An nf_conntrack_helper from nf_conn_help may become NULL after DNAT.

Observed when TCP port 1720 (Q931_PORT), associated with h323 conntrack
helper, is DNAT'ed to another destination port (e.g. 1730), while
nfqueue is being used for final acceptance (e.g. snort).

This happenned after transition from kernel 4.14 to 5.10.161.

Workarounds:
 * keep the same port (1720) in DNAT
 * disable nfqueue
 * disable/unload h323 NAT helper

$ linux-5.10/scripts/decode_stacktrace.sh vmlinux < /tmp/kernel.log
BUG: kernel NULL pointer dereference, address: 0000000000000084
[..]
RIP: 0010:nf_conntrack_update (net/netfilter/nf_conntrack_core.c:2080 net/netfilter/nf_conntrack_core.c:2134) nf_conntrack
[..]
nfqnl_reinject (net/netfilter/nfnetlink_queue.c:237) nfnetlink_queue
nfqnl_recv_verdict (net/netfilter/nfnetlink_queue.c:1230) nfnetlink_queue
nfnetlink_rcv_msg (net/netfilter/nfnetlink.c:241) nfnetlink
[..]

Fixes: ee04805f ("netfilter: conntrack: make conntrack userspace helpers work again")
Signed-off-by: Tijs Van Buggenhout <tijs.van.buggenhout@axsguard.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

At the end of `nft_bitwise_reduce`, there is a loop which is intended to
update the bitwise expression associated with each tracked destination
register.  However, currently, it just updates the first register
repeatedly.  Fix it.

Fixes: 34cc9e52 ("netfilter: nf_tables: cancel tracking for clobbered destination registers")
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The nla_nest_start_noflag() function may fail and return NULL;
the return value needs to be checked.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: d54725cd ("netfilter: nf_tables: support for multiple devices per netdev hook")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Two dma_wmb() are added in the XDP TX path to ensure proper ordering of
descriptor and buffer updates:
1. A dma_wmb() is added after updating the last BD to make sure
   the updates to rest of the descriptor are visible before
   transferring ownership to FEC.
2. A dma_wmb() is also added after updating the bdp to ensure these
   updates are visible before updating txq->bd.cur.
3. Start the xmit of the frame immediately right after configuring the
   tx descriptor.

Fixes: 6d6b39f1 ("net: fec: add initial XDP support")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I would like to be copied on new patches submitted on this driver.
I am relatively familiar with the code, having practically maintained
it for a while.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HW adds segment size to the payload length
in the IPv6 header. Fix payload length to
just TCP header length instead of 'TCP header
size + IPv6 header size'.

Fixes: 86d74760 ("octeontx2-pf: TCP segmentation offload support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid early devlink info return if errors arise with MCDI commands
executed for getting the required info from the device. The rationale
is some commands can fail but later ones could still give useful data.
Moreover, some nvram partitions could not be present which needs to be
handled as a non error.

The specific errors are reported through system messages and if any
error appears, it will be reported generically through extack.

Fixes 14743ddd ("sfc: add devlink info support for ef100")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It
can be reproduced by:

- smc_run nginx
- smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port>

 BUG: kernel NULL pointer dereference, address: 0000000000000014
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G        W   E      6.4.0-rc1+ #42
 Workqueue: smc_hs_wq smc_listen_work [smc]
 RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc]
 RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06
 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000
 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00
 RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000
 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180
 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001
 FS:  0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib]
  ? smcr_buf_map_link+0x24b/0x290 [smc]
  ? __smc_buf_create+0x4ee/0x9b0 [smc]
  smc_clc_send_accept+0x4c/0xb0 [smc]
  smc_listen_work+0x346/0x650 [smc]
  ? __schedule+0x279/0x820
  process_one_work+0x1e5/0x3f0
  worker_thread+0x4d/0x2f0
  ? __pfx_worker_thread+0x10/0x10
  kthread+0xe5/0x120
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x2c/0x50
  </TASK>

During the CLC handshake, server sequentially tries available SMCRv2
and SMCRv1 devices in smc_listen_work().

If an SMCRv2 device is found. SMCv2 based link group and link will be
assigned to the connection. Then assumed that some buffer assignment
errors happen later in the CLC handshake, such as RMB registration
failure, server will give up SMCRv2 and try SMCRv1 device instead. But
the resources assigned to the connection won't be reset.

When server tries SMCRv1 device, the connection creation process will
be executed again. Since conn->lnk has been assigned when trying SMCRv2,
it will not be set to the correct SMCRv1 link in
smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to
correct SMCRv1 link group but conn->lnk points to the SMCRv2 link
mistakenly.

Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx]
will be accessed. Since the link->link_idx is not correct, the related
MR may not have been initialized, so crash happens.

 | Try SMCRv2 device first
 |     |-> conn->lgr:	assign existed SMCRv2 link group;
 |     |-> conn->link:	assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC);
 |     |-> sndbuf & RMB creation fails, quit;
 |
 | Try SMCRv1 device then
 |     |-> conn->lgr:	create SMCRv1 link group and assign;
 |     |-> conn->link:	keep SMCRv2 link mistakenly;
 |     |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0]
 |         initialized.
 |
 | Then smc_clc_send_confirm_accept() accesses
 | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash.
 v

This patch tries to fix this by cleaning conn->lnk before assigning
link. In addition, it is better to reset the connection and clean the
resources assigned if trying SMCRv2 failed in buffer creation or
registration.

Fixes: e49300a6 ("net/smc: add listen processing for SMC-Rv2")
Link: https://lore.kernel.org/r/20220523055056.2078994-1-liuyacan@corp.netease.com/Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()

  Tests passed: 201
  Tests failed:   0
  Cannot remove namespace file "/run/netns/ns1": No such file or directory

This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.

Redirect the error message to /dev/null to mute it.

V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2

Fixes: b60417a9 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NAPI gets called with budget of 0 from netpoll, which has interrupts
disabled. We should try to free some space on Tx rings and nothing
else.

Specifically do not try to handle XDP TX or try to refill Rx buffers -
we can't use the page pool from IRQ context. Don't check if IRQs moved,
either, that makes no sense in netpoll. Netpoll calls _all_ the rings
from whatever CPU it happens to be invoked on.

In general do as little as possible, the work quickly adds up when
there's tens of rings to poll.

The immediate stack trace I was seeing is:

    __do_softirq+0xd1/0x2c0
    __local_bh_enable_ip+0xc7/0x120
    </IRQ>
    <TASK>
    page_pool_put_defragged_page+0x267/0x320
    mlx5e_free_xdpsq_desc+0x99/0xd0
    mlx5e_poll_xdpsq_cq+0x138/0x3b0
    mlx5e_napi_poll+0xc3/0x8b0
    netpoll_poll_dev+0xce/0x150

AFAIU page pool takes a BH lock, releases it and since BH is now
enabled tries to run softirqs.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 60bbf7ee ("mlx5: use page_pool for xdp_return_frame call")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tls: rx: strp: fix inline crypto offload

The local strparser version I added to TLS does not preserve
decryption status, which breaks inline crypto (NIC offload).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When receive buffer is small, or the TCP rx queue looks too
complicated to bother using it directly - we allocate a new
skb and copy data into it.

We already use sk->sk_allocation... but nothing actually
sets it to GFP_ATOMIC on the ->sk_data_ready() path.

Users of HW offload are far more likely to experience problems
due to scheduling while atomic. "Copy mode" is very rarely
triggered with SW crypto.

Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When receive buffer is small we try to copy out the data from
TCP into a skb maintained by TLS to prevent connection from
stalling. Unfortunately if a single record is made up of a mix
of decrypted and non-decrypted skbs combining them into a single
skb leads to loss of decryption status, resulting in decryption
errors or data corruption.

Similarly when trying to use TCP receive queue directly we need
to make sure that all the skbs within the record have the same
status. If we don't the mixed status will be detected correctly
but we'll CoW the anchor, again collapsing it into a single paged
skb without decrypted status preserved. So the "fixup" code will
not know which parts of skb to re-encrypt.

Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We'll need to copy input skbs individually in the next patch.
Factor that code out (without assuming we're copying a full record).
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We call tls_rx_msg_size(skb) before doing skb->len += chunk.
So the tls_rx_msg_size() code will see old skb->len, most
likely leading to an over-read.

Worst case we will over read an entire record, next iteration
will try to trim the skb but may end up turning frag len negative
or discarding the subsequent record (since we already told TCP
we've read it during previous read but now we'll trim it out of
the skb).

Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a record is partially decrypted we'll have to CoW it, anyway,
so go into copy mode and allocate a writable skb right away.

This will make subsequent fix simpler because we won't have to
teach tls_strp_msg_make_copy() how to copy skbs while preserving
decrypt status.
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

alloc_skb_with_frags() fills in page frag sizes but does not
set skb->len and skb->data_len. Set those correctly otherwise
device offload will most likely generate an empty skb and
hit the BUG() at the end of __skb_nsg().

Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb->len covers the entire skb, including the frag_list.
In fact we're guaranteed that rxm->full_len <= skb->len,
so since the change under Fixes we were not checking decrypt
status of any skb but the first.

Note that the skb_pagelen() added here may feel a bit costly,
but it's removed by subsequent fixes, anyway.
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 86b259f6 ("tls: rx: device: bound the frag walk")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than
the calculated "min" value, but greater than zero, the logic sets
tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in
cdc_ncm_fill_tx_frame() where all the data is handled.

For small values of dwNtbOutMaxSize the memory allocated during
alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to
how size is aligned at alloc time:
	size = SKB_DATA_ALIGN(size);
        size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
Thus we hit the same bug that we tried to squash with
commit 2be6d4d1 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")

Low values of dwNtbOutMaxSize do not cause an issue presently because at
alloc_skb() time more memory (512b) is allocated than required for the
SKB headers alone (320b), leaving some space (512b - 320b = 192b)
for CDC data (172b).

However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).

Consequently the SKB bounds checking semantics fails and panics:

skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:113!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic net/core/skbuff.c:113 [inline]
RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118
[snip]
Call Trace:
 <TASK>
 skb_put+0x151/0x210 net/core/skbuff.c:2047
 skb_put_zero include/linux/skbuff.h:2422 [inline]
 cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline]
 cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308
 cdc_ncm_tx_fixup+0xa3/0x100

Deal with too low values of dwNtbOutMaxSize, clamp it in the range
[USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure
enough data space is allocated to handle CDC data by making sure
dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.

Fixes: 289507d3 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Cc: stable@vger.kernel.org
Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d
Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, xfrm, bluetooth and netfilter.

  Current release - regressions:

   - ipv6: fix RCU splat in ipv6_route_seq_show()

   - wifi: iwlwifi: disable RFI feature

  Previous releases - regressions:

   - tcp: fix possible sk_priority leak in tcp_v4_send_reset()

   - tipc: do not update mtu if msg_max is too small in mtu negotiation

   - netfilter: fix null deref on element insertion

   - devlink: change per-devlink netdev notifier to static one

   - phylink: fix ksettings_set() ethtool call

   - wifi: mac80211: fortify the spinlock against deadlock by interrupt

   - wifi: brcmfmac: check for probe() id argument being NULL

   - eth: ice:
      - fix undersized tx_flags variable
      - fix ice VF reset during iavf initialization

   - eth: hns3: fix sending pfc frames after reset issue

  Previous releases - always broken:

   - xfrm: release all offloaded policy memory

   - nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment()

   - vsock: avoid to close connected socket after the timeout

   - dsa: rzn1-a5psw: enable management frames for CPU port

   - eth: virtio_net: fix error unwinding of XDP initialization

   - eth: tun: fix memory leak for detached NAPI queue.

  Misc:

   - MAINTAINERS: sctp: move Neil to CREDITS"

* tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  MAINTAINERS: skip CCing netdev for Bluetooth patches
  mdio_bus: unhide mdio_bus_init prototype
  bridge: always declare tunnel functions
  atm: hide unused procfs functions
  net: isa: include net/Space.h
  Revert "ARM: dts: stm32: add CAN support on stm32f746"
  netfilter: nft_set_rbtree: fix null deref on element insertion
  netfilter: nf_tables: fix nft_trans type confusion
  netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
  net: wwan: t7xx: Ensure init is completed before system sleep
  net: selftests: Fix optstring
  net: pcs: xpcs: fix C73 AN not getting enabled
  net: wwan: iosm: fix NULL pointer dereference when removing device
  vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
  mailmap: add entries for Nikolay Aleksandrov
  igb: fix bit_shift to be in [1..8] range
  net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset
  cassini: Fix a memory leak in the error handling path of cas_init_one()
  tun: Fix memory leak for detached NAPI queue.
  can: kvaser_pciefd: Disable interrupts in probe error path
  ...

Pull media fixes from Mauro Carvalho Chehab:
 "Several fixes for the dvb core and drivers:

   - fix UAF and null pointer de-reference in DVB core

   - fix kernel runtime warning for blocking operation in wait_event*()
     in dvb core

   - fix write size bug in DVB conditional access core

   - fix dvb demux continuity counter debug check logic

   - randconfig build fixes in pvrusb2 and mn88443x

   - fix memory leak in ttusb-dec

   - fix netup_unidvb probe-time error check logic

   - improve error handling in dw2102 if it can't retrieve DVB MAC
     address"

* tag 'media/v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221
  media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()
  media: dvb-core: Fix use-after-free due to race at dvb_register_device()
  media: dvb-core: Fix use-after-free due on race condition at dvb_net
  media: dvb-core: Fix use-after-free on race condition at dvb_frontend
  media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table
  media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()
  media: dvb_ca_en50221: fix a size write bug
  media: netup_unidvb: fix irq init by register it at the end of probe
  media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address
  media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()
  media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer
  media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()
  media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()
  media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()
  media: netup_unidvb: fix use-after-free at del_timer()
  media: dvb_demux: fix a bug for the continuity counter
  media: pvrusb2: fix DVB_CORE dependency

Merge tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2023-05-18

this is a pull request of 7 patches for net/master.

The first 6 patches are by Jimmy Assarsson and fix several bugs in the
kvaser_pciefd driver.

The latest patch is from me and reverts a change in stm32f746.dtsi
that causes build errors due to a missing dependent patch.

* tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  Revert "ARM: dts: stm32: add CAN support on stm32f746"
  can: kvaser_pciefd: Disable interrupts in probe error path
  can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt
  can: kvaser_pciefd: Empty SRB buffer in probe
  can: kvaser_pciefd: Call request_irq() before enabling interrupts
  can: kvaser_pciefd: Clear listen-only bit if not explicitly requested
  can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()
====================

Link: https://lore.kernel.org/r/20230518073241.1110453-1-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Florian Westphal says:

====================
Netfilter fixes for net

1. Silence warning about unused variable when CONFIG_NF_NAT=n, from Tom Rix.
2. nftables: Fix possible out-of-bounds access, from myself.
3. nftables: fix null deref+UAF during element insertion into rbtree,
   also from myself.

* tag 'nf-23-05-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_set_rbtree: fix null deref on element insertion
  netfilter: nf_tables: fix nft_trans type confusion
  netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
====================

Link: https://lore.kernel.org/r/20230517123756.7353-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v6.4

A lot of fixes this time, for both the stack and the drivers. The
brcmfmac resume fix has been reported by several people so I would say
it's the most important here. The iwlwifi RFI workaround is also
something which was reported as a regression recently.

* tag 'wireless-2023-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits)
  wifi: b43: fix incorrect __packed annotation
  wifi: rtw88: sdio: Always use two consecutive bytes for word operations
  mac80211_hwsim: fix memory leak in hwsim_new_radio_nl
  wifi: iwlwifi: mvm: Add locking to the rate read flow
  wifi: iwlwifi: Don't use valid_links to iterate sta links
  wifi: iwlwifi: mvm: don't trust firmware n_channels
  wifi: iwlwifi: mvm: fix OEM's name in the tas approved list
  wifi: iwlwifi: fix OEM's name in the ppag approved list
  wifi: iwlwifi: mvm: fix initialization of a return value
  wifi: iwlwifi: mvm: fix access to fw_id_to_mac_id
  wifi: iwlwifi: fw: fix DBGI dump
  wifi: iwlwifi: mvm: fix number of concurrent link checks
  wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlock
  wifi: iwlwifi: mvm: don't double-init spinlock
  wifi: iwlwifi: mvm: always free dup_data
  wifi: mac80211: recalc chanctx mindef before assigning
  wifi: mac80211: consider reserved chanctx for mindef
  wifi: mac80211: simplify chanctx allocation
  wifi: mac80211: Abort running color change when stopping the AP
  wifi: mac80211: fix min center freq offset tracing
  ...
====================

Link: https://lore.kernel.org/r/20230517151914.B0AF6C433EF@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As requested by Marcel skip netdev for Bluetooth patches.
Bluetooth has its own mailing list and overloading netdev
leads to fewer people reading it.

Link: https://lore.kernel.org/netdev/639C8EA4-1F6E-42BE-8F04-E4A753A6EFFC@holtmann.org/Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517014253.1233333-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mdio_bus_init() is either used as a local module_init() entry,
or it gets called in phy_device.c. In the former case, there
is no declaration, which causes a warning:

drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes]

Remove the #ifdef around the declaration to avoid the warning..
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still
defined but have no prototype or caller. This causes a W=1 warning for
the missing prototypes:

net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes]
net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes]

The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING,
and I coulnd't easily figure out the right set of #ifdefs, so just
move the declarations out of the #ifdef to avoid the warning,
at a small cost in code size over a more elaborate fix.

Fixes: 188c67dd ("net: bridge: vlan options: add support for tunnel id dumping")
Fixes: 569da082 ("net: bridge: vlan options: add support for tunnel mapping set/del")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230516194625.549249-3-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When CONFIG_PROC_FS is disabled, the function declarations for some
procfs functions are hidden, but the definitions are still build,
as shown by this compiler warning:

net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes]
net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes]
net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]

Add another #ifdef to leave these out of the build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-2-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The legacy drivers that still get called from net/Space.c have prototypes
in net/Space, but this header is not included in most of the files that
define those functions:

drivers/net/ethernet/cirrus/cs89x0.c:1649:28: error: no previous prototype for 'cs89x0_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/8390/ne.c:947:28: error: no previous prototype for 'ne_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/8390/smc-ultra.c:167:28: error: no previous prototype for 'ultra_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/amd/lance.c:438:28: error: no previous prototype for 'lance_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/3com/3c515.c:422:20: error: no previous prototype for 'tc515_probe' [-Werror=missing-prototypes]

Add the inclusion to avoids the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 0920ccdf.

The commit 0920ccdf ("ARM: dts: stm32: add CAN support on
stm32f746") depends on the patch "dt-bindings: mfd: stm32f7: add
binding definition for CAN3" [1], which is not in net/main, yet. This
results in a parsing error of "stm32f746.dtsi".

So revert this commit.

[1] https://lore.kernel.org/all/20230423172528.1398158-2-dario.binacchi@amarulasolutions.com

Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305172108.x5acbaQG-lkp@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202305172130.eGGEUhpi-lkp@intel.com
Fixes: 0920ccdf ("ARM: dts: stm32: add CAN support on stm32f746")
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20230517181950.1106697-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Merge tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:

 - sgx test fix for false negatives

 - ftrace output is hard to parses and it masks inappropriate skips etc.
   This fix addresses the problems by integrating with kselftest runner

* tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Improve integration with kselftest runner
  selftests/sgx: Add "test_encl.elf" to TEST_FILES

Pull nfsd fixes from Chuck Lever:

 - A collection of minor bug fixes

* tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Remove open coding of string copy
  SUNRPC: Fix trace_svc_register() call site
  SUNRPC: always free ctxt when freeing deferred request
  SUNRPC: double free xprt_ctxt while still in use
  SUNRPC: Fix error handling in svc_setup_socket()
  SUNRPC: Fix encoding of accepted but unsuccessful RPC replies
  lockd: define nlm_port_min,max with CONFIG_SYSCTL
  nfsd: define exports_proc_ops with CONFIG_PROC_FS
  SUNRPC: Avoid relying on crypto API to derive CBC-CTS output IV

Pull tpm fixes from Jarkko Sakkinen:
 "Three bug fixes for recently discovered issues"

* tag 'tpmdd-v6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm/tpm_tis: Disable interrupts for more Lenovo devices
  tpm: Prevent hwrng from activating during resume
  tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume

This function is only used when CONFIG_TRACE_BRANCH_PROFILING is set and
DISABLE_BRANCH_PROFILING is not set, and the declaration is hidden
behind this combination of tests.

But that causes a warning when building with CONFIG_TRACING_BRANCHES,
since that sets DISABLE_BRANCH_PROFILING for the tracing code, and the
declaration is thus hidden:

  kernel/trace/trace_branch.c:205:6: error: no previous prototype for 'ftrace_likely_update' [-Werror=missing-prototypes]

Move the declaration out of the #ifdef to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem():

general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
 nft_add_set_elem+0x14b0/0x2990
  nf_tables_newsetelem+0x528/0xb30

Furthermore, there is a possible use-after-free while iterating,
'node' can be free'd so we need to cache the next value to use.

Fixes: c9e6978e ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Florian Westphal <fw@strlen.de>

nft_trans_FOO objects all share a common nft_trans base structure, but
trailing fields depend on the real object size. Access is only safe after
trans->msg_type check.

Check for rule type first.  Found by code inspection.

Fixes: 1a94e38d ("netfilter: nf_tables: add NFTA_RULE_ID attribute")
Signed-off-by: Florian Westphal <fw@strlen.de>

gcc with W=1 and ! CONFIG_NF_NAT
net/netfilter/nf_conntrack_netlink.c:3463:32: error:
  ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]
 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
      |                                ^~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:2979:33: error:
  ‘any_addr’ defined but not used [-Werror=unused-const-variable=]
 2979 | static const union nf_inet_addr any_addr;
      |                                 ^~~~~~~~

These variables use is controlled by CONFIG_NF_NAT, so should their definitions.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

When the system attempts to sleep while mtk_t7xx is not ready, the driver
cannot put the device to sleep:
[   12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state
[   12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14
[   12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14
[   12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14
[   12.764776] PM: Some devices failed to suspend, or early wake event detected

Mediatek confirmed the device can take a rather long time to complete
its initialization, so wait for up to 20 seconds until init is done.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cited commit added a stray colon to the 'v' option. That makes the
option work incorrectly.

ex:
tools/testing/selftests/net# ./fib_nexthops.sh -v
(should enable verbose mode, instead it shows help text due to missing arg)

Fixes: 5feba472 ("selftests: fib_nexthops: Make ping timeout configurable")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The XPCS expects clause 73 (copper backplane) autoneg to follow the
ethtool autoneg bit. It actually did that until the blamed
commit inaptly replaced state->an_enabled (coming from ethtool) with
phylink_autoneg_inband() (coming from the device tree or struct
phylink_config), as part of an unrelated phylink_pcs API conversion.

Russell King suggests that state->an_enabled from the original code was
just a proxy for the ethtool Autoneg bit, and that the correct way of
restoring the functionality is to check for this bit in the advertising
mask.

Fixes: 11059740 ("net: pcs: xpcs: convert to phylink_pcs_ops")
Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>