- 11 Jun, 2019 19 commits
-
-
Rasmus Villemoes authored
commit ef4d6f6b upstream. The ror32 implementation (word >> shift) | (word << (32 - shift) has undefined behaviour if shift is outside the [1, 31] range. Similarly for the 64 bit variants. Most callers pass a compile-time constant (naturally in that range), but there's an UBSAN report that these may actually be called with a shift count of 0. Instead of special-casing that, we can make them DTRT for all values of shift while also avoiding UB. For some reason, this was already partly done for rol32 (which was well-defined for [0, 31]). gcc 8 recognizes these patterns as rotates, so for example __u32 rol32(__u32 word, unsigned int shift) { return (word << (shift & 31)) | (word >> ((-shift) & 31)); } compiles to 0000000000000020 <rol32>: 20: 89 f8 mov %edi,%eax 22: 89 f1 mov %esi,%ecx 24: d3 c0 rol %cl,%eax 26: c3 retq Older compilers unfortunately do not do as well, but this only affects the small minority of users that don't pass constants. Due to integer promotions, ro[lr]8 were already well-defined for shifts in [0, 8], and ro[lr]16 were mostly well-defined for shifts in [0, 16] (only mostly - u16 gets promoted to _signed_ int, so if bit 15 is set, word << 16 is undefined). For consistency, update those as well. Link: http://lkml.kernel.org/r/20190410211906.2190-1-linux@rasmusvillemoes.dkSigned-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reported-by:
Ido Schimmel <idosch@mellanox.com> Tested-by:
Will Deacon <will.deacon@arm.com> Cc: Vadim Pasternak <vadimp@mellanox.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Clarke authored
commit d3c976c1 upstream. Previously, %g2 would end up with the value PAGE_SIZE, but after the commit mentioned below it ends up with the value 1 due to being reused for a different purpose. We need it to be PAGE_SIZE as we use it to step through pages in our demap loop, otherwise we set different flags in the low 12 bits of the address written to, thereby doing things other than a nucleus page flush. Fixes: a74ad5e6 ("sparc64: Handle extremely large kernel TLB range flushes more gracefully.") Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
James Clarke <jrtc27@jrtc27.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Junwei Hu authored
commit 526f5b85 upstream. Error message printed: modprobe: ERROR: could not insert 'tipc': Address family not supported by protocol. when modprobe tipc after the following patch: switch order of device registration, commit 7e27e8d6 ("tipc: switch order of device registration to fix a crash") Because sock_create_kern(net, AF_TIPC, ...) called by tipc_topsrv_create_listener() in the initialization process of tipc_init_net(), so tipc_socket_init() must be execute before that. Meanwhile, tipc_net_id need to be initialized when sock_create() called, and tipc_socket_init() is no need to be called for each namespace. I add a variable tipc_topsrv_net_ops, and split the register_pernet_subsys() of tipc into two parts, and split tipc_socket_init() with initialization of pernet params. By the way, I fixed resources rollback error when tipc_bcast_init() failed in tipc_init_net(). Fixes: 7e27e8d6 ("tipc: switch order of device registration to fix a crash") Signed-off-by:
Junwei Hu <hujunwei4@huawei.com> Reported-by:
Wang Wang <wangwang2@huawei.com> Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com Reviewed-by:
Kang Zhou <zhoukang7@huawei.com> Reviewed-by:
Suanming Mou <mousuanming@huawei.com> Signed-off-by:
-
David S. Miller authored
commit 5593530e upstream. This reverts commit 532b0f7e. More revisions coming up. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 7681f31e upstream. There is no need for this at all. Worst it means that if the guest tries to write to BARs it could lead (on certain platforms) to PCI SERR errors. Please note that with af6fc858 "xen-pciback: limit guest control of command register" a guest is still allowed to enable those control bits (safely), but is not allowed to disable them and that therefore a well behaved frontend which enables things before using them will still function correctly. This is done via an write to the configuration register 0x4 which triggers on the backend side: command_write \- pci_enable_device \- pci_enable_device_flags \- do_pci_enable_device \- pcibios_enable_device \-pci_enable_resourcess [which enables the PCI_COMMAND_MEMORY|PCI_COMMAND_IO] However guests (and drivers) which don't do this could cause problems, including the security issues which XSA-120 sought to address. Reported-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Daniel Axtens authored
commit 357d065a upstream. VMX ghash was using a fallback that did not support interleaving simd and nosimd operations, leading to failures in the extended test suite. If I understood correctly, Eric's suggestion was to use the same data format that the generic code uses, allowing us to call into it with the same contexts. I wasn't able to get that to work - I think there's a very different key structure and data layout being used. So instead steal the arm64 approach and perform the fallback operations directly if required. Fixes: cc333cd6 ("crypto: vmx - Adding GHASH routines for VMX module") Cc: stable@vger.kernel.org # v4.1+ Reported-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Daniel Axtens <dja@axtens.net> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit 21808437 ] MVPP2_TXQ_SCHED_TOKEN_CNTR_REG() expects the logical queue id but the current code is passing the global tx queue offset, so it ends up writing to unknown registers (between 0x8280 and 0x82fc, which seemed to be unused by the hardware). This fixes the issue by using the logical queue id instead. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Jisheng Zhang authored
[ Upstream commit d484e06e ] Fix below issues in err code path of probe: 1. we don't need to unregister_netdev() because the netdev isn't registered. 2. when register_netdev() fails, we also need to destroy bm pool for HWBM case. Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
Rasmus Villemoes authored
[ Upstream commit 84b3fd1f ] Currently, the upper half of a 4-byte STATS_TYPE_PORT statistic ends up in bits 47:32 of the return value, instead of bits 31:16 as they should. Fixes: 6e46e2d8 ("net: dsa: mv88e6xxx: Fix u64 statistics") Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 903869bd ] ip_sf_list_clear_all() needs to be defined even if !CONFIG_IP_MULTICAST Fixes: 3580d04a ("ipv4/igmp: fix another memory leak in igmpv3_del_delrec()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3580d04a ] syzbot reported memory leaks [1] that I have back tracked to a missing cleanup from igmpv3_del_delrec() when (im->sfmode != MCAST_INCLUDE) Add ip_sf_list_clear_all() and kfree_pmc() helpers to explicitely handle the cleanups before freeing. [1] BUG: memory leak unreferenced object 0xffff888123e32b00 (size 64): comm "softirq", pid 0, jiffies 4294942968 (age 8.010s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 e0 00 00 01 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000006105011b>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<000000006105011b>] slab_post_alloc_hook mm/slab.h:439 [inline] [<000000006105011b>] slab_alloc mm/slab.c:3326 [inline] [<000000006105011b>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<000000004bba8073>] kmalloc include/linux/slab.h:547 [inline] [<000000004bba8073>] kzalloc include/linux/slab.h:742 [inline] [<000000004bba8073>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline] [<000000004bba8073>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085 [<00000000a46a65a0>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475 [<000000005956ca89>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:957 [<00000000848e2d2f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246 [<00000000b9db185c>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<000000003028e438>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130 [<0000000015b65589>] __sys_setsockopt+0x98/0x120 net/socket.c:2078 [<00000000ac198ef0>] __do_sys_setsockopt net/socket.c:2089 [inline] [<00000000ac198ef0>] __se_sys_setsockopt net/socket.c:2086 [inline] [<00000000ac198ef0>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<000000000a770437>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<00000000d3adb93b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 9c8bb163 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 296d5b54 ] For every RX packet, the driver replenishes all buffers used for that packet and puts them back into the RX ring and RX aggregation ring. In one code path where the RX packet has one RX buffer and one or more aggregation buffers, we missed recycling the aggregation buffer(s) if we are unable to allocate a new SKB buffer. This leads to the aggregation ring slowly running out of buffers over time. Fix it by properly recycling the aggregation buffers. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reported-by:
Rakesh Hemnani <rhemnani@fb.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Chris Packham authored
TLV_SET is called with a data pointer and a len parameter that tells us how many bytes are pointed to by data. When invoking memcpy() we need to careful to only copy len bytes. Previously we would copy TLV_LENGTH(len) bytes which would copy an extra 4 bytes past the end of the data pointer which newer GCC versions complain about. In file included from test.c:17: In function 'TLV_SET', inlined from 'test' at test.c:186:5: /usr/include/linux/tipc_config.h:317:3: warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32] of object 'bearer_name' with type 'char[32]' [-Warray-bounds] memcpy(TLV_DATA(tlv_ptr), data, tlv_len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ test.c: In function 'test': test.c::161:10: note: 'bearer_name' declared here char bearer_name[TIPC_MAX_BEARER_NAME]; ^~~~~~~~~~~ We still want to ensure any padding bytes at the end are initialised, do this with a explicit memset() rather than copy bytes past the end of data. Apply the same logic to TCM_SET. Signed-off-by:Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
-
Kloetzke Jan authored
[ Upstream commit ad70411a ] When disconnecting cdc_ncm the kernel sporadically crashes shortly after the disconnect: [ 57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 58.006653] PC is at 0x0 [ 58.009202] LR is at call_timer_fn+0xec/0x1b4 [ 58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145 [ 58.020976] sp : ffffff8008003da0 [ 58.024295] x29: ffffff8008003da0 x28: 0000000000000001 [ 58.029618] x27: 000000000000000a x26: 0000000000000100 [ 58.034941] x25: 0000000000000000 x24: ffffff8008003e68 [ 58.040263] x23: 0000000000000000 x22: 0000000000000000 [ 58.045587] x21: 0000000000000000 x20: ffffffc68fac1808 [ 58.050910] x19: 0000000000000100 x18: 0000000000000000 [ 58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10 [ 58.061556] x15: 0000000000000001 x14: 000000000000006e [ 58.066878] x13: 0000000000000000 x12: 00000000000000ba [ 58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020 [ 58.077524] x9 : 8000100008001000 x8 : 0000000000000001 [ 58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70 [ 58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b [ 58.093492] x3 : 0000000000000000 x2 : 0000000000000000 [ 58.098814] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 58.205800] [< (null)>] (null) [ 58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c [ 58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128 [ 58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348 [ 58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc [ 58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac [ 58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac ... The crash happens roughly 125..130ms after the disconnect. This correlates with the 'delay' timer that is started on certain USB tx/rx errors in the URB completion handler. The problem is a race of usbnet_stop() with usbnet_start_xmit(). In usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in flight. This only makes sense if no new URBs are submitted concurrently, though. But the usbnet_start_xmit() can run at the same time on another CPU which almost unconditionally submits an URB. The error callback of the new URB will then schedule the timer after it was already stopped. The fix adds a check if the tx queue is stopped after the tx list lock has been taken. This should reliably prevent the submission of new URBs while usbnet_terminate_urbs() does its job. The same thing is done on the rx side even though it might be safe due to other flags that are checked there. Signed-off-by:
Jan Klötzke <Jan.Kloetzke@preh.de> Signed-off-by:
-
Jisheng Zhang authored
[ Upstream commit 49ce881c ] Commit 984203ce ("net: stmmac: mdio: remove reset gpio free") removed the reset gpio free, when the driver is unbinded or rmmod, we miss the gpio free. This patch uses managed API to request the reset gpio, so that the gpio could be freed properly. Fixes: 984203ce ("net: stmmac: mdio: remove reset gpio free") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a4270d67 ] If a network driver provides to napi_gro_frags() an skb with a page fragment of exactly 14 bytes, the call to gro_pull_from_frag0() will 'consume' the fragment by calling skb_frag_unref(skb, 0), and the page might be freed and reused. Reading eth->h_proto at the end of napi_frags_skb() might read mangled data, or crash under specific debugging features. BUG: KASAN: use-after-free in napi_frags_skb net/core/dev.c:5833 [inline] BUG: KASAN: use-after-free in napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841 Read of size 2 at addr ffff88809366840c by task syz-executor599/8957 CPU: 1 PID: 8957 Comm: syz-executor599 Not tainted 5.2.0-rc1+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:142 napi_frags_skb net/core/dev.c:5833 [inline] napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841 tun_get_user+0x2f3c/0x3ff0 drivers/net/tun.c:1991 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037 call_write_iter include/linux/fs.h:1872 [inline] do_iter_readv_writev+0x5f8/0x8f0 fs/read_write.c:693 do_iter_write fs/read_write.c:970 [inline] do_iter_write+0x184/0x610 fs/read_write.c:951 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015 do_writev+0x15b/0x330 fs/read_write.c:1058 Fixes: a50e233c ("net-gro: restore frag0 optimization") Signed-off-by:
-
Andy Duan authored
[ Upstream commit ce8d24f9 ] Fix the clk mismatch in the error path "failed_reset" because below error path will disable clk_ahb and clk_ipg directly, it should use pm_runtime_put_noidle() instead of pm_runtime_put() to avoid to call runtime resume callback. Reported-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Tested-by:
-
Eric Dumazet authored
[ Upstream commit 8fb44d60 ] If llc_mac_hdr_init() returns an error, we must drop the skb since no llc_build_and_send_ui_pkt() caller will take care of this. BUG: memory leak unreferenced object 0xffff8881202b6800 (size 2048): comm "syz-executor907", pid 7074, jiffies 4294943781 (age 8.590s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 1a 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<00000000e25b5abe>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000e25b5abe>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000e25b5abe>] slab_alloc mm/slab.c:3326 [inline] [<00000000e25b5abe>] __do_kmalloc mm/slab.c:3658 [inline] [<00000000e25b5abe>] __kmalloc+0x161/0x2c0 mm/slab.c:3669 [<00000000a1ae188a>] kmalloc include/linux/slab.h:552 [inline] [<00000000a1ae188a>] sk_prot_alloc+0xd6/0x170 net/core/sock.c:1608 [<00000000ded25bbe>] sk_alloc+0x35/0x2f0 net/core/sock.c:1662 [<000000002ecae075>] llc_sk_alloc+0x35/0x170 net/llc/llc_conn.c:950 [<00000000551f7c47>] llc_ui_create+0x7b/0x140 net/llc/af_llc.c:173 [<0000000029027f0e>] __sock_create+0x164/0x250 net/socket.c:1430 [<000000008bdec225>] sock_create net/socket.c:1481 [inline] [<000000008bdec225>] __sys_socket+0x69/0x110 net/socket.c:1523 [<00000000b6439228>] __do_sys_socket net/socket.c:1532 [inline] [<00000000b6439228>] __se_sys_socket net/socket.c:1530 [inline] [<00000000b6439228>] __x64_sys_socket+0x1e/0x30 net/socket.c:1530 [<00000000cec820c1>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<000000000c32554f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 BUG: memory leak unreferenced object 0xffff88811d750d00 (size 224): comm "syz-executor907", pid 7074, jiffies 4294943781 (age 8.600s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 f0 0c 24 81 88 ff ff 00 68 2b 20 81 88 ff ff ...$.....h+ .... backtrace: [<0000000053026172>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000053026172>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000053026172>] slab_alloc_node mm/slab.c:3269 [inline] [<0000000053026172>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000fa8f3c30>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<00000000d96fdafb>] alloc_skb include/linux/skbuff.h:1058 [inline] [<00000000d96fdafb>] alloc_skb_with_frags+0x5f/0x250 net/core/skbuff.c:5327 [<000000000a34a2e7>] sock_alloc_send_pskb+0x269/0x2a0 net/core/sock.c:2225 [<00000000ee39999b>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242 [<00000000e034d810>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933 [<00000000c0bc8445>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000c0bc8445>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<000000003b687167>] __sys_sendto+0x148/0x1f0 net/socket.c:1964 [<00000000922d78d9>] __do_sys_sendto net/socket.c:1976 [inline] [<00000000922d78d9>] __se_sys_sendto net/socket.c:1972 [inline] [<00000000922d78d9>] __x64_sys_sendto+0x2a/0x30 net/socket.c:1972 [<00000000cec820c1>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<000000000c32554f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Mike Manning authored
[ Upstream commit 72f7cfab ] IPv6 does not consider if the socket is bound to a device when binding to an address. The result is that a socket can be bound to eth0 and then bound to the address of eth1. If the device is a VRF, the result is that a socket can only be bound to an address in the default VRF. Resolve by considering the device if sk_bound_dev_if is set. Signed-off-by:
Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Tested-by:
-
- 31 May, 2019 21 commits
-
-
Greg Kroah-Hartman authored
-
Chris Wilson authored
[ Upstream commit 60b80199 ] After an event is sent, we try to copy it into the user buffer of the first waiter in drm_read() and if the user buffer doesn't have enough room we put it back onto the list. However, we didn't wake up any subsequent waiter, so that event may sit on the list until either a new vblank event is sent or a new waiter appears. Rare, but in the worst case may lead to a stuck process. Testcase: igt/drm_read/short-buffer-wakeup Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.ukSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Arnd Bergmann authored
[ Upstream commit 8ca51047 ] Building with clang shows a variable that is only used by the suspend/resume functions but defined outside of their #ifdef block: sound/soc/ti/davinci-mcasp.c:48:12: error: variable 'context_regs' is not needed and will not be emitted We commonly fix these by marking the PM functions as __maybe_unused, but here that would grow the davinci_mcasp structure, so instead add another #ifdef here. Fixes: 1cc0c054 ("ASoC: davinci-mcasp: Convert the context save/restore to use array") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Chris Lesiak authored
[ Upstream commit 5442dcaa ] This fixes a bug for messages containing both zero length and unidirectional xfers. The function spi_map_msg will allocate dummy tx and/or rx buffers for use with unidirectional transfers when the hardware can only do a bidirectional transfer. That dummy buffer will be used in place of a NULL buffer even when the xfer length is 0. Then in the function __spi_map_msg, if he hardware can dma, the zero length xfer will have spi_map_buf called on the dummy buffer. Eventually, __sg_alloc_table is called and returns -EINVAL because nents == 0. This fix prevents the error by not using the dummy buffer when the xfer length is zero. Signed-off-by:
Chris Lesiak <chris.lesiak@licor.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 26843bb1 ] While the sequencer is reset after each SPI message since commit 880c6d11 ("spi: rspi: Add support for Quad and Dual SPI Transfers on QSPI"), it was never reset for the first message, thus relying on reset state or bootloader settings. Fix this by initializing it explicitly during configuration. Fixes: 0b2182dd ("spi: add support for Renesas RSPI") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit f37d8e67 ] pch_alloc_dma_buf allocated tx, rx DMA buffers which can fail. Further, these buffers are used without a check. The patch checks for these failures and sends the error upstream. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
James Smart authored
[ Upstream commit c95a3b4b ] During debug, it was seen that the driver is issuing commands specific to SLI3 on SLI4 devices. Although the adapter correctly rejected the command, this should not be done. Revise the code to stop sending these commands on a SLI4 adapter. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 03aa4f19 ] Two saa7146/hexium files contain a construct that causes a warning when built with clang: drivers/media/pci/saa7146/hexium_orion.c:210:12: error: stack frame size of 2272 bytes in function 'hexium_probe' [-Werror,-Wframe-larger-than=] static int hexium_probe(struct saa7146_dev *dev) ^ drivers/media/pci/saa7146/hexium_gemini.c:257:12: error: stack frame size of 2304 bytes in function 'hexium_attach' [-Werror,-Wframe-larger-than=] static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) ^ This one happens regardless of KASAN, and the problem is that a constructor to initialize a dynamically allocated structure leads to a copy of that structure on the stack, whereas gcc initializes it in place. Link: https://bugs.llvm.org/show_bug.cgi?id=40776Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix checkpatch warnings] Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
James Smart authored
[ Upstream commit d67f935b ] The FDMI manufacturer value being reported on Linux is inconsistent with other OS's. Set the value to "Emulex Corporation" for consistency. Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit ed713a4a ] clang-8 warns about one function here when KASAN is enabled, even without the 'asan-stack' option: drivers/media/usb/go7007/go7007-fw.c:1551:5: warning: stack frame size of 2656 bytes in function I have reported this issue in the llvm bugzilla, but to make it work with the clang-8 release, a small annotation is still needed. Link: https://bugs.llvm.org/show_bug.cgi?id=38809Signed-off-by:
-
James Hutchinson authored
[ Upstream commit 981fbe3d ] Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323 Users are experiencing problems with the DVBSky S960/S960C USB devices since the following commit: 9d659ae1: ("locking/mutex: Add lock handoff to avoid starvation") The device malfunctions after running for an indeterminable period of time, and the problem can only be cleared by rebooting the machine. It is possible to encourage the problem to surface by blocking the signal to the LNB. Further debugging revealed the cause of the problem. In the following capture: - thread #1325 is running m88ds3103_set_frontend - thread #42 is running ts2020_stat_work a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f [42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 Two i2c messages are sent to perform a reset in m88ds3103_set_frontend: a. 0x07, 0x80 b. 0x07, 0x00 However, as shown in the capture, the regmap mutex is being handed over to another thread (ts2020_stat_work) in between these two messages. >From here, the device responds to every i2c message with an 07 message, and will only return to normal operation following a power cycle. Use regmap_multi_reg_write to group the two reset messages, ensuring both are processed before the regmap mutex is unlocked. Signed-off-by:
James Hutchinson <jahutchinson99@googlemail.com> Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sameer Pujar authored
[ Upstream commit f6ed6491 ] adma driver is using pm_clk_*() interface for managing clock resources. With this it is observed that clocks remain ON always. This happens on Tegra devices which use BPMP co-processor to manage clock resources, where clocks are enabled during prepare phase. This is necessary because clocks to BPMP are always blocking. When pm_clk_*() interface is used on such Tegra devices, clock prepare count is not balanced till remove call happens for the driver and hence clocks are seen ON always. Thus this patch replaces pm_clk_*() with devm_clk_*() framework. Suggested-by:
Mohan Kumar D <mkumard@nvidia.com> Reviewed-by:
Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 608f729c ] Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA memory in get_fw_boot_info() but attempt to free it anyway: drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (!(val & 0x07)) { ^~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); ^~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true if (!(val & 0x07)) { ^~~~~~~~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning dma_addr_t buf_dma; ^ = 0 Skip the call to dma_free_coherent() here. Fixes: 2a991c21 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi") Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 8ead7e81 ] If ohci-platform is runtime suspended, we can currently get an "imprecise external abort" on reboot with ohci-platform loaded when PM runtime is implemented for the SoC. Let's fix this by adding PM runtime support to usb_hcd_platform_shutdown. Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit ad092c02 ] If the specified rcuperf.perf_type is not in the rcu_perf_init() function's perf_ops[] array, rcuperf prints some console messages and then invokes rcu_perf_cleanup() to set state so that a future torture test can run. However, rcu_perf_cleanup() also attempts to end the test that didn't actually start, and in doing so relies on the value of cur_ops, a value that is not particularly relevant in this case. This can result in confusing output or even follow-on failures due to attempts to use facilities that have not been properly initialized. This commit therefore sets the value of cur_ops to NULL in this case and inserts a check near the beginning of rcu_perf_cleanup(), thus avoiding relying on an irrelevant cur_ops value. Signed-off-by:
Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit b813afae ] If the specified rcutorture.torture_type is not in the rcu_torture_init() function's torture_ops[] array, rcutorture prints some console messages and then invokes rcu_torture_cleanup() to set state so that a future torture test can run. However, rcu_torture_cleanup() also attempts to end the test that didn't actually start, and in doing so relies on the value of cur_ops, a value that is not particularly relevant in this case. This can result in confusing output or even follow-on failures due to attempts to use facilities that have not been properly initialized. This commit therefore sets the value of cur_ops to NULL in this case and inserts a check near the beginning of rcu_torture_cleanup(), thus avoiding relying on an irrelevant cur_ops value. Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
Tony Luck authored
[ Upstream commit f19501aa ] There has been a lurking "TBD" in the machine check poll routine ever since it was first split out from the machine check handler. The potential issue is that the poll routine may have just begun a read from the STATUS register in a machine check bank when the hardware logs an error in that bank and signals a machine check. That race used to be pretty small back when machine checks were broadcast, but the addition of local machine check means that the poll code could continue running and clear the error from the bank before the local machine check handler on another CPU gets around to reading it. Fix the code to be sure to only process errors that need to be processed in the poll code, leaving other logged errors alone for the machine check handler to find and process. [ bp: Massage a bit and flip the "== 0" check to the usual !(..) test. ] Fixes: b79109c3 ("x86, mce: separate correct machine check poller and fatal exception handler") Fixes: ed7290d0 ("x86, mce: implement new status bits") Reported-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Link: https://lkml.kernel.org/r/20190312170938.GA23035@agluck-deskSigned-off-by:
-
Kangjie Lu authored
[ Upstream commit 1bbb1c31 ] ipw->attr_memory and ipw->common_memory are assigned with the return value of ioremap. ioremap may fail, but no checks are enforced. The fix inserts the checks to avoid potential NULL pointer dereferences. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Pankaj Gupta authored
[ Upstream commit 4b0a2c5f ] For regular serial ports we do not initialize value of vtermno variable. A garbage value is assigned for non console ports. The value can be observed as a random integer with [1]. [1] vim /sys/kernel/debug/virtio-ports/vport*p* This patch initialize the value of vtermno for console serial ports to '1' and regular serial ports are initiaized to '0'. Reported-by: siliu@redhat.com Signed-off-by:
Pankaj Gupta <pagupta@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9c2ccc32 ] Smatch marks skb->data as untrusted so it warns that "evt_hdr->dlen" can copy up to 255 bytes and we only have room for two bytes. Even if this comes from the firmware and we trust it, the new policy generally is just to fix it as kernel hardenning. I can't test this code so I tried to be very conservative. I considered not allowing "evt_hdr->dlen == 1" because it doesn't initialize the whole variable but in the end I decided to allow it and manually initialized "asic_id" and "asic_ver" to zero. Fixes: e8454ff7 ("[media] drivers:media:radio: wl128x: FM Driver Common sources") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Sowjanya Komatineni authored
[ Upstream commit 01919493 ] Fixes: SPI driver can be built as module so perform SPI controller reset on probe to make sure it is in valid state before initiating transfer. Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
-
