-rong.a.chen@intel.com Fixes: c2aa8afc (selftests/vm: rename run_vmtests --> run_vmtests.sh) Signed-off-by:
Rong Chen <rong.a.chen@intel.com> Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
Seth Forshee authored
As with s390, alpha is a 64-bit architecture with a 32-bit ino_t. With CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers and display "inode64" in the mount options, whereas passing "inode64" in the mount options will fail. This leads to erroneous behaviours such as this: # mkdir mnt # mount -t tmpfs nodev mnt # mount -o remount,rw mnt mount: /home/ubuntu/mnt: mount point not mounted or bad option. Prevent CONFIG_TMPFS_INODE64 from being selected on alpha. Link: https://lkml.kernel.org/r/20210208215726.608197-1-seth.forshee@canonical.com Fixes: ea3271f7 ("tmpfs: support 64-bit inums per-sb") Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: Chris Down <chris@chrisdown.name> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by:
-
Seth Forshee authored
Currently there is an assumption in tmpfs that 64-bit architectures also have a 64-bit ino_t. This is not true on s390 which has a 32-bit ino_t. With CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers and display "inode64" in the mount options, but passing the "inode64" mount option will fail. This leads to the following behavior: # mkdir mnt # mount -t tmpfs nodev mnt # mount -o remount,rw mnt mount: /home/ubuntu/mnt: mount point not mounted or bad option. As mount sees "inode64" in the mount options and thus passes it in the options for the remount. So prevent CONFIG_TMPFS_INODE64 from being selected on s390. Link: https://lkml.kernel.org/r/20210205230620.518245-1-seth.forshee@canonical.com Fixes: ea3271f7 ("tmpfs: support 64-bit inums per-sb") Signed-off-by:
-
Arnd Bergmann authored
clang can't evaluate this function argument at compile time when the function is not inlined, which leads to a link time failure: ld.lld: error: undefined symbol: __compiletime_assert_414 >>> referenced by mremap.c >>> mremap.o:(get_extent) in archive mm/built-in.a Mark the function as __always_inline to avoid it. Link: https://lkml.kernel.org/r/20201230154104.522605-1-arnd@kernel.org Fixes: 9ad9718b ("mm/mremap: calculate extent in one place") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Cc: Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Signed-off-by:
-
Fangrui Song authored
arm64 references the start address of .builtin_fw (__start_builtin_fw) with a pair of R_AARCH64_ADR_PREL_PG_HI21/R_AARCH64_LDST64_ABS_LO12_NC relocations. The compiler is allowed to emit the R_AARCH64_LDST64_ABS_LO12_NC relocation because struct builtin_fw in include/linux/firmware.h is 8-byte aligned. The R_AARCH64_LDST64_ABS_LO12_NC relocation requires the address to be a multiple of 8, which may not be the case if .builtin_fw is empty. Unconditionally align .builtin_fw to fix the linker error. 32-bit architectures could use ALIGN(4) but that would add unnecessary complexity, so just use ALIGN(8). Link: https://lkml.kernel.org/r/20201208054646.2913063-1-maskray@google.com Link: https://github.com/ClangBuiltLinux/linux/issues/1204 Fixes: 5658c769 ("firmware: allow firmware files to be built into kernel image") Signed-off-by:
Fangrui Song <maskray@google.com> Reported-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Andrey Konovalov authored
Currently, whether the alloc/free stack traces collection is enabled by default for hardware tag-based KASAN depends on CONFIG_DEBUG_KERNEL. The intention for this dependency was to only enable collection on slow debug kernels due to a significant perf and memory impact. As it turns out, CONFIG_DEBUG_KERNEL is not considered a debug option and is enabled on many productions kernels including Android and Ubuntu. As the result, this dependency is pointless and only complicates the code and documentation. Having stack traces collection disabled by default would make the hardware mode work differently to to the software ones, which is confusing. This change removes the dependency and enables stack traces collection by default. Looking into the future, this default might makes sense for production kernels, assuming we implement a fast stack trace collection approach. Link: https://lkml.kernel.org/r/6678d77ceffb71f1cff2cf61560e2ffe7bb6bfe9.1612808820.git.andreyknvl@google.comSigned-off-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Marco Elver <elver@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by:
-
Phillip Lougher authored
Sysbot has reported a warning where a kmalloc() attempt exceeds the maximum limit. This has been identified as corruption of the xattr_ids count when reading the xattr id lookup table. This patch adds a number of additional sanity checks to detect this corruption and others. 1. It checks for a corrupted xattr index read from the inode. This could be because the metadata block is uncompressed, or because the "compression" bit has been corrupted (turning a compressed block into an uncompressed block). This would cause an out of bounds read. 2. It checks against corruption of the xattr_ids count. This can either lead to the above kmalloc failure, or a smaller than expected table to be read. 3. It checks the contents of the index table for corruption. [phillip@squashfs.org.uk: fix checkpatch issue] Link: https://lkml.kernel.org/r/270245655.754655.1612770082682@webmail.123-reg.co.uk Link: https://lkml.kernel.org/r/20210204130249.4495-5-phillip@squashfs.org.ukSigned-off-by:
Phillip Lougher <phillip@squashfs.org.uk> Reported-by: syzbot+2ccea6339d368360800d@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Phillip Lougher authored
Sysbot has reported an "slab-out-of-bounds read" error which has been identified as being caused by a corrupted "ino_num" value read from the inode. This could be because the metadata block is uncompressed, or because the "compression" bit has been corrupted (turning a compressed block into an uncompressed block). This patch adds additional sanity checks to detect this, and the following corruption. 1. It checks against corruption of the inodes count. This can either lead to a larger table to be read, or a smaller than expected table to be read. In the case of a too large inodes count, this would often have been trapped by the existing sanity checks, but this patch introduces a more exact check, which can identify too small values. 2. It checks the contents of the index table for corruption. [phillip@squashfs.org.uk: fix checkpatch issue] Link: https://lkml.kernel.org/r/527909353.754618.1612769948607@webmail.123-reg.co.uk Link: https://lkml.kernel.org/r/20210204130249.4495-4-phillip@squashfs.org.ukSigned-off-by:
-
Phillip Lougher authored
Sysbot has reported a number of "slab-out-of-bounds reads" and "use-after-free read" errors which has been identified as being caused by a corrupted index value read from the inode. This could be because the metadata block is uncompressed, or because the "compression" bit has been corrupted (turning a compressed block into an uncompressed block). This patch adds additional sanity checks to detect this, and the following corruption. 1. It checks against corruption of the ids count. This can either lead to a larger table to be read, or a smaller than expected table to be read. In the case of a too large ids count, this would often have been trapped by the existing sanity checks, but this patch introduces a more exact check, which can identify too small values. 2. It checks the contents of the index table for corruption. Link: https://lkml.kernel.org/r/20210204130249.4495-3-phillip@squashfs.org.ukSigned-off-by:
-
Phillip Lougher authored
Patch series "Squashfs: fix BIO migration regression and add sanity checks". Patch [1/4] fixes a regression introduced by the "migrate from ll_rw_block usage to BIO" patch, which has produced a number of Sysbot/Syzkaller reports. Patches [2/4], [3/4], and [4/4] fix a number of filesystem corruption issues which have produced Sysbot reports in the id, inode and xattr lookup code. Each patch has been tested against the Sysbot reproducers using the given kernel configuration. They have the appropriate "Reported-by:" lines added. Additionally, all of the reproducer filesystems are indirectly fixed by patch [4/4] due to the fact they all have xattr corruption which is now detected there. Additional testing with other configurations and architectures (32bit, big endian), and normal filesystems has also been done to trap any inadvertent regressions caused by the additional sanity checks. This patch (of 4): This is a regression introduced by the patch "migrate from ll_rw_block usage to BIO". Sysbot/Syskaller has reported a number of "out of bounds writes" and "unable to handle kernel paging request in squashfs_decompress" errors which have been identified as a regression introduced by the above patch. Specifically, the patch removed the following sanity check if (length < 0 || length > output->length || (index + length) > msblk->bytes_used) This check did two things: 1. It ensured any reads were not beyond the end of the filesystem 2. It ensured that the "length" field read from the filesystem was within the expected maximum length. Without this any corrupted values can over-run allocated buffers. Link: https://lkml.kernel.org/r/20210204130249.4495-1-phillip@squashfs.org.uk Link: https://lkml.kernel.org/r/20210204130249.4495-2-phillip@squashfs.org.uk Fixes: 93e72b3c ("squashfs: migrate from ll_rw_block usage to BIO") Reported-by: syzbot+6fba78f99b9afd4b5634@syzkaller.appspotmail.com Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxLinus Torvalds authored
Pull i3c fix from Alexandre Belloni: "A single build warning fix" * tag 'i3c/fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c/master/mipi-i3c-hci: Fix position of __maybe_unused in i3c_hci_of_match
-
Daniel Borkmann authored
While reviewing a different fix, John and I noticed an oddity in one of the BPF program dumps that stood out, for example: # bpftool p d x i 13 0: (b7) r0 = 808464450 1: (b4) w4 = 808464432 2: (bc) w0 = w0 3: (15) if r0 == 0x0 goto pc+1 4: (9c) w4 %= w0 [...] In line 2 we noticed that the mov32 would 32 bit truncate the original src register for the div/mod operation. While for the two operations the dst register is typically marked unknown e.g. from adjust_scalar_min_max_vals() the src register is not, and thus verifier keeps tracking original bounds, simplified: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r0 = -1 1: R0_w=invP-1 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (b7) r1 = -1 2: R0_w=invP-1 R1_w=invP-1 R10=fp0 2: (3c) w0 /= w1 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP-1 R10=fp0 3: (77) r1 >>= 32 4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP4294967295 R10=fp0 4: (bf) r0 = r1 5: R0_w=invP4294967295 R1_w=invP4294967295 R10=fp0 5: (95) exit processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 Runtime result of r0 at exit is 0 instead of expected -1. Remove the verifier mov32 src rewrite in div/mod and replace it with a jmp32 test instead. After the fix, we result in the following code generation when having dividend r1 and divisor r6: div, 64 bit: div, 32 bit: 0: (b7) r6 = 8 0: (b7) r6 = 8 1: (b7) r1 = 8 1: (b7) r1 = 8 2: (55) if r6 != 0x0 goto pc+2 2: (56) if w6 != 0x0 goto pc+2 3: (ac) w1 ^= w1 3: (ac) w1 ^= w1 4: (05) goto pc+1 4: (05) goto pc+1 5: (3f) r1 /= r6 5: (3c) w1 /= w6 6: (b7) r0 = 0 6: (b7) r0 = 0 7: (95) exit 7: (95) exit mod, 64 bit: mod, 32 bit: 0: (b7) r6 = 8 0: (b7) r6 = 8 1: (b7) r1 = 8 1: (b7) r1 = 8 2: (15) if r6 == 0x0 goto pc+1 2: (16) if w6 == 0x0 goto pc+1 3: (9f) r1 %= r6 3: (9c) w1 %= w6 4: (b7) r0 = 0 4: (b7) r0 = 0 5: (95) exit 5: (95) exit x86 in particular can throw a 'divide error' exception for div instruction not only for divisor being zero, but also for the case when the quotient is too large for the designated register. For the edx:eax and rdx:rax dividend pair it is not an issue in x86 BPF JIT since we always zero edx (rdx). Hence really the only protection needed is against divisor being zero. Fixes: 68fda450 ("bpf: fix 32-bit divide by zero") Co-developed-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes: func#0 @0 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r0 = 808464450 1: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (b4) w4 = 808464432 2: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP808464432 R10=fp0 2: (9c) w4 %= w0 3: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 3: (66) if w4 s> 0x30303030 goto pc+0 R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0 4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0 4: (7f) r0 >>= r0 5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0 5: (9c) w4 %= w0 6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 6: (66) if w0 s> 0x3030 goto pc+0 R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 7: (d6) if w0 s<= 0x303030 goto pc+1 9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 9: (95) exit propagating r0 from 6 to 7: safe 4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0 4: (7f) r0 >>= r0 5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0 5: (9c) w4 %= w0 6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 6: (66) if w0 s> 0x3030 goto pc+0 R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 propagating r0 7: safe propagating r0 from 6 to 7: safe processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 The underlying program was xlated as follows: # bpftool p d x i 10 0: (b7) r0 = 808464450 1: (b4) w4 = 808464432 2: (bc) w0 = w0 3: (15) if r0 == 0x0 goto pc+1 4: (9c) w4 %= w0 5: (66) if w4 s> 0x30303030 goto pc+0 6: (7f) r0 >>= r0 7: (bc) w0 = w0 8: (15) if r0 == 0x0 goto pc+1 9: (9c) w4 %= w0 10: (66) if w0 s> 0x3030 goto pc+0 11: (d6) if w0 s<= 0x303030 goto pc+1 12: (05) goto pc-1 13: (95) exit The verifier rewrote original instructions it recognized as dead code with 'goto pc-1', but reality differs from verifier simulation in that we are actually able to trigger a hang due to hitting the 'goto pc-1' instructions. Taking a closer look at the verifier analysis, the reason is that it misjudges its pruning decision at the first 'from 6 to 7: safe' occasion. What happens is that while both old/cur registers are marked as precise, they get misjudged for the jmp32 case as range_within() yields true, meaning that the prior verification path with a wider register bound could be verified successfully and therefore the current path with a narrower register bound is deemed safe as well whereas in reality it's not. R0 old/cur path's bounds compare as follows: old: smin_value=0x8000000000000000,smax_value=0x7fffffffffffffff,umin_value=0x0,umax_value=0xffffffffffffffff,var_off=(0x0; 0xffffffffffffffff) cur: smin_value=0x8000000000000000,smax_value=0x7fffffff7fffffff,umin_value=0x0,umax_value=0xffffffff7fffffff,var_off=(0x0; 0xffffffff7fffffff) old: s32_min_value=0x80000000,s32_max_value=0x00003030,u32_min_value=0x00000000,u32_max_value=0xffffffff cur: s32_min_value=0x00003031,s32_max_value=0x7fffffff,u32_min_value=0x00003031,u32_max_value=0x7fffffff The 64 bit bounds generally look okay and while the information that got propagated from 32 to 64 bit looks correct as well, it's not precise enough for judging a conditional jmp32. Given the latter only operates on subregisters we also need to take these into account as well for a range_within() probe in order to be able to prune paths. Extending the range_within() constraint to both bounds will be able to tell us that the old signed 32 bit bounds are not wider than the cur signed 32 bit bounds. With the fix in place, the program will now verify the 'goto' branch case as it should have been: [...] 6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 6: (66) if w0 s> 0x3030 goto pc+0 R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 7: (d6) if w0 s<= 0x303030 goto pc+1 9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 9: (95) exit 7: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=12337,u32_min_value=12337,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 7: (d6) if w0 s<= 0x303030 goto pc+1 R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 8: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 8: (30) r0 = *(u8 *)skb[808464432] BPF_LD_[ABS|IND] uses reserved fields processed 11 insns (limit 1000000) max_states_per_insn 1 total_states 1 peak_states 1 mark_read 1 The bug is quite subtle in the sense that when verifier would determine that a given branch is dead code, it would (here: wrongly) remove these instructions from the program and hard-wire the taken branch for privileged programs instead of the 'goto pc-1' rewrites which will cause hard to debug problems. Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Fix incorrect is_branch{32,64}_taken() analysis for the jsgt case. The return code for both will tell the caller whether a given conditional jump is taken or not, e.g. 1 means branch will be taken [for the involved registers] and the goto target will be executed, 0 means branch will not be taken and instead we fall-through to the next insn, and last but not least a -1 denotes that it is not known at verification time whether a branch will be taken or not. Now while the jsgt has the branch-taken case correct with reg->s32_min_value > sval, the branch-not-taken case is off-by-one when testing for reg->s32_max_value < sval since the branch will also be taken for reg->s32_max_value == sval. The jgt branch analysis, for example, gets this right. Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking") Fixes: 4f7b3e82 ("bpf: improve verifier branch analysis") Signed-off-by:
-
- 09 Feb, 2021 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) nf_conntrack_tuple_taken() needs to recheck zone for NAT clash resolution, from Florian Westphal. 2) Restore support for stateful expressions when set definition specifies no stateful expressions. ==================== Signed-off-by: -
Stefano Garzarella authored
In vsock_shutdown() we touched some socket fields without holding the socket lock, such as 'state' and 'sk_flags'. Also, after the introduction of multi-transport, we are accessing 'vsk->transport' in vsock_send_shutdown() without holding the lock and this call can be made while the connection is in progress, so the transport can change in the meantime. To avoid issues, we hold the socket lock when we enter in vsock_shutdown() and release it when we leave. Among the transports that implement the 'shutdown' callback, only hyperv_transport acquired the lock. Since the caller now holds it, we no longer take it. Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: fixes for -net The parameters sent from vf may be unreliable. If these parameters are used directly, memory overwriting may occur. So this series adds some checks for this case. ==================== Signed-off-by: -
Yufeng Mo authored
The index is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this index before using it in hclge_get_rss_key(). Fixes: a638b1d8 ("net: hns3: fix get VF RSS issue") Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yufeng Mo authored
The tqp_index is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this tqp_index before using it in hclge_get_ring_chain_from_mbx(). Fixes: 84e095d6 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox") Signed-off-by:
-
Yufeng Mo authored
The queue_id is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this queue_id before using it in hclge_reset_vf_queue(). Fixes: 1a426f8b ("net: hns3: fix the VF queue reset flow error") Signed-off-by:
-
Vladimir Oltean authored
There are several issues which may be seen when the link goes down while forwarding traffic, all of which can be attributed to the fact that the port flushing procedure from the reference manual was not closely followed. With flow control enabled on both the ingress port and the egress port, it may happen when a link goes down that Ethernet packets are in flight. In flow control mode, frames are held back and not dropped. When there is enough traffic in flight (example: iperf3 TCP), then the ingress port might enter congestion and never exit that state. This is a problem, because it is the egress port's link that went down, and that has caused the inability of the ingress port to send packets to any other port. This is solved by flushing the egress port's queues when it goes down. There is also a problem when performing stream splitting for IEEE 802.1CB traffic (not yet upstream, but a sort of multicast, basically). There, if one port from the destination ports mask goes down, splitting the stream towards the other destinations will no longer be performed. This can be traced down to this line: ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG); which should have been instead, as per the reference manual: ocelot_port_rmwl(ocelot_port, 0, DEV_MAC_ENA_CFG_RX_ENA, DEV_MAC_ENA_CFG); Basically only DEV_MAC_ENA_CFG_RX_ENA should be disabled, but not DEV_MAC_ENA_CFG_TX_ENA - I don't have further insight into why that is the case, but apparently multicasting to several ports will cause issues if at least one of them doesn't have DEV_MAC_ENA_CFG_TX_ENA set. I am not sure what the state of the Ocelot VSC7514 driver is, but probably not as bad as Felix/Seville, since VSC7514 uses phylib and has the following in ocelot_adjust_link: if (!phydev->link) return; therefore the port is not really put down when the link is lost, unlike the DSA drivers which use .phylink_mac_link_down for that. Nonetheless, I put ocelot_port_flush() in the common ocelot.c because it needs to access some registers from drivers/net/ethernet/mscc/ocelot_rew.h which are not exported in include/soc/mscc/ and a bugfix patch should probably not move headers around. Fixes: bdeced75 ("net: dsa: felix: Add PCS operations for PHYLINK") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
